Ubuntu Servers :: Configuring The Zimbra And Apache?

May 26, 2011

I'm trying to install Zimbra and Apache. I'm having difficulty setting up DNS (if necessesary) and also configuring my /etc/hosts show me what the /etc/hosts should look like.

View 3 Replies


Ubuntu :: Configuring Apache And PHP To Use Same Doc Root

Feb 2, 2010

I'm new to Ubuntu and installed Apache, Tomcat and PHP using separate packages. All work well but it seems that the default doc root for Apache and PHP are in different places as:The following command to start Apache: sudo /usr/local/apache2/bin/apachectl start brings me to the "Test Page for Apache Install" and shows the Apache logo--successful--when I hit URl....Also, could someone please tell me how to stop PHP from starting Apache on boot?

View 5 Replies View Related

CentOS 5 :: Configuring The Dns And Apache?

Aug 11, 2010

where i can learn configuring DNS and apache

View 1 Replies View Related

Red Hat / Fedora :: Configuring Apache Web Server

Oct 19, 2009

I have to go through an ERP projects. "README" file to setup the software gives following instruction which I have attached with this thread.So, according to first step I copied the entire "dolibarr-2.6.1" folder in "/usr/local/apache2". But whenever I call the browser with address given in "README" file my browser gives the following error message : Code: Firefox can't establish a connection to the server at localhost.Please let me know how can I configure the Web Server so that I can use the software.

View 1 Replies View Related

Fedora :: Configuring Apache For SSl And Tomcat 5.

Jan 21, 2009

I have a Apache web server and a separate tomcat 5 server. I can run the jsp-exaples just fine using HTTP. However using HTTPS fails. For some reason it appears HTTPS is not forwarding to the connector, I get 404 not found, returned.If I simply try https://apache_server_ip I successfully connect to the default Apache page.According to this page it should just work. Apache should do the ssl encryption/decryption and tomcat operate as normal.

View 1 Replies View Related

Server :: Configuring Php For Virtualhosts In Apache

Jun 6, 2010

I am using the virtualhosts feature of Apache web server to host multiple domains on a single web-server. Is it possible to have different settings for php for different domains?

For eg:- I have mydomain1.com and mydomain2.com hosted on the same server. I want php scripts of mydomain1.com to connect to database but prevent database access for scripts of mydomain2.com. There are many php functions that I want to restrict for mydomain2.com.

View 5 Replies View Related

General :: Error When Configuring Apache 2.2 And Php 5.3.2 On RHEL5

Apr 22, 2010

i am in the process of installing apache 2.2 with php 5.3.2, my problem is that after installing and configuring them , this important module libphp5.so is no where to be seen under /usr/local//apache2/modules/, so when i attempt to start or stop apachectl , i get the following errors ..

httpd: Syntax error on line 54 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/libphp5.so into server: /usr/local/apache2/modules/libphp5.so: cannot open shared object file: No such file or directory

this is how am loading the module in httpd.conf

#LoadModule php5_module modules/libphp5.so

why isn't this file there . is there a way i can get this to work

View 2 Replies View Related

Server :: Configuring Apache / MySQL And PHP For AMXbans

Sep 24, 2010

I have a problem with AMXbans. My Linux is Slackware 13.0. , mysql is version 5.0.84, Apache/2.2.13,PHP 5.2.3 from locahost or real IP in internet explorer i see this error " Lost connection to MySQL server at 'reading initial communication packet', system error: 111".
In /var/log/httpd/error_log I see this error:

" [error] [client IP] PHP Warning: mysql_connect()
[<a href='function.mysql-connect'>>function.mysql-connect</a>]:
Lost connection to MySQL server at 'reading initial communication packet',
system error: : 111 in /var/www/htdocs/web/include/config.inc.php on line 48,
referer: http://My real IP/web/
//connect to db - "this is line 46"
$config->db_host=gethostbyname($config->db_host); "this is line 46"
$mysql = mysql_connect($config->db_host,$config->db_user,$config->db_pass) or die (mysql_error()); - "this is line 48"

View 1 Replies View Related

Software :: Configuring LAMP With Apache Tomcat

Apr 24, 2010

I am about to configure LAMP (Linux, Apache, MySQL and PHP) and following this link.However, I want to use Apache Tomcat instead of Apache, can I do so ?I can very well try and figure this out, but was just curious if someone has tried it. Or may be I can get some more ideas and useful links.I am just trying for knowledge.Meanwhile, if someone else is interested, these are the links used to download appropriate source packages.

- JRE & JDK : Java Platform Standard Edition (Java SE) 6 Update 10
- Tomcat
- Apache Ant

Here, "Apache" Ant is a software tool for automating software build processes. It is similar to Make but is implemented using the Java language, requires the Java platform, and is best suited to building Java projects.
- PHP 5.2.13
- MYSQL 5.0.90

View 2 Replies View Related

Fedora :: Configuring Apache - All The Mods Tried Crashed The Server

Oct 2, 2010

I have succesfully installed Apache... It works fine with PHP-MySQL support... I love it too...

But the thing is that I have to store all my files in /var/www/html/ which sort of annoys me... I was wondering of there is any method to reconfigure the httpd.conf file to do it...

All the mods I tried crashed the server....

View 3 Replies View Related

Software :: Can't Start Apache Server After Configuring, Compiling And Installing?

Apr 25, 2009

I've decided to install apache server from groundzero. So I've done next things:1)downloaded source tar with apache22)unzipped it3)./configure(d) it4)make5)make install
...But!!! I can't start it. apachectl in /usr/local/apache2/bin

error answer is:
[root@dhcppc1 bin]# apachectl start


View 6 Replies View Related

Ubuntu Servers :: Configuring The SuPHP With 8.04?

Jan 1, 2010

I am experiencing trouble configuring suPHP on my Ubuntu 8.04 web server. I've googled around quite a bit and the general consensus is that you first disable php5, then install the suphp module (I did that from the repo). I configured one of my Vhosts to use suPHP_UserGroup, but I get the following error:

Invalid command 'suPHP_UserGroup', perhaps misspelled or defined by a module not included in the server configuration

I know the module is loaded, so I'm not sure why I'm getting this error. Is a Vhost the right place for this setting? Note that I installed from the repository instead of compiling from source if that makes any difference. Any insight on this issue? I can provide configuration files if need be.

Edit: After some extended googling, from what I understand I have to recompile suPHP using the 'paranoid' mode. Am I correct?

View 1 Replies View Related

Ubuntu Servers :: Configuring RSyslog On 10.04?

Jan 13, 2011

Have any detail configuring RSyslog on ubuntu 10.04? with web interface view

View 2 Replies View Related

Ubuntu Servers :: Creating Virtual Apache Servers?

May 3, 2010

I have Webmin installed on an Ubuntu server. I currently have a successful apache server running on port 80, however I want to create a virtual host on port 81. When I try I go to servers->Apache Webserver-> Create Virtual Host I change the port to 81 and the document root to /var/port81www then I click create. How ever when I goto (local ip, I know I have to port forward but its not even working local) it does not work.

View 5 Replies View Related

Ubuntu Servers :: Configuring PHP - MYSQL GUI And XAMPP

Feb 8, 2010

I'm using ubuntu 9.10 64bit and I'want to configure php mysql and lampp. Also the package mysql-ser is already installed, so if I install MYSQL GUI tools(Administrator, query browser..) from my synaptic package manager will it detect the mysql already installed ? Also tried configuring lampp by extracting it in my /opt directory and i started the server, which MySQL ll it detect the one which was previously installed otr the oin that in gui tools ?

Also think the current ubuntu repository does't have latest build of mysql GUI tools, so how the above mentioned things ll change if I try to download the individual package.

Oveall what I want is to configure Mysql GUI tools, Mysql workbench, xampp and php(For this I'm using Bluefish and Komposer). Please help me out so that I can leave windows for my Web-projects.

View 1 Replies View Related

Ubuntu Servers :: 9.04 - Configuring Primary Master DNS?

Mar 18, 2010

I am using ubuntu server 9.04 version and trying to configure a primary master DNS on my server as followed the ubuntu official documentation [URL]. The files named.conf.local, db.example.com & db.192 are almost same as the documentation. And I can restart DNS. But when I followed the troublshooting page to ping example.com

thomas@UServer:~$ ping -c 4 example.com
PING example.com ( 56(84) bytes of data.
64 bytes from localhost ( icmp_seq=1 ttl=64 time=0.047 ms
64 bytes from localhost ( icmp_seq=2 ttl=64 time=0.067 ms
64 bytes from localhost ( icmp_seq=3 ttl=64 time=0.058 ms
64 bytes from localhost ( icmp_seq=4 ttl=64 time=0.061 ms

--- example.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2997ms
rtt min/avg/max/mdev = 0.047/0.058/0.067/0.009 ms

It is not show my server IP. Is it correct on the configuration?

View 9 Replies View Related

Ubuntu Servers :: Configuring 10.10 Server In VMware ?

Feb 17, 2011

I have attempted to set up ubuntu server 10.10 on my home network. I only have one computer and access to windows is a must for me, so what I have been doing is installing the server via VMware as a virtual server. Now, I have been able to successfully set up a server that works on the LAN, but for some reason I have been unable to get access to the server via the external ip address.

I will list all known information about my network, host computer and VMware.

I'm currently using VMware Workstation. For the virtual machine I have installed, I have allocated 500 GB of space to a partition on my 2 TB external hard drive. The network is currently set to NAT, but I would much prefer to Bridge the network so that the guest would be assigned a unique LAN address.

The host computer is a laptop. It is connected to the internet through a wireless router. I can successfully host a teamspeak server that accepts incoming traffic from the internet. The operating system that is installed is Windows Vista.

The network is set up as follows:

The host's LAN address is and is connect to the Router which has an address of I am using a Netgear WNDR3300v1 wireless router. The webserver itself would likely have the IP in the circumstance that the network was bridged for the virtual machine. So the WAN Interface would be the modem my company has provided which has assiged the external IP The modem is a cable modem, the brand is a motorola surfboard.

View 6 Replies View Related

Ubuntu Servers :: Configuring Samba For File Serving?

Mar 15, 2010

installed ubuntu 8.10 64bit on left over parts for file serving with windows 7, tried the sample config file that installed with it with no luck, then tried new config file, looking at the samba.org website and other peoples configurations i came up with this

netbios name = NETBIOS_NAME
workgroup = workgroup
security = user


View 3 Replies View Related

Ubuntu Servers :: Configuring 32gb Sd Card For Raid 1?

Dec 27, 2010

i am setting up a raid 1 on a netbook with the 30gb internal ssd as the primary drive and the 32gb sd card as the mirror. i am following the instructions here...


i have several working raid 1 arrays under my belt using usb sticks and want to try something more advanced and practical now.i have configured the internal ssd with no trouble, however, the 32gb sd card is not showing up in the installer. so i cannot configure it as the mirror. my 2gb sd cards show up when i run the installer why doesn't the 32gb sd card? if i boot into a session the primary ssd the 32gb card does show up mounted on the desktop. it shown as a dos partition.

View 5 Replies View Related

Ubuntu Servers :: Configuring Print / Scan Server

Jun 13, 2011

I recently installed Ubuntu 10.04.2 Server on a small desktop to use as a print server. During installation I marked the sSH, Print, and Samba services.I can ssh into it just fine and that's how I'm configuring it. I have a hp Deskjet F2210 connected to it.My end goal is to be able to use the scanner from my *buntu desktop and from a desktop running XP. All of these being connected via ethernet router.

View 9 Replies View Related

Ubuntu Servers :: Configuring Samba Permissions To Emulate Netware?

Apr 22, 2010

I'm replacing an ancient Netware server with a new Ubuntu 8.04 box running samba and LDAP. I want to see if there's a way to get Samba to emulate the way permissions propagate through Netware. Namely, if I see a directory structure like this:

[User Cant See]
--- [User Cant See]
------- User Can Edit.txt
------- User CANT Edit.txt

With Netware I can give permission to User to edit "User Can Edit.txt" and the permissions will propagate in reverse to allow User to see the two [User Cant See] directories and edit the text file. "User CANT Edit.txt" will still be invisible to User. This is very convenient as I can simply give user access to one file, they can navigate to it through the directory structure, and all files not explicitly given access to will still be invisible.

With Samba the only way I've been seeing to get this would be to explicitly give User access to both [User Cant See] directories, give him access to the "User Can Edit.txt" and remove any access to "User CANT Edit.txt" and every other file in the latter two nested directories.

View 4 Replies View Related

Ubuntu :: GUI For Parts Of Server 9.10 And Zimbra?

Mar 11, 2010

I am completely new to Ubuntu so please make your answers really simple ! I want to set up a mail server for a home network and have been suggested I use the Ubuntu solutions. I am fairly proficient with Windows programs and even construct databases but I am a complete novice when it comes to command line instructions. Yes, I know I have been spoon fed!

I have been told that it is possible to install Server programs from the Desktop version and that they provide a GUI in most cases. Is that so? I have the desktop version running and up to date but I am unsure what to do next. Starting the Server ISO CD from Desktop seemed logical but when I did I was not sure if it was correct and backed out. I have also read a thread on this forum that suggests the use of Zimbra as a Mail Server, it sounded like my kind of solution so I think I would like to try that.

One last factor. I have an existing P2P network (2 Vista, 1 Mac Book and this Ub' desktop/server) running already which uses the Router for DNS. I suspect I am going to have to do things in a certain order if I am not going to go backwards and ruin the families email and surfing!

View 1 Replies View Related

Ubuntu Servers ::configuring FCGI To Run Redmine - Forbidden You Don't Have Permission To Access

Nov 14, 2010

I have installed Redmine according to the instructions on [url] according to the mod_cgi instructions which seem to be the easiest to follow.

The script installed in the installation directory was called 'dispatch.fcgi', and not parsing when I visited the page through the browser, just displaying the contents of the script. OK, so I installed the apache mod libapache2-mod-fastcgi using apt-get. Then 'a2enmod fcgid' followed by an apache restart.

Now when I visit the Redmine folder through the web browser I get 'Forbidden You don't have permission to access /redmine/dispatch.fcgi on this server.'

I checked to ensure www-data owns all files and has correct permissions to the folder. But this doesn't seem to work.

View 3 Replies View Related

Fedora Servers :: Configuring Non-standard Http Port?

Jun 23, 2011

It appears that my ISP is blocking port 80, so I can't set up a proper website on my home computer. I'd like to choose a different port to use (they block 443 also), and I'm not sure how to do this with Fedora (or any Linux flavor for that matter

View 2 Replies View Related

Ubuntu :: Install Zimbra Email Server In 10?

Jul 11, 2010

Is there some step by step? for ubuntu 10.04 server?
or there is something better ?
if there is something like colaborative email server like gmail will be great.

View 2 Replies View Related

General :: Configuring 2 Mail Servers On Different IPs But On Single Vmware Machine?

Sep 29, 2010

I want to know the configuration steps for 2 mail servers on diferent IPs. But I want this setup on single vmware machine(debian).

View 3 Replies View Related

OpenSUSE :: Zimbra Cannot Find Sqlite?

Sep 13, 2011

When I try to install Zimbra 7.1.2, the installation fails because it cannot find sqlite. I used strace and found that it uses "rpm -q sqlite" to find the package. But it fails-"package sqlite is not installed". Although I have sqlite installed:

#rpm -qa | grep sqlite


View 6 Replies View Related

Server :: How To Setup Zimbra With Procmail

Mar 3, 2011

Have any one been able to setup zimbra with procmail? Procmail as the filter for zimbra I mean.

View 1 Replies View Related

General :: Failing To Log In Zimbra Console Admin

Aug 29, 2010

i have successfully installed zimbra on Debian machine but am failing to log in to the console admin. i have used my server name as well as my ip address but both do not work.

View 8 Replies View Related

General :: Perl Not Recognized By Zimbra Installer?

May 14, 2010

I am attempting to install zimbra onto Ubuntu Hardy 8.04 x64 bit edition using this tarball:



However when I run the install script I get this error:


Press Return to continue

Checking for prerequisites...
FOUND: sudo-1.6.9p10-1ubuntu3.7
FOUND: libidn11-1.1-1


Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at [URL] the Perl Home Page.

View 3 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved