Ubuntu :: Server Crash - Periodic X Fatal Errors

Jul 29, 2010

I have been having problems with Xserver crashes (goes into low graphics mode). On inspection of my .xsession-errors file, I get X IO fatal errors 5, 11 and/or 104. Somehow my computer is losing its connection with the xserver (connection reset by peer) What is causing this? Should I post a report to launchpad? This happened before and after a clean install and more often when I opened a full screen game (SDL or OpenGL) Here is my xsession errors after my last crash:

[Code]....

View 1 Replies


ADVERTISEMENT

Server :: CLIENT_OPTIONS Vs ESMTP_MAILER_ARGS Addresses Had Permanent Fatal Errors

Jun 20, 2010

I have gotten sendmail pretty much to work but kept on getting DSN error in /var/log/maillog, and also the following in /var/spoo /mail/root

[code]...

View 2 Replies View Related

General :: X Runs Fine, But Three Fatal Errors?

Feb 10, 2011

I just installed Arch (x86_64). I am trying to setup Xorg. I have not installed a DE or WM yet, I just want to make sure Xorg is 100% first.

I had to edit the xorg.conf myself to direct it to my Intel graphics driver, but now it seems to work perfectly.

Except after exiting X, my terminal reads:

Code:
xinit: connection to X server lost

waiting for X server to shut down xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
XIO: fatal IO error 4 (Interrupted system call) on X server ":0"
after 1011 requests (1011 known processed) with 3 events remaining.
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0"
I'm pretty new to Linux and have no idea what this means! But I'm assuming it's not normal, because it says 'error'.

View 3 Replies View Related

Security :: Malware Potentially Implicated In 2008 Fatal Plane Crash?

Aug 25, 2010

Malware Potentially Implicated in 2008 Fatal Plane Crash in SpainQuote:Investigators looking into the crash of Spanair Flight 5022 at Madrid International Airport on August 20, 2008, killing 154, found that the airline's central computer system used to monitor technical problems in its fleet was infected with malware, according to this news report. The central computer system should have warned the airline that Flight 5022, an MD-82 aircraft, was having repeat mechanical problems.[URL]

View 7 Replies View Related

Ubuntu Installation :: 9.10 / Can't Get Updates / Getting 'crash Errors'

Jan 10, 2010

1 month ago we bought this computer. It has a GS7610 motherboard, AMd Athlon 3000+ with 2 gig ram, Seagate 500Gb HD and that's it.

I installed 9.10 64 bit, and all was flawless. Worked straight away, no troubles at all.

Then it was telling me the HS had bad sectors, so we took it back to the store today, and they said there was no problem. They also said that the vertical fuzzy lines were an OS problem, when we thought it was a monitor problem.

They also said that installing Windows would solve the problems.

Ok, so I went through the motions of trying to install a proper copy of Win7 pro I have here, and that went ok, albeit annoying

So, back to Ubuntu and did a full, clean re-install of 9.10 64 bit from the same CD I originally used that worked perfectly.

All installed, and I am hitting serious troubles.

There is a network connection, and I can ping anywhere with a small packet. Anything bigger, no go. I can bring up google, but no further. I can't bring up Ubuntu.com. I can't get updates, so even if they would correct the problem, it doesn't matter because I can't get them into the box.

It can download some updates, then finds one that it can't swallow and just locks up. I am also getting 'crash errors' that aren't a good thing.

It worked just fine, and now it's not.

I have searched and re-installed for the past 8 hours straight and still nothing.

I have this here box running 8.04 that just keeps ticking flawlessly, so it's not an update issue. I am here, so it's not a network or internet issue. Win7 got the internet just fine (sans sound).

I am almost willing to just accept Win7 without sound because at least it's something more than a non-updatable Ubuntu.

(And FWIW, you name anything that has been already said to fix the problem, I have already tried it at least twice already...)

Just re-installed for maybe the tenth time, and this time, for whatever reason, it is working just the way it was originally, and it even has the static on the screen going flat out, which I would really like to know how to solve...

Even got it dual booting with Win7 without effort.

View 9 Replies View Related

Ubuntu Servers :: After Some PHP Fatal Errors / Php Do Not Working / But Html Is Still Working

Mar 7, 2011

I have very interesting problem after ~10 PHP Fatal error, php 5(latest one) in apache2(latest one) in Ubuntu Server 10.10(with latest updates) just do not work. So if try any php page it's not working(user see white page), but HTML still work fine.What that can be? So only restart apache is help to back php. (we are running Wordpress blog 3.1)

View 2 Replies View Related

Debian Multimedia :: Fatal Server Error:Server Is Already Active For Display 0

Nov 15, 2010

I have got xorg and gnome-core installed. When I put in command startx I get the following message: X: warning; process set to priority -1 instead of requested priority 0 Fatal server error:Server is already active for display 0 If this server is no longer running,remove /tmp/.X0-lock and start again. when I try to sudo Xorg -configure it shows me same message server is ..... lspci shows me the following information 04:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)So what I am doing wrong and how do I get this videocard working with Xorg.

View 7 Replies View Related

General :: Fatal Server Error:PAM Authentication Failed, Cannot Start X Server

Jun 29, 2011

When I am trying to run the Xserver using the command startx I am getting the below mentioned error

xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?

[code]....

View 2 Replies View Related

Fedora :: Fatal Server Error: Server Is Already Active For Display 0

Nov 27, 2010

I have VIA/S3G unichrome IGP video card of 32MB after installing fedora i am getting very worst resolution of 600x400which is completely irritating so please provide me a way out from this problem to use fedorathe solutions i followed and failed are given below

1. Some one told me to change the xorg.conf file but i failed because there is no such file in the given location

2. Some one told me to create it using system-config-display but for fedora 14 there is no package for that

3. some one told me again of using the command Xorg -configure but it said as followed [root@localhost tmp]# Xorg -configure

Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.

[code]....

View 2 Replies View Related

CentOS 5 :: Fatal Server Error: Server Is Already Active For Display 0

Nov 19, 2010

that's my first linux server. on my root is CentOS already installed. when i connect via "Remote Desktop Viewer" i log in with my accout.

then i see the textmode and type in "startx" and "init 5" but nothing happens but i can see this:

[root@server004 ~]# startx
xauth: creating new authority file /root/.serverauth.2896
Fatal server error: Server is already active for display 0

If this server is no longer running, remove /tmp/.X0-lock and start again.

Xlib: connection to ":0.0" refused by server
Xlib: Invalid MIT-MAGIC-COOKIE-1 key
giving up.

[code]....

View 1 Replies View Related

OpenSUSE Hardware :: 11.1 Nvidia Quadro FX-5000 (190.53) - Fatal Server Error: Caught Signal 11. Server Aborting

Mar 3, 2010

I am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:

[Code]...

...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.

View 1 Replies View Related

Ubuntu :: Periodic Maintenance Necessary For System?

Jan 16, 2011

I have just created a periodic maintenance schedule for friends using Windows XP, covering tasks needing to be done weekly, monthly, semi-annually and annually. That set me to wondering what maintenance my Kubuntu system needs. What periodic maintenance do you do?

View 1 Replies View Related

Ubuntu Installation :: 10.04 Server Will Not Boot - Fatal Error

Oct 5, 2010

This box is running 10.04 server, it's been running perfectly for almost 6 weeks. It's only function in life is running MailArchiva which is an ediscovery package, runs very well. Anyhow, yesterday the boss tells me he wants to do something else so the last thing I did was an apt-get update and an apt-get upgrade, no errors were observed, I seem to remember like 8 updates were available, this is what I've normally done in the past to keep it current. The last thing I did after that was shutdown -r now.

This morning I can't get into the box, I reconnected a monitor to it and this is the error I'm getting when it stops after about 9 lines into the boot process;
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.32-24-server/kernel/drivers/crypto/padlock-sha.ko): No such device.
This is a mystery to me, the system is not encrypted. The only stuff that is belongs to MailArchiva. Anyhow someone evidently made off with my install cd so I am downloading another to see if I can repair this but I have no idea what broke.

View 4 Replies View Related

Ubuntu :: Fatal Server Error: No Screens Found

Mar 22, 2011

Ubuntu 10.10 Whenever I try to boot up now I get a command line environment instead of the normal gnome desktop. The first error message that comes up is: "Screens found,but none have a usable configuration" further down: "Fatal server error: no screens found" Any way I can re-configure so it detects my monitor?

View 9 Replies View Related

Ubuntu Networking :: Nx And 11.04: A Fatal Error Occurred In NX Server

May 31, 2011

I'm using with success NX server and client on Ubuntu 11.04 on both side. Yesterday the server crashed and now the client can't connect to it. The client works well because if I try to connect to an other server it works well and if I try to connect to this server with an other user it works well. So I think that there is a problem with my user. I have tried to solve the problem as explained in the details of the error. Unfortunately there is no file /var/log/messages so I can't search the code of the exception.

Code:
NX> 203 NXSSH running with pid: 3877
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.1.0.60 on port: 22
NX> 202 Authenticating user: nx

[Code]...

View 1 Replies View Related

Ubuntu Multimedia :: Fatal Server Error No Screens Found 9.10

Jan 9, 2010

I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.

Resolved the issue of the display, now on to the grub menu.

View 3 Replies View Related

Ubuntu Servers :: 10.04 Server Won't Boot - Modprobe FATAL Error

Jun 30, 2010

I have server 10.04 running, and I modified my fstab file to automatically mount an NTFS partition on startup, but after a reboot, I see that I clearly did something wrong, as now it will not boot. The output is:

[Code]....

init: ureadahead-other main process (923) terminated with status 4 If this is an error with my changes to the fstab file, is there any way I can access is to change it? No matter what i do I can't get it to boot.

View 1 Replies View Related

Programming :: C++: Defining A New Class - Periodic B.c?

Apr 9, 2010

I am trying to make a periodic boundary condition type function, using an existing class given to me in lecture notes, but am having some trouble! Effectively, I am trying to make an array such that, for a point in any row of a 2D matrix ("Matrix(i,j)"), the command "next_i[i]" will return "(i+1)%L", where L is the number of data points in the row. This will enable me to select a point to the right of any point in the matrix: "Matrix(next[i],j)"

[Code]....

View 1 Replies View Related

Ubuntu :: Xorg Messed Up - Fatal Server Error (No Screens Found)

Apr 23, 2010

My issue began with my resolution changing to 800x600 in Karmic Koala and then my inability to change it back to anything else. In my haste to fix it before going to work this morning I loaded a new xorg.conf without backing up the old xorg.conf with data not relevant for my monitor and now I'm in limbo. The good news, I hope, is that I also run 8.04 on the same computer so I do have access to what I hope is proper xorg.conf / I've modified the existing xorg.conf file and I'm still getting the "low graphics mode" message (EE) problem parsing the config file and (EE) Error parsing the config file. Fatal Server Error: no screens found.

View 9 Replies View Related

Ubuntu Servers :: Periodic Ssh Connection And Login Timeout/failures

Jul 20, 2010

A few weeks ago, I upgraded one of our machines to the 64-bit server edition of 10.04. All went reasonably well (after some hoops to get it to properly recognize/mount the RAID + LVM partitions), but one of the things that confounded the installation process was login timeouts. From doing some research, I thought I'd gotten it solved by removing the checks for updated packages on login, but I either didn't get it done, or there's something else going on here.The issue is that the machine is headless and is actually a file & application server, but I do need to connect to it via ssh on a regular basis. However, the issue isn't related to SSH, as it also happens when I try and log in through the physical console too.

What happens is that every so often, login attempts will time out for a period of minutes, then they will suddenly start working again, instantly giving me my expected shell. Again, I suspect it is something with the way the motd junk is being generated, but having a server that prevents you from logging in is totally unacceptable. I've no idea how to go about debugging what happens because I don't see anything useful in any of the logs, and I don't have a way to trace the login process from outside. I'd love to hear what the problem actually is and how to prevent this from happening.

View 3 Replies View Related

Server :: Fatal Error: Call To Undefined Function

May 7, 2010

I had created a database in mysql called guestbook and created tables also in mysql and also granted remote connections privileges from below command

mysql> grant all privileges on *.* to root@192.168.1.222 identified by "rrcrrc";

i had accessed from my pc(192.168.1.222) and used phprunner to create php web pages and copied the phprunner output folder to use with apache. when i accessed from my pc the below error is coming

Fatal error: Call to undefined function: mysql_connect() in /home/administrator/useridall/include/dbconnection.php on line 9

i can't understand what is going on so i put this question in the forum, below is i am giving the dbconnection.php details.

dbconection.php
<?php
function db_connect()
{

[code]....

View 3 Replies View Related

OpenSUSE Hardware :: 11.4 - Getting Periodic Flicker On The Display

Mar 16, 2011

I recently upgraded my desktop to 11.4 and kde 4.6.1 My desktop has : VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200 Series] This is legacy ATI stuff, radeon driver loaded (as was in 11.3) and seems to be operating. I am getting a somewhat periodic (5 secs or so) flicker on the display, fast enough to be annoying but not fast enough to really affect anything.

I have seen several threads about short freezes, but realize that flicker and freeze might be a matter of speed and memory, etc. I tried suspending Desktop Effects, that may have reduced the frequency of the flicker but did not eliminate.

View 6 Replies View Related

Programming :: Write A Function That Shall Execute Periodic?

Sep 1, 2010

I want to write a function that shall execute periodic. means if i set time 1 sec that function should execute in each 1 sec. let us call that function func1. But i dnt want to wait inside the func1 for that 1 sec. Meanwhile i want to run another function say func2 in background . some thing like less priority function. Whnever the time come to execute the periodic function func1 it has to go to func1 and then again in the waiting time , the second function func2 will resume. I wanted to know how to do it.. Can somebody tell me is it possible using signal in linux.

View 6 Replies View Related

Fedora :: Fatal Server Error: No Screens Found Giving Up?

Jul 9, 2010

I installed fedora 10 on my laptop. But I am getting this error when it is booting up:

Code:
Release Date : 5 November 2008
X Protocol Version 11 , Revision 0

[code]....

View 5 Replies View Related

Red Hat :: Fatal Server Error No Screens Found On RedHat 7.1 XFree86

Apr 4, 2009

there are several posts related to my problem but not quite what I want. I don't need any effects to be running nor do I need perfect resolution. I have a PCI-E card Nvidia 8600 gts and I need to run redhat 7.1 for reasons that are not debatable. I also have an onboard ati radeon X 1250 but currently I am running the PCI-E.The installation was successful and ran in GUI, however after installation and reboot, the screen keeps flickering trying to load the desktop.I just need to get the GUI running the same way the installer was able to run in GUI, I tried editing the XF86Config file to change the driver to either vesa or vga but still didn't work. Probing for devices is not an option since the card is not listed and the maximum video ram goes up to 64MB in xconfigurator. It probes my card as a VGA generic with 1 MB ram. I know there is a way to have the desktop load just the same as the installer's gui settings but that's where I need help.

this is after changing all the 'driver' values to vesa. I don't understand why it can't find the screen even though I used the horizontal and vert. sync values for my monitor. Any instructions or advice on how to just get the desktop loaded would be great, I know this is a very old OS but regardless I need for it to work.

View 10 Replies View Related

Debian Multimedia :: Periodic Screen Freezes In Jessie

Apr 15, 2015

For months I've been experiencing periodic screen freezes in Debian Jessie. I've tried many ways to debug/fix it without any luck...

I'm running GNOME 3 in Debian Jessie...
Code: Select all$ gnome-shell --version
GNOME Shell 3.12.2
$ cat /etc/issue
Debian GNU/Linux 8
l

On a ThinkPad X60 with a SSD.

Code: Select all$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)

My screen freezes periodically.

By freeze, I mean that the mouse can still move, but everything else behind it is frozen entirelyI can switch to a terminal with CTRL+ALT+F1, it's ... I guess... X or gnome-shell or something that's frozen? Not the whole OS thoughThese freezes last anywhere between 5 or 10 seconds and 3-5 minutesI can't predict when they will occur, but often, after a suspend/resume, they will start occuring much more frequently. Also, they often happen after I enter my password and press ENTER on the lock screen after a resume from suspend. But not exclusively -- they can happen at any other time when I'm doing pretty much anything in GNOME...

Things I've Tried...

When frozen, I've tried to CTRL+ALT+F1, login, and run gnome-shell --replace... [*[When frozen, I can successfully CTRL+ALT+F1 and run `service gdm restart`... with the obvious downside of losing everything I have open. But the screen responds immediately and I can log back in to GNOMEI tried running `Xorg -configure` to generate an /etc/X11/xorg.conf file to edit, but received an error about not being able to generate configuration for multiple screens or something (I can retry and provide the exact error if this is a useful direction to try) is it the gnome-shell freezing? Is it X? Is it a problem with the X driver I'm using?

View 4 Replies View Related

OpenSUSE Network :: Periodic Interruptions In Internet Connection

Jun 13, 2011

From version 11.3 to 11.4 now often occurs after a problem has already become annoying! My computer connects to internet through a router and sometimes after about 4, 5 hours going through the browser so I cannot reach Google or someone else's server Skype only stays connected!

This is not a hardware problem occurs because even after changing the router and the computer problem remains! When this happens the router has access to the Internet and other computer via wifi can connect without a problem! How to figure out where the problem comes? I attach the output of dmesg:

Code:
[40285.897112] SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=1c:6f:65:81:21:73:00:1e:65:90:c9:a6:08:00 SRC=192.168.1.102 DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=57753 DF PROTO=TCP SPT=44432 DPT=22 WINDOW=4380 RES=0x00 SYN URGP=0 OPT (020405B40402080A001F96780000000001030307)

I checked this code in google and found that a similar prolem had people from the version 10.3 but I do not remember then I had this problem occur examples of 11.3.

View 9 Replies View Related

Security :: Periodic Update Of Tripwire Policy File?

Jul 1, 2010

I have tripwire 2.4.1.2 running on one of our servers on a daily basis, and I was curious to know if it is good practice to periodically update the policy file. The reason for my asking that is while the daily reports that I get indicate there have been changes to files on a daily basis, there are also files that have not been modified for over a month. My thinking is an update of the policy file will establish an updated baseline, and those files that have not been changed for so long will not be reported on until they get changed again.

View 1 Replies View Related

Ubuntu :: Won't Boot Up The GNOME - Fatal Server Error: AddScreen/ScreenInit Failed For Driver 0

Apr 26, 2011

after I installed graphical ATI drivers for my Ubuntu distribution version 10.10 running on a Acer laptop, it told me to restart and since then I cannot boot GNOME. Whenever I start the laptop, I just get a command prompt with username and password. I can browse through my files using changedir and other commands. After logging in I typed 'startx' and it gave me alot of errors:

Quote:

Fatal server error: AddScreen/ScreenInit failed for driver 0
(WW) fglrx: No matching Device section for instance (BusID PCI : 0@0 : 20 : 4) found
(EE) fglrx: No matching Device section for instance (BusID PCI : 0@0 : 20 : 4) found
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work

[code]....

So I really regret downloading these drivers, is there any way to roll back to the old Ubuntu supported video drivers?

View 5 Replies View Related

General :: Slackware 13.1 Won't Boot With Ubuntu Studio - Fatal Server Error: No Screens Found

Jan 1, 2011

I have this old box that I used at school that I wanted to re-purpose and use. So i decided to that I wanted to run xp, ubuntu studio and slackware so I can learn about linux and do some other things with xp. I think I got through the installatiosa all fine and dandy, and I installed grub for my boot loader, I can boot into studio and xp, but I cant get into slackware. the grub boot menu is sorta funky too, it shows a generic and recovery mode for studio which is fine, and then another option for xp, some memory test boot option, but then for slackware it shows "Slackware Linux (Slackware 13.1.0) (on /dev/sda4) four times in a row. If I select any of them they all end up with some error; the third SW [slackware] option down the list of the repeated 4 allows me to sign into root, but when I type "startx" i get :

(EE) intel(0): No kernel modesetting driver detected
(EE) Screen(s) found, but none have a usable configuration

Fatal server error: no screens found

but thats with a lot of other text above that. if you need any more details, please dont hesitate to request for them. I'm going to take some time and cool down. I'm trying to get these three OSes running from one HD. I've partitioned the 80 gig drive as follows

Primary 40 G NTSF for XP
Primary 2G Linux Swap
Primary 16G Slackware
Primary 18 U Studio
Primary

View 21 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved