when I click on "Users and Groups" the dialogue box shows up, but I'm unable to make any changes because I'm not prompted for authentication (the "add", "delete" etc., buttons are grayed out). I'm using 10.10.
View 2 Replies
How is the super user determined for the dialog box that pops up when trying to perform administrative tasks, "An application is attempting to perform an action that requires privileges. Authentication as the super user is required to perform this action."? Does it always ask for the password of the default user created during the OS install, or should it prompt for the current user's password if that person is an administrator?I use likewise-open for windows domain authentication, so I typically log in as a windows user that likewise-open has added to the list of users on this system. I have given this user sudo access and added the user to all the same groups as the default user, yet whenever I perform an administrative task in gnome I am prompted for the password of the default user. Is this normal? It seems like the behavior would be to ask for the current user's password if that user is an administrator, and if so what determines that the current user is an administrator?
View 4 Replies View RelatedI'm running Debian Wheezy and I don't know why, but whenI switch to console F1(Ctrl+Alt+f1) I can't enter login information. It's like Debian didn't have completely starting and wait always.The F1 console looks like this:
[screen content]
Starting enhance syslogd: rsyslogd.
Starting system message bus: dbus.
[code]...
I want to configure SSH key-based authentication and SSH password Authentication in same machine for different user .
View 1 Replies View RelatedI have a strange behaviour on a Slackware 13.1 box:
Code:
user@host$ su
su: Authentication failure
[code]...
I'm looking for the easiest or cleanest way to copy a user's settings to a new user's settings. I don't need to copy any files from the original user, but setting up a home directory would be great.
If it's done at the command line, that would be just fine. I'm very familiar with working at the command line.
I would like to be able to get squid or dansguardian to authenticate a user account against active directory so that a users browsing activities can be logged.
I can find lots a very useful info on how to set up ntlm_auth etc, but all of these methods produce a pop up window when the user launches the browser.
I'm posting this thread because I would like to be able to authenicate, but without a pop up window. Is there a way of automatically carrying out this authentication so that the user is unaware of it.
We've previously attempted authenticating against an NT4 PDC, but the users worked out that they could use any user account on the network, not just the user that was logged in which kinda defeated the whole idea of logging the users activity.
My current setup is:
Windows 2003 AD
Windows XP Clients, soon to be converted to windows 7.
Fedora 11 running squid and dansguardian.
Something has gone awry with my login. After the usual username/password prompt my laptop comes up with smart card authentication & I can't login. How do I get away from the graphical login so I can login & correct the problem?
View 3 Replies View RelatedI have 2 users and I would like to copy all the files and folders in one home dir to another.... sounds simple, til i got started. Ive tried
Code:
sudo cp -nRv /home/user1/* /home/user2
but that didnt copy the .* folders. Im after the firefox and thunderbird folders mainly, but all of them is OK too.
im talking about the .adobe, .amsn ..........
How can I copy the .* folders from one user home folder to another and then give the correct permissions to the new user.
I need to enter credentials for a system wide proxy, on a fresh install of Kubuntu 10.04. Everything hunky dory, but: Network Settings->Proxy->Authorization has 'username:' and 'password' grayed out all the time; even at 'Manually specify ...'. The only 'alternative' (not to chose from) is 'Prompt as needed'. But I don't get any prompt, and so I'm out of luck. To me, this looks like a bug. Because one should be able to enter a username and a password there, for good.
View 9 Replies View RelatedI'm trying to create a user account for my children in Ubuntu 10.04
When creating their account, I have turned off the 'Connect to ethernet and wireless' option of the Advanced Settings.
However, when I log into their accounts, they still have full access to the internet through both the wireless and ethernet connections. Is this option for some other purpose?
Is there an alternate way to limit internet access for childrens' accounts in Ubuntu? (I'm used to MS Family Safety as a filter for internet access - is there an eqivalent for Ubuntu?)
This applies to users of 10.04 (64 bit), but I would like to hear from those running 10.04 (32 bit) and 9.10 (64 or 32 bit).Would you be good enough to answer this question: Do you have an �enable scanner option� (or a variation of that phrase) in (GOTO) System-Administration-Users & Groups- [Your Admin Account]- Advanced Settings- User Privileges?It would be immensely helpful of you if you could do this and post me your answer.
View 2 Replies View RelatedI just added a new user to my ubuntu by:
useradd -gdevelopers -d/home/peter -m peter
when peter logs in (after I created a passwd for him) he doesn't see the shell as I do:
me:
adhg@server:~$
peter
$
ALSO, he can't user the TAB to move inside a folder (when you type cs /home/p and use tab to get /home/peter)
My normal prompt looks like: username(at)ubuntu + current directory. (Odd format, it doesn't really look like that, but I was told I needed 15 posts to post an URL).Whenever I change user with "su username" (at least when changing from root to normal user), this prompt completely disappears. All it says on the left in front of the input "$". Also the history doesn't work, and the tab key doesn't complete anything, but rather acts as the normal tab in an editor. do I fix this? It is very annoying. Sorry for the stupid question, but I've searched around for an answer, finding none.
View 1 Replies View RelatedI have just installed ubuntu 10.10 with wubi on a computer with windows vista.I have wireless access with ndiswrapper (), but i have one problem the autorun prompt doesn't work with anything.I have reinstalled wubi twice, and the same problem occurs.
View 6 Replies View RelatedI have one Ubuntu 10.04 machine that is configured this way.I want GDM to prompt the user to enter their username via a text field, and then a password, instead of displaying a list of users to choose from.One way to configure GDM's appearance is to run the following from a terminal: gksudo -u gdm dbus-launch gnome-appearance-properties.If I remember correctly, there is a different dialog to run than "gnome-appearance- properties" that allows changing whether GDM prompts for a username or displays a list. But I do not know what it is.
View 2 Replies View RelatedI'm facing a problem in a - at least I though it would be - simple BASH script. I use 'awk' to find matching lines in a file, and then use while-read to modify each line matching the expr casted in awk. It looks like this:
Code:
function foo() {
awk '$NF~/^./{print $NF}' FILE.TXT|while read line; do
bla bla bla ...
[code]....
However, each time the execution hits the 'read choice' line, it doesn't prompt - as well as pause the excution - the user for a choice: it just passes it. This problem just happens inside the while loop.
I got a little problem upgrading my ubuntu-nas with some storage.I wanted to add a new harddrive to my lvm but I stuck before getting to this point.I want my harddisc to be encrypted before adding it to the lvm.I tried the following:
Code:
# sudo cryptsetup luksFormat /dev/sdb1 -y
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): yes
... and nothing happens. dmsetup ls returns nothing.
I recently installed likewise 6.0 on a Ubuntu 10.04 box and I was able to login as a Domain user. However my domain user account is not showing on the "User Settings" panel (I can only see locally created accounts). And if try to change login shell by typing "chsh", then it tells me user "DOMAINusername" does not exist in /etc/passwd.
Does anyone know a way around this?
Is it possible "reset" all (X, GDM related) permissions/settings of one user? What would cause one specific user not to be able to log into anything via gdm/the login screen? After providing the proper password, the screen goes black and then jumps back to the login screen. No session alternative works, not even xterm or gnome failsafe. I can however log in via the console (Ctrl+Alt+F6, recovery etc). With another user I can log in via GDM just fine, and deleting and re-adding the "broken" user doesn't make any difference.
Some (maybe) relevent logs:
part of syslog:
Quote:
Dec 12 01:20:58 <specific user> pulseaudio[1358]: core-util.c: Home directory /etc/timidity not ours.
Dec 12 01:20:58 <specific user> pulseaudio[1358]: lock-autospawn.c: Cannot access autospawn lock.
[code]....
Choose Menu System->Administration->Users and Groups
I am able to see my Users Settings as follows:
User name: mike
Then why I still see the following prompt line? code...
If my understanding is wrong, then how can I change it in this way?
I have bought a Mac Laptop however it has a username and password which I don't know. I've looked all over to see how I can overcome this lot's of people have said to enter at Grub prompt to take you to recovery, however I have no Grub prompt and Mac is not booting from cd rom.
View 1 Replies View RelatedDoes Fedora Now Prompt End Users To Install New Versions? If so, what a terrible idea and how do I disable it? So, I get a late night call from one of the people I support with their PC. You know, the basic PC user who barely knows enough to be dangerous. I'm sure we all have friends like this, who we help out and keep Linux running for them. Anyway, he says Fedora prompted him to upgrade to Fedora 15 (from 13) and of course, he says OK. He usually says OK when fedora asks to update his software.
Now things are hosed, he can't get on-line and worst of all, he's running F15 with Gnome3 and can't find his way around or do the things he's used to doing. Why on earth would fedora prompt to upgrade to a new version via the net? (..btw - he said it took forever.. ) I'm sure this exact scenario will be played out 1000s of times and peeps like me will be wasting lots of time straightening things out after the fact. Seems to me Fedora should not prompt for full version upgrades. It's trouble waiting to happen and that kind of thing should be user initiated by someone who actually knows what they are doing, so as to avoid the scenario that just played out with me.
I need to run one command as different user with out a password prompt.
I did this
Code:
one localhost= (two) /usr/bin/whoami
This work but it prompts for password. Is there a way that can be done with NOPASSWD option ?
I am currently responsible for administering a shared Ubuntu machine with several unrelated users. Some of these users own multiple accounts and would like to "chown" files between them. Currently, I must handle such requests manually, and this is inconvenient.
I am looking for a way to allow non-root users to chown files with authentication (i.e. prompt for the password of the user to which ownership is being set to). This would prevent an exploit such as:
Quote:
cp /bin/bash ~/sudobash
chmod 4777 ~/sudobash
chown root:root ~/sudobash
Does such a solution exist?
I just finished following the instructions found here to install FreeNX on my ubuntu 10.04 server. It went smoothly, just used the default keys.Once I had that all set up I scrolled down and followed the instructions to set up the client and that went fine as well.My problem is with actually using the program.When I try to log in I get the error "Authentication failed for user tony" (my username). Do I need to change anything in the configuration other than setting it to use gnome and putting in the host address?oes it make a difference that my ssh settings only allow rsa login? I logged into the server with ssh to see if that helped but it did not. I even tried using the ssh key with the FreeNX Client but that did not work
View 9 Replies View RelatedWhen I try to boot I only get to the grub rescue prompt doesn't matter if I try booting from ubuntu 11.04 cd windows 7 disc or the hard drive. At the moment ubuntu 11.04 should be installed although it gave me a ton of errors as I installed it and as soon as i restarted the computer i got this prompt.
View 2 Replies View RelatedI'm trying to change the bash prompt and based on the man pages $ should show a $ which changes to a # for a SU. However, this doesn't happen on my machine, it's $ for both user and SU.The line in .bashrc is:export PS1="u@h:w$"
View 7 Replies View RelatedI want to use nomachine, instead of freenx, and well it isn't working. SSH server works and all, because freenx works., same for neatx. But I hear with nomachine you can see the main display of the computer? Is this true? Well one way to find out, but whenever I try to login I get: Authentication failed for user x. I don't know why, neatx and freenx worked, even x2go, but not this.
View 1 Replies View Relatedhow can i provide authentication to the user, when he submits his name n password on the internet browser?im unable to fetch username n password from browser?
View 2 Replies View Related
