A friend whom I turned on to Ubuntu with 9.10 recently connected a projector to watch a movie off her laptop. When it was connected, the laptop screen changed and it was clear that desktop effects through compiz were disabled. Thing is, since disconnecting the projector, I cannot get the effects back.If I go into Preferences - Appearance and click to enable Normal or Extra Visual Effects, the same thing happens. I.e. I get a popup saying Searching for hardware driver...and after about 20 seconds, the screen flashes a bit, and says
Desktop effects could not be enabled. Not sure why it's searching for a hardware driver. The computer doesn't require any 3rd party hardware drivers to be enabled - it doesn't have an nVidia card or anything like that.If it makes a difference, she yanked the VGA cord out without setting the display mode back to just her laptop with the FN and F key combo.I've tried:
-Tinkering with options under Preferences - Display
-Ensuring that nothing is available under Preferences - Hardware Drivers
im using awn as my dock, and i'd really like to get some themes going to make it look a little nicer. when i go to the themes tab, it tells me "You need to enable desktop effects (compositor) to apply and customize themes".So in compiz how do i go about enabling them?
I have a Dell Latitude D520 with an Intel 945GM Integrated Graphics Card. I have been unable to get the desktop effects to work in either Jaunty or Karmic. When selecting Normal/Extra/Custom, I get an error:
Code: Desktop effects could not be enabled Graphics card info: Code: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 942/940GML Express Integrated Graphics Controller (rev 03) I've looked at countless threads pertaining to this issue, but nothing I could find resolved my issue.
All 3d applications run with a solid black screen, and compiz will try to revert to the fallback wm, even though I have the new nouveau/gallium setup in 10.10.
glxgears appears to *think* it has a working screen, but it stays blank:
Code: Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. 3570 frames in 5.0 seconds = 713.841 FPS 3298 frames in 5.0 seconds = 659.541 FPS
I'm on a Sabayon Linux install, and the Sabayon forums and stuff have NO idea what I'm talking about and keep giving me "facepalms"
So in Ubuntu I could enable desktop effects and simply use my metacity themes.
In Sabayon, when I enable Compiz, it changes my window theme manager to Emerald. I want to use metacity, not Emerald. They kept telling me it wasn't possible when I used Compiz effects and Metacity together all the time.
I've been running an emerald theme in compiz for few months now and everything was running fine when a couple days ago VLC started acting weird and playing little static clicks every few seconds. Then the next time I booted up after an initial second of flashing my full desktop the screen blanked off a section on the left and bottom of my screen. When I logged in docky told me it was having trouble with the compositing, but when I scrolled over the spot where my docks are they were there. My arrow can be seen in the black areas as can the start panel when I scroll over it, but aside from that it is black and when I open I window the blackness covers it in that part. None of my compiz effects seem to be working.
I am running a pretty basic motherboard and I know basically nothing about this kind of thing but I looked up the built in integrated video card online : ATI Radeon - HD3000 Graphics, On Board Graphic Max. Memory Share Up to 512 MB. I have an ATI driver installed but when I look at my drivers it says it is installed but not currently in use. When I look at my visual effects page it is on none, so I tried changing it to normal and it says the effects can't be enabled. I am running a dual boot with windows and when I go into windows there doesn't seem to be any problems. I am running a Biostar A760G M2+, an AMD AthlonII x4 and running Ubuntu 10.04.
Still new to Ubuntu, and I've installed it on my laptop tonight (Alienware M11x, Ubuntu 11.04). I've got it pretty much how I want it, but I'm stuck with a CCSM/Compiz question.I have Compiz installed, along with the extra plugins (burn, etc).However, when I try to enable any effects, I get nothing as a result.I've rebooted, enabled both Gnome and KDE compatiblities, etc- nothing will work.I'm still learning the ins-and-outs of the terminal/command line system.
So I was messing around on my laptop this morning and I noticed that my desktop effects were turned off. So i decided to turn them on but as soon as i pressed the "normal" option a pop up opens up and says "searching for drivers" then the screen flickers and finally it tells me "desktop effects cannot be enabled". Also my compizconfig wasn't functioning. for exmaple: I turn on wobble windows and nothing happens. No wobble windows.
Having that old problem with the mouse theme defaulting to the old fugly default when compiz effects are on and while over the desktop area. I tried following: http://ubuntuforums.org/showthread.php?t=820245 there is absolutely nothing like that in General>General Options in ccsm. Nothing in simple either.
I hope this is the correct section. I have recently updated to 10.04 and now Compiz/desktop effects wont work. When I try to turn visual effects on I get a message saying they could not be enabled. I'm a bit new to all this so not sure if I'm doing something wrong.I've looked at many threads regarding this problem and nothing they say has worked. iv tried using Hardware Drivers (in systems administration) but this says "no proprietary drivers are in use on this system".
Also I don't know whether this effects anything but when I open NVIDIA X Server Settings (in systems administration) i get a message saying "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."Does anyone know how I can get Compiz/desktop effects working?.
I havent used Ubuntu in a while, so I get version 10.04.1 and when I get compiz, I am missing lots of compiz effects. Like fire, 3d windows, changing how many side are on dektop cube. The skybox doesnt rotate with the cube, when it should.
As the title said, my compiz effects are sometimes blinking, like when i rotate my cool cube it suddendly for some miliseconds it becomes transparent or something like that, and looks very ugly and very annoying, cuz it's very quick and looks so not smooth and clean. I've upgraded from 10.04 to 10.10 . I didn't had any problems like this. I also use emerald.
I am unable to run compiz or set any advanced desktop effects in my Ubuntu 9.10 running under VMware Workstation 7.1. This is the output of the compiz command:
Checking for Xgl: not present. xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log No whitelisted driver found aborting and using fallback: xterm no xterm found, exiting
I've been running Ubuntu on my laptop for a couple months now and I've been using compiz settings manager. For some reason I can't seem to get the window effects for minimizing, closing, etc. to work. I have followed a few tutorials and nothing seems to make any difference. As far as I can tell, that is the only thing in compiz that is not working. I am running Ubuntu 10.10
Not quite sure what could be wrong here. The settings are enabled, but none of the compiz functions are working. The were working on Friday. I did some searching but I'm not even sure what the problem is, or how to diagnose it. I'm running 10.10, now.. any help is appreciated. Even if you just tell me what I need to be searching for to find a solution.
After rebooting, the first message i've been shown was: "Your hardware doesn't support Unity". First strange thing: Unity was working perfectly on all the Beta live versions I've tried before the upgrade.
Well, not a big problem, I didn't really like Unity. Let's stay with Gnome + Compiz, I said.. but Compiz effects don't work anymore. When I try to do System --> Preferences --> Appearance, the "effects" tab doesn't show anymore. The file named "screenshot1.png" will show you this problem, even if it's in Italian: there are only the Theme (tema), Background (sfondo) and Fonts (Tipo di carattere) tabs. Also look to the strange, fuzzy right corner of the themes previews. This didn't happen on 10.10. 3d rendering should be working, since I get
Code: glxinfo | grep rendering direct rendering: Yes But nothing works.
System->Administration->Hardware is empty, but it has always been empty, even on 10.10 (but Compiz effects were working). When I try to set Compiz as windows manager in Compiz Fusion Icon, sometimes the title of the windows disappear, along with the minimize, maximize and close buttons. Do you think there's something I can do to fix all these things?
When trying to set up desktop effects with Compiz I get this message: Accelerated 3D graphics is not available Desktop effects require hardware 3D support.
I have used Fedora 10 last year and the 3D effects worked fine. I have a Nvidia Geforce 6100 video. I also have another hdd on the PC with Mandriva 2010 which I use and the 3D compiz effects work fine. I'm running Omega 12. Isn't it Fedora 12 w/ codecs added? isn't video detection the same?
I just installed 10.04 Lucid.There were some animation effects in the compiz config settings manager which were to add extra features such as burn,glide and a whole lot now they are not in this compiz any ideas?
I am running Ubuntu 10.04 as a guest on virtual box installed on windows 7. I have installed gtk-recordmydesktop(rmd) using synaptic package manager. rmd do not recognize any window when I use the 'extra' visual effects i.e. compiz effects.
A few days ago, I did a clean install of Ubuntu 10.10 onto a Mac. I dual-installed with Mac OS, and everything appeared to be going very smoothly. until I connected to an external monitor (a video beamer I use in my classroom). This led to:
a) the external monitor apparently being considered the primary monitor, and
b) compiz effects being disabled.
I addressed (a) by modifying the file monitors.xml in [me]/.config. (Before that. I had created a startup entry xrandr --output LVDS1 --primary. That also seemed to work; after changing monitors.xml, however, I disabled that startup entry, as it now appeared redundant to me.) Generally and for all I can tell, my actual computer screen is now correctly identified as the primary monitor -- from the moment I log in, at least. The log-in screen itself, though, appears on the external monitor, or not at all when that monitor is turned off.
This is the content of my monitors.xml file: I have not found any solution for (b): when I physically unplug the external monitor and reboot, compiz will run again; but once I plug in the external monitor, it won't.
Im a new member here.So please don't get mad at me.If i posted on a wrong section(Am I in the right section?) By the way,Here is my problem. My graphic card is Intel 82852/82855.And it passes the Ubuntu Desktop Effects requirement. I am aware of enabling the graphic card in Ubuntu 10.10, Since enabling the drivers was successful. I enabled the desktop effects.After i switched to Normal(Graphic Mode)the screen went blank. Then after i clicked ALT+TAB. there is an option to keep this option or not.I clicked Keep this settings. Then i proceeded in Web browsing(because i'm a web addict). Then i click CTRL+ALT+LEFT/RIGHT For the workspaces to switch. Then i found this 4 square transparent with black margin boxes.Which has a weird distorting effect.That effect is going crazy. Then i rebooted(Hoping to fix the problem).Then it is still there.