When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".
PDC is ClearOS 5.2 named "dc0" Samba file server is CentOS 5.5 x86_64 named "sysimage" dc0 Samba version is samba - 3.5.5-1.1.v5.i386 sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64
dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.
I have proftpd @ Ubuntu 9.04 server. It authenticates users via Auth file, e.g. those are "FTP only" users, not real linux users. Each of them has assigned home dir in the same auth file. They also get Chrooted into it, e.g. default dir is ~ in proftpd.conf They can connect and download files successfully, however, they cannot upload anything or create directory: 550 permission denied error.
When I login via ssh and change user to proftpd user, I can create directories in that particular place, so I guess it's not Linux permissions problem? Or is it? /var/log/daemon.log is the place where proftpd stores its logs, but I cannot find anything relevant there
I am trying to ssh into my server that I do have ssh installed on and have followed instructions carefully on ssh_config. My problem is that when I try to ssh from my desktop PC terminal into the server with ssh shack1@192.168.1.80, I get in return, shack1@192.168.1.80's password: I type in the password and I then get, Permission denied, please try again. I am putting in the correct password and am stumped......Please excuse my ignorance in this I have been using Ubuntu Desktop for 2-3 years and have been doing decent and am trying to venture out a bit.
I have tried several things to attempt to fix my sudoers file however it is still coming up with errors. The error says
[code]...
the sudoers configuration file is set to the default as I have ran a dpkg on it, have also uninstalled and reinstalled it, and went over the configuration file ensuring it looked like the defaults I had seen online.
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
I'm running an NFS Server on my Fedora machine and trying to mount it on my OpenSuse netbook.Right now I'm getting a "permission denied error" when I try to mount NFS on my netbook. (Yesterday I could mount, but could only read not write... strange)
my Servers IP is 192.168.1.45 my Netbooks IP is 192.168.1.42 /etc/export on Server
Code: /home/bob/Music 192.168.1.42(rw,no_root_squash) /etc/hosts.allow on Server Code: sshd: 192.168.1.0/255.255.255.0
I have a shared directory on another machine but I can't get it to mount. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too.
The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ****** mount error(13): Permission denied Refer to the mount.cifs( manual page (e.g. man mount.cifs) The man page does not have a list of error codes.
I want to install Ubuntu 4.10. But I get error permission denied face. I do not have CD-ROM. How can I do this?Is it possible to install via USB? [URL]
I'm having a permissions problem with Ubuntu and apache. There are two users, I'll just call them A and B. All of the files belong to A and group root. I'm logged in as B and I have admin privileges. My website is working just fine but when I create a directory in the web root, change the owner to A on the directory and all files I still get a Permission Denied error when I try to access it from the web. I've also set permissions to rxwr-xr-x on the directory and all the files. So I don't understand what's going on. Why am I still getting a permission denied error?
I want to use SSH to connect to my desktop. I have used Ubuntu 10.10's encryption to encrypt my home folder (thus encrypting my .ssh folder). This means that the OpenSSH doesn't have access to my .ssh folder. When I try to log into SSH before logging in on the local machine I get the following error:
If I log onto the machine, then use SSH it works fine. I want to use key based login, One way to get around this error would be use a different authorized_keys file, but I don't know of a way to do this. This is the contents of my sshd_config file:
Code:
# Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for
I am using Ubuntu server edition 10.04.1 running in Vmware server 2.02.I am connect via Putty so I can use copy and paste.My first goal is configuring a ftp server using PureFtpd using this guide.In section 10 I need to write this command
Im trying to move some files from my desktop to /usr/share/ProjectM Project M is a visualization program, and Im trying to move some presets I downloaded there. The error I get is
Code:
There was an error moving the file into /usr/share/projectM/presets. Error moving file: Permission denied
I am logged in as administrator, why can't I move these files?
I'm trying to create a folder using the archive manager to install Resin (web server) in the usr/local folder but I get the error message 'error creating directory: Permission denied.' Is this the easiest way to install an app--by using the Archive Manager--and if so how do I establish the correct permissions.
I'm breaking my head on this.I want to create a development environment. This means that I want to be able to create/change files myself, but php should be able to do the same. I installed a lamp-stack using tasksel. Afterwards I installed phpmyadmin. So far so good. Going to http://localhost shows "it works".
Then I created a folder /home/hwc/www and created a new apache site called hwc, disabled default and enabled hwc that points to /home/hwc/www and has the directive AllowOveride All set. But when I go to http://localhost know I get a 403 Permission denied error. I've tried several trings like changing ownership of /home/hwc/www to www-data:www-data, to hwc:www-data, to hwc:hwc, but all to no avail. Even adding www-data to group hwc and hwc to group ww-data did not help. According to other posts at least on of these solutions should have worked, but it did not. I could probably fix it by letting apache run as hwc, but that doesn't seem right.
I wanted to save a python program because I am reading byte of python and I went to save in !/usr/bin. When I try to save in this folder I get this error "[Errno 13] Permission denied: 'usr/bin/helloworld.py'.
I wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:
Code: You don't have permission to access /po/ on this server. So I go to the logfile; which says this: Code: [Sat May 08 16:43:51 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /po/ denied
I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.
I am trying to set up remote login via SSH from my Mac to an Ubuntu desktop. Here is the error i am getting:
Code: Permission denied (publickey,password). I'll give background:
- Both computers are on the same network - I'm not using the default port 22 - I have successfully logged in using password authentication, so it isn't a firewall/iptables issue i don't think. I've already worked through those issues! - I haven't set up any tcp wrappers on the server yet, so nothing is being denied - I believe the server sshd_config file is setup correctly. I can post it if needed.
Here's debugging info: bash-3.2$ ssh localuser@xxx.xxx.x.x -v OpenSSH_5.2p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to xxx.xxx.x.x [xxx.xxx.x.x] port xx. debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug1: identity file /Users/localuser/.ssh/id_rsa type 1 [Code]....
I had Fedora 8 installed in few clients and a server (same server for NFS and NIS), and NIS and NFS configured, and was working fine. Yesterday, I upgraded few client computers to Fedora 15 (server is still same), and configured NFS and NIS client. NFS is working fine, I can see home directories.
For NIS: ypwhich, ypcat passwd gives me correct uutput, ypbind is running. The problem is, I can't login to NIS client. The error is: Permission denied, please try again. My nssswitch.conf is
Is it possible to change the general permission denied error. I have some rather young users on this system that think they can "hack the gibson" and I would love to change the general error message to something a little more rude/funnyex:# cd restricted area -sh: cd: restricted area: Permission deniedI am curious if its possible to change the error message in general?ex:# cd restricted area-sh: cd: restricted area: (funny/rude message goes here)Quick info:This is a Gentoo 2008.0 system, I would also love to do this on my slacware and OpenBSD boxes as well just for kicks.
I did create an rsa certificate with ssh-keygen using my root account on a client: ssh-keygen -t rsa -b 2048 no passphrase I did copy the rsa pub_key from my client to the server scp id_rsa sampleuser@sampleserver:/home/sampleuser/.ssh/authorized_keys
I did change the ownership to the "sampleuser" of the pub key file on the server: I trayd to connect: ssh sampleuser@sapleserver
I get that: permission denied (public key)... I know I do smth wrong but I don't know what.
I have a written a java code to ftp a file from the windows box to unix box. It keeps giving me the following error : "java.io.FileNotFoundException: PORT 204,63,56,5,16,78: 550 Permission denied." I am able to ftp manually from windows to unix.
I installed wvdial on my Satellite Toshiba laptop. All works well but I have to use the <wvdial> command as root. If I try to use it as a user i get an error message Cannot open /dev/ttyACM0: Permission denied So Im just wondering; is it ok to use wvdial as root?
I have a user (let's call him John) who is not able to list contents of several 777 directories even though it appears he has permission to.
Case in point, as root:
Code:
Code:
If I use ls -a or strictly ls as john, I can list the contents of the nss directory:
Code:
That says to me that I have an issue listing permissions. Fine, I don't really need john to be able to list permissions. I want him to have rwx access to /media/nss/ENG which as you can see from my listing as root shouldn't be a problem since the perms on that dir are 777.
I am able to CD into the ENG directory or any other directory or subdirectory in /media/nss that has equivalent 777 perms, but once in the directories I can't list the contents:
Code:
I can get anywhere and do anything I want under the media/nss folder as john, except listing files. I even tried using an ACL i.e.
I am trying to give an SSH user on my server permission to compile C exploit with gcc, and I have had no luck. Every time i try to run gcc i get: "sh: /usr/bin/gcc: Permission denied. Has anyone else had this problem with this ?
fresh install of ubuntu karmic server. fresh, vanilla install of openssh-server attempt to connect either via standard ssh, linux client or puTTY win32 client system (both on local LAN)
First connect is great. connection established.
Second connection (via multiple clients) screams that: "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" and since I have strict checking, won't let me continue.
So, i do a little
Code:
To flush it out (i have backups,).
Then i try again:
I get the typical "Are you sure you want to continue connecting (yes/no)?" and i say yes. at which point, i offer the password for the username in question and it flat out refuses: "Permission denied, please try again."
Ok, so i have even gone as far as do a complete rip and replace of the ssh server and it's config files, however this continues to loop and repeat.
So, question one: Why does my key change?
Question two: Why am i getting "permission denied" errors on subsequent connect.
This is weird, today I updated my system and while trying to visudo from single user mode got
"cannot read /etc/shadow: Permission denied"
which kept me from doing anything until I switched to file permissions of 400 on shadow, then back. Is this being experienced by anyone else or just me? /etc/security/limits.conf doesn't seem like it wants to change in enforcing mode either and I can't find any alerts to provide clues on the situation.