What are the best drivers for Nvidia GeForce 8800 GTS. I'm not 100% sure, but I heard the newest drivers have buggs and aren't 100% compatible with 10.10. I was wondering what the best version of Nvidia drivers would be to install on 10.10? apt-get install?
I just installed a fresh copy of unbuntu 10.04 and downloaded the lastest drivers for my video card but when double click the file, i get a message that says "could not open file/home/desktop name/download/n...nux-86-96.43.16-pkg1.run."Anyone know why this is happening? A friend told me to try to run them in terminal so when i opened the drivers with terminal I get a message saying "error: nvida-installer must be run as root"
I attempted to install restricted drivers using jockey-gtk, was told to reboot and drivers would take effect. Rebooted and got no graphics, after some finagling I was able to delete xorg.conf and I now have horrific looking graphics. Defaulted to current version or 195 (which is also the only option I see in the jockey tool, however in synaptic/apt I see I can install other versions.
I want to install the proper drivers for my system .the drivers are here: [URL] and come in a .run format (archive format I guess?) Anyway. If someone has done this with these drivers or other nvidia drivers and has some advice. Please, I'd really rather NOT end up screwing up my system or end up accomplishing nothing at all because I did it wrong.
I am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute
The article SDB:NVIDIA the hard way results in the following error (copied from the error log):
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.
Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.
I was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...
I used the videocard Geforce 6150 nforce 430 (NV4C) without problems untill the upgrade to kernel > 2.6.32 and nvidia-drivers > 190.*. After the upgrade I can use only nv and vesa in the Gentoo x86_64 and in the Fedora 13 x86_64. When I try to install Geforce 8800 GT everything becomes good with free nvidia-drivers and with proprietary ones in both distributions. use this videocard with the kernel 2.6.33(34)* and nvidia-drivers 196.* ?
I'm having another go at ubuntu!I have Ubuntu 10.10 running (a fresh install).I went to the nvidia site and downloaded the linux drivers for it, (it's a .run file).So I try runnig it via the terminal, it goes great untill it mentions that I need to exit the X Window system?
So I tried pressing ctrl+alt+f2 (switches to a root terminal?) and tried runnig it from there but no luck either
I reboot my xwindows won't come up I have tried to to init5, I am lost sorry still trying to get up on my linux all the way. If anyone can assist me or help me uninstall completely in command line would be.
I am using a NVIDIA 9400GT video card on the latest Ubuntu. I believe the video card is a DVI-I port because it has the correct pin settings - [URL] I am using this DVI to Component adapter - [URL] The adapter is marked with Y Pb Pr above the RCA jacks. So it is analog and the vido card port is DVI-I ... all is correct ...
I am connecting to a DYNEX DX-LCD22-09 TV with HDTV component cables. The TV accepts both YCbCr and YPbPr signals. When I first boot the linux box there is no signal. Then right before it auto logs in I get a picture that is all green on the right side, black everywhere else and the TV displays it is at 1280x720 60hz. Finally the screen goes blank when the machine logs in - no signal! I have tried all combination of the adapter settings and have looked over the component input and output cables many times to insure I have it setup correctly.
I installed Nvidia xorg drivers (not knowing it didn't support my card) and messed up my video setup. When I rebooted it wanted me to restore to default, so I did. Now that I have, I can do stuff, but I am trying to run some games in W.I.N.E. and it just won't run. I can't activate desktop-effects either. And to be honest, I can't find any information on the NVIDIA GeForce 8200M, I can only find info and support for 8200 and the 8200M G. otherwise I'll just have to reinstall.... And I just installed 10.04 yesterday.
I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
Built a custom pc using a Gigabyte mobo and amd processor. Mobo has onboard video. Ubuntu Maverick installs fine using on board video but when I put in the Nvidia Geforce GT 240 I get either no video or scrambled video. I've tried disabling the on board video and still no luck. I've also tried to install nvidia drivers first, and will get it to work but video is not crisp and will not show all of the screen.
i wanna learn so much of it as much as I do in Windows System. I have downloaded the video driver but when I installed it in Terminal some error occured after i press the enter key..
You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL].. is someone know how to solve this issue?
I am trying for Redhat certification on RHEL 5.4. When i tried to install it on my Acer laptop with NVIDIA GEFORCE GO 7600, I was only able to install it in CUI mode and no GUI. From NVIDIA website I tried both the newest and oldest version they have for Linux, which is with .run extension. I tried installing it using sh <drivername.run> and it is starting the wizard, but exiting abruptly, with a kernel error.
How to work around on this issue? Any generic driver that would work for this display adaptor? whether version 5.5 would work with this card?
I recently bought a sony vaio laptop, with nVidia GeForce 310M device.
I am new, and not very good with ubuntu. I downloaded a driver version 185, and installed, after installing which, I could not get any display at all. After trying to repair, in vain, I had to reinnstall the whole system.
I really need the correct drivers. I can see a version 190.42 of nvidia drivers, but that doesnt list my device model number, and so im not sure, whether this should work. Someone, also please tell me how do I repair, if I mess while trying this driver out?
I cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.
If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.
How can I make Compiz work on this eMac? It's the original, 700 MHz, 1 GB RAM, Ubuntu 10.04. It was enough trying to get the xorg.conf file to show any video, but now I want to be able to use compiz so I can have a faster experience.
I first started having problems on 10.10 a few days ago. Just boots to a command prompt. After troubleshooting, I found when I remove xorg.conf gnome starts up. Under System>Preferences>Monitors shows my correct Monitor model and resolution.
The resolution displays properly, 1680x1050, but without Nvidia and Graphic acceleration, I can't run my Compiz effects or XBMC. I'm having the exact same issues with 11.04. I ran nvidia-xconfig as root to get an auto gen xorg.conf. No change. GeForce 6150SE nForce 430 integrated graphics card
I've seen a lot of threads on this issue and combed through most of them trying to diagnose my problem and I've gotten REALLY close but with no complete success yet.I have a nVidia GeForce GTX 465 and I'm running HDMI out to my monitor. I have video but no audio. I can see the device in the Hardware tab of Sound Preferences but for the life of me I can't get it to play any audio (aside from testing with white noise).Output from aplay -l:
Code: *** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
I installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
I purchased a new computer and I am trying to boot up gparted to partition the HD for installing my Linux Distros, but it gives the famous error Quote:
input signal out of range. So I tried booting up some other live cd's, some give the same error as above and some tell me that the resolution or refresh rate in wrong. Of course using a live cd I have no control over that. I also tried three different monitors that have run Linux just fine on other computers.
My only thought that I could come up with is the NVIDIA Geforce 7050 graphics is not compatible with Linux. Can anyone confirm this ? Or is there something else I can try ?
I am thinking of buying a Lenovo IdeaPad Z360, it has a GeForce G 310M.
I can't find much info on Linux support but an Ubuntu thread seems to suggest it isn't good. Can someone confirm that this card works with the latest nVidia drivers on Linux (Arch in particular)? It'd be even better if you had the Ideapad Z360 and could report on any other hardware problems I might have?
NVidia seems to say they have support (listed without the G however), but I've heard conflicting reports and so would like to check.
EDIT: I also found these:
Does the Z360 have optimus and the Z560 not so? I can't detect that either of them have it but occasionaly, someone says that they do. Can anyone confirm this? I thought the only real difference was the screen size.
I am trying to build a linux box from an old Dell Optiplex GX240 that I got for free. I have gone out and bought a Sparkle Nvidia GsForce 8400 GS PCI video card for it but am having trouble getting it installed properly. It seems that the card is not recognized by the computer. The command lspci shows no signs of the new video card. I have installed the lastest Nvidia driver (huge PITA) but as expected this did not change the fact that the computer cannot see the new card. The card is rated for 350W and I have a 500W power supply so I should be good there. I have also changed the BIOS settings to auto detect the video card instead of just the stock one. Is my card simply incompatible with my motherboard or are there ways to get this card to work?
just installed slackware 13.37... i did a bit of configuration by myself but im having trouble making my graphics card running correctly under X.I installed the latest drivers correctly from the nvidia website.
I have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is: