Ubuntu :: Read Nsf File - Lotus Notes

May 13, 2010

I use Windows XP and Ubuntu 10.04 using Dual Boot in my notebook, but the company that I work support just the Windows XP. I work with Lotus Notes on Windows and I wish read nsf file on Ubuntu. As long as I know I should by Lotus Notes license for linux.

I want a software just to read nsf file in order to can see my e-mails storeds. Anyone knows some program for read nsf file?

View 2 Replies


ADVERTISEMENT

Ubuntu :: Lotus Notes 8.5 On 9.10 Karmic X64?

Apr 1, 2010

I am trying to get Notes to run on Ubuntu 9.10 karmic x64 and haven't had any luck. I started off by following the steps from the following location [URL] This didn't work and I had the symptoms listed below. I then looked at the following guide and did all the steps that were not on the above link: [URL] However I still had the same issue. So the symptoms:

1) I don't see notes in the apps->office menu, but I am able to start it via:

cd /opt/ibm/lotus/notes/framework
../notes

2) I get the login window and am able to go through the setup (pointing to the notes id file, and my domino server etc). However at the end of it all, no GUI is displayed. Even though lnotes shows up in the running processes.

3) In the terminal window I get the following error:

Gtk-Message: Failed to load module "canberra-gtk-module": /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so: wrong ELF class: ELFCLASS64
(:6077): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so: wrong ELF class: ELFCLASS64
(:6077): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libmurrine.so: wrong ELF class: ELFCLASS64

[code]....

View 2 Replies View Related

Ubuntu :: Lotus Notes 8.5.2 On 10.04 64bit?

Aug 27, 2010

With the release of Lotus Notes 8.5.2, it looks like Ubuntu 32bit support is there, however I am running 64bit Ubuntu 10.04.

I had 8.5.1 (32bit) installed and it was working fine. I did take alot of tweaking to get it running.

Just wondering if anyone has tackled the new 8.5.2 which is supposed to be much nicer in Ubuntu.

I've tried removing the old 8.5.1 and the install for the 8.5.2 doesn't really work correctly even with "--force" commands.

Always a challenge with Notes and Ubuntu Why they didn't make 64bit debian packages is beyond me.

View 2 Replies View Related

Ubuntu :: Lotus Notes 8.5.2 On 11.04 64 Bit Installation

May 6, 2011

I tried to install Lotus Notes 8.5.2 (deb package) on Ubuntu 11.04 64 bit. Unfortunately, Lotus is not able to complete the installation! I googled and I found a guide on IBM forum (but for 10.04 release) and on [URL], I installed required dependencies (ia32lib, all getlibs, ecc) but I am not able to continue the installation. I tried to install in different Ubuntu release. Here a summury:

- Ubuntu 10.10 64 bit: Lotus Notes and FP2 install and works fine
- Ubuntu 11.04 32 bit: Lotus Notes and FP2 install and works fine (also in Unity environment)
- Ubuntu 11.04 64 bit: Lotus Notes cannot install.

[Code]..

View 6 Replies View Related

OpenSUSE :: Install / Run Lotus Notes 8.5 / 8.5.1 On 11.2

Nov 20, 2009

I am running Lotus Notes on top of openSuSE since 10.3 and version 7 of Lotus Notes. The last packages provided by IBM (8.5 and 8.5.1) provide a smooth and easy way of installing it through rpm packages. Some issues had appear and I solved them (or lived with ), but this time I did a full fresh install of 11.2 64bits. I then install the brand new packages of Notes 8.5.1 and had the following problem : The Notes GUI wasn't able to display some elements of the interface (i.e. small view of calendar, search bar, popups, Notes basic settings in the properties etc...). Searching by big blue, I found out a solution for Ubuntu that I customized for openSuSE 11.2 64bits.

Step one : Install Lotus Notes: Have a copy of the .tar package from IBM. untar it into a new directory. With YaST add the directory to the repositories Install all the packages provided (the ones with Symphony are really optional).

[Code]....

View 8 Replies View Related

Server :: IBM Lotus Notes Installer Can't Run In Graphical Mode?

Aug 20, 2009

I am trying to launch the IBM installer on RedHat ES 5.2 and getting "the installer is unable to run in graphical mode". I am able to do xclock and made sure the export Display=:0.0.

View 3 Replies View Related

Ubuntu Installation :: Lotus Notes 8.0.1 - Unable To Show Mail With 9.10 Karmic

May 3, 2010

I install Lotus Notes 8.0.1 on Karmic Ubuntu 9.10, the setup is successfully. However, the mail could not show correctly. the Home shows blank. The mail address could not show for each mail. And some html mail could not show at all.Below are the console output.

05/03/2010 03:42:49 PM Lotus Notes client started
2010/05/03 15:43:15.532 SEVERE err.csilabelprovider.fetchimage.exception ::class.method=com.ibm.rcp.csiviews.providers.CSIL abelProvider$1.run() ::thread=Worker-5 ::loggername=com.ibm.rcp.csiviews.providers.CSILab elProvider

[code]...

View 1 Replies View Related

OpenSUSE :: After Installing Lotus Notes 8.5 - Couldn't Find Any Shortcut To Run It

Feb 22, 2010

I tried to install Lotus Notes 8.5 client on my opensuse 11.2 machine, the installation process goes smoothly but i couldn't find any short cut to run the software !!! nor in the desktop neither in the Recently Installed sub menu !!

View 7 Replies View Related

Ubuntu :: Names Tomboy Notes Application Gives To Notebooks And Notes?

Mar 21, 2011

Can anyone tell me what names the tomboy notes application gives to its notebooks and notes? Not the file format (xml) I found that on the web, but the filenames and directory where it stores things.

View 2 Replies View Related

General :: Windows Access The File From Ubuntu Got Read Only Even Though Have A Full Permission To Read, Write And Execute The File?

Feb 4, 2010

What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.

View 1 Replies View Related

Ubuntu One :: Cannot View Notes Via Web And Sync Notes

Mar 14, 2010

I'm getting a "Server Error Something has gone wrong (500)" when i try to access the notes page for several days now. When will it be OK?

Bug report:[URL]

Just now:

Something has gone wrong (500) This is a robot

We've recorded this problem and it will get investigated with the logs. If this problem is urgent, please file a bug report and include this number: OOPS-ID-1534appserver79128

View 8 Replies View Related

General :: Saving Notes Against A File ?

Sep 22, 2010

I want to save notes against a file on linux... i want to save meta data about a file..because the file names are restricted in max length...So how to save notes or comments about a file on linux so that it gets saved along with the file itself...I used the notes tab in the file properties dialogbox.. but that way the notes stick to the file only on that OS only.. if i open that file in another linux os.. those comments/notes are gone...Way to embedd these notes into the file so that i dont lose them ever..At lease a solution that makes this possible on switching linux distros. if its not portable enough that these notes stick b/w windows and linux its ok for me.. but atleast if i format my linux os.. atleast i shouldnt lose those important notes..and be able to access on newer linux..

And i also have no idea if this notes tab was implemented to be linked with the OS only.. i dont see much use of it.. and a normal user also has noway to know this.. i also came to know on superuser chat from a buddy.. @Sathya ..this thing is more useless especially if u use ubuntu which has 6 months timeline..and crazy people like me who are always eager to upgrade their os as soon a new one is available..and any way i can search these notes from the terminal?

View 3 Replies View Related

Ubuntu One :: Location Of File That Stores Notes Screenlet Text

May 4, 2010

I am no programming expert, but there must be a file that the Notes screenlet is storing all my notes on ( im not talkign about tomboy). If I can just find this file and then Share the file, i will be able to sync my notes between my computers. Correct? So anyone know where this text file is so that I can sync it.?

View 2 Replies View Related

Ubuntu :: Copy Old Notes From My Old Disk To New Disk - Where Does Tomboy Saves Notes ?

Jan 14, 2010

i have switched disks and i want to copy my old notes from my old disk to new disk.so which folder does tomboy saves data so i can copy them over?

View 3 Replies View Related

OpenSUSE Multimedia :: Release Notes Flash Player 10.2 Release Notes?

Feb 9, 2011

release notes Flash Player 10.2 Release Notes

View 9 Replies View Related

Ubuntu Installation :: 64-bit 10.04 Won't Let Lotus Symphony Install

May 6, 2010

Despite the force parameter and instructions provided by IBM and despite what I've read in the press about a close collaboration between Ubuntu Symphony camps, this will not install. Oddly enough you can install 32-bit software under 64-bit OpenSuSE without a problem.

View 3 Replies View Related

Ubuntu :: Fix The White Background In The Notification Area ( Lotus )?

Oct 31, 2010

I have an ugly view of my notification area due to i installed the last version of Lotus Symphony 3. Now, my notification area show like this:

Is it a bug from Lotus Symphony or from Ubuntu? By the way, the icon of Lotus is a .png file with transparent background.

View 9 Replies View Related

Server :: Migrate DB From Lotus To MySQL?

Sep 11, 2009

I need to migrate data from Lotus Notes (LN) to MySQL system. I googled around, but didn't find much information about it. The LN has an option to export data like Lotus 1-2-3, which allows you to open the data into excell, but nothing apparently to MySQL. I also opened the MySQLMigration-ToolKit. In the import DataBase System, it doesn't appear LN as an option of supported systems. We are trying to keep things using freeware and cross-platform, although sometimes providing final customer products that run on MS. There is any tool available around, or should we go and code the routines to read the tables from Lotus to MySQL using a programming language like C?

View 3 Replies View Related

Ubuntu :: Unable To Create Trashing Info File: Read-only File System

Jul 21, 2010

I plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message

Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system

So when I click on delete I get another error message:

Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system

At this point I can only click on Skip, Skip All, or Cancel.

I have not changed anything on the stick recently so I dont know what is causing the problem.

View 7 Replies View Related

Ubuntu :: Shell, Auto Append Number To File And Read From External File?

Oct 31, 2010

Code:
cat ${SOURCE}/{start,universal,index,end}.txt > ${SERVER}/index.html
cat ${SOURCE}/{start,universal,02042010,end}.txt > ${SERVER}/02042010.html

[code]....

View 3 Replies View Related

Ubuntu :: Samba - Windows Read Files From A Home File Server With An Ext4 File System?

Jan 28, 2011

Can windows read files from a home file server with an ext4 file system? or do I have to partition the drive with the server (ext4) and an ntfs partition with the files on?

View 4 Replies View Related

Software :: Finding An Agenda Lotus Clone Or Similar Using GTK?

Feb 6, 2011

finding an Agenda Lotus Clone or similar using GTK?

View 6 Replies View Related

General :: Read .gz File Direct On Shell/terminal Without Decompressing The File?

Dec 9, 2008

How can I read .gz file direct on shell/terminal without decompressing the file?
satimis

View 5 Replies View Related

Programming :: Splitting A File Based On The Values Read From An Input File?

Jul 27, 2010

I am splitting a file based on the values read from an input file. The below one is the script.

1)How do I add the header which is present in the original file to the new split files created?(For eg. pharmacyf conatins header as table column names. The new files created (ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat) are without the header).

2) Also the script is creating 0 byte files for the pharmacyids which are not available in the intial file? Can this be avoided?

for pharmacyf in *
do
tablename=`echo $pharmacyf |cut -f4 -d'.' `
while read pharmacyid
do
grep -w $pharmacyid $pharmacyf >> $OUT/ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat
done< inputfile
done

View 2 Replies View Related

Fedora :: Cannot Create Regular File Read Only File System?

Jun 16, 2009

All my torrents go to my home/username/Download/ folder, I could read/write yesterday but now I cant even copy the files to a flash drive.The error i get is "Cannot create regular file '/home/username/Download/file' : Read only file system.

View 14 Replies View Related

General :: Error - No Such File Or Dir. Read The 'readme' File But Cannot Configure

May 23, 2011

i'm new to linux and i am running ubuntu 11.04.i'm trying to install wine. i downloaded the binary files and extracted them. i tried running the command './configure' and got a error saying :no such file or dir. i read the 'readme' file but cannot configure.

View 3 Replies View Related

Red Hat :: Installing Lotus Domino On Server - Can't Access Webmail And POP3 From Internet

Aug 29, 2010

I'm installing Lotus Domino on Linux Server. Did anyone know how to reverse proxy for HTTP and POP3/IMAP on linux ? I've problem when try to open webmail from internet. I can't access webmail and POP3 from internet. Seems because connection from internet can't directly to Domino through Firewall. If using apache seems no problem with the webmail, but POP3 still can't access.

View 5 Replies View Related

Security :: File Permission - Read An Execute Only File

Dec 16, 2009

Suppose I have a binary program with only execute permission enabled for the current user. How (in general) would I be able to obtain a core dump of the file? I think I have read it somewhere but I want to know if there are more ways of doing it.

View 1 Replies View Related

Programming :: 3D Array In MAT File ->DAT File To Read In FORTRAN?

Jul 2, 2009

Alright, so I have been trying to resolve this issue for awhile, but now feel like help is very necessary.I have a 128(by)128(by)128 array in a MAT file, and am using the following MATLAB script to convert it to a DAT file:

load C_42.mat
fid=fopen('C_42.dat','wt')
fwrite(fid,Nu)

[code]...

View 2 Replies View Related

Ubuntu :: Error Creating File System: Helper Exited With Exit Code 1: Cannot Open /dev/mmcblk0p1: Read-only File System

May 2, 2010

I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.

"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"

Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved