I have a Sony Vaio VGN-FZ340E. I installed Ubuntu about 6 months ago and had a problem-free time with it. I then got busy with other stuff (house work, etc.) and hadn't worked on Ubuntu for about a month. Now I switch on my Vaio with Ubuntu and I find the screen is just too bright.Since 10.04 was just coming up, I thought this would be fixed when I update. I updated, but the screen is still too bright.
I searched the forum for answers and found only some pretty old threads which were about the Fn key combos (which, obviously, doesn't work), spicctrl, etc.So I followed the instructions here. I did just what Step 1: Checking for Module says, but Terminal just doesn't give any output.
When I try to install Ubuntu or (having installed using Wubi) boot Ubuntu, I get a blank screen and no activity. This problem has been addressed many times but I haven't been able to get any of the proposed solutions (e.g. nomodeset, i8042.nopnp) to work. Is there another Linux or Unix-like OS that is known to work with this hardware?
Sony Vaio Y (VPCY) NameIntel(R) HD Graphics PNP Device IDPCIVEN_8086&DEV_0046&SUBSYS_9076104D&REV_023&115 83659&0&10 Adapter TypeIntel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter DescriptionIntel(R) HD Graphics
I have a sony vaio laptop(model-VPCCW27FX) 64 bit.I am currently using windows 7 os. I tried installing ubuntu using wubi and also by making a bootable disc. The installation proceeds well. When I restart my laptop, it asks whether to start windows or ubuntu.But, when I select ubuntu, the screen goes blank.
I recently installed Ubuntu 10.04.1 (64-bit) on my Sony VAIO VGN-NW350F and every few minutes a 1-inch strech of multi-color quickly flickers on the screen. It almost looks like a bad hardware connection but I do not have this problem when running Windows. I am currently running at 1366 x 768 at 60 Hz.
I've been trying to install Ubuntu 64bit on Sony Vaio CW and the Screen is 14 inch when I boot from CD it seems to work normal but after i select "Try Ubuntu without installing" or "Install Ubuntu" then the screen goes black like nothing happening but the CD runs for while then stop. Again I reboot to try again this time I press F6 then select "nomodeset" and it boots fine I was happy though, after installation success when I boot again WTF it goes black again and then I reboot and press "E" during the options that showing to select OS then I remove "Quit Splash".
I guess then I add "nomodeset" and control+X to boot, it works fine. So when I log in and of course I activate the Nvidia Graphic Driver then I reboot and WTF again the screen was out sync or something like the the screen didn't show properly. The Application menu normally is on the upper left of the screen but this time it was on the center of screen and the Shut down button came to the left side and i have to move the mouse cursor to the right and then it would appear on the left just like the resolution is to big for the screen.
I just got a new Sony laptop running the I7 Q740m Quadcore with 4m ram w/ WIN 7 Home. I want to run Ubuntu in a Virtual machine. I am wondering if Virtual box is a good choice, or what other VM I should use? Also which version of Ubuntu, 10.10 64bit or 32bit? Would an older OS be more stable?
I just installed Ubuntu on my Sony Vaio VPCEB23FM. However, when I tried to watch videos, there was no sound coming out. I went to [URL] and tried out the link in post #5, but that completely got rid of my sound card and I no longer have any version of ALSA.
I am having problems with the brightness control on my sony vaio laptop, at virst when i upgraded the driver for the VGA card the whole screen went blank, I had to port a bin file from windows and write my own EDID file to get it to work (nVidia GT 230M), but I am having problems with the brightness, although ubuntu does read the input from the keys (FN+...), the brightness refuses to change, adding the brightness applet to the taskbar does not work either. I really need to be able to change my brightness because the battery usage is off the charts.
Cant install it or event boot it to try, because when i choose to install or test it the scene goes blank. I had the same problem when I had the older version but solved it whit using the custom eidi or whats is called and changing xorg.conf. But I saw that nvidia had posted the drivers for GeForce gt 330m on its site for 32 and 64 bit Linux drivers so i wanted to try the newest ubuntu. The thing is that i cant event install it or anything, so i cant use the eidi method either.
i'm trying to install ubuntu on a sony vaio. Unfortunately i cannot boot from a cd on which i have burnt the .iso file of ubuntu. The only way i managed to install ubuntu was by creating a usb bootable stick, but here also that doesn't work so well. My workaround was to use virtual clone drive which is freeware to simulate a cd rom in windows and get the iso file started. By leaving the bootable usb stick in the computer in this way it worked...
So in the end i have grub and can load ubuntu and win xp, but then by trying to format the harddrive i kind of messed things up and had to reinstall windows. Because the DVD drive only reads original cds. So from there i will attemp to reinstall ubuntu again. But how can i get rid of win xp afterwards ? If that CD Rom would only read burnt cds or if it would habe been possible to boot from usb then i wouldn't have this trouble.
I am having a problem with my new laptop Sony VPCEA1S1E. I installed Ubuntu 10.04 LTS and since then I cannot hear any sound. I have tried a lot of things before posting in here but nothing seems to work. From changing the module value in the alsa=base.conf file to installing the updated alsa drivers (drivers,utils,base}. I have also checked the alsamixer so that nothing is muted. I am struggling with this problem two days now and it does not look like I am getting somewhere. The various postings I have read so far did not work for my case.
A few things which might be useful at first: card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 ..... Advanced Linux Sound Architecture Driver Version 1.0.23. Compiled on Oct 5 2010 for kernel 2.6.32-24-generic (SMP).
I'm having trouble with 802.11n as of late in Ubuntu. I know my wife's computer used to connect faster but it seems to not be able to go over 54 Mbit in 10.10 any more either. Laptop is a stock Sony Vaio VPCZ12CGX/x which has an Intel Advanced-N 6200 card.
I can connect to the 2.4Ghz channel or the 5Ghz channel on my wap both are capable of up to 300Mps as per its configuration but neither go over 54Mbit. Both do about 160Mbit from this same location in Windows. Moving closer makes no difference.
On my Sony Vaio VPCF12M1E I have a small but irritating problem: Since yesterday the numeric pad on my keyboard doesn't work anymore. I can use the numbers at the top, but not on my numpad. This happened out of nowhere when I was just setting up an access point. No idea what I did wrong, cause I only configured a static IP Reboot, and numpad was gone. I tried restarting the laptop, I tried disabling and enabling Numlock over and over again. Nothing works.
My wireless connects and then in a few seconds disconnects and then again connects..... and so on. And even it seems to be connected I cannot reach any website. Could you please help me?
Below there are some information probably needed
1 ) Machine Brand and Model (PC/Laptop): Sony vaio VPCM13M1E (Netbook)
2 ) Wireless Brand, Model and Wireless Chipset: (I believe it should be one of these)01:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe 02:00.5 Ethernet controller: JMicron Technology Corp. JMC260 PCI Express Fast Ethernet Controller (rev 02)
3 ) check interface:
a) ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 90:fb:a6:fe:ce:3d
My problem is that my sony vaio E-series (VPCEA36FA intel i5-560 4gb ram). The battery should stay at least 4 or 5 hours as i checked in windows platform but on ubuntu 10.10 it stayed only 3 hours now on 11.04 it stays only 2 hours !!! which really pisses me off, so is there any things i should know?? also the fan sometimes get so high i feel that the processor works on highest performance although am not using it that much.
I would like to install the new Ubuntu 11.04 64bit. I first booted from usb to see how the new release behaves on my laptop(sony vaio eb3m1e). The thing that does not work as it should is that the OS can't detect the GPU which is an ATI radeon 5650, when i click the additional drivers icon in order to install the proprietary drivers I only see the "no proprietary drivers are in use on this system". How can I make the OS detect the GPU?
After testing out Ubuntu on a live CD I decided that I would install it on an external hard drive. After installing it on the external hard drive I rebooted the system but it booted into windows instead of Ubuntu. I would really like to know how to change the boot order on my Sony Vaio laptop. I tried f1 and f2 but I see no option for anything along the lines of boot order.
i have disturbing "zzzzzzzz" sound whenever i attempt to reach a file or folder, and it lasts for ten seconds after opening it. It is terribly disturbing and i haven't found any solution for it.i have also windows 7 installed on my laptop. But i do not have any noise issue when using it.i think it all started after shrinking volume to be able to install ubuntu. at first windows did not let me shrink volume bigger than 200 mb. After that, i used recuva disk software to consolidate free space. Finally i was able to shrink.is it a faulty hard drive or a software issue?
I successfully before install Ubuntu on my last laptop along with windows vista and it was rather easy because ubuntu allowed me to partition the disk so simply. However, on my vaio, my whole hard disk is partition and there is no unallocated space. It will not allow me to partition the disk and when I boot up the ubuntu live cd to install, the partitioner doesn't look the same and I'm hesitant to make any changes because I'm afraid I'm going to damage my data. I have a 500GB HDD in which I want to use just 60GB for Ubuntu and the rest for Windows 7. Also, I'm running 64-bit Windows if that matters at all.
Just bought one of these - [URL]. Installed 9.10 64bit, install went smoothly, but now having a few problems with graphics card drivers and sound. The system has a ATI Mobility Radeon HD 5470 Graphics so I guess it's too new for a driver?
I have finally got both video drivers working. Is it me or is the quality of the Intel drivers almost better than the nvidia? I will try something with hardware acceleration soon but the 2D (compiz etc) all works really well.
I installed Ubuntu 220.127.116.11-14-generic and I'm having trouble (like many before me) getting my wireless configured. The first problem was that my Network controller said it was UNCLAIMED as described in the 9.1 Wireless Troubleshooting help.
As recommended there, I downloaded nsdigtk and started browsing the interwebs for the correct .INF wireless Atheros driver file for my hardware.
I've been downloading different Atheros versions and installing them using Windows Wireless Drivers manager with varying results -- none of which have solved the problem. The Atheros versions for my hardware produced a "Can't detect if hardware is present" error. I read somewhere that you should be using Windows XP drivers anyway. I tried that and the Windows Wireless Drivers manager hung on install. But at least this last try made my UNCLAIMED disappear (see output below).
I installed Ubuntu 10.04 on my new Sony Vaio series S but it does not recognize my wireless card (I think). The button is on, but the light does not turn on, and it does not detect the wireless card. The wireless card, an Intel Centrino Advanced -n 6205, does work in ubuntu and when I run the command: lshw -C network, it appears UNCLAIMED, that I think it means the drivers are not in the Ubuntu libraries. What can I do to make it work? I've been struggling but I cannot make it work.