Ubuntu Servers :: Apache Update Breaks PHP
Oct 20, 2010
I updated my server (Ubuntu 10.04 LTS) today and had about 23 updates in Webmin. After the update suddenly apache doesn't render php pages anymore, instead letting you download the source code for the scripts. I checked the logs and found this:
Code: Syntax error on line 1 of /etc/apache2/mods-enabled/php5.load: Cannot load /usr/lib/apache2/modules/libphp5.so into server: /usr/lib/apache2/modules/libphp5.so: cannot open shared object file: No such file or directory I tried reinstalling php5 but I can't get it to work. I also hope that this was a glitch and that updates that break stuff like this don't get through QA.
View 9 Replies
ADVERTISEMENT
Mar 5, 2010
It seems that updating the Kernel breaks my installation. I've tried it twice, and both times it disabled my gui desktop. I'm posting this with links2 in my terminal. The terminal works perfectly.
This is really annoying, as I can't even use my computer. What do you think is the problem?
View 6 Replies
View Related
May 28, 2010
a fresh install of 10.04 all worked well installed apps as i wanted all went well... system update download completed no restart required... restarted anyway only get grub prompt... repeated this operation twice.... how do i fix getting fed up with ubuntu promising easy of use ...
View 6 Replies
View Related
Feb 10, 2010
I did an update during a time when power was cycling due do a nasty snow storm, but I'm pretty sure the update was completed successfully before I lost power. What did happen though is that my BIOS setup was reset.
Now if my HP Laserjet 1020 is plugged into USB during boot all other USB devices freeze for a while. So I played with my BIOS setting for USB:
- Enabled V1.1 and V2.0
- Disabled System USB Shadowing
So now my bootup doesn't hang. But now when I actually go into Karmic I still can't print.
dmesg shows the following:
[ 205.940008] usb 1-10: new high speed USB device using ehci_hcd and address 9
[ 219.510026] hub 1-0:1.0: unable to enumerate USB device on port 10
[ 223.430008] usb 1-10: new high speed USB device using ehci_hcd and address 10
[ 223.600766] usb 1-10: configuration #1 chosen from 1 choice
[Code].....
View 4 Replies
View Related
Mar 30, 2011
I've got a strange problem. I have the following system:
[Code]...
After doing this install everything works fine as expected. I can reboot, shutdown and bootup as I much as I want to and the system will work. Now, I proceed to do the following (as root obviously - sudo bash)
[Code]...
When I try to restart the system now, I get to the grub boot loader and then it just breaks with the following message I've identified 'mdadm' as being the culprit here. Any idea why this would happen? Just a subnote. The reason I'm installing mdadm is to create a soft-raid as follows with the remaining space on each drive:
[Code]...
View 5 Replies
View Related
Dec 23, 2010
I just updated my kernel to the latest version (2.6.35-24). Now my suspend function on my Thinkpad SL510 no longer works. The system simply hangs with a solid cursor in the corner of a black screen. USB devices remain powered on, HDD keeps spinning, and all indicator lights remain lit. When this happens, the only thing I can do is hold the power button down for a hard power off.My first thought would be to troubleshoot this with dmesg, but I don't know how to record dmesg after a power off. The message buffer is reset when I reboot.
View 1 Replies
View Related
Jul 17, 2011
My mythbuntu 10.10 system including its lirc managed remote control has been working fine.I've recently done some updates (see below) and now the remote doesn't work correctly (only some of its keys seem to work). I suspect that lirc is no longer managing the remote and now instead the remote is now being treated like a keyboard.How do I get lirc managing my remote control correctly again,Before the updates the kernel was:
Code:
$ uname -a
Linux pvr 2.6.35-28-generic-pae #50-Ubuntu SMP Fri Mar 18 20:43:15 UTC 2011 i686 GNU/Linux
[code].....
View 2 Replies
View Related
Mar 11, 2010
I updated my fedora 12 GNOME installation. Now Compiz fusion is not working. It says Accelerated 3D support not found. Though Nvidia drivers are already installed. Now I can't even ALT+TAB between open applications.
I tried "metacity -- replace" but then windows wore a weird look with only a minimize button. No sign of maximise & close buttons.
View 14 Replies
View Related
Aug 14, 2011
I updated last night and after a reboot I can get the GDM login but as my desktop loads it suddenly stops and complains of an error and won't load. If I load legacy Gnome desktop with Compiz it loads but ALL the lettering and words on the interface are messed up. By this I mean the letters are upside down and the words are spelt backwards. The mouse menus also work in reverse as in the menus themselves are also upside down and the highlighting moves from bottom to top as I move down the menu. Amusing but not what I want from my computer. There is nothing in /var/log/messages or /var/log/Xorg.0.log that would indicate anything is wrong.
I sooo don't want to have to rebuild, again, because of instabilities in F15 updates.
View 10 Replies
View Related
Mar 2, 2009
I just got a set of updates from Xorg11 (Index of /repositories/X11:/XOrg/openSUSE_11.1/i586) repository and now, my X doesn't come up. During update, zypper complained about xorg-x11-libxcb and it didn't get updated. On further investigation I noticed that libxcb-xlib.so.0.0.0 is missing in the new package (version 7.4-4.2. The one currently installed in 7.4-1.24).
View 9 Replies
View Related
Aug 29, 2010
My .htaccess file looks like this:
Code:
Options -indexes
RewriteEngine on
RewriteBase /
[Code].....
View 3 Replies
View Related
Jul 24, 2011
I'm sending files to a remote server by way of FTP via a PHP script. With the firewall turned on these files are getting to the remote server with 0kb and the remote server is timing out before all the files are received. When the firewall is turned off the all files are received in tact. There are no outbound rules set in the iptables, looking for ideas on what to check next.
View 4 Replies
View Related
Dec 29, 2010
I upgraded my Linux kernel from 2.6.35-23-generic to 2.6.35-24-generic and the Broadcom wireless STA driver stopped working. If I try to reinstall it with Jockey it fails and shows this in the log:
[Code]....
View 3 Replies
View Related
Jul 22, 2011
yesterday I updated my squeeze amd64 on my Phenom X4 and now it is not booting anymore. Have you experienced the same problem?
After that I noticed the shutdown was not working anymore, it just restarted instead of powering down. This morning it wouldn't boot squeeze anymore, when grub starts and prints "Welcome to grub" (or something like that) the list of operating systems is not shown.
I noticed the updated also included grub and I saw it correctly detected my operating systems.
I am planning to boot knoppix soon and try to reinstall grub from chroot, but currently I am at work.
View 2 Replies
View Related
Dec 24, 2009
I installed Chromium via a repo generously maintained by Tom "Spot" Callaway. Since it's his repo I thought I'd contact him, but I don't really know how - so I'm brining my issue to the forum to see if anyone has a possible solution.I've been using Tom's Chromium fine for the past couple months. After a "yum update", Flash no longer works in Chromium. It works in Firefox. If I try to play any Flash videos it's just a blank box.
View 3 Replies
View Related
Nov 3, 2010
After I had upgraded the system to Fedora 14, the icons for pretty much everything except for programs and plain text files in gnome theme (and every other theme that shares them) became inaccessible - they are replaced by a standard icon that appears when no other is found. Other themes, that share no icon with gnome (tango, gnome-colors, etc.), work correctly. I'm using Xfce desktop.
I've deleted icon-theme.cache, but it did nothing.
Any suggestions, what may be causing this?
View 7 Replies
View Related
Aug 8, 2011
I run an Aspire One 522 with a Broadcom BCM4313-Wlan-Card and Fedora 15. To run the card, I had to install der broadcom-wl-Driver, as described here: [URL]... It worked okay. (Althought not perfect. It crushed everytime the whole system, when it tried to connect to a WLAN-Net, unless I first started the Windows on the computer, then shut it down and restarted Fedora. But maybe thats some strange Dual-Boot-thing.) Anyway. After I updated the Kernel to 2.6.40 it seems to be broken. I deleted the driver, reinstalled it, tried the B43-driver. But no mater what: It seems like the NetworkManager doesn't find the card at all. lsmod shows that a modul "wl" is running. And - as mentioned - I installed the Kernel and the two other packages fresh form the repositories.
View 3 Replies
View Related
Feb 24, 2010
I am not fully sure if this belongs more to the networking section or the software. O hope it is related to here enough.
My problem is as the topic says.
My port 80 seems to be already taken. lighttpd fails to start reporting that it cannot bind to port cause its already taken.
The error message itself:
Code:
"Starting web server: lighttpd2010-02-21 07:01:02: (network.c.345) can't bind to port: :: 80 Address already in use failed!"
I am not able to crack this by myself. Ihve tried investigating this by
Code:
lsof -i :80
netstat -ape | grep -v unix
First doesn't show anything second anything abt port 80.
Now hints I can think of. Maybe you have more experience and ideas what I can do and where should I look for the culprit.
I am using debian (unstable) and lighttpd. I even tried rebooting; it says that the port is taken already at the boot sequence (well it starts pretty much at end anyway but the system should be clean).
It seems that it started failing after a major distro update, so maybe there are some conflicts based on ipv6/v4 or something, though I have no idea what it could be. Well my hit for that is the part of error msg "bind to port: :: 80 ". This "::" looks like ipv6 naming convention. Maybe its lighttpd internal.
View 2 Replies
View Related
Feb 7, 2010
I have just updated my Squeeze system. The update included a newer version of network-manager (and it can not be more than a few hours old). After the update all network functionality on my machine (via knetwork-manager) is broken. The GUI applet has no effect.
Hence can anyone help me: a) Downgrade network-manager by one version; b) Find out what is causing knetworkmanager to break; c) See if the problem is with knetworkmanager or network-manager.
View 5 Replies
View Related
Oct 10, 2010
I'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages
I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...
View 8 Replies
View Related
Mar 22, 2010
Alright, so I upgraded my old fedora 10 server to Fedora 11 with a netinstall CD, but now service httpd restart is broken. I already had to delete the old config file and reinstall apache, but now I can't restart it. I can kill it and then start it manually, but it never stops the running instance and fails to bind the port. I know it's because /var/run/httpd/htpd.pid is in the wrong place, which would be /var/run/httpd.pid, but do I have to make a symlink every time I want to restart it? I edited all the config files to point to the right place, but the system does not honor them. What do I do?
View 3 Replies
View Related
Jan 6, 2010
I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies
View Related
May 3, 2010
I have Webmin installed on an Ubuntu server. I currently have a successful apache server running on port 80, however I want to create a virtual host on port 81. When I try I go to servers->Apache Webserver-> Create Virtual Host I change the port to 81 and the document root to /var/port81www then I click create. How ever when I goto 192.168.1.5:81 (local ip, I know I have to port forward but its not even working local) it does not work.
View 5 Replies
View Related
Jul 30, 2011
I received stunnel 4.40-0.6.1 as an update from "zypper up" (openSUSE 11.4).After a reboot, stunnel does not work anymore for the programs that need it.Symptom: the program (emacs+mew) hangs for ever, telling me
"Creating an SSL/TLS connection..."
/var/log/messages does not contain a clue and restarting stunnel via
"rcstunnel restart" looks fine:
[code]....
View 8 Replies
View Related
Aug 21, 2010
I have Ubuntu Karmic 64-bit installed. Update manager tells me there are updates available, but when i try to install them, downloading the updates fail and throws this error:
Code:
Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/e/eglibc/libc6-i386_2.10.1-0ubuntu16_amd64.deb
Consequently, a similar error occurs when I try installing Sun Java 6 Runtime.
Code:
Failed to fetch http://archive.ubuntu.com/ubuntu/pool/multiverse/s/sun-java6/sun-java6-jre_6-15-1_all.deb Connection failed [IP: 91.189.88.31 80]
Ubuntu Restricted Extras stalls when it's time to download the Java package I tried synaptic, update manager, aptitude, apt-get, and they all throw similar errors. Then I also tried connecting to different servers, to no avail. So to check if it's my connection to the net that has problems somehow, I tried downloading the file directly through my web browser, and it works. (But it's not recommended, and it won't let me!, install the updates manually, right?) I tried searching for the errors on the net and in the forums, and they're all somehow related to proxy servers. I then checked if I'm using some inappropriate proxy settings, and everywhere it's all set up to connect to the net directly, which is, well, my setup.
Take note though, that I am able to install other softwares normally, i.e, using synaptic, apt-get etc. The ones I tried include Pidgin and Mplayer. It's just these updates and Java:
Code:
jeanne@jeanne-desktop:~$ sudo sudo aptitude upgrade
W: The "upgrade" command is deprecated; use "safe-upgrade" instead.
Reading package lists... Done
[code].....
View 3 Replies
View Related
Jan 17, 2010
When I go to localhost, and try to open any PHP file, it asks me to download the file rather than run it like it should. JSP doesn't appear to be working either. I'm not to concerned about the JSP though.
I'm running KUbuntu 8.04 with KDE 3 on a 64bit machine.
View 9 Replies
View Related
Feb 11, 2011
I was running 10.04 LTS and had decided to stick to the LTS versions as I'm now running my machine as a server and don't want to be updating regularly.Every time I logged in via SSH I got a message telling me there where packages to update including a security update. So I did a search to find out how to perform an update on Ubuntu server from the command line.What I found was to do this:sudo apt-get updatesudo apt-get dist-upgradeAfter doing that I rebooted but now my machine gives me this message:
init: ureadahead-other main process (794) terminated with status 4Your disk drives are being checked for errors, this may take some timePress C to cancel all checks currently inprogressI'm not pressing C yet and leaving it alone to finish, but I noticed when the machine booted that one of the options for booting talked about Ubuntu 10.10, so I'm worried that I've updated from 10.04 LTS to 10.10 by accident?
View 8 Replies
View Related
Jul 6, 2010
I've installed Apache 2 on Ubuntu linux 10.04 as a simple LAN site for testing PHP scripts. But even though I've deleted the default index.html file in htdocs, changed the index file to index.php, put an index.php, chmoded to 775, and gave ownership of the folder to my account, it will not update any of the files. Any time I go to 127.0.1.1 or 127.0.0.1 (Both work, somehow), it has the "It works!" page instead of the page I put there. And yes, I've tried restarting apache, restarting my computer, etc. What's the problem and/or how do I fix it?
tl;dr: Apache keeps displaying the "It works" page even though I've replaced it. How do I fix it?
View 2 Replies
View Related
Apr 19, 2009
I've install F10 to use it as server and router and found a strange problem on my XP machine which is behind the F10. I've tried to update my Lineage2 client from official server but the update crash, tried to open the web page it didn't open. Also tried to open microsoft web it didn't open. When i try to open the same pages on PC with F10 they open with no problem.
[Code]...
View 6 Replies
View Related
Apr 23, 2010
I've run into a problem and I don't know if it's apache or php or the combination of both. I can compile apache 2.2.15 just fine, but whenever I try to compile php 5.3.2 into my server, the first two steps work just fine but when I get to the make install part it shows the libphp5.so and it just stays there and I have to cancel the install because it won't finish.
View 5 Replies
View Related
