Ubuntu :: After Running Gconf-editor - Find Gnome-apparence-properties?
Jan 25, 2011
where i can found gnome-appearance-properties because i would like to use effects on normal manualy each time i running my computer ? with bash i found this command : " gnome-appearance-properties -p effects " but after i blocked for add something after effects...i try on,enabled,normal etc nothing work certainly a tips
Tried to create a data DVD the first time and another surprise. Very slow to write. On a dual boot system, it takes Windows 7 ten times less to do it. When i tried to folllow the ideeas from forums, i couldn't find Brasero in /apps/ with gconftool or gconf-editor. With Nautilus i get the same low speed.
I'm trying to go through the ProLinga tutorial and it's calling for gnome-database-properties and my research says that it is in the libgnomedb packages. However, I can't find anyplace that has this package. Has it been removed from Fedora 13?
I would like to run 'gconf-editor' in UNR 10.10.However, I cannot open the 'Run' dialogue box, and so I am unable to do it in the usual way.Is there another way of running gconf-editor?
I opened Alt-F2 > gconf-editor > metacity and used command_1 in keybinding_commands. The type was string and the value xterm. I then moved to global_keybindings and used run_command_1. The value was now <Control><Alt><Shift>p. Nothing happens when I press the key combination. I've tried other key combinations also. And I've tried to run root as root and as user. rebooted. Nothing happens. If I change an existing key combination it takes it immediately an xterm pops up.
I'm having trouble removing entries in gconf-editor (GUI).
I have searched everywhere: manpages, internets, forums, can't find anything related.
Here's the situation: I installed Avant Window Navigator and it naturally created entries in gconf-editor for interface, applets etc. The thing is that when I uninstalled it the entries are still there, and yes I have deleted the corresponding folders in home/.gconf/apps. Also did a search of my filesystem for awn, avant widow navigator, avant-window-navigator etc and nothing came up. Looked in /etc, nothing. Looked in /etc/gconf, also nothing.
I was trying to make Gnome display the date in a better format. I tried using gconf-editor as described in the thread at [URL], but I also found that apps > panel> default_setup > applets > clock had no prefs item.
Unfortunately, the solution which worked for quixote (stop running as root) didn't help me as I was running as the only account I've set up on the system, and all of the files in ~/.gconf are owned by that user.
Does anyone know what else could cause options to vanish like that? I'm running Gnome 2.32.0.
For some reason my gconf-editor does not have a ftp entry. (/desktop/gnome/url-handlers/ftp)This is annoying as it sets all unknown urls to firefox. I always liked Nautilus as the default.
I tried creating a %gconf.xml file to $HOME/.gconf/desktop/gnome/url-handlers/ftp/ and still no luck.
I use Debian Lenny and iceweasel as my browser on a gnome core desktop. I also use JFOREX (java application) for my trading platform. It works fine. The problem is when I click on portfolio statement in creates an error which states: "Error in launching web browser". I googled the error on the web and read some sites and it says that I should install gconf-editor and modify the URL handlers in order to point to iceweasel.
The problem is I am practically a noob when it comes to gnome and sadly I am not technical enough to understand the values that needs to be changed using gconf-editor.
I have been installing and uninstalling stuff about mouse properties and xorg.conf mouse section... and now I have several "extra" keys in gconf, exactly these:
I can use the gconf-editor to disable the screen-saver lock and set it to activate when its idle. But no matter what I change /apps/gnome-screensaver/idle_delay to, the ScreenSaver UI is never updated and stays at the default 5 minutes. There seems to be no link between the slider bar in the ScreenSaver Preferences and the value that lies at /apps/gnome-screensaver/idle_delay...
The reason why I'm doing it through gconf-editor is so a start-up script I have created can use gconftool-2 to alter settings for certain users on login.
Is this broken in Ubunto 10.04 or am I looking in the wrong place.
Anyone have an alternative to gconf-editor for changing the idle dim time? I have a Vaio, which hasn't exactly been compatible with ubuntu but I've been making it work.What I'm looking for is an alternative, like the the one I'm using to control the back light (nvclock).
I recently installed this awesome distribution - Fedora 15 x64 because of the Gnome 3. I love it. But i have problem with adding music library folders to rhythmbox. I' ve been using gconf-editor for that on all debian based distributons i worked until this. I installed gconf-editor 3.0.0-2 but cannot find the entry for rhythmbox player. Can you tell me how to fix this ?
Is there any risk to deleting program entries from gconf-editor? It's very busy with software I'veuninstalled, which makes it fractionally harder to find entries when I want to edit them.
I used gconf-editor to change the close button to right side of the window. Now all of my programs have close button on right side except Firefox. Firefox have still close button, minimize and maximize button on left side instead of right side
What are all the options available for the button layout? I know the following already:menu = brings up the window menu minimize = minimizes the window to the taskbar maximize = makes the window full screen or windowed close = closes the window spacer = puts space between entries Is there an option to raise or lower a window? Is there an option to keep a windows on top? Is there an option to have a window keep to the current active desktop?
I'm trying to change the icon on my custom main menu on Ubuntu 10.10 doing this> sudo gconf-editor apps/panel/default_setup/objects/menu_bar.I gave object_type menu-object and custom_icon path as /home/ john/Pictures/menu.png then I checked use_custom_icon but with no luck (notice that I've succeed doing this in a virtual machine with the exact settings)Also I want to have icons on places and system, so I did thisdesktop/gnome/interface and clicked menus_have_icons.what I'm missing?
Whenever I try to change maximus' exclusion list in gconf-editor, I get the "key not writable" error, as in this thread, but I do not have an entry for maximus in my ~/.gconf/apps folder. I've already tried reinstalling to no avail.
I get this : Code: [root@Fedora philip]# gedit (gedit:3132): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.) I now tested it being not root and it's ok:
Code: [philip@Fedora ~]$ gedit [philip@Fedora ~]$
No error when I'm not root. So it's only when I become root and run gedit in terminal I get errors, why?
I have a bunch of gconf settings that I change by default when I install Ubuntu on someone's machine and thus I've created a script to make it easier after a fresh installation. Here is a list of changes I make so far:
[Code]....
However, I'm looking to remove the top panel and have only the bottom panel like I have set up on my machine. The gconf settings seem to be pretty complex and I'm not sure which keys I should be changing to remove the top panel and include the settings I have currently for the bottom panel (e.g. Menu Bar | Shortcuts | Window List | Notification Area | Clock)
I dont know why but I cant open the appearance properties anymore.The error was 'BadAlloc (insufficient resources for operation)'.(Details: serial 693 error_code 11 request_code 53 minor_code 0)(Note to programmers: normally, X errors are reported asynchronously;that is, you will receive the error a while after causing it.To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)
I just installed Ubuntu 10.10 to try out right? Well, I tried to expand the height of the bottom task bar to 35, and when I did, it had an graphical issue happen. Its almost as though the image isnt large enough so it starting repeating it to fill in the height. I think I can do screenshots so I can show below. Is there anyway to fix that?
The other question I have is, why is GNOME and KDE both using such larger buttons and drawing then Windows or even MacOS? Can they be made smaller? I can include screenshots for those if I need to.
I installed avant-window-navigator and followed these instructions to remove gnome-panel from startup: URL...However I have since uninstalled AWN and now cannot get gnome-panel to load at startup.I think I have put my settings back where they should be -- looking at them in gconf-editor:
1. desktop > gnome > session, the required_components_list is [windowmanager,filemanager,panel]
2. desktop > gnome > session > required_components_list, the panel value is "gnome-panel"
Yet gnome-panel does not load at startup. Any ideas why?Clarification: I can get gnome-panel to load by listing it under Startup Applications, but I am curious why it won't load via the gconf settings.
I have a problem with my proxy variables. I use gnome-network-properties gui to set up two locations. One at home with no proxy and one at work. Somehow, apt-get works fine, but wget does not. I checked the env variables with the following command
No where are how enable get back minimize resize close buttons windows top tab Fedora 15 Gnome3 gconf2
There is a question about this in this thread but the thread title did not have any of the above words in it and since most "new" folks don't think to use the "posts" option, I thought I'd make a new titled post.
This seems to be a big irritant of a lot of people around the net with Gnome 3 so I'm going to confirm what other people have said about how to fix the situation.
In "add software" enter this search term:
gconf
You will see quite a few returns, you should click the following:
A process-transparent configuration system (G Conf1-2.3 yada yada)
Graphical Gconf untilities (it may be pulled with the above however).
Install it/them.
One can then type "Gconf2" in terminal and it will open but then close when the terminal is closed, or one can go to activities/applications/tweak advanced settings( the symbol will be the same as for settings in Gnome 3).
In the "Shell" button one will see "Arrangement of buttons on the title bar". Surprisingly, "All" will already be apparent. One need merely verify that it is on "all".
Close gconf.
Nothing will have happened in terms of new buttons even if one closes and opens, say FireFox.
Then reboot.
After the reboot, all three buttons will be present.
There are not a LOT of configuration items in gconf2 but this one seems to be of paramount importance to a lot of people.
One can also do it from command line, and if someone wants to post that please feel free it won't hurt my feelings.
This might seem like an odd problem, but I can't find gstreamer-properties on my system. Also I can't find a package that provides it. I have tried the following gstreamer gstreamer-tools gnome-media control-center control-center-extras control-center-filesystem
None of those seem to provide the file. can someone who has gstreamer-properties do a Code: rpm -f gstreamer-properties and let me know what rpm provides that file ?