I have mounted a samba share on my desktop from a remote server (with smb4k). There I created a symlink to "/". When I open the symlink with konqueror it opens the right one (the root directory of the server), but when i open this link with the shell (cd rootfs/), then it opens my local root directory (of my host)... Is it possible to open the right link with the shell?
View 1 RepliesStart>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....
I have a server with my music on it. There is a network share where all my machines can access that music. In the past I have created a link inside the Music folder of each user/machine which links to the Samba share. I have been doing this by linking to /home/[username]/.gvfs/share on server.
In 8.10 I am able to drag and drop to create the necessary link from Music to share on server. With maybe 9.10 I lost the ability to drag and drop the link and had to resort to the command line ( ln -s "/home/[username]/.gvfs/share on server" /home/[username]/Music ). With 10.10 I don't seem to be able to create this link using any method. (Any link which is created is linked to / .) (After 8.10 admin rights are required to create the link from ~/.gvfs/whatever.) This method is very handy as all of the machines and users point to the exact same location for their music (~/Music/share) and if I can't create that link this system of organization fails.
I have been using pidgin on windows XP with .purple on another networked computer [also win XP]. in windows you can set the environmental variable to change the location of purplehome to the //windows_share/.purple and it 'just works' I am now trying to replicate this using ubuntu 10.04 LTS I need some answers: should a symlink be used? should it be added to fstab? should properties, command be changed in pidgin? I have tried all of these but I must not be doing it right cos it is not working! Trust you can help me out on this. I am a relative newbie but have been using ubuntu for a year or so, just never sorted this one out.
View 1 Replies View RelatedI have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I have karmic on my laptop, and I can't access my windows network. I have had previous versions of ubuntu and managed to configure samba. However, since my last reinstall, I can't get it to work.
View 7 Replies View RelatedI am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
View 8 Replies View RelatedWhen I create a new folder on my ubuntu machine and share it with my windows 7 machine using 'net usershare add <dir> <path>', I can't get write perms in Win 7. It keeps giving me a "You need permission to perform this action'. I've chmod the folder to 777 but still no luck.
The funny thing is, it was all working fine until I tried to add a new usershare yesterday (Can't think what I've changed). I use this sharing method to share all of my development /var/www/ folders so I can work on them from my win machine.
I have had a few problems with my samba smb.conf, and it nuked and rebuilt yesterday. I'm fairly new to the Linux game, and this permissions problem has me baffled.
Ubuntu 10.04 with Windows OS as Virtualbox, using Samba I connected to another computer which shows up mounted as:
Code:
smb://scott/premier9/
Now in Virtualbox Shared folders it doesn't show up so I can't share it?
Screen shots below...
How can I See it in Virtualbox?
My desktop is now dual boot, Xubuntu 10.10 has been added to WinXP. The attached parallel printer works fine with either OS. When running XP I can share the printer with my two XP laptops without problem. I cannot share it when the desktop is running Xubuntu. Neither laptop can see the printer. However, if I open the desktop Samba config application, change any parameter, retype in the original parameter, both laptops can see and connect to the shared printer - until I reboot the desktop
View 9 Replies View RelatedI've installed ubuntu 10.10 and shared with samba a folder of the disk with no problem I tryed to share 2 different usb disk and I got problems!
With windows I can see the shares, but not browse and all the setting in smb.conf are the same for the folder in the hard drive and the USB disk
I have a samba-share that mounts on my desktop. But how do I find it from applications?
When I browse from application is not visible in the desktop folder.
PS. I find it with smb://pathway, but I don't know how I can do it from some gui-applications.
I have two Ubuntu 10.10 computers and two Windows XP computers connected to my network. I cannot share files between the Ubuntu computers using samba. I keep getting the "Unable to Mount Location Failed to mount Windows share" error. I've tried the solutions posted by dmizer here and nothing works.Random true facts:I can successfully connect to folders shared on my Windows XP computers from either windows computer.I can successfully connect to folders shared on my Windows XP computers from either ubuntu computers.Neither of my windows computers cannot connect to folders shared on either ubuntu computer.Neither ubuntu computer can connect to folders shared by the other ubuntu computer.I REALLY need to get samba to work since I have other Windows computers on my network.
View 8 Replies View RelatedCan I share an NFS mount with samba?
Scenario:
ServerA has an NFS Mount to ServerB at mount point /home/qlogger/logs
I can cd to /home/qlogger/logs on ServerA and see the contents as they would be on ServerB (NFS Working with proper permissions rw).
I have a samba share setup on ServerA to share the NFS Mounted Directory (/home/qlogger/logs)
I connect with my windows host and am able to view the files and folders. I can create folders just fine however; when I go to copy a file from the windows machine to the samba share I receive a message saying the file is locked.
I have disabled oplocks in samba and the problem still persists.
so i found an older computer i want to play with as a file server. ubuntu server edition, installed gnome GUI (to make things easier for now, i plan on removing it later) and used [URL].. to configure my 1.5tb harddrive so my windows machines can access it. i had everything working but than a fatal crash made me start from scratch (os and all) now i am unable to access the samba share from a machine running windows 7, but i can access it from a machine running windows XP using the same login and password i set up for windows 7.this makes me believe it's a problem with windows 7 and not samba.
View 8 Replies View RelatedI'm able to connect to a networked Windows machine and its shares using the Places -> Network -> Windows network interface, but unable to do so using smbclient at terminal command line. I can see the shares using:
smbclient -L //server -U username
But when issuing the command:
smbclient //server/service -U username
I get:
domain=[server] OS=[Windows Server 2003 R2 3790 Service Pack 2] Server=[Windows Server 2003 R2 5.2]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME
The share name has spaces, like
lab raid root share
I use 40 to fill in the spaces. This problem must be something fairly simple if I can connect via the Places GUI but not through the command line.
I have this samba share for ghosting images to (backing up computers at work) and I can read the ghost images just fine from the share, but I am unable to write to the share. From any windows environment I have tried, I get a disk is full error. I have 200GB+ free space, so this is not the actual issue. I believe there is a write permission somewhere that I am overlooking. My setup basically lets me log in under the username samba from a client machine.
Here is my smb.conf file:
Code:
#======================= Global Settings =======================
[global]
workgroup = discount.local
server string = %h server (Samba, Ubuntu)
[code]....
I've tried chown on /media/Images to make it owned by samba, but it just reverts once I remount the partition. Either that or my eyes are playing tricks on me.
what I am trying achieve is read/write access for my MS domain account and read-only access for everyone else. In smb.conf I have this:
Code:
map to guest = bad user
usershare allow guests = yes
username map = /etc/samba/smbusers
[code].....
I can access this fine with my MS domain account, what I can't work out is how to give others read-only access to the same share. I guess I could create a second share for the same folder with a different name and permissions, but that seems a bit clunky and I'd have to remember to pass on a different name to the one I am using. I also tried using the Nautilus right-click "Sharing options" and then setting the folder permissions. This works fine for giving others read-only access, but loses capitalisation of the share name and doesn't seem to recognise my MS domain account as being valid.
I managed to install samba and it's GUI. I tried to share a directory within the pictures folder (at home/mark/pictures/share) just as a test. I had everything set up right, but it was inaccessible from a windows XP machine on my network. After some digging I found the problem lay with the permissions of it's parent folder. I right clicked on the parent folder then clicked properties, then clicked on the permissions tab. I changed the permissions for others and it's working fine.
I'm having the same problem now but with a share on a NTFS drive called storage. I cannot change the permissions for the shared folder or any of it's parents by right clicking. Any changes I make revert immediately back to their previous setting. Is there any way to change the permissions to allow read access to everyone?
I need to access a windows share at my university's server. When I am at the university, I can access the share by nautilus (or dolphin) in a similar way to ftp:
smb://domain%5Cusername@server/share
The thing is that when I try the above anywhere else except the university, it does not connect. I guess it has something to do with the domain, but I am not sure.
I have 2 Ubuntu machines: a desktop in my bedroom, and a laptop.
I have my music shared on my desktop machine, and can access it through the network menu item in the nautilus manager, but I want the files from the share to be mounted on the disk so I can access it through the commandline.
If I right-click the shared folder in Nautilus, it says its location is smb://rob/music
If I do:
mount -t smbfs //rob/music /mnt/music, it tells me that it cant locate rob.
So I try "ping rob" and that doesn't work.
I can't make a hosts entry for rob which happens at this moment to be 192.168.0.8, because my router assigns different IP addresses to various machines at different times, and I cant seem to find a way to make static maps from MAC address to ip address.
So, how come nautilus can see my samba share on the machine "rob", but the mount commands cannot?
I have sent the last 5 hours (it is now 6am) and I am in no mood for lazy know-it-all'sI have returned begging and crawling back to Ubuntu (I waited a day for 10.10 to be released) and I have again stumbled across why I go back to Micro$oft's Windows.All I want to do it have a permanent share to my nas, which is on my Netgear DGND3300.I can reach it by Place -> Network -> Windows Network -> NAKALEEN -> NAS -> USB_Storagebut for the life of me I can't make it permanent. I need it as all my Movies/TV/eBooks are on this.I have followed every and I mean EVERY option I have found on Google with no luck. From the fstab/mount option to the gvfs option (as you can guess both failed)The reason it is *$&^%$^&%$ me off it that Windows can do it with a couple of mouse presses (Map Network drive). Making Ubuntu a joke in this area.
View 9 Replies View RelatedMy work uses an internal software suite where the data is hosted with a linux server. It uses mysql and samba shares. We are currently opening a new location and need to be able to access the samba shares. We are able to access the mysql databases. The samba shares are used to store various files for the software such as updates, invoices (as pdf files), etc. I've setup vpn connections using windows servers in the past but I can't, for the life of me, get a VPN server setup on our linux server that windows will connect to. I've tried openvpn and pptp. I'd prefer to use the built in windows client to connect.
View 8 Replies View RelatedI am getting this error when I try to share a folder through samba.
Error 255 cannot convert name "Everyone" to a SID
I do not have a file /etc/init.d/samba Has this been replaced by /etc/init.d/smbd ?
Also, I have a /var/lib/samba/usershares folder but it is empty. Is there supposed to be something inside?
I have been looking in the forums but I found no solution for my problem.I already configured Samba and I am sharing folders, printers, etc. (Samba, authentification mode = user, guest account = nobody, share the folder give access to them, enable the permission to access, write, etc.) and seems to be working well.I am trying to connect a Windows to my shared folder in Ubuntu. The only problem is that Samba rejects it and doesn't ask for the password. It just drop the users (from Windows and Ubuntu systems) that try to access to my folders.So when it do in a Terminal sudo smbpasswd -a USERNAMEand I type no password, then it works they everybody can access to those shared but when I type any password then it comes back to the same problem that Samba never asks for passwords and rejects the users.
So the solution would be just give no password to share the files, but the other problem is that every time I restart the user session (restarting the computer, logging out, etc.) it just comes back to the same problem that Samba drops the users and doesn't ask for the password. Seems that every time I restart the system just forgets that I set no password.Another thing is that when I set authentication mode = shareThen nothing works. No password, no access just is possible to see it.
I am trying to share a USB external Hdrive from my ubuntu install to my windows systems (win 7 and 1 win xp) Everything seams to be working.. as in I can see the computer in "network" from windows explorer.... The problem is no matter what I do I can not seam to browse onto it or even type in direct share locations....
EG: //Zbox/HDMedia
or just browse through the Zbox computer icon that appears in my "Network" window in explorer. I have "sudo chmod 0777 /media/HDMovies"I can see it in the win7 Network window.. I assume it is some setting for security...I am on a home network and not very security conscious. I just want it to work.
I'm running 10.10 on a pretty fresh install with a brand new system I built especially for Ubuntu.For some reason, I'm beginning to have trouble with accessing my Samba shares from this computer. I have a Windows Home Server also running on my network and I have to be able to access the files on it.At first Nautilus showed "SERVER" in the folder tree when I clicked on "Network" and everything was working great. A couple of days ago my WHS "SERVER" suddenly no longer showed up in Nautilus and I had to mount the WHS server manually (via "Connect to Server...").
Now, today, even that doesn't work. When I try to mount manually I get the error "Failed to Retrieve Share List from Server". I can now no longer access the WHS from Ubuntu at all.Why has my ability to access the Samba shares on my WHS deteriorated over time to the point where I can't access them at all?? Any ideas?I have other systems on this network (Mac and Windows) and none of the others have any problems at all with the WHS. Re-booting WHS and router has no effect. I've changed nothing in my set-up. Is this update related?
I'm running Mac OS on a home network that includes a Win 7 machine and a Ubuntu box (Ubuntu 11.04 (GNU/Linux 2.6.38-8-generic i686)). Connecting to, and browsing the shared drives I have on the Ubuntu box (which acts as my server) is extremely slow from the Mac, it seems that the icons especially take ages to load. I've found a few suggestions on the net that I've implemented to no avail i.e.
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=65536 SO_SNDBUF=65536
Are there any other settings I should play with, or is there an alternative to samba that will work faster on a mixed network and be compatible with everything?
I have been searching around but could not find an answer that suits my problem.Here is the line I have in my /etc/fstab//192.168.1.188/openshare /mnt/lacie_nas/openshare cifs errors=remount-ro,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0The remote directory is a LACIE NAS.At boot the directory is not mounted but if I execute the command "mount -a" it works perfectly.
View 4 Replies View RelatedWhat I am tring to do is give all users of group users rwe any files/directories of a samba share execpt for the top level.Top Level cotains a number of folders and a readme file and should be r-eSublevel should be rwe including files/dir they did not create.I'm am familure with chmod/chgrp but not sure how to do this.
View 1 Replies View Related