I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
I have got 2 hard drives running one one of my computers which i am running as an server. I was using Ubnntu Server which is good but i have decided to change the way that i am going to use the server and have installed Xubuntu over ubuntu server. However in the installation the hard drives shwn when it asked where i would like to install the operateing system. It installed sucessfully and is working but it cant mount my other hard drive which has all of my data on it.
I had tried mounting it throught the command prompt and had no success. After which i have checked if the the toher hard drive is being reconised by Xubuntu and it is as sdb1 but i caqnt mount it and get to my data. I hoped that i can try and put in my ubuntu live cd and see if it can pick the seoncd hard drive up and mount it which it has not been able to.
I have 2 20 gigabyte hard drives atm the moment and i am not adding the others until i can get to all my stuff again form the other hdd.
I want to pull a few things off this external hard drive I have that is an ubuntu install from last year. However, my mac won't recognize the file system and mount it so I can pull the few files I need off of it.
What's the trick to getting a mac to find an ubuntu hard drive?
My other option is removing my laptop hard drive, installing the ubuntu one, opening ubuntu manually, burning the information I need to a CD, or a usb key, and then removing the ubuntu hard drive, and reinstalling my mac osx drive to the laptop bay.
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
I've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
I run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run Code: sudo fdisk -l and this is what I get
Installed ubuntu 10.4 on a formatted hard drive IDE. desktop has two other drives , one SATA drive and one SCSI drive. SCSI drive has windows.
Both windows and ubuntu load fine through GRUB2 etc
I had installed WUBI before on the SATA drive and then i uninstalled it.
problem is that when i log in to Ubuntu i see on fdisk
But i cannot access the SATA drive /dev/sda i tried mounting the drive but i get an error saying this is mounted as /dev/sdb5
How do i mount the SATA drive to get access to the drive ? i messed around with this drive when i was using WUBI. i.e. tried to mount it to recover grub but never got it working. Now somehow it seems that this old mounted drive is messing with my current Ubuntu install.
How to recover my fstab is shown below:
Changed the connect sequence in BIOS and mounted the volume using sudo mount /dev/sdb1 /media/sdb1
i just had a init input output error, (and ubuntu wound not boot) so i decided to boot from my live USB to see my fstab file. It booted about 5 times then started to return an input/output ewrror (cant mount)
Hard drive checks ok as per the bios. Ubuntu will not boot and cant try any other OS (no CD drive) (I have tried 3 diffrent live USBs) what next?
I recently wiped and re-installed Ubuntu on my system Lenovo Thinkpak T510, now running 11.04. Before formatting my hard drive, I backed up all my information to an external USB Seagate FreeAgent Drive, which I reformatted to ext4 before copying my data there using a rsync command. After reinalling the operating system, I'm no longer able to get the drive to mount. I'm not quite sure what's going on. Here are the results of a fdisk command:
Code: $ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I'm not able to mount the drive from my mac either. Did I do something wrong when backing up my data and loose everything (fortunately, most of it is also backed up elsewhere, just not all in a single place), or is there something else I can try to get it back?
I'm new to Fedora. Is there an instruction manual. I'm using Fedora 14. I found under documentation a manual for musicians and amateur radio enthusiasts, but not for regular users. I'm using a black widow, which is a holder for hard drives that connects thru USB. I'm trying to mount it. The file system is Ext4.
My old centos 5.5 server stopped working so I setup a new one and I can't mount it to get the data off (if you're curious, I do have a NAS, but because of renovations it was accidentally shut-off July 2...)here's the fdisk -l:
So when I booted my system up today my second internal hard drive which is formatted to ext4 failed to auto-mount for me(I have an fstab entry for it). When I I tried to manually mount it from terminal it failed and suggested I run dmesg | tail and here is the output from said command:
I've recently started using a 500gb external hard drive for music and backups. It is always plugged into the computer but doesn't always mount at boot-up and I have to dis-connect and re-connect the USB cable. The desktop icon then appears.The fact that it's mount point changes also means I can't share the Music folder on the external hard drive via Samba (WinXP machines say they can't access the folder) and also Songbird 'loses' the tracks.
How do I permanently mount the external hard drive? I assume it will mean some editing of the fstab file? Unfortunately, I've got no idea of what I should enter on there.The external hard drive volume is called 'Music and BackUps' - Gparted screengrab attached.
I have an eSata external hard drive connected to my desktop running Ubuntu 10.04 LTS. I searched around for some info on how to mount an eSata external hard drive and was not successful. Most of the posts were talking about stuff after the drive has been mounted.
The other day a power outage affected an SSH server I have running 9.04 (32-bit desktop ed.). I have two external USB hard drives used for cron-scheduled backups (one for rsync, one for an incremental) that are connected at all times. When I reboot, they no longer mount automatically until I login to the gnome desktop. As far as I can remember, they always mounted automatically before as disk-1 and disk-2, but now I have to login to the gnome desktop and then log back out.
I never had them listed in the fstab before since they just worked, & hope to avoid doing it this way since the drives sometimes get their paths (sdd and sde) interchanged. However, is the best way to fix this to use UUIDs in fstab vs. using sde or sdd? (such as in this post: 4highlight=external+hard+drives+don't+mount+boot Or maybeust remembering incorrectly & ubuntu doesn't mount them automatically until login? Sometimes I have to reboot remotely, & this problem would cause the rsync to fill up my system drive.
I have some documents that I need to copy from my old disk that has Fedora 9 on it. I bought external usb case for 2'5" disk but when I connect it through usb cable I can only hear it running but there's not much of the auto-detection.