Ubuntu :: Unable To Install DansGuardian - Getting Error

Jan 22, 2010

I cant able to install dansguardian I get the following error..

karthick@Learners-desktop:~$ sudo apt-get update .....
Reading package lists... Done
karthick@Learners-desktop:~$ sudo apt-get install dansguardian tinyproxy fireholReading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
The following NEW packages will be installed:
aggregate dansguardian firehol tinyproxy
0 upgraded, 4 newly installed, 0 to remove and 1 not upgraded.
Need to get 727kB of archives.
After this operation, 3609kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Err http: [URL] aggregate 1.6-4
403 Forbidden .....

View 2 Replies


Software :: Webmin Dansguardian Setting Up Multiple Groups Gives Error

Mar 10, 2010

I am running Webmin Squid and Dansguardian. Works great. Trying to set up multiple groups now. In the Dansguardian module it has an icon to set up lists and configs for multiple groups. I click it and I get the following:
Global symbol "$debug" requires explicit package name at /usr/share/webmin/dansguardian/setupfiltergroups.cgi line 114.

It repeats this same error message for line 123 138 139 141 302 and 315. I am running Ubuntu 9.10 desktop. Ubuntu is up to date. Not sure if I need another package or not? When I installed Webmin, I installed apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl when I set it up, so I am not sure if I need another module or anything to help with the error?

View 2 Replies View Related

OpenSUSE Install :: Make Dansguardian Start Automatically Upon Boot?

Nov 29, 2009

I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly

View 2 Replies View Related

Ubuntu Multimedia :: Unable To Install Multi-Disc Game - Unable To Eject CD-RW / DVD RW Drive DBus Error

Apr 22, 2010

I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending

View 3 Replies View Related

OpenSUSE Install :: Get An Error Message That Basically Says:kernel.desktop - Unable To Install, Exit Status 127.I?

Apr 28, 2010

I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.

View 7 Replies View Related

Ubuntu Installation :: Unable To Install 10.04 / Nouveau Error

May 30, 2010

On friday I tried upgrading my kubuntu karmic to lucid. The upgrade failed for reasons I've forgotten... the upgrader said it had run 'dpkg --configure -a' or something, which I assumed meant that it was restoring the OS to a usable state... which it did not and now I have a broken distro.TO THE POINT. I backed up my files and decided to do a CLEAN INSTALL of Lucid.

View 3 Replies View Related

Ubuntu Installation :: Unable To Install On Pc Mounting Error?

Dec 23, 2010

I was trying to install Ubuntu 10.10 using a dvd onto an older pc i have. Specifically the pc has 512mb ram, 160 gb hdd, intel pentium 4 2.93ghz. The first time I attempted it was working just fine, then during the setup while i was entering region info the window went away and the computer shut off. I restarted it then retried the installation and got the error message "Medium does not contain live file system". I found a different type of cd and attempted to reinstall again. Now the error message says that it could not mount the cd probably because the cd is not in the drive.

View 1 Replies View Related

Ubuntu :: Unable To Install Anything From Terminal Or Synaptic Get Error Message

Jan 17, 2010

Any time i try to install anything from terminal or synaptic i get this error message saying:

Or if i try to upgrade:

If i try to open the software-center the cursor changes but it does not open. This all started when it upgraded to Karmic Koala. There might be two seperate issues but i cannot install or uninstall at all.

View 2 Replies View Related

Ubuntu :: Unable To Install Initramfs-tools Error In Karmic

Jan 22, 2010

unable to install initramfs-tools error in Karmic I'm having a devilish time installing Karmic on my AMD 64-bit.

Today's missive is:
"Unable to install initramfs-tools."
"Check /var/log/syslog"

After a trying to fix a corrupted 9.04, I have attempted repeated installs of 9.10 on a completely reformatted clean drive. I can get the live CD working, but when I try the permanent install, using the guided full drive install, it stopped at "Unable to install initramfs-tools." and halts the base system install. I can't find anything on this for Karmic and Launchpad says it was superseded.

Can I skip this and go on? It showed a install list going forward, but if I can't put in the base system, how do I proceed? I've burned 2 9.10 disks, a new 9.04 disk, downloaded 9.10 via package manager while in Live CD and get errors on all during the install process. the check sums match on D/L, but I can't figure how to do a chksum after it's burned to disk. The file sizes do match, but when I go for the install something always halts it at different steps with different errors. No joy.

View 2 Replies View Related

General :: Unable To Install Due To C Compiler Error

Mar 3, 2010

Have just installed Red Hat on my HP machine (previously running Windows). Thereafter I've been struggling to install various software like flash, media player etc.While most have been successful with much help from this forum, am stuck with the installation of xine media player. also my 320GB external HDD (in NTFS format) is not being read by the system. I downloaded some ntfs drivers but am getting the same C compiler error.

View 2 Replies View Related

Slackware :: Unable To Identify Tty Name Error On New Install

Oct 4, 2010

Just installed slackware 13.0 32bits using the usb-based netinstall. Did a minimal cli install and unchecked bash (since I wanted to use tcsh on this particular OS). But now on first boot it tells me that it shows an error message indicating "unable to identify tty name" and won't let me login (I'm using the root account since I haven't yet set up additional users). My question is, is the error happening because I unselected bash during installation? If so, is there any config file that I can modify to get it to recognize tcsh and let me log in? or if that isn't the problem, where do I set then the tty name?

View 4 Replies View Related

Installation :: Grub 17 Error - Unable To Install Xubuntu ?

Feb 19, 2010

I made an xubuntu disk.loaded it and rewrote my hardrive.on a pretty old averatec laptop. 3/4 of the install it gives a a io error and stops the install.I tried to reinstall from the screen again but got the same error.So I rebooted and it skips everything and goes straight to a grub loading stage 1.5, grub loading error 17. It even skips the live cd.I also tried to do it thru a usb stick but that gets ignored too.

View 3 Replies View Related

Red Hat :: Unable To Install RHEL5 On Pc. Page Load Error

Mar 1, 2010

Not able to install RHEL5 on my pc, I frequently get the page load error 0x30/0x40

View 3 Replies View Related

Debian Installation :: Unable To Install In HP DV7 Laptop (ACPI Error)

Jan 30, 2011

I have tried both DVD and CD (both are MD5-checked) of both Lenny 5.0.8 and Squeeze RC on my HP DV7-3074CA. (a.k.a 3085DX)When I choose a graphic install, it just hangs after loading the initial files.When I choose the normal install, It gives the following error:

[1.383207] ACPI: EC: Input buffer is not empty, aborting transaction.

Is there a boot command I can input to override this? I tried removing the battery slot, but the only difference is that that message does not appear, but the setup hangs anyway.

UPDATING:Tried "pci=noacpi" but that did lead to a kernel panic.[1.547564] Kernel panic - not syncing: Attempted to kill init!

View 7 Replies View Related

OpenSUSE Install :: Unable To Boot Into The OS - Error 25 GRUB Stage 1.5 ?

Jul 31, 2009

A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.

I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.

I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.

Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).

My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5

I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).

View 9 Replies View Related

OpenSUSE Install :: 11.4 - Unable To Partition Disk (Error 1007)

Mar 13, 2011

HP 6930 laptop
It had Win7 64bit installed across the whole drive (100MB sys reserved and C: taking up the rest), I was successfully able to shrink the C: partition to 60GB. So I know have a working copy of Windows 7 on 60GB with 60GB or free space. I boot to 11.4, the installer works great so far and is real fast, I get to the spot where I choose my partitions for nix(tried both auto and manual) then I click OK at the warning to start writing to the disk and ....error 1007, the installer is unable to create the partitions.

View 5 Replies View Related

Ubuntu Networking :: Install NIC Wired RC-400 - Error Comes Out - Unable To Access The Internet Or Ping Any IP Address?

May 5, 2010

we are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out

make -C src/ clean
make[1]: Entering directory `/home/trinity/Desktop/r8169-6.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset[code]...

So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address

xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux

View 9 Replies View Related

Ubuntu Installation :: Unable To Install Inside Windows XP - An Error Occurred: Permission Denied

Apr 3, 2011

I'm trying to install 10.10 but it keeps throwing an error. I'll include the error and log file below:

An error occurred: Permission Denied For more information, see the log file: c:...

View 8 Replies View Related

OpenSUSE Install :: Unable To Login To Sled 10.1 After Power Outage - Error In Module

Aug 16, 2010

Our Sled 10.1 server is running as a VM on VSpher 4. After a power outage we can not log into the server we get the Error in Module message. I can however disable the nic card for the server in the vm console and the system logs in with no problem.

View 2 Replies View Related

OpenSUSE Install :: Unable To Upgrade To 11.4: Can't Resolve Host / Error Code: Connection Failed?

Apr 1, 2011

I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):

Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'

With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!

Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).

View 9 Replies View Related

Ubuntu :: Installing The Dansguardian Webmin Module?

May 13, 2010

I have installed squid and Dansguardian on Ubuntu Server 10.04. I have also installed webmin. I see that there is a Dansguardian module for Webmin, and I have downloaded it to the server, but I am not sure how to install it. The file was downloaded from [URL]I don't know what to do with the .wbm file.

View 1 Replies View Related

Ubuntu Security :: Cannot Add Site To Exceptionsitelist Dansguardian?

Jan 30, 2011

I am trying to add any web site into the exceptionsitelist for dansguardian, but I get cannot edit the exceptionsitelist file located at:/etc/dansguardian/listsSo, I tried to chmod 777 exceptionsitelist I was told that:chmod:ging permissions of 'exceptionsitelist': Operation not permittedAm I trying to add a site as a whitelisted site the correct way?If not, how do I do this?Please provide details on if this is done in a gui? ( I don't have a gui or know where it is located at least )What is the gui called?Where is it located ( under which mean like administration or preferences etc. )If there is no gui, am I looking in the correct folder for trying to add a web site for whitelist?Am I trying to whitelist correctly by adding a web site to the exceptionsitelist folder?I want to bypass everything dansguardian does. I read about greylist. I do not want to do that

View 3 Replies View Related

General :: Ban A Certain Site To A Certain IP In Dansguardian?

Nov 25, 2010

I will just ask on how will I ban a certain site to a certain IP address on the network? I am using Dansguardian Web filter.

View 1 Replies View Related

Server :: Dansguardian Through Webmin?

Jun 2, 2011

linux i have configured squid with dansguardian but not able to block the sites and url.. i am accessing dansgaurdian through webmin.. please help me out in the above (with screen shots)

View 2 Replies View Related

Software :: Looking For GUI Tool For Dansguardian?

Apr 20, 2010

I was wondering if there's a GUI tool for dansguardian.

View 1 Replies View Related

Ubuntu Security :: Using Dansguardian -> Privoxy -> Polipo Cannot Work

Aug 22, 2010

Currently i am using the tutorial from Bodhi to setup Dansguardian to work togather with Privoxy and it worked fine.Then i installed Polipo to work with Privoxy which work as intented with additional forward the port to Privoxy.


Is it possible to run Polipo together with Privoxy? Yes. In order to get the privacy enhancements of Privoxy and much (but not all) of the performance of Polipo, you should put Polipo upstream of Privoxy.

In other words, you should:

point your web browser at Privoxy (localhost:8118);
point Privoxy at Polipo (put forward / localhost:8123 in the Privoxy config file);
use no parent proxy in Polipo.

Now i tried to use Dansguardian togather with Privoxy and Dansguardian with the same configuration but fail.

View 6 Replies View Related

Ubuntu :: Dansguardian And Block Secure (https://www...) Websites

Nov 1, 2010

I have installed Dansguardian on my little brothers laptop (using Tinyproxy and Firehol too) and I have it mostly configured the way I like it. The only problem now is that I can't seem to block secure (https://www...) websites, and he knows a few proxies that use secure domains. I was wondering if anyone has been able to make Dansguardian block these websites or is it just not doable?

View 1 Replies View Related

Ubuntu Security :: Cannot Access Forum After Installing Dansguardian

Nov 27, 2010

I have just installed webcontent control following these instructions - [URL] It has blocked the content that I wanted blocking but also when I try to access the ubuntuforum site, all I get it a white screen.what I need to adjust in the configuration so that I can access the forum with content control enabled.

View 9 Replies View Related

Ubuntu Servers :: Dansguardian + Squid + Webmin = Not Working

Mar 22, 2011

I have a proxy server (squid-3) that I would like to setup Dansguardian to do additional web filtering.

The system:

Ubuntu 10.10 - all updates as of today
Dansguardian - (latest update)
Squid3 - latest update (not squid 2.7)
Webmin - 1.530 (all updates)
Webmin dansguardian module - 0.7.1

Ok - I have all of the above installed. When I go to the DG module page in Webmin, I get the following:

Warning - the version of DansGuardian you have is not supported by this Webmin module version
Webmin Module Version 0.7.1 supports DG version 2.10 (& 2.9)
Currently installed DG version

This obviously makes no sense, since I am running DG version 2.10.1...

PS. I have squid installed, but not configured (still tinkering) - could this be the problem? That squid needs to be running for DG to work?

View 2 Replies View Related

OpenSUSE :: Configuring The Dansguardian + Squid?

Mar 1, 2010

I have installed dansguardian and squid on my home computer and I need to configure them. the only problem I couldn't find any manual only one for opensuse 9. And even there the part after "acl CONNECT method CONNECT" doesn't make any sense to me.

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved