Ubuntu :: Gimp Single Window Mode?

Apr 9, 2011

i have recently been spending some time with gimp, i find it a very good replacement for photoshop and i find it easer to use. the only thing that bothers me so much about gimp is that everything is in separate windows.is there a way to make a sing windowed mode. if there is please tell me because this has really been bothering me...

View 9 Replies


Fedora :: GIMP Single-Window Mode Almost Ready - Hardware Acceleration Planned?

Aug 25, 2011

Something to look forward to.[URL]..

View 14 Replies View Related

Ubuntu / Apple :: Single Window GIMP 2.7.2 For OSX Leopard?

Oct 11, 2010

i created an installer for gimp 2.7.2 for snow leopard. check it out

View 1 Replies View Related

General :: Emergency Mode Can Mount HDD With FS Error / Not In Rescue Or Single User-mode

Dec 1, 2010

My linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.

My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.

View 3 Replies View Related

Red Hat :: Boot In Emergency Mode (not Single User Mode)

Mar 10, 2011

I need boot in emergency mode (not single user mode), from docs:


in red hat enterprise 5 it's ok, not in red hat 6.

View 1 Replies View Related

Ubuntu :: Gimp Batch Mode - Closing Images When Done With Them?

Jan 4, 2011

I need to close images I work with when I'm done with them. As an example scenario, I can open several images and work on them, but every time I open them they create new instances in gimp, meaning the gimp could in the end be using several gigs of ram for images I can't even see are there.Also, I can't start gimp for batch only (Using 2.7 dev version)Code:$ gimp -i -b "(script-fu-thing 1)"This is a development version of GIMP. Debug messages may appear here.(gimp:11407): Gimp-Core-CRITICAL **: gimp_viewable_get_stock_id: assertion `GIMP_IS_VIEWABLE (viewable)' failedgimp: fatal error: Segmentation fault

View 1 Replies View Related

Ubuntu :: Move The Window Control Buttons When The Window Is In Full Screen Mode?

May 3, 2011

How do I move the Window control buttons when the window is in full screen mode? I.e.: I know how to go into gconf-editor:

gconf-editor --> apps --> metacity --> general --> button layout = ":minimize,maximize,close"
(I've intentionally disabled the menu...)

What I want is my window controls to be on the right side of the window when the window is in full screen mode.

Also I've had an issue with the Unity dockbar glitching out. I can still click on the buttons (i.e. the logout button) but it displays like a nintendo game inserted crooked. Is there a way to 'restart' unity without log out/ log in?

Any one else experienced any glitches with unity auto hiding/showing?

View 4 Replies View Related

Ubuntu :: How To Fix Window Lay Out Of GIMP In Dell Inspiron Mini

Apr 4, 2010

How to fix window lay out of GIMP in Dell Inspiron mini. Because every time I open GIMP the layout change and difficult to work ?I found GIMP -2.6.8 version how can I install this version to my computer. Since, I have some problems when using gimp-2.4.5.

View 2 Replies View Related

Ubuntu :: Gimp Batch Mode - Predetermined Layer On Another Image - Export As Png And Discard Changes

Jan 3, 2011

I want a simple short gimp batch script that will take one image, paste it into a predetermined layer on another image, export as png and discard changes. Unfortunately, I can't find any tutorials on using gimp batch. Anyone know any such tutorials (Or better yet, what my script needs to be)

So far this is what I have. I need a way to loop through the layers to check the name of them, I also need a way to ditch the previously opened files from memory (Otherwise gimp still has both images in memory) (I'm going to mark this solved so I can make a cleaner post once I get it together)


View 1 Replies View Related

Ubuntu :: Get Into Single User Mode In 10.04?

Sep 7, 2010

How do I get into Single User Mode in 10.04?

The grub menu seems to be gone in 10.04, and the computer boots in 2 seconds. It's great that it boots fast, but there has to be some way to specify boot options?

/etc/default/grub says the timeout is 10, but that doesn't seem to be the case.

View 4 Replies View Related

Ubuntu :: Switch Between Single/dual Monitor Mode?

Jan 28, 2011

I recently hooked my television up to my computer as a second monitor so that I can watch videos on it. However, I don't always want to be in dual monitor mode. I've found that running "gksudo nvidia-settings" allows me to switch between the two modes without restarting X if I change some settings around and click "apply".

Is there a way I could setup two scripts to handle this process? The main problem I'm encountering is the fact that I change all the settings through the nvidia-settings graphical interface; therefore, I have no idea what's actually happening behind the scenes, so I don't know how to go about putting the two scripts together (what commands to issue, etc.).

View 7 Replies View Related

Fedora :: Single User Mode?

Mar 22, 2009

what things can i do in single user mode?is there a guide out there can help me out how to navigate in single user mode?in links that focus only on user user mode?being in single user mode in other istro all the same? debian, fedora, suse. etc

View 4 Replies View Related

General :: Always Single User Mode

Aug 10, 2010

I've created Oracle Enterprise 5 Virtual machine. It was running fine but not sure what went wrong and now when ever I reboot the machine, it goes to single user mode. If I enter "init 5" command it boots to multi-user X11 mode without any problem.I checked inittab file and default line has id 5. So it looks OK. What else can be wrong?

View 15 Replies View Related

Server :: Cannot Get Out Of Single User Mode

Mar 18, 2011

I am running redhat ES 5 on a dell server and recently, I ran into a snag where I was able to reduce a partition (ext3) but could not run resize2fs (mismatch between physical and logical blocks (i never found a solution to this). In any case I decided to log in a single user mode (appended 'single' at the GRUB loader prompt) and now I am always taken to this single user mode every single time I reboot and can't seem to get out of it. I have tried init 5 (runlevel that the system is set to boot into by default) but that does nothing (no message on the # prompt).Of course, I have 2 problems here:

1) partition issue
2) cannot log out of single user mode.

View 6 Replies View Related

Ubuntu Servers :: Single User Mode Not Taking Password?

May 2, 2010

I want to fix my disks with fsck but using sudo init 1 is not allowing me in. It shuts my services down, then gives a "Give root password for maintenance" prompt. I've tried my password, but it rejects it.

View 3 Replies View Related

Ubuntu / Apple :: Imac G4 Eject Cd In Single User Mode From Osx?

Jul 12, 2010

I would like to install ubuntu on my imac g4 but osx won't boot so I wanted to
to use ubuntu is there any way to eject cd from single user mode?

View 5 Replies View Related

Ubuntu :: In 10.04 Get Into Single User Mode With Out Entering The Root Password?

May 8, 2011

in ubuntu 10.04 how to get into single user mode with out entering the root user password

View 1 Replies View Related

General :: Can Only Login To Single User Mode

Mar 22, 2010

I'm running debian lenny. Suddenly when I rebooted my system I was unable to login. I type root and the password and it tells me the login is incorrect.If I boot into single user mode, it accepts the password just fine. Looking in the /etc/shadow file, it appears to be fine as well.Running passwd to set a new password sets a new password just fine, i can login to single user mode with the new password, however, I cannot login at a higher runlevel with the password.

If I delete a password in the /etc/shadow file, then try to login as that user, it simply says "Login Incorrect" without even asking for a password.

View 14 Replies View Related

General :: What Is Single-user Mode In Debian?

Oct 27, 2009

Upon OS start-up Debian gives a choice, one is just simply start Debian, another line to start Debian, but with brackets (single-user mode). What's this for? And when and why do you need to use this?

View 2 Replies View Related

Red Hat :: Bootalbe In Single User Mode Without Password

Mar 6, 2010

Still working scanning results, this time with DISA's SRR scripts.More than one scanning package complains about;The UNIX host is bootable in single user mode without a password..So, I assume in /etc/passwd there is an entry that corrects this?what is the specific syntax and where does it go ?

View 2 Replies View Related

CentOS 5 :: Get Into Single User Mode (maintenance)?

Aug 6, 2011

I have a system with a fair amount of software on it. The system stopped working due to a hard drive error. The system have 5 hards drive ( 1T). I need to get into single user mode (maintenance) as some how I messed up the root password. When starting up I get the time out screen press esc and it takes me to GNU GRUB version 0.97 screen In this screen there are 6 different lines

CentOS (2.6.18-238.12.1.el5PAE)
CentOS (2.6.18-238.12.1.el5)
CentOS (2.6.18-238.9.1.el5PAE)
CentOS (2.6.18-238.9.1.el5PAE)
CentOS (2.6.18-238.el5PAE)
CentOS base (2.6.18-238.el5)

I move the arrow down to CentOS base (2.6.18-238.el5) and pressed 'e' Then I get three lines


View 2 Replies View Related

Ubuntu Multimedia :: Gimp 2.7 And Python (Import Error - No Module Named Gimp)

Mar 2, 2010

If you had Gimp 2.6 (with gimp-plugin-registry installed) and installed Gimp 2.7 to try its new goodies, but Layer Effects are not showing, and when executing "gimp" from console you get these *nasty* errors:

This is a development version of GIMP. Debug messages may appear here.
gimp-user-install: migrating from /home/user/.gimp-2.6
Traceback (most recent call last):
File "/usr/lib/gimp/2.0/plug-ins/layerfx.py", line 23, in <module>
import gimp, gimpplugin, math
ImportError: No module named gimp .....

If you haven't install the 2.7 version yet. Before upgrading, backup "python" directory and then just restore it after installing 2.7.

View 6 Replies View Related

Ubuntu Installation :: Gimp - Gimp-help-en - On 10.04 Lucid Lynx - Installing Other Applications And Preforming System Tasks?

Jun 12, 2010

Some of you may have had with issues after installing GIMP on Lucid Lynx 10.04. Which may be directly related to "gimp-help-en", which could prevent you from installing other applications and preforming system tasks. If so, use this method to fix it.

Process: (Terminal > $ sudo apt-get install gimp)

1. After installing Gimp go to the terminal:

2. Then load up the language support application:

3. Then it will ask you to install the "gimp-help-en", confirm it.

4. Fix'd

I think this issue is directly linked to a systems with multiple languages, but I haven't been able to test this theory out yet.

View 3 Replies View Related

Ubuntu :: Boot Into Single User Mode Or Escape Out Of This GDM / X11 Fail Cycle?

Jul 3, 2011

I installed Ubuntu 11.04 and it refuses to show me a boot menu so I can select single user mode. When it does boot, it continues to cycle as X11 fails, but will not let me change into any of the consoles via control+shift+1-7 or control C or any command. X11/GDM continues to cycle as I hear my video card keep spinning up and down. In every version prior, after 3-4 fails it would give you a shell and say, ok it failed. how to boot into single user mode or escape out of this GDM/X11 fail cycle?

View 1 Replies View Related

Fedora :: Recording Audio In Single User Mode?

Mar 29, 2011

I'm just working on fedora for the first time for my proj. So having many difficulties. My first doubt is that is it possible to record audio in single user mode using fedora? I need it for my proj work. I tried arecord and rec in single user mode.. I'm getting an error stating pulse audio connect error.

View 1 Replies View Related

Debian :: Force Single User Mode On Sun Ultra 5

Apr 26, 2010

I have successfully installed Debian on a Sparc Ultra5, 270MHz SparcIIi CPU, 384MB RAM, 40GB HD. However, once Debian tries to load Gnome (right before the login screen) the screen goes blank, and so the machine becomes unusable. I booted of the NetInstall CD, into rescue mode, and executed a shell, but apparently there is currently a problem when running nano from a live CD, so I can not edit the xorg.conf file when I boot the live CD. So, I would like to just boot the install into single user mode, but I dont know how. Currently, when the Ultra5 is powered on, it tries to boot with command "boot", so I hit "Stop A". From there I type "boot Disk1" to boot Debian normally. To boot from a CD, I would type "boot cdrom" So any idea on how I can boot from Disk1 in Single User Mode?

My only other idea is to hook up another monitor I have which may be able to deal with whatever resolution Gnome is defaulting to. However, Id rather just boot into single user mode.

View 4 Replies View Related

General :: What Are Advantage Of Getting Into Single User Mode Or Its Purpose?

May 10, 2009

What good does getting into single user mode do?And what's the basic purpose of it , i.e is it maintaining purpose???

View 2 Replies View Related

Server :: How To Boot Into Single User Mode With Openindiana?

Mar 7, 2011

does anyone know how to boot into single user mode with openindiana?

View 3 Replies View Related

Software :: Lock Single User Mode With Password

May 8, 2009

How to lock the single user mode in linux with a password....??

View 1 Replies View Related

Red Hat :: Single User Mode Without Boot Loader Password And Without CD?

Apr 10, 2010

I need to recover the root password or reset it. For this, I am trying to follow the following steps to get into the single-user mode & where exactly I am getting stuck: 1. Reboot the machine2. Press <esc>3. At the boot loader screen, i have 'Red Hat Enterprise Linux Server ($version info)' highlighted. 4. Simply pressing 'e' (for editing) does not work (does nothing). 5. I have the option to press 'p' to enter boot-loader password and then go into the single user mode.What if I don't know the boot loader password as well & I want to get into the single-user mode WITHOUT using a boot CD? Is this possible? If so, please share the procedure to do so.

View 7 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved