Ubuntu Servers :: 9.10 Fails To Start Ureadahead-other Status 4

Apr 13, 2010

My ubuntu server was working normally but it suddenly failed to start, stopping after the following message: init: ureadahead-other main process (587) terminated with status 4 after this message, the system halts and does not finish the start up processes.

If I start the server in recovery mode, I get: init: ureadahead-other main process (587) terminated with status 4 [ 21.892940] ACPI: I/O resource w83627hf [0x295-0x296] conflicts with ACPI region HWMI [0x295-0x296] the system also halts and does not start. Right now, I can not use the server at all.

View 2 Replies


ADVERTISEMENT

Ubuntu :: Boot.log Ureadahead - Ureadahead-other Main Process (759) Terminated With Status 4

Sep 10, 2010

i had a couple of things popping up during bootup and checked my boot.log and found this

Code:
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
udevd[416]: can not read '/etc/udev/rules.d/z80_user.rules'
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
[Code]....

View 3 Replies View Related

Ubuntu :: 10.04 Boot \ Ureadahead Main Process (20 Terminated With Status 5?

May 9, 2010

Last night i have upgraded my 9.10 to 10.04. After rebooting the system i couldnt boot linux.I got the following message:Starting up ...mount: mounting none on /dev failed: No such deviceinit: ureadahead main process (20 terminated with status 5After that message some 10.04 check disk started, but nothing good came out of it.

View 3 Replies View Related

Ubuntu :: Init: Ureadahead Main Process 388 Terminated With Status 5

Nov 7, 2010

I have Ubuntu 10.10 installed. When I boot, this error message appeared "init: ureadahead main process 388 terminated with status 5" After that, another error message appear saying " *ERROR* render ring head not reset to zero"

View 2 Replies View Related

Ubuntu :: Init: Ureadahead Main Process (423) Terminated With Status 5?

Dec 1, 2010

Code: init: ureadahead main process (423) terminated with status 5 Ubuntu 10.10 lorentz tty1

lorentz login: The first line of the above shows up during boot before the display goes graphical. I can see it again (all of the above) when I Ctrl+Alt+F1 to access the first text console. Anyone know what is causing this, what problems can happen as a result, and what should be done about it? I moved from 9.10 on one machine to 10.10 on a new machine, so I don't know if it's a hardware problem or software. I am running 64-bit. I am not really seeing any problems happening besides the few scattered application and GUI glitches that are common with a new/migrated setup.

View 2 Replies View Related

Ubuntu :: Init: Ureadahead-other Main Process (814) Terminated With Status 4

May 20, 2011

I found below message in my boot.log. init: ureadahead-other main process (814) terminated with status 4

View 4 Replies View Related

Ubuntu :: Doesn't Booting Up - Black Screen Appears With The Text: Init: Ureadahead Main Process (306) Terminated With Status 5

Sep 11, 2010

I installed Lucid Lynx on my laptop a couple of months ago and for the most part everything was working fine. However, just recently the computer doesn't seem to be booting up at all. I start up the machine and then a black screen appears with the text: init: ureadahead main process (306) terminated with status 5 the (#) is different in some boot-ups

And the computer just hangs there. typing anything doesn't seem to help at all. I press enter and a new line just appears. I've left it there for hours and still no login screen.

View 9 Replies View Related

Ubuntu Installation :: Error "ureadahead Main Process (274) Terminated With Status 59 Starting Up"

Apr 14, 2010

Quote: init: ureadahead main process (274) terminated with status 59 Starting up... There is a blinking cursor under the 'S' in Starting. It doesn't boot or respond to any escape combinations that I know. Several retries have yielded the same screen. I read the original post and a few comments here about ureadahead, but did not find anything related to my problem.

View 1 Replies View Related

Ubuntu Servers :: Apache2 Fails To Start ?

Jan 17, 2010

How to resolve this apache2 problem I keep getting, I have installed a debian LAMP server with ispconfig3 and everytime I reboot apache fails to start, I don't know and I have done some research but nothing seems to work, which leads me to reinstall everything from scratch again, I think I have reinstalled at least 10x or more.

When ever I reboot I get the following error

Code:

View 9 Replies View Related

Ubuntu Servers :: Mysql Fails To Start After Upgrade To 9.10?

Feb 18, 2010

I've just upgraded to 9.10, and mysql fails to start. When I do an /etc/init.d/mysql start, I just get
* Starting MySQL database server mysqld ...fail!with no additional errors or information to say what went wrong. I saw this thread http://ubuntuforums.org/showthread.php?t=1322070 but the fix mentioned does not apply, as I don't have the #skip bsd line in my config file.

View 5 Replies View Related

Fedora Servers :: Squid Fails To Start?

Mar 4, 2009

I am running fedora 10 and webmin squid proxy server, after power failure the squid fails to start. i have tried to start it from command line but failed

[root@ ~]# /etc/init.d/squid start
Starting squid: .................... [FAILED]
[root@ ~]# /etc/init.d/squid reload

[code]....

View 1 Replies View Related

Fedora Servers :: Ejabberd Fails To Start In F-12 / Solve This?

Nov 23, 2009

Ejabberd fails to start in f-12. ejabberd-2.0.5-9.fc12.i686. This ran fine in f-10 and f-11. Getting a large number of strange error messages from the ejabberd log code...

Looks like it may be a permissions problem.

Anybody from the ejabberd community here that has gotten ejabberd to work on f-12?

View 1 Replies View Related

Fedora Servers :: HTTPD Fails To Start On Boot

Aug 24, 2010

I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked

I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.

View 8 Replies View Related

Ubuntu Servers :: Dhcp3-server Fails To Start - Can't Open /etc/dhcp3/dhcpd.conf: Permission Denied

Oct 1, 2010

I installed dhcpd using:

Code:

Now when I try to run it, I get this weird error:

Code:

The error was:

I changed permissions to 777:

Code:

To no avail!

It's got something to do with AppArmor.

I don't think it is installed on this system:

Code:

View 1 Replies View Related

Ubuntu Installation :: Empathy Fails To Set Facebook Status?

May 9, 2010

I just recently started using Empathy, and so far, it's great with one problem.As long as Empathy is online, my Facebook status (as others see it) is "available", regardless of how I have my status in Empathy. Kind of puts a damper on things when people think I'm being rude and ignoring them. Have others experienced this issue? Is this a user error, or something that needs to be fixed upstream?

View 6 Replies View Related

Ubuntu Networking :: 9.10 - OpenVPN Client Fails (Error Status 7)

Jan 9, 2010

I have openvpn server configured with bridged interface on my openwrt router. The client is running ubuntu 9.10 with config:

Client
dev tap
proto udp
remote x.x.x.x 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca /home/blwegrzyn/openvpn/ca.crt
cert /home/blwegrzyn/openvpn/client1.crt
key /home/blwegrzyn/openvpn/client1.key
comp-lzo
verb 5
(x.x.x.x was hidden)

When the client connects the log says:
WRRRWRSat Jan 9 20:16:03 2010 us=332404 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 192.168.1.241,route-gateway 192.168.1.254,ping 10,ping-restart 120' .....
Sat Jan 9 20:16:03 2010 us=343906 ERROR: Linux route add command failed: external program exited with error status: 7

The server is trying to push default gateway 192.168.1.254 to the client and the client is on 192.168.2.0 network as you can see the route addition fails with SIOCADDRT: No such process. This is because the tap interface does not have any ip and the route addition is not possible. The tap interface is not getting the dhcp address through the tunnel, not sure why (this works on XP). To fix the problem I must manually add the ip to the tap interface, and the default gateway, but then i must add dhcp server to resolv.conf to make it work and once I disconnect the computer does not know the old valid dhcp anymore and cannot communicate. Why openvpn cannot get the ip automatically? Why it cannot grab the dhcp from the tunnel? Is it related to the wireless card being managed by the network manager? This works perfect on windows machine (xp sp3).

View 3 Replies View Related

Ubuntu Installation :: Adobe - When Click On Icon In Start Menu Or On Desktop It Fails To Start

Oct 27, 2010

I installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal

It extracted and asked me for a installation location, to which i put [~]

It then finished the installation.

But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!

View 2 Replies View Related

Ubuntu Security :: Post-start Process Terminated With Status 1?

Feb 22, 2010

When I restart my computer the following messages come up:
__________________________________________________ _
init: usplash post-start process (2221) terminated with status 1
* Stopping ClamAV virus database updater freshclan

[code]....

View 6 Replies View Related

Ubuntu Installation :: Init: Dbus Pre-start Process (511) Terminated With A Status 1

Aug 19, 2010

I had been having problems with every LiveCD after 8.04.1 I tried both xubuntu and ubuntu (same internals, same results)

I ended up installing xubuntu 10.4 using the text mode installer.

The system basically works, I can not get gdm running.

dbus fails as noted above. I found launchpad bug #446971 and tried some of the work arounds with no success.

The system is an old eMachines T1120

Code:
CPU: Intel Celeron Processor 1.20GHz (w/256KB)
Operating System: Genuine Microsoft Windows XP Home Edition
Chipset: Intel 810e chipset

[Code]....

View 1 Replies View Related

Ubuntu Servers :: LTSP Mount Terminated Status?

Mar 8, 2010

I've just installed Ubuntu 9.10 64bit on my new server and then built a 32bit image. When I try and boot my thin clients I get the following error on VT7:

Code:
mount: according to mtab, aufs is already mount on /
mountall: mount / [416] terminated with status 1.
mount: according to mtab, none is already mounted on /proc
mountall: mount /proc [409] terminated with status 1.
mount: according to mtab, none is already mounted on /sys

[Code]...

View 4 Replies View Related

Ubuntu Servers :: Interpreting Mdadm RAID1 Status?

Feb 7, 2011

I have a RAID1 array, where mdadm states that one of the disks is "removed." Naturally, I assume one of the drives has failed. The mdadm --detail command tells me that the sda drive has failed. However, further inspection from the mdadm -E /dev/sdb1 command says that sdb1 disk has been removed. I am a bit confused. Can someone clarify which drive is failed? Am I misreading the command outputs?

Code:
sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

[Code]...

View 3 Replies View Related

Ubuntu Servers :: Mdadm Incoonsistent Status On Disks In Same Array

Jan 21, 2011

when I start my raid5, only 2 disks of 3 are active on md0. The 3rd disk is inactive on md_d0.When I do mdadm --examine, the two active disks report 2 active, 2 working, 1 failed. the inactive disk resports 3 active, 3 working, 0 failed.

View 2 Replies View Related

Ubuntu Servers :: Error Is Not Recoverable: Exiting Now Tar Child Returned Status 2

Jan 16, 2011

Attempting to install Abyss Web Server on my 64 bit laptop. i have done mkdir ABYSS to create the ABYSS directoty to install the server to. Command cd ABYSS then "tar xzfm Abyss Web Server installation package" as per instructions. Result tar (child) Abyss cannot open; No such file or directory tar: (child) Error is not recoverable: exiting now tar Child returned status 2 tar: Error is not recoverable: exiting now likely .

View 5 Replies View Related

Ubuntu Servers :: Smbd Not Running - Reinstall It But Still Giving The Erroneous (?) Status Message ?

Feb 3, 2010

Here's the background info -- I recently installed Ubuntu server 8.04 on TWO machines that are exactly identical.On one machine, all seems perfect.On the other, when I execute "/etc/init.d/samba status" it always shows that smbd is NOT running.But it would seem that it IS running, since I can access the shares I've set up without difficulty either from smbclient on the server or from the windows boxes on the network.ps ax lists smbd as a process as well.The log tells me nothing -- it just reports that samba started. No errors. Not much of anything in there. And if I execute smbstatus, that works just like you'd expect.since the two machines are identical (and I mean exactly the same), and only one is doing this.

I guess I should be happy since they both work (seemingly perfectly).But it still bothers me that I'm getting the message that smbd isn't running on one of them. I tried uninstalling samba and reinstalling it on the machine giving me the erroneous (?) status message. But that changed nothing.Right now there's no data on the machine, and it's not in production, so just doing a bare metal reinstall of the OS is an option. But I'd like to understand what's happening.

View 5 Replies View Related

Ubuntu Servers :: Postfix 'status=bounced' Unable To Send Email To A Domain?

Sep 8, 2010

After a reboot of my VPS, I keep getting the following error when sending email to my domain (hosted on Google Email). I can send to other email addresses but my own. So it seems like postfix thinks all mydomain.co.nz is to be sent internally?

Sep 9 09:25:05 mydomain postfix/pickup[20784]: 0316C3CC68: uid=1000 from=<sidb>
Sep 9 09:25:05 mydomain postfix/cleanup[20806]: 0316C3CC68: message-id=<20100908212505.0316C3CC68@mydomain.co.nz>
Sep 9 09:25:05 mydomain postfix/qmgr[20783]: 0316C3CC68: from=<sidb@mydomain.co.nz>, size=326, nrcpt=1 (queue active)[code].....

How do I tell postfix that mydomain.co.nz is to be sent to Google email server?

View 2 Replies View Related

Ubuntu :: Twitter Status / Update Pidgin Status In Lucid

Jul 5, 2010

I have just upgraded to Lucid on Ubuntu. I am a long time Pidgin user. I tried using Empathy with Gwibber, but I can't get Gwibber to update my IM status(es) in Empathy, so I want to go back to using Pidgin. (Additionally, I can't get Skype to work with Empathy.)I installed pidgin-microblog and pidgin-mbpurple, and they allow me to view my Twitter feed in Pidgin and update my Twitter status in Pidgin. However, in Karmic, I was also able to specify certain "status availabilities" (one named "Twitter-Available" and one named "Twitter-Away", for instance) to have the IM status message for these statuses become populated with my Twitter feed. This capability seems missing in pidgin-mbpurple in Lucid (and it seems to be the only thing missing from Karmic).

Is there a way to have pidgin-mbpurple update certain "status availabilities" in Lucid (and I'm just missing something) or is this no longer possible?Equivalently, is it possible to have Gwibber update my status message in Empathy? (I just want to be able to update my status once on one of my three computers - and have it propagate to all my other accounts (IM and social networking) and computers).

View 1 Replies View Related

Ubuntu Servers :: MySql Database Won't Start - How To Make It Start

May 4, 2011

I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?

View 9 Replies View Related

Ubuntu :: Run Ureadahead In Background?

May 28, 2010

I would like to run in the background the UREADAHEAD for test speedup

Some of you know a way?

View 4 Replies View Related

Server :: Program With Web Interface To Show My Servers Hardware Status?

Jan 30, 2011

I am looking for a program with a web interface to show my servers hardware status. hdd usage, cpu load, memory etc.

View 2 Replies View Related

Ubuntu Servers :: Logwatch / Sendmail - Error (grandchild 27612 Failed With Exit Status 127)?

Dec 14, 2010

I am using ubuntu server 10.10. Tried to create a cronjob for logwatch/sendmail, but without sucess.
I followed the instructions : URL

When I type :

Quote:

sudo grep CRON /var/log/syslog

I get the result :

CRON[27611]: (CRON) error (grandchild #27612 failed with exit status 127)

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved