Ubuntu Servers :: Https Setup With Apache2?

Sep 15, 2010

I have a site called http:[url]....configured in apache virtual hosting.Is it possible to make it use https like the below https:[url]....

View 1 Replies


Fedora Servers :: Good Guide To Enabling Https On Apache2?

Dec 28, 2009

I've got a basic apache2 setup running w/ multiple virtual hosts, would like to try SSL (i.e. https).

I've got the IP networking side well and truly sorted but I need guidance on the apache/ssl config side. I have installed mod_ssl.

Does anyone have a good guide for Fedora that's recent? All I can find are ubuntu and old fedora 'core' guides, so not sure how much applies to F12. The best ones I can find so far is



View 7 Replies View Related

Ubuntu Servers :: Setup Ajaxterm Without Https?

Aug 19, 2011

how to setup ajaxterm without https. i want to use it as [URL]

View 1 Replies View Related

Ubuntu Servers :: Permission Denied Error 13 On Apache2 Setup

May 8, 2010

I wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:

<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
AllowOverride None
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny

You don't have permission to access /po/ on this server.
So I go to the logfile; which says this:
[Sat May 08 16:43:51 2010] [error] [client] (13)Permission denied: access to /po/ denied

I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.

View 6 Replies View Related

Ubuntu Servers :: Setup And Run Monit To Monitor An Apache2 Webserver?

Nov 11, 2010

I'm trying to set up and run Monit to monitor an Apache2 webserver, I want to be able to ensure Apache is running and if it's not have it restarted with an email alert sent out.

The monitrc (edited for relevance) looks like:

check system *server name*
if loadavg (1min) > 4 then alert
if loadavg (5min) > 2 then alert


View 8 Replies View Related

Ubuntu Servers :: HTTPS Forced Non Https:// Protocols?

May 22, 2011

I have set up certain portions of my web site to be forced https:// How do I force, non https:// protocols. I know this sounds confusing, so let me give you an example.


View 7 Replies View Related

Ubuntu :: Https Configuration On Apache2 10.04?

Dec 27, 2010

I have configure https for my local intranet on ubuntu.

I have followed following documentation.


I am using Self-Signed Certificate.

I have 10 folders inside http://"myipaddress" location.I want to activate/access https:// for specific folder (https://myipaddress/myfolder).

here https getting activated for whole apache2 server.How can i activate it for specific folder.

View 1 Replies View Related

Security :: Errors In HTTPS Setup

Aug 17, 2010

I have just installed SSL certificate for my private domain (it runs on a private ip in a local network). I got the trial SSL from thawte. I have successfully installed the certificate.

View 1 Replies View Related

Ubuntu :: Can Not Log Into Servers - Use A Https With Firefox ?

May 11, 2011

I can not log into our servers at work, Citrix, so; How do we use a https with Firefox?

I have Citrix Receiver installed, but one of the IT guys from work said to un-install it! How do I do that? and then they want me to load Cag from the web site...how do I do that?

Yesterday I put Win7 back on my pc at home - damn shame - and I was able to log into work through Internet Explorer, by putting the website in the trusted zone.

Am I supposed to do something similar with Firefox?

I found this on the net, and have done what it says...

Select a setup option:

1. Install Citrix Receiver for Linux 11.100
2. Remove Citrix Receiver for Linux 11.100
3. Quit Citrix Receiver for Linux 11.100 setup

Enter option number 1-3 [1]: 2

Please enter the directory containing the Citrix Receiver for Linux installation [default /usr/lib/ICAClient] or type "quit" to return to the menu:

The file is in fact the default, but I can't get the string to work!

View 1 Replies View Related

Ubuntu :: Apache2 SSL Setup - Secure Connection Failed

Mar 23, 2010

I followed the tutorial found here [URL] but when I try to access [URL] I get the following:
Secure Connection Failed
An error occurred during a connection to www.mydomain.com.
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)
Not sure what I might have done wrong... I have retraced all of my steps and I don't believe I missed anything.

View 2 Replies View Related

Ubuntu Servers :: Https:// Leads To Another Site On My Server

Jul 12, 2010

A while back, I put a site up under a LAMP setup, and followed a guide from ubuntuforums that I googled to set up SSL encryption for the site.

That site works great, but since then, I've added some other sites to the same LAMP server. They load fine as well, but if I type in https:// before going to the latter sites, the browser attempts to redirect to the first, and warns that it is a fraudulent certificate, and that I'm at risk by going to the site.

Obviously, it isn't an attack site, the certificate is just set up for only one domain. How do I prevent my non-SSL sites from redirecting to the SSL-encrypted site?

View 6 Replies View Related

Ubuntu Servers :: HTTPS - Cannot Accept Certificate Permanently

Oct 1, 2010

A few days ago I installed a new SVN server using ubuntu 10.04 server editiopn at our company and it runs almost flawlessly. Almost that is. The server uses a self-signed certificate so all communications go over https. The strange thing is this. When I run some svn command from my (windows) pc, like update I get asked whether or not I want to accept the certificate. Then I choose "accept permanently" end all goes well. In future command I don't get that question anymore. But when my colleague does the same from his pc, he also gets the same question. Now, when he chooses "accept temporary", all goes smooth. But when he chooses "accept permanently", like I did, he gets an error saying:

RA layer request failed
svn: OPTIONS of 'https://path_to_some_repo': Could not read status line: An established connection was aborted by the software in your host machine.

Of course I googled on this and could find two things: Server settings are wrong
there's something wrong with the firmware of the router. The first couldn't almost be the case since it works for me and I followed the manuals. The second one couldn't be it either because when I log in with my account on my colleague's pc, it works. This is also the case when he logs on to my pc. So the problem exists specifically when he is logged in on his own pc. The setup of this machine is exactly the same as mine.

View 1 Replies View Related

Ubuntu Servers :: Apache Virtual Hosting On HTTPS?

Apr 11, 2011

I am trying to get name based virtual hosts all running on HTTPS (port 443) so I can run multiple sites on the one IP.

The DocumentRoot needs to be different for each host.


However, I am unable to find where to actually enable these hosts in the configs. The apache website says to put it in httpd.conf however that file is empty on my machine.

The existing default virtual hosts are in "/etc/apache2/sites-available/default" and "default-ssl"

The main config file is /etc/apache2/apache2.conf

I am running version 2.2.16 of apache

I need to use the same .htpasswd file for all the sites.

I have configured CNAMES on my domain for all of these hosts.

View 4 Replies View Related

OpenSUSE Network :: 10.3 - Hosting ASP Website (Apache2 Setup)

Feb 8, 2011

I'm completely new to this whole hosting on linux thing. I'm using apache2 and have everything setup as if I was doing it on a windows machine but when I navigate to the site via URL it displays the source code as plan text and thats all I see. I'm running openSuse 10.3.

View 9 Replies View Related

Ubuntu Servers :: Couldn't Use Https To Browse LDAP - Could Not Start TLS

Feb 8, 2010

After setup Openldap server with TLS/SSL use ldaps, I install phpldapadmin and have an issue LDAP Server is configured and running. make some ldapsearch and it oki. I couldn't use https to browse LDAP server when I use http and I can't connect Could not start TLS. check your LDAP server configuration. This is my config


View 2 Replies View Related

Ubuntu Servers :: Multiple Virtual Hosts, Http And Https?

Sep 15, 2010

What is the best way to go about setting up multiple virtual hosts on the same box, one using http and one using https/ssl? I'd like to serve them from the same ip address if possible; I know it's possible in apache 1.3.

View 2 Replies View Related

Ubuntu Servers :: Blocking Https Site With Squid On Webmin ?

Dec 8, 2010

I blocked facebook and ..... but if any one change the http with https its open with him how can i mange https like http.

View 9 Replies View Related

Server :: Setup Apache2 To Drop A Core File When It Crashes?

Jun 1, 2010

I'm trying to setup apache2 to drop a core file when it crashes. I know that you need to set the CoreDumpDirectory directive in /etc/apache2/apache2.conf and run "ulimit -c unlimited" from the command line (and restart apache after the ulimit command). But, on a reboot, even though the output of "ulimit -a" shows unlimited, apache2 will not create a core dump file unliess you set ulimit -c unlimited again and restart apache2. There must be a way to configure apache2.conf or something so that ulimit -c unlimited is set prior to apache2 starting, no?

View 2 Replies View Related

Fedora Servers :: Excluding Images Pdfs Etc From Https Routi

Nov 1, 2009

I am a squat on advanced Apache work. I would get a basic SSL functionality to work. So URL...works fine and gets me all the login windows I designed. however currently all the images and other extensions like .pdf are also using the https routing.some image referred on that https link e.g. URL...can be displayed using https but not http.I would like to JUST limit https usage to the login window html and ALL other images pdf's not secured html ( one that do not need password ) should use HTTP NOT HTTPS.

View 6 Replies View Related

Debian :: Setup A Squeeze Server For A Friend Of Mine Using Exact Apache2 Settings?

May 31, 2010

I just set up a Squeeze server for a friend of mine using my exact apache2 settings. He has been playing around, having a bit of fun learning HTML, but he ran into a problem where one of his images would not display. I at first figured his HTML was incorrect, but after a very long time of trying to figure out the problem, I still do not know what is going on, so I think it must be an apache2 problem?[URL]..

View 14 Replies View Related

Fedora Servers :: Apache - Can't Acces Http Remotely But Https Works

Jan 17, 2010

I have 2 web server in my office : http and https. You will find attached the httpd.conf and ssl.conf. I can acces the https server from home, but not the http one.

What I did :
configure the router to forward port 80 to my fedora 11 machine
open port 80 with system-config-network
created a virtualhost

The same exact steps have been done for port 443

I can access both server locally but only the https server remotelly.

Here are my iptables :


you can try to acces my servers using [url]

I made httpd to listen to port 8080, and done all the port forwarding/opening stuf, and it works. so is it a bug ?

Finally found my error seams like turning off UseCanonicalName to off did the trick

I really think it's a bug now. It was definitively working last week, I just added content to the main host of my website, and now i can't acces it from port 80. If someone think it's not a bug or find someting missing/wrong in my conf file.

View 2 Replies View Related

Ubuntu Servers :: Take Apache2 Away From Root?

Feb 4, 2010

I think my apache2 is owned and running as root. I don't know if I installed it like a noob a while ago but I would like to secure it now especially since I just figured out how setup virtual hosts and I may want to eventually let people host sites on my server and I obviously don't want to have to give them root access. How can I confirm that apache2 is running as root and how do I take it away from the root user?

View 6 Replies View Related

Ubuntu Servers :: Apache2 - 98 - Address Already In Use

Aug 29, 2010

I am using Ubuntu Server 10.04 64bit. I am getting an Apache2 start up error after I setup my certificates and configure Apache2 for HTTPS. At the point on start up where I need to type in my certificate pass code I get a lockup due to the Apache2 process being in a hung state. I reboot if needed and switch to console tty2. When I type in the command.


I get the following error.


To correct the problem I do this.


From the output of the command above I look for the apache2 process and make note of its process ID. Then, I kill that process ID. For example, the command below has an apache2 process ID of 1131.


Next, when I run this command.


The apache2 server starts up and asks for my certificate password, accepts it when I type it in, and runs perfectly fine afterward.

Fortunately this instance of Ubuntu Server is running inside a VMWare virtual machine. I can just "pause" the virtual machine if I need to rather than going through this crude and tedious start up process too frequently.

Crude and tedious are feelings I'm having too frequently lately with Ubuntu Server.

View 5 Replies View Related

Ubuntu Servers :: Apache2: Php Not Parsing

Oct 18, 2010

I've reinstalled my system and installed apache. I've installed php5. 'a2enmod php5' returns with a message telling me that php5 is already enabled.

However, this code does not parse:

phpinfo() ;

I get a blank page. When I view the source code for the page, I see the php code.

How do I get php to work?

View 3 Replies View Related

Ubuntu Servers :: Setting Up Apache2 With SSI The *right* Way?

Jan 5, 2011

So I've got a box running 10.04LTS Server, and on it is running the latest build of Apache2.It's a home box - a server set up for the sole purpose of experimenting and having fun with. So far, the fun is mostly breaking it over SSH and then fixing it when I get home and can log into it via recovery.What I really want to do is to get this box set up with Apache2 the way it seems like it was designed - with Apache2 serving web pages from its default file location (/var/www) but also being able to log in and upload/download new web page files to that directory over SCP or SFTP. I keep hitting snags.Here's what I've done so far:

1. The server is set up in a DMZ at home and my router updates a Dynamic DNS record; so far I can SSH into it no problem.

2. Apache is working. I get my "it works!" page when I enter either the IP or the dyndns domain name.

3. SFTP is sort of working. I can log on using WinSCP and see the files and download them, but I can't upload to the default directory with my normal login.

Here's my issues: 1. I want to set up Apache *correctly*. To me, that means leaving it pointing to the default directory, but still being able to upload to that directory. I have not (and probably will not) enable the root account. I've set the permissions to 755. I've tried chown'ing the directory, but then it seems I can't view the webpages.As a workaround, I created a www folder in my default user home directory and pointed Apache2 there in the 'default' file in /etc/apache2/sites-available. The changes read as follows:

DocumentRoot /home/username/www
<Directory />
Options FollowSymLinks[code]...

That gives me a workaround for the default directory SFTP issue, but I would rather learn what I need to do to have it set up and working with default values.

2. You may notice I added Includes under the Options. My goal is to get server-side includes working. But they aren't. I have some existing webpages my work has set up - I using these as a template to use to adapt a flash movie I made to a specific resolution, as well as to learn how to optimize my flash for a webpage. Our webhost uses virtual hosting; I am not yet doing so. I'm not sure what they've done to set up the server-side includes, but the files they are using are all html files - no shtml. The include files themselves have either .htm or .html extensions. All of the pages have .html extensions.

My reading said that I need mod_include installed in Apache2. Where can I check to see that it is installed? Where do I need to add the Includes under Options?Is it in the right place? And finally, where do I need to add XBitHack on to enable it? This is the method that Apache suggests, but the documentation offers no clue as to where to put it. Most of the documentation out there refers to apache.conf, but that's the Apache 1.3 way of doing things.I really just want this to be set up according to the defaults as much as possible.I want to have a good working knowledge of Apache and of how to set it up and configure it, but dang it if it isn't a frustrating process.

View 8 Replies View Related

Ubuntu Servers :: Removed Apache2 But It's Still There?

Mar 8, 2011

I'm very baffled by this, I was setting up my mumble server since my old one had a hard disk failure. I was messing around with web registration but decided I didn't want it since this server is really only for a few friends.

So I removed all the mumble-django and apache2 packages required for web registration, but for some reason apache2 is still on my system and listening for connections.

terminal output below to further clarify.

Linux voiceserv 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:29 UTC 2011 i686 GNU/Linux
Ubuntu 10.10
Welcome to Ubuntu!


View 3 Replies View Related

Ubuntu Servers :: Apache2 Not Accessible From LAN

Apr 1, 2011

I have a problem with apache server. The thing is - I can connect to my server on localhost, but when I try to connect from local network, it doesn't reply.

I can ping my web server from lan. I can ssh my web server from lan.

I haven't modified iptables since install except these commands>

iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d $MY_SERVER_IP --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A OUTPUT -p tcp -s $MY_SERVER_IP --sport 80 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT


View 1 Replies View Related

Ubuntu Servers :: Cant Uninstall Apache2?

Apr 9, 2011

So i want to remove Apache2 so i can compile my own edited version. But when i do it says that it cant remove it. here is a 'log':

geisst@ubuntu:~$ sudo apt-get purge apache2
Reading package lists... Done


View 5 Replies View Related

Ubuntu Servers :: Apache2 Fails To Start ?

Jan 17, 2010

How to resolve this apache2 problem I keep getting, I have installed a debian LAMP server with ispconfig3 and everytime I reboot apache fails to start, I don't know and I have done some research but nothing seems to work, which leads me to reinstall everything from scratch again, I think I have reinstalled at least 10x or more.

When ever I reboot I get the following error


View 9 Replies View Related

Ubuntu Servers :: Perl .pl, Cgi-bin Apache2 Configuration On 9.10?

Jan 18, 2010

Very new to Ubuntu (linux) in general and read various forum and threads to get .pl file to run on a new Ubuntu 9.10.My cgi-bin is in /var/www/site/cgi-bin. The server will run 2 websites site1 and site 2. Site2 is html only and site1 has some cgi and pl files. Everytime i get to the cgi-bin/other_director the browser tries download the file or even if going directly to index.pl. Please find attached my site-available for both default and site1 for your consideration. I also ran a2ensite site1 and a2ensite site2, the reloaded the apache2 serverQuote:

<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www


View 2 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved