I have been using ubuntu 10.10 (running on a Dell Inspiron N4010) for a couple months and love it but the wireless just recently stopped working and I can't figure out how to re-enable it. I've searched endlessly the FAQ's, forums, etc but nothing seems to work.
I have recently installed 10.4 (wubi installation), and am having strange problems with my networking.
It was working fine, wireless enabled, connecting to my network fine. Then for what seems like no reason, it decided to disable the wirless on boot, and I cannot re-enable it, the option to enable it (by right clicking the nm applet) is greyed out.
I have had this problem twice now, the first time it happened, my ubuntu installation was really new, so I just reinstalled, no harm done. The second time I did something that seemed to fix it (for a while at least), but now that is not working.
We're on vacation here with free wifi and I brought two laptops. The older of the two laptops running Ubuntu 10.04 and a Broadcom wireless chip suddenly wouldn't work this morning. I checked and it says wireless disabled, however wireless is grayed out when I right click on network manager. I have -no- idea what to do. I've never seen wireless just die like that. I popped open the cover but the wireless card is fine. I re-seated it, booted back up, still no sign of it.
Last night I already succeeded upgrading to 10.10 (Maverick meerkat), on previous version I never face wireless issue after installed additional package (sudo apt-get install b43-fwcutter). But after upgrading I saw the wireless is disabled and the hardware indicator light off. I used Lenovo notebook.
I was cleaning my laptop and hit the wireless shortcut key on my Dell inspiron and disabled the wirless card. The key will not turn it back on either (I maybe messed with the short cut but dont remember). In the network manager it says "wireless hardware disabled". I am running 11.04 beta with gnome 3 shell. Here is from terminal
I've had a host of problems since upgrading to 11.04 Natty Narwhal, so let's deal with these 1 at a time.
I've got a Hewlett-Packard Pavilion G60 laptop. Next to the power button is a handy wireless on/off button. This has always worked well with previous editions (9.04,through 10.10). first press toggles the wireless off, second press toggles it on.
Not so in 11.04. The toggle off works great, first time. But, it will not toggle back on. Not after any number of tries, not after restarting, not after booting into other OS's (9.10 and Vista) re-enabling it there and then booting back into Narwhal. to further complicate the issue, this feature bypass the network manager, so toggling the wireless off by the switch leaves me showing no wireless adapter in the network manager. I also restarted, switched from Unity to a Gnome session, but the issue still persists.
As my only network options are wireless, this has become a substantial inconvenience. ---- EDIT: so the network util is actually saying "wireless disabled by hardware switch". Also noticed it I enable it in 9.10, reboot to 11.04 (where I inevitably fail to re-enable it), then reboot into 9.10, it will initially be disabled. The key difference is in 9.10 I have the ability to enable wifi using the hardware button. It seems that 11.04 is remembering that wireless is disabled between boots. Is there a place it might be storing this value? If so, I may be able simply to set the value as enabled, since toggling that silly button isn't working. ----- EDIT 2: found this thread:"Wireless disabled by hardware switch" bug? - Natty seems to be a similar issue. I'll be following how that one develops, too.
So I have been trying to connect my Wiimote up to my PC using the following HOWTO: [URL]... I had it working last week and for some reason it has now stopped working. I am using a USB Bluetooth dongle and I am sure that it is still working because I can connect the Wiimote up to my laptop no problem. What I have noticed is that on my Laptop the bluetooth icon is highlighted and on my PC although the Icon is there it is greyed out. When I go to preferences and click on turn on Bluetooth the button greys out for a while and then comes back saying "Turn Bluetooth on" again.
I installed the server version 10.04. The only problem with the install was setting up the network. I believe it was due to the fact that my nic was not setup correctly. The installation reconciled the nic, but upon the reboot after the install, I had no network capabilities. I tried to ping the router, no luck. ifconfig only showed lo. Also, the GUI (command F7) freezes and does not responds. The last thing shown is configuring web server. I tried to ndsiwrapp the drivers to the nic, but found out that ndsiwrapper is for wifi connections.
I've recently installed a second monitor and it's great having all that extra space.
However, Ubuntu 'loses' the new monitor after a restart and I have to go into System>Preferences>Display and get the second monitor re-enabled and put to the left of my existing monitor. Quick flicker and the second monitor is on.
I don't really want to have to do this every day so am I missing something so my second monitor is remembered?
I am using openSUSE since last 4 years ,which is installed on my External Transcend 320 Gig External Hard-disk. Now I don't know why but my network is not working, i.e. when I click on "Network Manager", it reads, "Network Manager disabled". So is there any way to overcome from this problem? I also tried to restart the network service but, it did not worked.
I'm running 11.04 with Unity and enabled Desktop Cube in Compiz Settings Manager. I ended up disabling services, i think "largedesktop" and enabling others like OpenGL and composite. Anyway, unity no longer works including the bar above and the icons to the left. Any idea how I can fix this?
opensuse v11.2, linux 126.96.36.199-0.1-desktop x86_64 ati radeon hd3200 (built into motherboard) gnome desktop
The video acceleration is clearly not enabled since I can practically watch each pixel drawn. (Well, a bit hyperbolic, but really slow.) Another system, same hardware, had this slow video problem and at one point required a complete OS re-installation. The slow video refresh went away. So there is some way to configure the graphics+display to enable acceleration at install time.
Just upgraded to the newest version of Ubuntu(unity), and my wireless isn't working. I have the 14e4:4315 Wireless Card so I followed this posts [URL].... And still have no wifi, when I click the icon in the menu bar it says under "Wireless Networks": "wireless is disabled by hardware switch", which ins't true because on my Vostro 1520, there is only one switch and it is in the on position. I've tried 3 versions of ubuntu and none of them work with wifi getting tired of it.
I cannot seem to enable my wireless connection in 9.10. I know that the connection WAS WORKING maybe a month or so ago. However, 99% of the time I am wired.I am using a BCM4312 It shows up in lspci The drivers are loaded (wl, lib80211 and lib80211_crypt_tkip) If I look at System->Administration->Hardware Drivers the Broadcom STA driver is active. dmesg says that the interface is eth1 but then moves it to eth2 If I click on the network icon in the panel I have options for connecting to eth0 (wired lan which works fine) but under "Wireless Networks" it says "Wireless is disabled" in gray.
I after updating or something I wasn't able to connect to the internet(neither wireless, nor wired) anymore. I managed somehow with google-ing to fix the problem with the wired internet, but my wireless is still disabled.
Here is what I got:
I have the Broadcom STA wireless driver installed.(System - Administration - Hardware Drivers)
I don't usually have any issues with installing ubuntu but I figured I would ask around here before I try anything major. I just installed the latest version of ubuntu on a compaq presario cq60. I have no issues connecting to the internet via ethernet but for some reason the wireless says its disabled in the top corner. Now there is a button that has the wireless off/on capablilty but whats strange is in Windows it would always boot to be off and I would have to press it to activate it. It boots orange but when ubuntu boots it goes blue(on, but clearly it isn't.
the wlan card is boadcom 802.11b/g WLAN its on HP 6000 laptop it connect im a total newb to so that dosnt help me very much i see a lot of kernel stuff wich i have no idea what that means but it connects on XP but not on ubuntu i just installed it as a dual OS on XP and im lost i have treid a few things that others have posted on other sites but with no success HELP i am running a Linksys wireless G router the WRT54G model and everything i have tried has not ever enabled the wireless for ubuntu so far anybody got answers please help a newb i can get what ever you ask me to type i bet but i have no Exereince on linux /ubuntu
I have a Thinkpad x61 with intel wireless chipset. At startup, wireless is always disabled, and bluetooth is always enabled. Function+F5 has no effect. Can you tell me how to enable automatic wireless connection at startup?
My wireless was working fine for about a year using 9.10 until I installed an update about May 28 2010. After that my HP laptop did not recognize any wireless routers including my Netgear. In early June I upgraded to 10.04. My HP laptop has: product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. Dose the following apply when looking for the source of my disabled wireless found at: [URL]
Setting wireless regulatory domain via module option no longer supported. Ubuntu 10.04 LTS enables the CRDA wireless regulatory framework for controlling which wireless channels are usable and visible in a particular location. If you previously had to use the module option similar to that below in /etc/modprobe.d/options.conf to allow access to certain channels in your locality then you may find that wireless will not function at all: options cfg80211 ieee80211_regdom=EU You should remove this kernel module option on upgrade from releases earlier than Ubuntu 9.04 and use the iw*reg command instead. (This change was made in Ubuntu 9.04.) Here are the results for the Code sudo lshw -C network
I realize this seems like a repeat question (and it probably is). I have been searching for a solution to my issue on the forums/web for a few hours to no avail. I have a Compaq f700 with Vista. I am sick of Vista. I installed Ubuntu today. Looking forward to using it more. However I am having problems with the internet.
My wireless internet is on the on setting, however, the light will not switch from orange to green (if I load Vista instead, the light changes). Broadcom BCM4311 802.11b/g WLAN [14e4:4311], It says my wireless is disabled. I can not figure out how to enable it.
I logged into my notebook today and found that my wireless was disabled and I couldn't enable it again, also found that my bluetooth icon was gone, when I tried looking at the setting for it it told me that it coulnd't find the bluetooth hardware. Don't know what's up with this everything was working fine yesterday, I logged today and I can't use wireless and bluetoth.
I'm running Ubuntu 11.04 latest updates on a HP G50 laptop. It was working fine but would never auto connect to wireless. I would have to select the wireless from the top menu and connect to a network. However I disabled it once and tried to re-enable but ran into a problem. The Enable Wireless was grey and would not allow me to enable.
Have searched google and tried lots of solutions and none worked. I even reinstalled and still have the problem.
Okay, so I just installed ubuntu alongside Windows 7, and it's saying wireless is disabled. I clicked "enable wireless," and the box has a check mark now, but it's still saying that wireless is disabled. I restarted my computer just to see if that'd do it, but it's still not working.