Ubuntu :: WUSB300N < Wireless Card Driver Not Activated

Feb 27, 2011

i followed a tutorial and i used NDISWRAPPER to install the windows drivers and my device WUSB300N (wireless network card) worked perfectly. Once i rebooted however, the drivers are still installed but not activated if you get me? so the wireless card is just not read by the operating system.

View 1 Replies


ADVERTISEMENT

CentOS 5 Hardware :: Finding And Installing A Driver For The Linksys WUSB300N Wireless Adapter?

Mar 23, 2010

finding and installing a driver for the Linksys WUSB300N wireless adapter.

View 1 Replies View Related

Ubuntu Networking :: Wireless Driver Activated But Not In Use?

Sep 6, 2010

as the majority of ubuntu 10.04 users I had problems with setting up wireless internet connection too. After reading many forum topics I somehow managed to set up the connection.Now the only problem is that when I restart computer wireless connection is no longer working. Each time I boot Ubuntu I have to go to System>Administration>Hardware Drivers, remove Broadcom STA wireless driver and then install it again. Otherwise the wireless connection is not working and under Broadcom STA wireless driver this message is written:

View 2 Replies View Related

Networking :: Wireless Driver Not Showing Up To Be Activated In Ubuntu 10.10?

Apr 29, 2011

Here is the output of lspci -v on a dell xps laptop I got today:

Network controller: Intel Corporation Device 008a (rev 34)
Subsystem: Intel Corporation Device 5325
Flags: fast devsel, IRQ 17
Memory at f3b00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: iwlagn

View 3 Replies View Related

Ubuntu Networking :: Wireless Driver Activated But I Still Can't Connect / Make It Possible?

Mar 24, 2010

It says "device not ready" ive read a lot of posts with problems that seem the same but i dont know which fix actually applies to me. im running karmic on an ppc with the b43-fwcutter driver.

View 3 Replies View Related

General :: Wireless Driver Says It's Activated / But Doesn't Work

Jun 22, 2011

I've been with Ubuntu since about 10.10 and a little before, but did a trial. I just installed 11.04 tonight, and my wireless driver is having an issue. I installed it, and reset my computer to complete the installation, but it still doesn't pick up anything wireless, just Ethernet.

View 4 Replies View Related

Ubuntu Networking :: Wireless Driver Became De-activated After Plugging In Ethernet Cable For File Sharing

Dec 10, 2010

Using ubuntu 10.10 (pinguy OS) i connected an ethernet cable from my girl's macbook pro to her lenovo ideapad s10-3t to transfer some DS9 episodes onto it. new enough to linux to have not been able to figure out how to access the files on the mac, so i disconnected the ethernet, and the wireless hasn't worked since. tried everything i know, and googling for a while (as well as searching again on this forum) to no avail.

Just before linking the 2 computers via ethernet, the wireless worked fine on the ideapad, always had; but not so after the ethernet connection that did nothing other than apparently kill the wireless. an "lshw -C network" command tells me i have a BCM4313 wireless card, and *-network UNCLAIMED. also, if i launch "install additional drivers", i see that the proprietary driver is not active.

How could merely plugging in an ethernet cable that happened to be conncected to a MBP running OSX.6 do that? and will that happen again? i thought linux was supposed to play real nice with other OS's, so why did a simple file transfer kill my wireless connectivity? i have no access to internet via ethernet cable, so i cannot just download the driver i need now. shouldn't it still be in the computer still? somewhere? is there a simple solution to this, or has the wireless driver been wiped out by plugging in the ethernet? is this a bug that should be reported?

View 3 Replies View Related

Ubuntu Networking :: Macbook Pro Karmic Broadcomm Wireless Driver "Activated But Not Currently In Use"

Feb 2, 2010

My wireless was working perfectly until I accidentally let the battery run flat with the machine prevented from hibernating. Upon recovery, there was no wireless available. Checking the Hardware Drivers, I can see the Broadcomm driver as "Activated but not currently in use". Following the copious advice elsewhere I have disabled the driver, rebooted the machine, enabled it again - many times. Still the same message. What is stopping me from activating it? Bit of a noob so.

View 1 Replies View Related

General :: Activate Wireless Network Card Driver And Video Driver?

Jul 20, 2010

I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?

Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.

View 9 Replies View Related

Ubuntu :: How To Find Wireless Driver For Wireless Belkin Card?

Apr 1, 2011

I'd like to know how can I find a Linux wirelles driver for wireless Belkin card.

View 1 Replies View Related

OpenSUSE Wireless :: Install Driver For 14e4:4329 Wireless Pci Card?

Aug 17, 2010

i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG

View 4 Replies View Related

Ubuntu :: Driver Activated But Not Currently In Use / What To Do?

Apr 22, 2011

I can not get the Nvidia closed source driver to work..when i open the "Additional Drivers" it says that the driver is activated but not currently in use.
Another problem...I can not see my grub nor the Plymouth screen.

View 6 Replies View Related

Ubuntu :: Driver Is Activated But Not Currently In Use?

May 1, 2011

I am trying to get my new computer to work with the proprietary nvidia drivers, but unfortunatly I am having some troubles. When I activate the nvidia drivers in jockey and restart the computer, the DE fails to load unity, and no compositing is actually being done. When I check jockey, it says:

"this driver is activated but not currently in use" I have an NVIDIA GT 550M. I can use unity with nouveau, however there are some problems that I have noticed, like not resuming from sleep and some freezing, which I suspect is a result of the open source drivers(could be fixed in an update later). But does anyone know how to get the proprietary drivers to work in the mean time?

View 9 Replies View Related

Ubuntu :: This Driver Is Activated But Not In Use

May 29, 2011

I've got an issue where my nvidia drivers won't activate, which is a fairly large problem on my Asus G60VX. The reason it bugs me most is because it won't let me use a second monitor while the drivers aren't activated.

Here's my issue.

Now, I already tried going into Synaptic and removing all NVidia stuff manually, and then reinstalling, but this didn't fix my problem.

View 6 Replies View Related

Ubuntu :: This Driver Is Activated But Not In Use?

Jul 10, 2011

I just installed natty today after erasing the previous maverick and windows dual boot.Everything works fine.But there is one problem .The propriety driver for Nvidia seems to be activated but not in use.I still get unity desktop,(couldn't get it before installing the propriety driver).I have tried removing and activating it again but it ended up the same again.I know that this problem has been encountered lot of times,but I searched everywhere and didn't find anything.

View 9 Replies View Related

Ubuntu :: Broadcom STA Driver Activated But Not In Use

May 11, 2010

System-->Admin-->Hardware Drivers States my STA driver is activated, but not in use... ug. having so many wireless issues with 10.04 i've been pulling my hair out for a week now. I assume this is why it says my network UNCLAIMED as well.

View 9 Replies View Related

Ubuntu :: How To Install Wireless Card Driver

Dec 28, 2010

I am completely new to linux so a lot of this has been foreign to me. I have ran the lspci command to find out my wireless card is Broadcom Corporation BCM4313 and I found the driver for this card at:it won't let me post the URL for some reason...but i googled "Broadcom BCM4313 driver for linux" and it's the first link.I downloaded the 32-bit driver but now I have absolutely no idea what to do.The download has folders named lib and src, and a text file called Makefile.

View 3 Replies View Related

General :: Where To Get Driver For Wireless Card?

Aug 20, 2009

Where do I get the driver for installing my wireless card- BCM4310 (Broadcom Corporation) in Centos05? I'm not able to find one.

View 3 Replies View Related

Ubuntu Multimedia :: NVIDIA-CURRENT Driver Activated But Not In Use?

Apr 29, 2011

I just installed Natty. Installed nvidia-current via synaptic. Then uninstalled nouveau via synaptic also. Back to Unity desktop, I chose Additional Drivers and activated "nvidia-current". However, after reboot, the info window says this driver is activated but not in use.

View 9 Replies View Related

Ubuntu Networking :: BCM4322 Driver Activated But Not Working

Jun 17, 2011

I was trying to get the b43 driver work with my broadcom bcm4322 wireless card. I changed the kernel from 2.6.32 to 2.6.38 in order to make the b43 driver to work. When I booted with the new kernel the internet stopped working so I looked for a solution. I don't remember which website I went but it said that I have to re-install the STA drivers so I did that and rebooted and nothing happened. I decided to go back to the 2.6.32 kernel and re-installed the STA drivers. The wireless card (eth1) isn't showing when I run the command iwconfig

Code:
xavi@xavi-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
easytether0 no wireless extensions.
xavi@xavi-laptop:~$

I'm currently running Ubuntu 10.04 Lucid Lynx

View 4 Replies View Related

Ubuntu Installation :: How To Install Driver For Wireless Card

Mar 3, 2010

I got the native driver for linux already but just don't how to do it. It is an external wireless usb card, it's from Ralink.

View 4 Replies View Related

Ubuntu :: Bcm4312 Wireless Card Would Not Recognize The STA Driver?

May 20, 2010

I had Karmic a while back, but i got rid of it becasue of my Bcm4312 Wireless Card would not recognize the STA driver, or bcm43xx.In that time i learned a bit of command line stuff. anyways now that I have my internet working, I was just wondering What I could do with ubuntu. I am interested in the command line and Programming. Where could I learn more about the 2 subjects?

View 6 Replies View Related

Ubuntu Networking :: Install A Wireless Card Driver?

Jul 25, 2010

install a wireless card driver.

View 4 Replies View Related

Ubuntu Networking :: Wireless Card Driver Will Not Install?

Dec 27, 2010

Told me to fo to /var/log/jockey.logGot this I believe? what may be wrong?

2010-12-27 21:22:37,907 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2010-12-27 21:22:37,990 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx:

[code]....

View 9 Replies View Related

Ubuntu Multimedia :: Nvidia - Driver Is Activated But Not Currently In Use (compiz Fails)

Aug 25, 2011

I have a geforce 8400GS and nvidia-current installed. However, the Additional Drivers app advises that "No proprietary drivers are in use on this system" and that the driver is activated but not in use. I know other people have complained about this problem, but for me this is breaking 3D content and I can't get compiz to work either. When I try to start compiz manually (compiz --replace), I get this error:

Code: compiz (code) - Fatal: Couldn't open display My Xorg has nvidia as device driver. I'm using the NVIDIA X Server settings program to setup my two monitors, so I know that this is what is in use. In addition to the compiz problem (which I can get over), sometimes I can see the desktop background through the active window. It's hard to explain so I'll take a screenshot when it happens again. Things I've tried:

1. Installing nvidia's latest drivers - The installer was extremely picky, constantly complaining about other modules and drivers. After I finally managed to remove everything it didn't like and install it, X wouldn't load.

2. Reinstall nvidia-current - tried multiple times with no change.

3. Link /usr/lib/xorg/modules/extensions/libglx.so to /usr/lib/nvidia-current/xorg/libglx.so.270.41.06 - didn't make a difference.

View 7 Replies View Related

General :: Find A Driver For Pc Wireless Card?

Nov 13, 2010

Where can I find a driver for this pc wireless card? And how do I install it?

View 1 Replies View Related

Ubuntu Networking :: Pacth Wireless Card Driver To Allow Injection?

Apr 14, 2010

i would really like to know how to patch a wireless card driver so that i can start injection in aircrack for example let's say we have an "Atheros AR5007EG" do you know where to find the driver patch for ubuntu and how to patch it ?

View 1 Replies View Related

Ubuntu Networking :: How To Make/compile The Driver For A Wireless Card

Feb 16, 2011

I've been trying to make/compile the driver for a wireless card. The card is usb, it's titled Micronext MN-WD550M and seems to use the rtl8712 driver.Firstly, though I did this once two years ago I seem to have completely forgotten how to install a driver in ubuntu.

Secondly, I'm not sure I have the right driver anyway since in the notes in the readme it says it is for i386 (I run amd 64). The driver is here [URL] Thirdly, after clicking through various readmes and documentation without feeling any more intelligent, I then tried using ndiswrapper to install a windows driver and ubuntu would crash if the usb wireless card was plugged in. Blarg.I feel like this should be so simple I'm going to make a clean installation of ubuntu 10.10 shortly (for various unrelated reasons) so anything I messed up with ndiswrapper should be back to normal.

View 1 Replies View Related

Ubuntu / Apple :: Wireless Card Driver Install Error ?

Apr 28, 2011

I have MacBook 3,1. I just installed 11.04. When I go to activate the "Broadcom STA wireless driver" I get the message "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log" When I check the log the message is "2011-04-28 18:38:59,896 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted"

I have had 10.04 on this computer in the past and it worked fine, but this is a fresh install of 11.04. Any suggestions on where to go from here?

View 3 Replies View Related

Debian Configuration :: Install The Driver For Mi Wireless Card?

Apr 22, 2010

I'm trying to install the driver for mi wireless card. The instructions say that to build the tar.gz file, I have to:

# mkdir hybrid_wl
# cd hybrid_wl
# tar <path>/hybrid-portsrc.tarhybrid-portsrc-x86_64.tar.gz

The third step i don't understand. I want the folder of the driver to be located in a folder inside home called "Programas" so what I did was to open the terminal, went su, and then did cd Programas. Then I followed instructions 1 and 2, but I don't know what to put where it says <path>.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved