Ubuntu Servers :: Jump Start A Server's Networking?

May 1, 2010

My desktop server serves up files via a number of protocols and I connect to it via SSH and Avahi. Today I tried connecting to it via SSH, but it timed out. I was able to ping it, and a port scan reveals all the ports I have open on the network. THe problem is that I can't connect via SSH, HTTP, AFP, SMB or any other protocol I have established.Is there a way to jump start a system in a situation like mine? I have a 6 month uptime going, but I'm taking it down soon for some hardware upgrades, so a hard restart is not out of the question, but I'd rather not. I also reset the router without a solution.

View 5 Replies


Server :: Trying To Build A Ssh Jumpbox - Allow To Jump To A Private Ip Scheme

Jun 12, 2010

i am trying to build a server that will allow us to jump to a private ip scheme. GB1 65.20.x.x gb2 1.1.x.x if i ssh to the 65.24 ip and configure gb2 i lose access to the server completely. am i missing a route somewhere? BTW this is ubuntu server 10.04

View 5 Replies View Related

Ubuntu Servers :: X Server Can't Start On Kubuntu 10.04

Jul 22, 2010

I just installed Kubuntu (10.04), did some upgrades and updates then upon booting the computer wont go beyond the login page. at first it posted a message (Xsession:warning: unabele to write to /tmp; X session may exit with an error).I followed some instructions from the net which asked that I do the following:

aptitude clean of apt-get clean
cd /var/log


after this, when I login it no more goes off, but the desktop wont still come on, instead a terminal (konsole) window is open but when I try start x it refuses.(the only method I use to start my computer successfully is though the recovery mode)

View 1 Replies View Related

Ubuntu Servers :: Apache Server Don't Want To Start By Itself On Boot

Apr 6, 2010

My apache server don't want to start by itself on boot.

View 9 Replies View Related

Ubuntu Servers :: Server 10.04 Does Not Start Init.d Scripts?

May 17, 2010

I have two ubuntu servers. I have upgraded them to 10.04. Now I have serious problems at startup: iscsitarget and heartbeat scripts do not start all the times I reboot.I have installed monit to try to start iscsitarget and heartbeat and guess what? It does not start too at boot.In one of the two server sometimes it also starts with ethernet cards swapped.

View 2 Replies View Related

Ubuntu Servers :: VMWare Server Does Not Start After Reboot

Nov 30, 2010

Ok so I followed the instructions here [url] and this works great for the install however if the machine is rebooted the VMWare server refuses to start back up stating that it knows that its installed but it was not installed with the right installer.

This is on a Dell Server I can't remember the model right now but its got Dual PIII in it. I'm running Ubuntu Server 32bit 10.10 on the box as well. Thank you in advance for your assistance with this. Once I get this first server figured out I'll get my other one fired back up.

View 2 Replies View Related

Ubuntu Servers :: How To Start Automatically Vsftpd In Server After Reboot

Aug 5, 2010

how to start automatically vsftpd in my server after reboot?

View 5 Replies View Related

Ubuntu Servers :: Make Start An Iptables.cf Script On Server?

Mar 5, 2011

I am trying to make start an iptables.cf script on my server.

I have copied it into /etc/init.d/
And try to make it load with /etc/init.d/iptables.cf start
Then "not permission" (I was the root then).
So, sudo /etc/init.d/iptables.cf start
Then, "command not found".

View 3 Replies View Related

Fedora Servers :: Start SSH Server Before Login?

Sep 16, 2010

How would I get the SSH server to start before I've logged in?Basically, the problem I have is that if I'm connecedt to my computer remotely over SSH, and reboot the machine, I'm not able to SSH back in after it restarts. As far as I can tell, this is because the SSH server doesn't automatically start up until after I've logged in for the first time.How would I get around that? Surely that is a fairly common scenario for network admins (especially ones who have keyboardless and monitorless machines running).

View 13 Replies View Related

Ubuntu Servers :: Delete ALL Mail Server Settings And Start From Scratch?

Dec 21, 2010

I've kinda gone hopelessly lost on my mail server install and now want to start from scratch, after having wasted 4 days on this.Basically I have a 95% working postfix installation, a probably 100% working dovecot installation, but am not happy with it as a few things aren't working properly, and I don't know what I did!mail to /var/mail/richard NOT /Maildir - being the main oneBut, also the fact that I don't know where I went wrong, and want to understand why everything is now haywire. I am not certain if my security is working on the mail or the logins either.e to achieve is thefollowing:PostfixDovecotVirtual Users - using IMAP with Security, allowed to send mail from their clientVirtual DomainsPostfix AdminWebmail (Roundmail)Anti-Virus and Spam-filteringI started with this guide How to set up a mail server on a GNU / Linux system), which seems very, very good I might add, but it is for Courier, and when I bumbled along with the Dovecot equivalent ... that is where things broke.

View 5 Replies View Related

Fedora Servers :: Start To Build Up IMPS To Server

Oct 15, 2009

I start to build up IMPS to my server. Any ideas where to start? Any experience so far. I this think yamicocom like service. And about 5 bugs to get in. What you think? I need to put some extra to this basic concept.

View 2 Replies View Related

Fedora Servers :: Samba, How To Auto Start Server On Bootup On F1

Dec 18, 2010

Problem I have is the Samba server, it does not seem to start up the shares at boot.When I boot the system, nothing is available on the network, I have to run the Samba Server Configuration Tool everytime I want to access a share, edit a share, save and quit, then my network shares become available.I see Starting SMB services during boot up, it says OK.It worked good on Fedora13.

View 2 Replies View Related

Ubuntu Servers :: Installing Zend Server \ When Log In To The Admin Interface, It Told It Couldn't Start The Webserver?

Oct 18, 2010

I had installed apache previously on my system, and I think I uninstalled it completely, although remnants might have remained. I have just installed zend server ce php 5.3, and I am having trouble getting it to work. When I log in to the admin interface, it told me it couldn't start the webserver, so I go to restart apache, and it gives me this:* Starting web server apache2 Syntax error on line 6 of /etc/apache2/sitesenabled/zendserver_gui.conf:Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configurationThis has to do with php_mod some how... but I am not sure how to fix this, or where to start, since I am relatively new to actually setting up apache.I thought this might have something to do with libapache2-mod-php... so I went to reinstall it, and ran this:

mburns@mb2449-laptop:~$ sudo aptitude install libapache2-mod-php5
Reading package lists... Done
Building dependency tree


View 2 Replies View Related

Ubuntu Servers :: MySql Database Won't Start - How To Make It Start

May 4, 2011

I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?

View 9 Replies View Related

Ubuntu Networking :: DHCP3 Server Won't Start?

Feb 1, 2011

I have followed the ubuntu guide for setting up a dhcp3-server server for my internal network, I have installed dhcp3-server, configured it refuse to start, here are some background:This is my /etc/default/dhcp3-server:

# Defaults for dhcp initscript
# sourced by /etc/init.d/dhcp
# installed at /etc/default/dhcp3-server by the maintainer scripts


View 9 Replies View Related

Networking :: Ssh Server Won't Start

May 10, 2011

i use webmin to manage the networking tools and services and i am trying to setup an ssh server and webmin keeps telling me that the server isn't started i updated ssh by installing the source tarball from openssh.org and built and installed it. the installation was a success but i can't start the service and when i run the command


why won't the ssh server start i gave it a port and address whats missing do i have to downgrade the version number?

View 4 Replies View Related

Ubuntu Servers :: Dhcp3-server Fails To Start - Can't Open /etc/dhcp3/dhcpd.conf: Permission Denied

Oct 1, 2010

I installed dhcpd using:


Now when I try to run it, I get this weird error:


The error was:

I changed permissions to 777:


To no avail!

It's got something to do with AppArmor.

I don't think it is installed on this system:


View 1 Replies View Related

Ubuntu :: Running 10.10 From A Jump Drive?

Dec 17, 2010

I have an old acer aspire one that the hard drive has been cooked. the computers fine other then that, so what I'm trying to do is run it using 10.10 net book installed(not installer but actually installed) on a usb drive. I've created the installer on another jump drive and installed it onto the 8 gig using the aspire. everything goes fine, it tell me to reboot so i do and all i get is a black screen with the curser.It responds to nothing and never moves.

View 9 Replies View Related

General :: Making The Jump From XP Pro To Ubuntu 10.04?

May 6, 2010

I just finished making a clone image on my XP Pro HD and am now ready to install Ubuntu 10.04. Are there any scripts available that will install software that will add more functionality to my new Ubuntu installation? I installed 10.04 on a Dell Desktop circa 2003 with an 80GB HD and 512MB of RAM. Looking forward to using it!! Is this latest Ubuntu release better than XP Pro overall?

View 5 Replies View Related

Ubuntu Networking :: Configure A DHCP Server But When Try To Start It It Just Fails?

Jan 10, 2010

I'm trying to configure a DHCP server but when I try to start it it just fails.

Jan 10 16:25:52 SRV-LINUX00 dhcpd: Copyright 2004-2008 Internet Systems Consortium.


View 5 Replies View Related

Ubuntu :: VDPAU Slow And Jump In Maverick?

Oct 23, 2010

I recently upgraded to Maverick. I did a clean install on my system. I am running NVIDIA drivers from the X-Swat repo. Whenever I try to play a mkv file using Gnome Mplayer it is very jumpy and laggy. VLC, using it's new hardware acceleration, won't even display video, though it does output the audio. I experienced none of these problems with my 10.04 setup. I am unsure if it is a player bug, a driver bug or something with the VDPAU library itself.

View 9 Replies View Related

Fedora Networking :: F-12 Openvpn Server Does Not Start At Boot

Nov 23, 2009

This was working and stable on f-10 and f-11. Fresh f-12 install including openvpn, Copied /etc/openvpn/* to new system as root from working f-11 syatem. /etc/init.d/openvpn start (and stop) works as advertised HOWEVER when set to start at boot using chkconfig or Services Configuration program, openvpn does not start. I must manually start it every time. When started, it does work without error messages in the log.

I tried removing the NetworkManager-vpn module with no effect. Thought it could somehow be overriding the auto startup of openvpn at boot.

View 6 Replies View Related

Ubuntu Installation :: Bootloader Installed On Jump Drive?

Mar 30, 2010

I just finished installing lucid lynx netbook to my jump drive (full install) to save room on my hard drive. It's working fine except the bootloader was installed to the jump drive as well, meaning I can't boot my computer without the jump drive. Is there any way to correct it so that the computer boot from the hard drive while keeping my install on the jump drive?

View 2 Replies View Related

Ubuntu :: Download / Upload Programs With A Jump Drive?

Nov 18, 2010

This may be impossibly easy or easily impossible, but I'm looking for a step by step guide to download an entire program onto a jump drive, then to drop that program onto another computer.

View 2 Replies View Related

Ubuntu Installation :: Windows Appear Off Screen And Jump When Clicked

Dec 1, 2010

I have been running Ubuntu desktop on my Acer Aspire One AOA150-1635 for over a year now in one form or another. I originally dual booted XP and Ubuntu Netbook Remix but decided against the remix when I did a clean install (over a year ago). All the issues I had then were the same issues others were having and have been fixed for a long time. I just recently upgraded to 10.10. I am unsure if this problem was present prior to the upgrade and I just hadn't run across it yet. I am also getting ready to upgrade my desktop and am afraid I will have the same issues.

It seems that certain windows don't fit on this desktop. For instance when I open Compiz config settings manager the bottom of the window is below the screen. When I try to click an option the window jumps and the same thing happens to the top. I can also click anywhere on the window to make this happen. I have included a couple pictures (taken with my camera please forgive the quality) to show you exactly what it is doing. It is getting rather annoying when I try to open one thing and the other right above or below it opens instead. I have to place my pointer in the spot where the item I am selecting will be after it jumps in order to open what I mean to open. When I right click it gives me options as if I was right clicking on the desktop background. The other issue which seems to be related is not being able to get to certain parts of longer windows such as Gnome color chooser. It seems to run off screen as well.

View 4 Replies View Related

General :: When Using Grep From VIM, How To Jump To Results

Feb 22, 2011

When using the grep plugin to VIM, I can search the current directory for all occurrences of a string within a set of files, like this::grep Ryan *.txtThis outputs something like this:

file1.txt:3:Ryan was here
file2.txt:10:Ryan likes VIM
file3.txt:5:superuser.com is a fav of Ryan


View 1 Replies View Related

General :: NTP Clock Jump One Hour At 12:00 AM?

May 20, 2011

Yesterday I configured an NTP Server, and synched a sever with my NTP Server. Now some how my Client clock jumped one hour ahead at 12:00 AM, while HW Clock and NTP Server Clock remained.

cat /etc/sysconfig/clock
# The ZONE parameter is only evaluated by system-config-date.
# The timezone of the system is defined by the contents of /etc/localtime.


View 2 Replies View Related

Ubuntu Multimedia :: Can't Watch Heavy Mkv Files Coz They Jump During The Playback?

Jun 23, 2010

I upgrade mi connection between my PC to my TV, from VGA to HDMI, now I can't watch heavy mkv files coz they jump during the playback, I cant watch MD content on ..... coz the video keeps loading from time to time even if the video is fully loaded,resuming, crappy - not fluid. I tried changing resolutions and refresh rate between 1280 x 720 and 1920 x 1080 but nothing. Do I need to change my video card to be able to see 1080p media at 1920 x 1080 res in my ubuntu?

description: Desktop Computer
product: MS-7280
vendor: MSI
version: 1.0
serial: To Be Filled By O.E.M.


View 1 Replies View Related

Ubuntu :: Keyboard - Typing In An Application, The Cursor Will Jump Up And Over A Few Lines

May 12, 2011

I am running Ubuntu 11.04 on a DELL Latitude E6510 (bios A07). I am experiencing an annoying problem: It has this weird keyboard issue where whenever I am typing in an application, the cursor will jump up and over a few lines. The problem also happened under Ubuntu 10.04 and 10.10 and under bios A03.

View 6 Replies View Related

Slackware :: Get Jump And Scan Option For Xterm?

Jan 21, 2010

xterm is scanning lines one by one.It takes time.I did jumpScroll: true ,but it results same. But rxvt is better comparing this. Where would i get the global configuration file for rxvt and xterm?

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved