I just tried mounting my Iomega 1tb hard external hard drive, but it doesn't seem to work. The drive doesn't show up in nautilus. When I look at it with parted it shows as a ms-dos filesystem. If I plug it into my imac, it shows doesn't mount either, but in the driveutility it shows up as a fat32.Windows 7 doesn't seem to helpfull as it just says that the drive needs to be formatted.Is there any way to recover my files before I format, or better yet solve this problem without formatting?
I have been a Linux user for about 6 years now, and recently switched to Fedora just to try something new. I used Ubuntu for the majority of the time so I am somewhat familiar with the command line, but seem to be having trouble with my external HDD. Ubuntu automounted it no problem. Fedora doesn't seem to like to do that. I tried searching and I did what almost every thread insisted upon; which is mount /dev/sdb(that is what dmesg said) but it says already mounted or /mnt/busy. So this is the extent of my Terminal experience with mounting an external drive, and I am completely dumbfounded as to why it simply won't mount. I am liking Fedora so far and so long as there is a remedy for this I don't plan on going back.
Let's begin this yelp with a story. I lent my 16GB OCA Rally 2 flash drive to a friend to use. He plugged it into his brand new ASUS compact notebook to get some files off of it. For some reason, while he was using it, it stopped working. He tried plugging it into a desktop machine we have in the office and then into my computer. The thing doesn't work anymore.When I run dmesg after plugging it in, I get the following output:
Code: [ 233.475963] usb 2-1.2: new high speed USB device using ehci_hcd and address 4 [ 248.508945] usb 2-1.2: device descriptor read/64, error -110
I am trying to mount a 2nd NTFS storage disk in my new installation on Ubuntu 10.10, I can see it in the disk manager, but cannot access the files, I tried following the steps on this on another thread and i got the following error:
I am attempting to put vista onto my laptop from a Full install of Ubuntu 10.10, but when I boot from my vista CD and attempt the instalation it says I have to have my drive formated to NTFS, I have tried to google how to get this done.ied to go to ystem>Administration>Disk Utility and then edit the type of the partition but there are like 20 options and none of which are just NTFS. what should I do?
I recently updated to Kernel 184.108.40.206 available from the: Mainline. The reason I have done this is because it corrects an error that prevents my web-cam from functioning (Microsoft VX-3000). So, with this kernel I have a functioning web-cam *but* I have noticed now that my USB Hard Drive intermittently now unmounts. I am unable to remount the device without rebooting Ubuntu. The drive was mounting dirty but installing NTFSProgs and running NTFSfix was the solution for that. I have disabled power management completely on my machine by editing /etc/default/acpi-support and changing SUSPEND_METHODS to "none" and both ACPI_SLEEP and ACPI_HIBERNATE to false. This seems to have made the USB hard drive take longer before it unmounts but it does still unmount. Also as a GRUB2 boot option I have tried acpi=off but this also disabled my usb keyboard and mouse and my BIOS isn't flexible enough to work around that so I cannot use that option. With these things in mind are there any other avenues I could pursue and things I could try?
Edit: It may not be "unmounting" it just disappears. Also, I could try to whitelist the USB controller in /etc/default/acpi-support if I knew how to find out what it was called but I do not know how to do that.. Yet !
Edit2: I moved the physical plug to another slot where it connects on the computer. If this disconnects again I'll swap out the cable. If it disconnects again.. I'll go buy a huge 1TB internal sATA and call it a day. ~
Some time ago I reformatted my hard drive to just run Ubuntu. Now I need to install Windows XP but when I put in the install disk it says it can't find a hard drive. I'm guessing this is because the hard drive is formatted to a Linux-specific ext4/extended/linux-swap set-up. The ext4 partition is 71GB and only uses 13GB. I have 57GB free. I can see all this in Gparted but how do I now split that ext4 up and free some space for ntfs partition for Windows? Indeed is this what I should be doing? Obviously I can't unmount the ext4 bit whilst in Ubuntu.
Ultimately I want to do a complete reformat of the hard disk and just install Windows XP for the time being (I'm handing the laptop in for a hardware service).
I've been searching for a way to do this with no luck. I've got a 1TB external hard drive I used to share over the network from my Windows desktop -- which is now a Ubuntu desktop.I've tried setting it up as a samba share, and the closest I've gotten is mount error(12): Cannot allocate memory. I've tried the suggestions (editing /etc/security/limits.conf), and that removed the warning I got from testparms but didn't fix the mounting on my mythtv box.
I have two 1TB HDD's formatted in NTFS, one has windows and other stuff i use even on linux and the other is all media. i can mount them easy, but this is a minor annoyance because everytime i log in i must type in my password. is there no way to have them auto mounted on startup?
(Using ubuntu 9.04) I really don't want to trash my system! I have an external usb hard drive I want to automount on bootup / startup. Not 100% sure of the best / safest way: here is some info on my drives
ONCE MOUNTED THROUGH FILE MANAGER AND RUNNING DF AGAIN HERE IS THE DRIVE
Here is my fstab file
So the drive is a NTFS drive and it's /dev/sdb1 and label is /media/Mybook
Does someone know how to reconfigure this? I have three hard drives.
1. Sata 1TB. It has Windows xp and ubuntu 10.10 on it 2. old 30G drive. It has ubuntu 10.04 on it 3. Old 120G with ubuntu 10.04
I installed the oses on each drive by disconnecting the others. So each drive has a boot record, and I can choose by pressing F11 at boot. All ubuntus can see and mount the NTFS partition except the one I installed last. It's on the 120G drive.
It's been about three days since I've made Ubuntu my OS and I'm quite surprised to see, when I tried it first via wubi, that it actually reads NTFS partitions.It made backing up easy for me though now is it still alright that I still keep them NTFS or should I now start converting them to ext4? Except for my external hard drive.and what's the difference with ext3 and ext4? I was shown these options when I tried formatting my hard drive.
My other hard drive has two partitions which was done when I installed windows a few years back..If I would to reformat should I combine these partitions into one and make new partitions via that?
I've got a SATA drive (formatted as NTFS) I share between an XP machine and an Ubuntu machine. From Ubuntu, I never write to the drive... I only write to it from the XP box. So, I am wondering about a couple of things:
- If I do write to it from the Ubuntu machine, will that create any problems. By that I mean, if I add, rename, edit files from the Ubuntu machine, will that negatively affect anything?
- If, from the Ubuntu machine, I set perms on the files and folders on the drive, how will that affect things when I plug it back into the XP machine?
Device Boot Start End Sectors Size Id Type /dev/sdb1 16065 584830259 584814195 278.9G f W95 Ext'd (LBA) /dev/sdb5 16128 584830259 584814132 278.9G 7 HPFS/NTFS/exFAT
I have 2 hard drives both are 278.9GB in a mirror raid 1. Why does 2 partitions show up? Are they referring to each physical hard drive? I want to believe that this is the same partition and not two different physical hard drives since both are in the same 'start' and 'end' range. Is that correct?
I'm having problems mounting my NTFS external hard drive .
1.padlock: VIA PadLock Hash Engine not detected. 2.PPP MPPE Compression module registered 3.PPP BSD Compression module registered 4.PPP Deflate Compression module registered 5.npviewer.bin: segfault at ff99cd48 ip ff99cd48 sp bfc8afac error 4 6.usb 4-2: new high speed USB device using ehci_hcd and address 5
my external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
I am trying to mount an external USB hard drive. I'm using Debian Lenny 5. I tried to right-click on the hard drive and then select the mount command inside the gnome desktop environment but it gives me an error. Is there an easy way to mount and unmount this hard drive? The hard drive itself is formatted from the factory in NTFS. I'm going to leave it in this file format is a need to use it with Windows machines as well.
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive