Ubuntu :: Sensors Applet Always Shows 40C?

Apr 14, 2011

I installed lm_sensors via Synapt & the Sensors Applet on the panel, but that applet shows me an invariable 40�C for 2 temperatures - 'CPU' & 'temp1'.Now I know it can't read the CPU temperature (long story, the CPU fan is hard-wired to 6v & there is no temperature feedback...) but it should be able to find a couple of other useful temperatures.The same PC in XP uses Speedfan which indicates plausible temperatures for (I think) Case & Hard Drive. (Temp2 & HD0 in the attached)I wonder what I have failed to do & why I cannot see Case or HD temps in Ubuntu?In terminal, I ran sensors-detect which went OK until the last bit where it said:

"~$ /etc/init.d/module-init-tools start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service module-init-tools start...etc" I don't follow that, but I have checked that I have it87 in both /etc/modules & in lib/modules/.../hwmon

View 3 Replies


ADVERTISEMENT

OpenSUSE :: New Motherboard - Command "sensors" Shows "no Sensors Detected"

Mar 17, 2010

I just recently changed my motherboard, and now the command "sensors" shows "no sensors detected" I ran sensors-detect but still i get no sensors detected.

View 9 Replies View Related

Ubuntu :: Can't Seem To Get Lm-sensors Display / Applet

May 6, 2010

I had previously installed lm-sensors and the associated files on my Lattitude 2100 when I was running 8.10 and got a great little bargraph readout thing at the bottom of the screen that helped me monitor system temperatures. Now that I've upgraded to lucid lynx netbook, I can't seem to get the same thing going. I installed the lm-sensors etc. but the applet/readout/display whatever you want to call it, is nowhere to be found.

View 8 Replies View Related

Ubuntu :: Sensors / Remove Applet From Panel

Jun 3, 2010

I installed Sensors Applet & hddtemp. Installation was smooth, all of my devices were automatically detected and all seemed good.Then I restart the computer, and when everything comes back up, the processor, MB, and GPU are all working (showing a temperature) but none of the (6) hard drives are showing a temperature. After fiddling around with it I found that removing the applet from the panel, and then adding it back again fixes the problem. But then the next time I restart the computer it breaks again.

View 1 Replies View Related

Ubuntu :: Sensors-applet Fail To Display Hd Temp After Kernel Upgrade

Jun 30, 2010

After Kernel upgrade, sensors-applet doesn't display the hd temp. To fix the problem I have to remove and after reinstall hddtemp package.

View 5 Replies View Related

Debian Configuration :: Gnome Sensors-Applet - No Nvidia GPU Temperature

Jun 3, 2010

I have Debian Squeeze with Gnome "sensors-applet" installed.I have a Nvidia 7300GT GPU whose Thermal Monitoring(Temperature) is Shown fine on "nvidia-settings" GUI. But ,Sensors Applet in Debian shows only CPU temp and if I install hddtemp,it will show hard disk temperatures.

I ended up rebuilding the package from debian source enabling nvidia support.and it worked(with "DEB_BUILD_OPTIONS="--enable-gui --with-nvidia" Has Any Work Around to show nvidia GPU temperature without rebuilding the package ?PS:Below is a screenshot of nvidia GPU temperature showing in the top panel(of Gnome). sensors-applet_nvidia.png (5.5 KiB) Viewed 518 times

View 1 Replies View Related

Ubuntu :: Lm-sensors Will Not Detect Any Sensors On HP Desktop

Mar 3, 2011

I can't for the life of me get the xsensors to work. I installed lm-sensors, the applet and also xsensors.I followed everything on this guide:URl... Went through it more than twice and a couple of restarts. I just can't figure out what's wrong.When I run "sensors" nothing is found. I ran the sensors configuration and it only found one device to add to /etc/modules. Please see the trace below, I would be very grateful if you can help me find the fix for this! The desktop is an HP Pavilion a730n with a Pentium4 processor.

View 3 Replies View Related

Ubuntu :: Gnome Clock Applet Shows Time One Second Behind?

Apr 17, 2011

I recently noticed that the time displayed in the Gnome Clock applet is exactly (or nearly so) one second behind NTP time.I have a NTP server on my small network to which I sync my other PCs. Some of the applications I run are critical of time and need sub second accuracy - I am also a bit of Time Nut as well.My NTP server is OK. My PCs can sync to my NTP server OK. My applications which require precise time get the right time from NTP - BUT - the time displayed in the GNOME Clock applet is always behind one second!I have spent much time searching for others with similar problems and their solutions but so far nothing - hence my asking here, why do I see this behaviour and what can I do about it

View 2 Replies View Related

Software :: Gnome Applet That Shows Hd Access?

Oct 21, 2010

im looking for a gnome applet, that shows the hd access as "lamps", which means one "lamp" should sign write access and one "lamp" shows read access. Im not interested in a graph which shows the amount of data is being transferred (as the sysmon applet does).

View 1 Replies View Related

Ubuntu :: Indicator Applet Shows Nothing, Shutdown/restart Broken?

Jul 20, 2011

For reasons that I do not understand, the xfce indicator applet has stopped working. It's not visible, so I cannot see thinks like the wireless applet.I can't find anything from searching the net.I suspect that it has something to do with dbus.Perhaps it's related, but whenever I choose to shutdown or restart, it now goes back to the GDM login screen instead. I've had this problem before on earlier Ubuntu distros, but I don't remember how to fix it.

View 2 Replies View Related

Ubuntu :: Applet Which Shows The Total Data Usage (In+out) (of The Current Session Or Since The Uptime) On The Panel?

Jul 7, 2011

I need applet which shows the total data usage (In+out) (of the current session or since the uptime) on the panel.I searched a lot, but everytime I had to click somewhere to see my data usage. I don't want that. I want my data usage displayed regularly on the panel.

View 9 Replies View Related

Software :: Lm-sensors Does Not Find All Sensors?

Jun 21, 2010

I would like to use lm-sensors with my new PC.With my old one lm-sensors showed all sensors of CPU, GPU, wattage and Fan.With the new AMD64 (kernel 2.6.32-5 on Debian Squeeze) I get only the temperature of the GPU and the HDD.The only found sensor is "Fintek F71882FG/F71883FG Super IO Sensors"No embedded "AMD [...] thermal sensors" found in sensors-detect How can I fix it?sensors-detect

Code:
#
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)

[code]...

View 3 Replies View Related

OpenSUSE :: Update Applet Shows Firefox 3.5.9 Security Update, But 3.6 Already Installed

Apr 14, 2010

How can I make the security applet stop showing an update for firefox 3.5.9? I have a more recent version installed from mozilla repo: firefox 3.6. The mozilla repo already has a higher priority (95 instead of 99), so I don't know what to do.

View 5 Replies View Related

Debian :: NetworkManager Applet Shows No Network While Connected - Wired Network Device Not Managed

Oct 30, 2010

I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says

"Wired Network Device not managed"

While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.

View 14 Replies View Related

Ubuntu Installation :: Can't Move Indicator Session Applet To The Right Of The System Date/clock Applet

May 6, 2010

I thought I was removing the chat status piece of the indicator applet (I know what it is now, didn't then), but I accidentally removed the whole thing. Now when I figured out how to put it back on the panel, I can't get it back to where it was (which was to the RIGHT of the system date/time applet). How can I do this as well as move the indicator applet that has the volume control in it?

View 4 Replies View Related

Ubuntu :: Can't Get Indicator Applet And Session Management Applet Working

Jul 9, 2010

After some updates I can't get indicator applet and session management applet working, I get these instead:

I tried to pull back any updates, but it changed nothing. I installed older (lucid) versions of these packages:

Code:
indicator-applet
indicator-applet-complete
indicator-sound
indicator-applet-session

[Code]....

View 9 Replies View Related

Ubuntu :: Conflict Between Indicator Applet And Notification Area Applet?

May 15, 2011

I was using both the Indicator Applet and the Notification Area applets in my panel but realized that very often when I started the system, the icons of these applet appeared mixed. Some items were duplicated (for example the keyboard indicator) where others were missing (sometimes the battery indicator, sometimes the sound indicator, etc). When that happened I had to remove them and add them to panel again.

This seems to be a bug that makes one applet interfere with the other (maybe because there are some items that appear in both but when you add both initially nothing is duplicated but after a system restart the problem happens).After searching for some way to fix this apparent bug without success I decided to remove the Indicator applet and keep just the Notification Area.

It works but then I don't have the sound applet anymore, because it was part of the Indicator Applet.
I searched for a standalone sound applet but I couldn't find any. Do you know of any such applet that I could install in the system? If I can find any it would be fine to me and I would be satisfied using just the Notification Area.

View 1 Replies View Related

Ubuntu :: Lost Indicator Applet Or Mail Applet?

Dec 21, 2010

Had ubuntu for a few years left came back last month. I lost the indicator applet in the panel. I don't know what I did to get it back. I feel like this is a very very simple thing to fix but I just can't find it. Here is a pic of what i'm talking about.

View 3 Replies View Related

Fedora Networking :: Network Manager Applet (/usr/bin/mn-applet) Needs Default Keyering

Dec 5, 2009

I use network manager applet 0.7.1. I had set the automatic wireless connection to my my wireless network (WPA key secured). Recently, I get the following problem: At the automatic connection, I get the message: Network manager applet (/usr/bin/mn-applet) needs default keyering. As I don't know what it is to type it and then, deny or OK, it doesn't get connected to my wireless network.

View 5 Replies View Related

OpenSUSE :: GNOME Network Manager Applet Cant Export Vpn Configuration (nm-applet)?

Mar 28, 2011

I cant use the option "export" from the VPN settings in the Gnome Network Manager, when I tried to export a popup says "Unknown error"This happend also in 11.3 and now in 11.4, so it is a nm-applet problema I think... Is there any other way to export my VPN connections?

View 5 Replies View Related

Ubuntu :: Restoring Nm-applet To 10.04 Indicator Applet?

May 3, 2010

I removed the "indicator applet" from the default gnome panel at the top of the default Lucid desktop. Doing so resulted in me losing the ability to control the sound from the panel, which I value so I put it back.Once I restored the indicator applet to the panel, the nm-applet went missing. I'm still connecting to my home network with no problem, so the function is there, but the little icon that updates when you're trying to connect, shows signal strength, and other available networks is now missing. This I've searched the problem and haven't found any solutions that work, I think because of the new applet integration, but I'm very surprised this hasn't been found by someone yet!

View 9 Replies View Related

Networking :: Connection Manager Shows Wired Connections And Shows Wireless As Being Disabled

May 2, 2010

My connection manager shows wired connections and shows wireless as being disabled. here is some terminal info getting wireless going?

Here is a bunch of things I have tried and the results.

nixon@nixon-desktop:~$ sudo ifup wlan0
Ignoring unknown interface wlan0=wlan0.
nixon@nixon-desktop:~$ sudo ifdown wlan0
ifdown: interface wlan0 not configured

[Code].....

View 9 Replies View Related

OpenSUSE Network :: Firewall Yast2 Shows Ports Open, Nmap Shows Them Closed?

Jan 8, 2010

I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):

Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp

[code]....

View 9 Replies View Related

Ubuntu :: Add Nm-applet To Indicator Applet

Jun 21, 2010

the network manager applet is in the notification area on the gnome panel. I was wondering if it's possible to move it to the Indicator Applet?

View 1 Replies View Related

Ubuntu :: Sound Applet Dependent On Unwanted "notify" Applet

Apr 27, 2010

Lucid has this (opinion: stupid) notification applet in the top right that contains links and notifications for the default evolution etc setup. I do not want that applet and would prefer to run what I want via alltray. The problem is that removing the notification applet removes the sound applet! Firstly, how do I "unmarry" the two? secondly, who could have possibly thought that was a good idea? Ubuntu has been great, but c'mon! Why is a default email program married to the sound applet!

View 2 Replies View Related

Fedora :: Java Based Chat Or Drawing Site Doesn't Load The Applet - "Start: Applet Not Initialized"

Mar 10, 2011

I'm having trouble with my java, I got it to isntall, restarted but when I go to any java based chat, or drawing site it doesn't load the applet, the applet shows up it just says "Start: Applet not initialized"
Did I install it wrong?

View 4 Replies View Related

Ubuntu :: Im-sensors Detect Only Coretemp?

Jan 14, 2010

i moved on ubuntu 9.10 Karmic, before on 9.04 All sensors work fine but now only "coretemp".so ran "sudo sensors-detect" and output result is:

Code:
#----cut here----
# Chip drivers

[code]....

View 2 Replies View Related

Ubuntu :: Changing Fan Speed With Lm-sensors?

Dec 6, 2010

control my cpu fan speed? It's really loud, and I'm not stressing the CPU at all, but it seems to be running at 110% all the time.

I've tried going through some old posts related to lm-sensors but nothing seems to work.

I'm using an Asus motherboard (M4A88TD-M), an AMD 1075t six-core processor, and I have Ubuntu 10.10 installed. Ive run sensors-detect, followed the onscreen prompts... the output looks like this:

Code:
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: System manufacturer System Product Name
# Board: ASUSTeK Computer INC. M4A88TD-M EVO

[Code]....

View 9 Replies View Related

Ubuntu :: LM Sensors - Cannot Find CPU Temperature

Dec 29, 2010

I have tried lm-sensors and a few others, firefox just crashed.
Phenom II X6 1090T
MSI-890FXA-GD70 motherboard
Ubuntu 10.10

Senors:
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0C (high = +70.0C)
sensors-detect

Now follows a summary of the probes I have just done. Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 10h thermal sensors' (confidence: 9)
No modules to load, skipping modules configuration.
Unloading i2c-dev... OK

There is a debugging panel on my motherboard, and I think that that displays the CPU temperature, although I am not sure.

View 6 Replies View Related

Ubuntu :: Sensors Not Working & CPU Speed Control?

Feb 21, 2010

I installed Karmic 64-bit on a new Phenom X4 Quad-Core PC. I've replaced the stock CPU cooler with a Cooler Master Hyper TX3, enabled all fan control settings in the BIOS, switched their profiles on silent, enabled the Cool n' Quiet option as well but my CPU fan is still noisy and seem to be running up to the max number of RPM, thus ignoring BIOS specifications. Besides this I can tell there is something wrong with it since even the CPU is on idle or with just the regular browsing, media player operations, PC sometimes freezes or is automatically rebooted .

I installed lm-sensors and went through all the sensors-detect operations (output attached to this post) but it doesn't show anything else but the CPU and HDD temperature which is always 40 Celsius degrees.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved