Ubuntu :: Copying File - Error Reading From File Input/output

Jun 29, 2010

I have a 7.2 GB file (VMWare virtual machine file) that I am trying to copy from its original location to the another folder OR to external hard drive...each time I try to do this, I always get the following error after the copying process reach 'exactly' 1.4 GB

Error reading from file input/output error

And I have to either Cancel or Skip

I've tried to split the files to smaller pieces but the idea didn't work as I still get the same error whenever I try to compress/ split or do any operation with this file. how I can copy this file?

View 2 Replies


ADVERTISEMENT

Ubuntu :: Error (splicing File: Input / Output) While Copying File

Jun 3, 2010

When I try to copy PDF files from one folder to another folder, it give me this error: "Error while copying "2004-SNUG-Europe-paper_...log_DPI_with_SystemC.pdf". There was an error copying the file into /media/CCDCE66BDCE64F70/Backup Master/Heterogeneous_cosimulation/Documentation" "Error splicing file: Input/output error" What is the reason of this error and how can this be fixed?

View 9 Replies View Related

Server :: NFS Large File Copies Fail - Error Writing To File: Input/output Error?

Jun 27, 2009

I recently upgraded my file/media server to Fedora 11. After doing so, I can no longer copy large files to the server. The files begin to transfer, but typically after about 1gb of the file has transferred, the transfer stalls and ultimately fails with the message:

"Error writing to file: Input/output error"

I've run out of ideas as to what could cause this problem. I have tried the following:

1. Different NFS versions: NFS3 and NFS4
2. Tried copying the files to different physical drives on the server.
3. Tried copying the files from different physical drives on the client.
4. Tried different rsize and wsize block sizes when mounting the NFS share
5. Tried copying the files via a different protocol. SSH in this case. The file transfers are always successful when I use SSH.

Regardless of what I do, the result is the same. The file transfers always fail after approximately 1gb.

Some other notes.

1. Both the client and the server are running Fedora 11 kernel 2.6.29.5-191.fc11.x86_64

I am out of ideas. Has anyone else experienced something similar?

View 13 Replies View Related

General :: Cp: Reading `filename': Input/output Error?

Feb 18, 2010

I wish to know what could be the possible cases for this error:cp: reading `filename': Input/output errorI am getting this message when I am trying to copy a big file of around 50MB.

View 2 Replies View Related

Ubuntu :: Cannot Open File: Input/output Error

Nov 11, 2010

I just received a 1TB external(Western Digital) hard drive(NTFS) for backup purposes. I'm using an Ubuntu Live CD, and an external hard drive dock. I am transferring over esata and am receiving the error:

Code:

Cannot open file: input/output error

Seems strange that it said "open". At any rate only about 60 of the 200+ GB were able to be transferred over...this won't do. I have tried to copy via CLI using

Code:

cp -r

and received the same issue. For clarification I am attempting to transfer from a mounted partition onto the mounted external.

View 2 Replies View Related

Ubuntu :: Canot Remove File Input/output Error

Apr 8, 2010

I got a new HDD like a Storage on my Ubuntu ,it is formated as ext3 and i am able to mount it ,but sometimes while downloading from FTP ,when the session broke Ubuntu crates some ./afternature.mp4 Input/output error ,which i can see on "ls -l" ,and that causes great troubles to me ,because i can not copy or write on that disk another file with the same one which is created like this ,these error are gone only if i format the hdd .

My mounting command is "mount /dev/hdb3 /tmp/hd ext3 rw 0 0" So is that possible to remove these error without formatting the disk . PS:I did a lot of search for that error ,on unix forums also here but i didn`t find a concrete answer ,i found a thread which is for that case but removing with inode is impossible because on ls -l i`m not receiving the inode .

View 5 Replies View Related

Fedora :: Cannot Remove `file': Input/output Error

Jan 21, 2011

When running rsnapshot tonight it failed with a bunch of

cannot remove `file': Input/output error

errors.

I navigated to the directory and tried to delete it manually and I got the same errors. I tried with 'sudo rm directory'. How else can I delete this directory? What would cause a situation like this?

View 9 Replies View Related

Ubuntu Multimedia :: Creating ISO File In Terminal - Input / Output Error

Feb 15, 2011

I'm trying to create an iso file in a terminal with the following command:
$cat /dev/sr0 > nameofdisk.iso
I get the following error
cat: /dev/sr0: Input/output error
I already checked and my optical drive is indeed /dev/sr0. I've hunted google a few hours trying to figure it out. Does anyone know why I'd be getting this error?

View 4 Replies View Related

Ubuntu Installation :: Copying Data Setup Tells About An Input/Output Error?

Dec 20, 2010

I want to install Xubuntu 10.10 x64, but it does not work. While copying data the setup tells me about an Input/Output error, but i don't think there are hardware errors.

The environment:

AMD Phenom II 1055t 6x2,8 Ghz
2x 2gb ram
Hitachi 1TB hard drive
Two partitions: 1st for Windows 7 Ultimate (NTFS), 2nd for my Data (NTFS)

So I decreased the size of the data partition and created two new partitions beside the Win7 partition and the data partition. The first is ext4-journal (20gb) the second is Swap (4gb). I've done that all by the Xubuntu setup.

I've downloaded the image from the german mirror (TU Chemniz) and checked the integrety via SHA1. Checksum was correct. I also checked the data after burning.

View 4 Replies View Related

Ubuntu :: Pdftk Output File With Pages Extracts Same Size As Input File?

Apr 22, 2011

I am curious if perhaps I am doing something wrong extracting pages from a pdf doc using pdftk and creating a new file. I am only extracting the odd pages from the file and outputting them to a new file that is now only 20 pages instead of the input's 40 pages, yet the new output file is still 1.4Mb in size, the same as the original.

It seems strange to extract only half the pages of a large document and end up with a result that is the same size. how to streamline the resulting pdf's using pdftk?

BTW this is the command I am using, in case perhaps I am missing an option to optimize file size or something:

Code:
pdftk A=ch15.pdf cat A1-40odd output odd.pdf

View 1 Replies View Related

General :: Data From Input File To Be Taken And Send To Output File?

Jul 24, 2010

I am new to shell scripting.What i am trying is to write a shell script which take the input file and output should like as mentioned below.Output file should have data till SOK (marked in red)from every second line and then the selected data(marked in green) from 4th line.So selected data from 2nd and 4th line in one line of O/P file and then similarly selected data from 6th and 8th line in second line of O/P file.Input File:

3c3
< c1111;11.11.11.11;pOK;SOK:abcde;Universe:aa
---

[code]...

View 14 Replies View Related

Fedora :: Input/output Error When Copying Files To Fedora Live CD?

Dec 21, 2010

I booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:

Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0

[code]....

View 6 Replies View Related

Programming :: Reading File - Output From Xrandr -q

Jul 24, 2010

Code:

I'm trying to make several files: each named after the display and containing resolutions. But for some reason I get null when trying to read lines.

View 2 Replies View Related

General :: Create A Multiple Files By Reading A Input File And Changing The Contents?

Sep 16, 2009

Being new to this area .I have been assigned a task which i am unable to do . Can any one please help me .

I have requirement where i have input file XYZ_111_999_YYYYMMDD_1.TXT and with header and series of Numbers and Footer.

I want to create a mutiple output files with each file having a seperate code which is stored in text file and create XYZ_222_999_YYYYMMDD_1.TXT . and add date in the contents next to series of numbers .Like this

Before change the file looks like this

file name XYZ_111_999_YYYYMMDD_1.TXT

001,19SEP2009-14:05:05,000000003
1234
4567
6785
END_OF_DATA

[Code]....

View 4 Replies View Related

Ubuntu :: Getting Input/output Errors While Copying/moving Some Files?

Jul 31, 2010

whenever I copy (or move) files from one place on my hd to another One or two of them dont copy, and I get an error similar to " There was an error copying the file into [location]. Show more details> Error splicing file: Input/output error. The file is always an .avi file and always between 600MB and 1.4GB in size, how can I fix this problem?

View 9 Replies View Related

Ubuntu Multimedia :: Make Pulseaudio STOP Copying Mic Input To Main Output?

Nov 26, 2010

I have a headset microphone plugged into the built-in audio input. The output is plugged into an amplifier > speakers.

Pulseaudio is "helpfully" routing the microphone input signal to the speaker output. I do not want this. I go to pavucontrol and disable the "monitor of the internal audio analog stereo" -- and what I say into the microphone is still coming out of the speakers.

Google gives a lot of information about how to live-stream mic input over the Internet. And, I found this here (that's for karmic, I'm running lucid):

[URL]

... but that's about how to ENABLE loopback. It says loopback should not be enabled by default, but I very clearly hear that something is doing the same thing as loopback.

(Of course, I need to hear sound from applications that are playing, and when I'm dictating text into NaturallySpeaking running under virtual box, I need sound input to go there -- so turning the mic all the way down to zero is not the solution.)

I'm fairly sure I remember hearing this behavior ever since installing Ubuntu, and I didn't do anything to turn it on. I can't imagine most users would prefer this behavior -- if it's the default behavior, why? It makes absolutely no sense to me. (Sorry. It's one of those piddly little configuration things that costs a couple of hours of web searching time, and after a while I just have to give up, but not before becoming much more frustrated than I should have to.)

So, to be clear, here's what I want:

- Applications playing audio should send sound to the main output.

- Applications receiving audio input should hear the microphone.

- Microphone sound should not EVER go to the main output unless I have explicitly launched an application making the connection. (The signal goes input -> output even when NO application is open - hence my consternation.)

View 1 Replies View Related

Ubuntu :: Error "File Too Large" Copying 7.3gb File To USB Stick

Nov 24, 2010

I am trying to copy a 7.3gb .iso file to an 8gb USB stick and I get the following error when it hits 4.0gb

Error while copying "xxxxxx.iso". There was an error copying the file into /media/6262-FDBB. Error splicing file: File too large The file is to be used by a windows user, and I'm just trying to do a simple copy, not a burn to USB or anything fancy. Using 10.4.1.LTS, AMD Dual Core, all latest patches.

View 2 Replies View Related

Ubuntu Installation :: Error Occurs. "(Reading Database . . . 55%dpkg: Unrecoverable Fatal Error , Aborting: Files List File For Package?

Feb 11, 2010

i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.

View 9 Replies View Related

Ubuntu :: Error Copying File To External Drive?

Aug 2, 2010

i have this .mkv file of a movie which is of size 7.9GB and when i try to copy it to my external drive after some time it shows a error saying "Error splicing file: file too long" so how to copy help

my external HD's file format is vfat. and i am using ubuntu 10.04

View 4 Replies View Related

Fedora :: There Was An Error Copying File Into Smb://path/folder?

Jun 10, 2010

I'm using fedora 13 to connect to my server's share folder(windows server 2003) and i found that i can create folder,create file, access and open or delete the file in the window share folder, but i can't save or replace the file in the share folder. the error message is like below...there are error copying file into smb://path/folderShow more detail:
Invalid argumenti also have attach the pictureby the way....i had disable the firewall and selinux already....but still can't save the file into the window share folder.previously i use fedora 11 and all is ok with no problem, but the fedora13 got this problem, please tell me what cause this happen?

View 2 Replies View Related

General :: Error Opening Matrix File (null) For Reading"

Dec 22, 2010

I have installed CUDA-BLASTP on C2050.It is giving me an Error:"Bad address Error opening matrix file (null) for reading" while i am running with following query file and dataset:

./CUDA-BLASTP -i ./data/raimondii_contigs.fasta -d ./data/DB_sorted.fasta

and i am using BLOSUM62 as a matrix file which is already present in package.

And getting the error:"Error happened when the number of GPUs is 0" while i am running CUDABLASTP with a part of dataset taking as a query file and dataset is same. above mentioned error is comming from file "CUDA_Blast.cu" included in package.

else
{
printf("Error happened when the number of GPUs is %d
", localGPU_N);
exit(0);
}

View 2 Replies View Related

Programming :: Ar - .libs/libbfd.a - Error Reading Archive.o - File Truncated

May 30, 2010

So the above is the error message I am receiving when trying to compile (at make stage when error received) binutils 2.20.1. I am compiling in Virtualbox and the base machine is SourceMage 64bit.

View 4 Replies View Related

General :: Why Is Reading A FILE Faster Than Reading A VARIABLE?

May 4, 2011

I don't understand the results of a simple performance test I ran using two basic scripts (running on a high end server):

perfVar.zsh :

#!/bin/zsh -f
MYVAR=`cat $1`
for i in {1..10}

[code]...

Performance test result:

> time ./perfVar.zsh BigTextFile > /dev/null
./perfVar.zsh FE > /dev/null 6.86s user 0.32s system 100% cpu 7.177 total
> time ./perfCat.zsh BigTextFile > /dev/null
./perfCat.zsh FE > /dev/null 0.01s user 0.10s system 91% cpu 0.118 total

I would have thought that accessing a VARIABLE was way faster than reading a FILE on the file system... Why this result ?Is there a way to optimize the perfCat.zsh script by reducing the number of accesses to the file system ?

View 3 Replies View Related

General :: Xkbprint Error: No Input File Specified

Mar 18, 2011

when I try to print the current keyboard layout with "xkbprint -o layout.ps" it gives me the error mentioned in the subject. I also remember printing it a couple of weeks ago (and I'm sure I didn't specify any additional options), but now it just doesn't work. Everything I read on the Net assume this command prints the current layout, and so far I haven't discovered even the slightest mention of this error. It's a trifle, but it drives me mad. What could I be doing wrong?

View 1 Replies View Related

Debian Configuration :: Error Starting Domain: Internal Error Process Exited While Reading Console Log Output

Sep 9, 2010

I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied

The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?

View 1 Replies View Related

Server :: Scp Truncate Text File Busy - Copying File Is Not A Running Binary?

Jun 14, 2010

I am having problems with scp during a backup operationI added a ps -ef before and after the scp operation used during the backup.The backup is a script to backup a Zimbra ServerI am including the code segment that I am having problems

Code:
# DRCP Section. To scp newly created archives to a remote system
if [ "$DRCP" = "yes" ]

[code]...

View 3 Replies View Related

Programming :: Find Command With Standard Error Output And Mail Error File

Nov 11, 2010

We make everyday a DB Mysql backup on Linux redhat Enterprise. We are using a bash shell script (and putting it in the crontab) to execute it automatically everyday. We added a line to this script telling, once the backup has completed, to find old backup files (stored on hard disk after each backup) older than x days to remove them. We use the find command (search for file type) with the mtime option and in combination with rm command. Everything runs ok but we also want to add some new code to the same line: If find command cannot find anything or fails, for example if it cannot delete file or fails, send the error message (standard error output) to an error file (like error000001 and increasing) and mail the errorxxxx file to an email address for example to admin@companyname.com. What would be the code for this issue to add it to our find command in the same bash shell script??

View 2 Replies View Related

Ubuntu :: Gopenvpn Compile Error - Cannot Find Input File: `po/Makefile.in.in'

Mar 6, 2010

Ubuntu 9.10 64-bit
Lenovo T400

I'm trying to install gopenvpn from source. [URL] I'm pretty sure I have all the necessary libraries installed.

./configure ends with:
.
.
.
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pixmaps/Makefile
config.status: creating src/Makefile
config.status: error: cannot find input file: `po/Makefile.in.in'

View 4 Replies View Related

General :: Overwrite The Header Of A File Without Copying The Whole File?

Mar 1, 2011

Asuming I have two files, one large file and one small file, I want to write the smaller file to the large file without overwriting the remaining part of the larger file.

Both are binary files, and the large file can become very large, so I want to avoid copying the whole file, as that will take some time. Is there any standard Linux console utility to do this, or do I need to write it myself?

View 2 Replies View Related

Ubuntu :: Save The Output In A File (or Log) To Check If Error?

Mar 10, 2011

I have a bash script that i created for a colleague to configure the servers he installs. It does package installations, modifies some config files, creates directories.

The problem is sometimes he says that the script skips some steps. There are some steps that require user input and i think he chooses wrong option. (i have tested the script and it works fine).

My question is how can i save the output in a file (or log) so i can check if there are error? I know about the ">>" operators but will this "script.sh >> output.txt" still bring the dialogs for user input (like read input from shell and mysql password dialog from install package)? And how can i record everything he inputs?

I read about logger, but since there are a lot of commands do i have to log every command or can i just log the whole script.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved