Ubuntu :: Unknown Keyword In Configuration File: Gfxboot?

Jan 12, 2011

recently got this message when USB booting:Unknown keyword in configuration file: gfxbootI used to have the "Unknown keyword in configuration file: ui" problem, which was spread throughout the forum. I know people have fixed it by removing the "ui" in the config file. This is what I did in /syslinux/syslinux.cfg

# D-I config version 2.0
include menu.cfg
default vesamenu.c32


View 3 Replies


Ubuntu Installation :: Netbook / When Boot From Usb Stick, Getting Error Unknown Keyword In Configuration File?

Oct 25, 2010

I'm having problems installing Ubuntu 10.10 Netbook onto my Asus 900. I downloaded the .iso then used the "make startup disc" feature in my Mint 9 desktop machine to make a usb install disk. All appears well at that point. When I try to boot from the usb stick, I get an error message as follows:

"SYSLINUX 363 Debien-2008-07-15 ......
Unknown Keyword in Configuration File
boot: "

and the cursor just hangs there and doesn't respond to the keyboard.

I also tried it on another Asus and a Gateway Laptop with the same results.

My intention is to have this the sole OS on my little Asus 900.

View 4 Replies View Related

Ubuntu Installation :: Booting From Usb - Unknown Keyword

Jul 10, 2011

I've set up a sandisk usb stick to boot/install 11.04. On two eepc netbooks I get the same issue when I try to boot from the usb: SYSLINUX 3.63 Debian 2008-07-15 EBIOS Copyright 1994-2008 H Peter Anvin Unknown keyword in the configuration file

View 3 Replies View Related

Software :: Warning: The Build_dir Keyword Has Been Deprecated; Use The Variant_dir Keyword Instead

Dec 5, 2010

im using


scons prefix=/usr qtdir=/opt/qt4

to configure and i get these compilation errors


scons prefix=/usr qtdir=/opt/qt4
scons: Reading SConscript files ...
Platform: Linux i686

scons: warning: The build_dir keyword has been deprecated; use the variant_dir keyword instead.

File "/mixxx-1.7.2/SConstruct", line 42, in <module>
WE ARE IN: /mixxx-1.7.2/linux_build
QT path: /opt/qt4
Loading qt4 tool...


ive been scratching my head at this one for days, i turned on the ubuntu virtual machine and checked what apt wanted to pull, and im suspecting that i need to find the source versions of several packages in regard to qt4 and libqt4 and various libqt4 extensions.

View 4 Replies View Related

Debian Configuration :: .doc And .xls Unknown File

Sep 29, 2010

I recently installed office 2007 under wine, but since I have it no longer know what to open .doc or .xls files with, I was using Gnumeric but now when i go to Properties -> "Open with" there is no longer anything in the list and even when i attempt to add to the list nothing comes up. If anyone know what way you can manually add file types and associate them with programs

View 1 Replies View Related

Ubuntu :: Installing Maverick From USB: "Unknown Keyword" Then Stuck At "boot:" Prompt?

Oct 12, 2010

Had a couple of problems installing Maverick from USB last night and figured I should share in case someone else finds themselves in the same situation.Hardware: HP 4510s 1.20GHz Duo CPUStart-out OS: Karmic 9.10Downloaded 32-bit ISO of Maverick 10.10Formatted USB drive to FAT32 using Gparted as Startup Disk Creator would not format it for me for some reasonRan Startup Disk Creator on formatted driveRebooted, opted to boot from USBAfter the boot menu but before being given any setup-related options from the Ubuntu installer, I got the following error: Quote:

SYSLINUX copyright info (I forget exact wording)
Unknown keyword in configuration file
boot: _


View 6 Replies View Related

Slackware :: Unknown Username "avahi" In Message Bus Configuration File

Jul 4, 2011

i started up my computer today in runlevel 3, and noticed a small message amongst many others that has got me curious.


Unknown username "avahi" in message bus configuration file

View 4 Replies View Related

Ubuntu :: Multiple File Search \ Search A File For A Certain Keyword?

Nov 13, 2010

for example we search a file for a certain keyword..is there any application available which will enable us to search for a single keyword in all the files within the folder ?i want to search for a keyword in about 1000 files..if i do it manually it will take loads of time..

View 6 Replies View Related

OpenSUSE Install :: Could Not Find Kernel Image: Gfxboot

May 23, 2010

I've been trying to get a live stick of OpenSUSE 11.2 running and I continuously get a script of "boot: could not find kernel image: gfxboot" running down the screen. Any other version of Linux will run fine off this same USB and I have not seen this error cited anywhere on these forums or Google.

View 9 Replies View Related

Debian Configuration :: No Printing From LPR - Unknown Printer

Oct 19, 2010

I have installed an HP LaserJet 2200 network printer using CUPS successfully and can print test pages and stuff from OpenOffice, Evince etc. But no luck printing from lpr. Using lpstat seems to suggest all is well:

$ lpstat -t
scheduler is running
system default destination: HP-LaserJet-2200
device for HP-LaserJet-2200: socket://
HP-LaserJet-2200 accepting requests since Tue 19 Oct 2010 14:01:50 NZDT
printer HP-LaserJet-2200 is idle. Enabled since Tue 19 Oct 2010 14:01:50 NZDT
Ready to print.

If I now try to print 'test.txt' using:
$ lpr test.txt
nothing happens. Try calling the printer by name:
$ lpr -P HP-LaserJet-2200 test.txt
lpr: HP-LaserJet-2200: unknown printer

I have added my user name to the lp and lpadmin groups. Trying the above as 'sudo' results in the same result. The only thing I've noticed is that when printing something from OpenOffice, in the document print status I get the message 'Processing - not connected?', although printing still works.

-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_NZ.UTF-8, LC_CTYPE=en_NZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

View 1 Replies View Related

Debian Configuration :: Wireless Interface - Unknown Error 132

Apr 18, 2010

After updating and subsequently restarting today, I can no longer bring up my wireless interface:

ifup wlan0
SIOCSIFFLAGS: Unknown error 132
Could not set interface 'wlan0' UP
SIOCSIFFLAGS: Unknown error 132
SIOCSIFFLAGS: Unknown error 132
Failed to bring up wlan0

lo no wireless extensions.
eth0 no wireless extensions.

wlan0 IEEE 802.11abg ESSID: off/any
Mode: Managed Access Point: Not-Associated Tx-Power=off
Retry long limit:7 RTS thr: off Fragment thr:off
Encryption key:off
Power Management:off

lsmod | grep iwl
iwl3945 77904 0
iwlcore 127432 1 iwl3945
mac80211 180929 2 iwl3945, iwlcore
cfg80211 142905 3 iwl3945, iwlcore, mac80211

View 1 Replies View Related

General :: Making .trb File From C Source File - Unknown MCU Atmega128

Jul 21, 2010

I am trying to compile C source file to generate .trb file (turbo file) which will then burn on trubo sim using TP2. When I comiple the code following error is occuring. before going through belwo error I was getting error 'Unknown MCU atmega128', known MCU are: (list appread), then I change the configuration and set the MCU to supported list then following error is occuring.

XXXXXXX@MYN8G5R52S /home/my-aip/my-aip
$ make
avr-ld -o my-aip.elf my-aip.o -L../../turbo-devel/lib -T turbo.lds -d -r --emit-
relocs -R ../../turbo-devel/lib/public_calls -lformlib -laes -lm -lc `avr-gcc -p


Now strange thing is that whats so ever the value is of atmegs.. is I am facing same issue.

View 1 Replies View Related

Debian Configuration :: Cannot Turn On Nvidia - Unknown Header Type 7f

Dec 24, 2015

on my dual HD5500/GT940M. I can not turn on Nvidia. just install bumblebee and got the error "unknown header type 7f" if I remove bumblebee, Nvidia 340 loaded but system run on HD5500, no way to use Primus or to switch to 2nd card.

View 0 Replies View Related

Debian Configuration :: Unknown Root LV In Gnome-disk-utility ?

Jul 24, 2011

Gnome-disk-utility doesn't show filesystem type, mount point, filesystem label, size¦ of my / filesystem.

I am running Debian Squeeze using lvm2. I have two HDDs and each has one primary partition, which are used as PVs. Having two VGs, each VG has it's own PV.

There are some LVs and all of them except the LV holding the swap space are formatted with XFS. Now gnome-disk-utility shows everything about my /home LV, another LV containing a whole Ubuntu installation,¦ only the / LV (and Swap LV, but I don't know what it is supposed to show there) is/are missing nearly all information.

Otherwise the system is running perfectly well and the Debian / LV is shown normally in Ubuntu's disk-utlity, as well as all other LVs.


Physical volume

Volume group

Volume group


Logical volume

Logical volume

Logical volume

Logical volume

Logical volume

DebianCopy is a copy of my Debian installation (different fs label and UUID). DebianII (again different UUID and label) is a copy too, but there I tried out newer (testing) versions of udisks/lvm2/udev and right after the upgrade it showd everything as it should with the additional advantage of the newer udisks-version showing my VGs, but after a reboot it showed the same behaviour as before or even worse, because the information about other LVs was missing too.

In the end I even modified the fstab. Originally it contained the /dev/mapper/vgbay... entries and I replaced them with LABEL=... and finally with UUID=..., but it didn't make any difference either.

View 2 Replies View Related

Fedora Installation :: Unknown Printer Configuration Application - Packages To Install?

Jan 9, 2011

Just installed fedora 14 and do not have a printer config app. Im not sure what packages should be installed. I just came back to linux after years off. Lots different from redhat 6.

View 9 Replies View Related

Debian Configuration :: Jessie (Stable) 8.4 Update Unknown Partition Table Message

Apr 17, 2016

I update Jessie "stable" 8.2 to 8.4 and now I get 5 minute interval kernel messages:

Apr 18 06:39:52 OraHost kernel: [131985.494726] sdc: unknown partition table
Apr 18 06:45:03 OraHost kernel: [132295.755942] sdc: unknown partition table
Apr 18 06:50:03 OraHost kernel: [132595.946564] sdc: unknown partition table
Apr 18 06:55:13 OraHost kernel: [132906.139327] sdc: unknown partition table
Apr 18 07:00:23 OraHost kernel: [133216.340555] sdc: unknown partition table

I believe this has something to do with an mdadm update which was included in the release. When I configured the array, I didn't partition the disk devices, so maybe that has something to do with it. I am thinking of rebuilding the array and partitioning prior to build, but a quick fix would be referable.

And also something appears to have happened to the raid device since the update.

Prior to update, the array was /dev/md0 - now it is /dev/md/0 which is a symbolic link back to /dev/md0.

mdadm --detail --scan now reports /dev/md/0 where previously it reported /dev/md0

I created a new RAID1 array on a fresh system and immediately after the create, these messages appear at 5 minute intervals.

View 0 Replies View Related

OpenSUSE Install :: Operating System From A USB - Error "Could Not Find Kernel: GFXboot"

Jul 13, 2010

I have a problem installing the oporating system, from a USB. I keep getting the error: Could not find Kernel: GFXboot. I have used a USB loader to put the ISO file on the flash drive as well as extracting the file using winrar. (separate occations) I have also tried both LIVE CD as well as the full DVD.

View 1 Replies View Related

Ubuntu :: Firefox4 Built-in Keyword Searches Are Gone

Mar 17, 2011

This used to work by default in previous versions of FF.

imdb $movie
wiki $some_topic

now they don't.

My personal favorite was

man $page

Open about:config and search for keyword.URL - it should be blank. Double-click to edit and enter


[URL] This will restore the previous Firefox keyword search behavior. No restart necessary.

View 2 Replies View Related

Ubuntu :: Unknown File System All Over ?

May 13, 2011

I have the following error : unknown filesystem. grub rescue after incorrect dual boot with Windows 7. - i was so stupid to install Linux and windows 7 on the same partition ....I did some investigation i found online that i should continue with supergrub disk

Steps i have taken first i installed rescatux iso on dvd then cd then usb changed BIOS offcourse to boot from these locations. Then i tried SuperGrub disk 2 did exactly the same but still i am not able to recover anything then i tried supergrub disk 1 all over again dvd cd rom and usb but i don t get the option to recover windows bootloaders After that i was able to start my pc with the ubuntu run from USB

Is there anybody who any tips where to start now i really need my windows for workrelated stuff the usb version gives me the option to fully install UBUNTU. If i do this do i then overwrite my windows 7 partition again?

View 1 Replies View Related

Ubuntu :: Grep Script That Finds Searched Keyword

May 16, 2010

I need to write a script that can search up to 3 parameters and find all files containing those words. then display them and the amount of hits it got.if the first parameter exists, then we can assume we are looking for the word supplied.if the second parameter exists, then we are looking for files with both keywords.if third parameter exists test the second parameter for the values ('and', 'or', '-v') and search accordingly. These are the only values accepted as the the second one when 3 parameters are present.

lastly, if there are zero or more than three parameters echo as an error and when 3 parameters have been entered we echo an error when the second parameter is not one of the following: 'and', 'or', '-v'.

View 1 Replies View Related

Programming :: Remove Everything From Starting Until Some Keyword?

Mar 24, 2011

I have a multiple txt file in one folder. I would like to remove everything from starting until find string keyword in one folder. Here is the sample of my text:



So i want to remove everything from starting until reassemble. Here is the sample output:



I have multiple file in one folder. So how to use any script to read in one directory folder and do a same task. I prefer using awk, sed or perl.

View 5 Replies View Related

Programming :: Use Of Auto Keyword In GCC4.4?

Apr 15, 2010

I am using latest GCC version GCC4.4 in my linux. my code snippet:

auto const char *ostr = ((int *)node)->str;

When i compile this, i get an error as follows:

error: auto will change meaning in C++0x;

View 13 Replies View Related

Fedora :: Yum : List Installed Packages By Keyword?

Apr 21, 2011

I want to list all installed packages by keyword. For example I want to know what packages were installed related to "game". How can I do that in Fedora?

I tried 'yum list installed', 'you search' ... but still can't find a solution. I'm not a yum expert .

View 2 Replies View Related

General :: Redirect Data Starting From A Keyword?

Apr 10, 2011

I have a file and at some point in the file the string "DONE" appears (it's unambiguous). I want to redirect all that is coming starting from the next line to a new file. How do I do that?

View 6 Replies View Related

Red Hat :: RHEL5 Gvim Keyword Color Coding?

Mar 19, 2010

I'm working on RHEL5 dealing with AS (ActionScript) files in Linux GVIM Editor but everything is in blue color. Can i set color coding for my keywords?

View 3 Replies View Related

Ubuntu :: Unknown File Types In /home Folder?

May 13, 2011

I've recently upgraded from 10.04 to 10.10 (a bit late, I know), but have been getting repeated messages telling me that the filesystem is running low on space.

I've run apt-get autoremove and autoclean, but there is still insufficient space for me to upgrade to 11.04.

Whilst looking through the /home folders, I came across a number of 2 character titles folders in the /home/user directory. These have the extension.file. Does anyone know what they are, and can I delete them?

View 9 Replies View Related

Debian :: When Editing My Xorg.conf - Add The Automatically Keyword ?

Oct 17, 2009

The owners manual of my monitor gives me the following informations:

When editing my xorg.conf, do I have to add the automatically 'keyword' ? (saw nothing about it in man xorg.conf or man nv)

View 6 Replies View Related

Ubuntu :: Error - The Configuration Could Not Be Saved - An Unknown Error Occurred

Oct 4, 2010

Whenever I try to change a user full name, through System / Administration / Users and Groups, I get the following error: The configuration could not be saved - An unknown error occurred. Running Ubuntu 10.04.1 LTS 64 bit, freshly installed.

View 2 Replies View Related

Ubuntu Servers :: Mysqld.pid File Error On 8.04.4 LTS - Unknown Variable

Feb 4, 2010

I'm running Ubuntu 8.04.4 LTS to host a moodle server in a school.. moodle is running OK - but I'm having problems with MySql Any mysql command generates:

unknown variable 'pid-file=/var/run/mysqld/mysqld.pid'

I've taken a look in unknown variable 'pid-file=/var/run/mysqld/ and there is no mysqld.pid file I have followed these instructions that I found elsewhere:

If there�s no mysqld.pid inside /var/run/mysqld directory, create mysqld.pid
# cd /var/run/mysqld
# touch mysqld.pid


But after reboot the mysqld.pid file is missing again.. I can access mysql via phpmyadmin - but webmin fails with unknown variable 'pid-file=/var/run/mysqld/mysqld.pid'

View 8 Replies View Related

Ubuntu Installation :: Grub Error Saying Unknown File System?

Sep 29, 2010

i installed ubuntu 10.04.. all very nice, but not the os for me.. lightscribe problems, front ir panel problems. minor niggles for sure, but enough for me to go ahead with formatting and installing windows. simple job...or so i thought... using windows set up, i formatted c: and continued with install...on first restart i got a grub error saying unknown file system... i have tried loads of different things... fix mbr fixboot, that nt60 one. dban wouldnt work either.. im at my wits end ive spunked the best part of 1000 on this system and my wife is nagging me.

View 4 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved