Ubuntu Networking :: Remote Access A PC (running Winxp) From Laptop (running Ubuntu 10.10) Over Internet

Jan 12, 2011

I need to remote access a PC(running winxp) from my laptop(running ubuntu 10.10) over internet.

View 1 Replies


ADVERTISEMENT

Networking :: Allow Remote Access To Server Running On User Account?

Jul 11, 2010

In the past, I've installed Internet services as daemons and as xinetd.d with no problems. Those approaches do not meet my needs. And, perhaps, nothing will.

- the service was converted from VB-6 to wxPython. It has a GUI which is accessed with either "remote desktop" or VNC.
- the wxPython service works on Windows and can be accessed from other hosts on my LAN
- the wxPython service works on CentOS and Fedora, but can only be accessed from within the server host. Even from other user-ids. But, I cannot get to it from other hosts.
- ipchains AKA firewall ports are marked for INPUT.
- The server host uses autologin to fire up a useid in group "user". I do not want it running as "root". the .bash_profile fires the service up.
- the service is heavily mult-threaded, and supports devices connected to serial ports asynchronously with the ephemeral port threads (all this works).

There are some programming solutions that I would rather not develop.
- a proxy service that runs under xinetd.d.
- separate the GUI code from the Internet and serial port code. Allocate a "control" port for remote GUI control. a'la SAMBA & SWAT

Is there any hope, that I can run it as is, by doing some network configuration stuff.

View 8 Replies View Related

Ubuntu Networking :: Laptop Running Vista Can Connect To The Internet But Its Not Visible On The Network?

Feb 21, 2011

i have 3 comps(running ubuntu 10.04) and a laptop(running vista sp2). i have installed samba on all ubuntu comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.

I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet.the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.all the systems have a static ip.

View 9 Replies View Related

Ubuntu Networking :: Can't Access Work Remote Desktop Via The Terminal Server Client On Wired Box Running 10.10?

Dec 3, 2010

I am at a loss. I can not access my work remote desktop via the terminal server client on my wired box running Ubuntu 10.10. My wireless laptop is able to connect right away once I established the VPN connection. The VPN connection is established on both boxes with no problems.

When I tried the Terminal Server Client on my wired boxed, it says it can not establish a connection. Yet my wireless box gets connected immediately!

I check the /etc/dhcp3/dhclient.conf and the /etc/resolv.conf to see if there were any differences, but they are essentially the same. When I have the vpnc connection, they both recognize it and I am able to ping the IP address shown when I do a "ifconfig" on the terminal.

What can be the problem? Anything I need to configure on a wired computer versus a wireless one? What else can I check?

View 7 Replies View Related

Ubuntu Networking :: Connect To Internet Through WinXP Laptop

Aug 8, 2010

I just installed Ubuntu 10.04 on my mac G4 (PPC) and it does not connect to wireless with my wireless card (drivers maybe) I am a complete newbie with any linux operating system (I've tried SLAX but never kept with it) So is there anyway i can use my laptop with Windows XP to cennect to the wireless on my G4 using an Ethernet cord?

View 2 Replies View Related

Networking :: Want To Access RHEL5 Bu Remote Desktop From Winxp?

Jun 17, 2009

I want to access RHEL5 by remote desktop from windows XP.

View 1 Replies View Related

Networking :: Running Foxpro On Centos ( Server ) Via Winxp Client?

Jul 30, 2010

My office is on migrating to UNIX system. I am configuring Centos as our server including some program will be running on it. But one of the problem is we use foxpro for operating some program on server directly. I can run that program on Centos using DOSBox. My question is how can i run that program on winxp client that connected to network through samba to that program on server? so my plan is just give the shortcut and link it to server. I have tried to open it but not work.

View 1 Replies View Related

Ubuntu Servers :: Access Virtual Instances Running On The Cloud From Remote Desktop?

Aug 8, 2010

I am a novice in the world of cloud and recently managed to configure Ubuntu 9.04 Cloud (using kvm, eucalyptus and other packages) successfully at my college for my project work. The problem is that i can only manage to view the running instance using rdesktop from any remote machine. Is there any way to do this other than rdesktop/logs? Secondly, I want to develop a application on the lines of google docs as a part of my project. Is it possible to install apache server on this virtual instance, and host a website? How will the client access this website? Which frameworks would be required or do I have to develop one?

View 3 Replies View Related

Ubuntu Networking :: Running Remote X Application?

Jan 14, 2010

I have two computers running Ubuntu. I want to run the copy of Firefox that is on the remote machine. i connect to the remote in the usual way, "ssh -X fermi", which brings up a console on the remote machine, fermi. When I type "firefox", however, it starts the copy of firefox that is on the local machine. On the remote machine, "ps aux|grep firefox" confirms that firefox is not running there. Is there a way to force execution of the remote copy?Or, can I start a local copy of firefox using the remote bookmarks, preferences, etc?

View 3 Replies View Related

Ubuntu :: Running WinXP Programs In VirtualBox?

Jun 5, 2010

Everything works fine; No problems running WinXP from an ISO, etc. I have several Windows only applications which I want to run on the WinXP VM. I cannot see the programs I have downloaded when using Explorer for Windows.Ordinarily, in a WinXP only system, I just find the program to be installed and double click on it to start the automatic installation routine.In this case, I cannot see any of the .exe files used for the install.I have placed those downloaded Windows application in the same directory on my Ubuntu Box as where VirtualBox, the Sun Guest Editions and the CD Image of the Garmin Trip and Map system.I installed the Garmin system directly from and ISO of the CD I made using Brasero. It works without a hitch.Should I take the Windows e.e programs and burn them to a CD and then transfer them as ISO tback to the VM drive?

View 3 Replies View Related

General :: Disable Internet Access For Programs Running In Wine?

Feb 24, 2011

How can I disable Internet access for programs running in Wine?

View 3 Replies View Related

Ubuntu Networking :: Running Remote Programs For A Long Time?

Mar 14, 2010

I suspect this has been posted before, but I'm new enough to the OS to lack the proper vocab for a proper search.

In any case, I'm basically trying to run programs remotely at work (from home) that will run for a long time. I first ssh into the appropriate network, then ssh into the individual machine. This works great and I can run programs no problem. The issue is that these programs can run for days or weeks, and the network kicks me out after some period of time due to inactivity.

Is there a way to start a program on a remote machine then terminate the connection but have it keep running?

View 6 Replies View Related

Ubuntu Networking :: Get A Dhcp Server Running On Laptop

Jan 19, 2010

I'm trying to get a dhcp server running on my laptop. I want devices to be able to connect to a wireless AP I've set up (using hostapd) to then connect to the rest of the internet via my ethernet connection from the laptop.

However, I can't get dhcp to work properly. It always fails, leaving this message in the syslog

Code:
Jan 19 15:49:15 lucid-laptop dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.
Jan 19 15:49:15 lucid-laptop dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.

[Code].....

View 2 Replies View Related

Networking :: Setup Laptop Running Ubuntu 10.04 Into Router?

Jun 18, 2010

\How can i setup my computer (currently running Ubuntu 10.04 lts) into a router so that other laptop can have a wireless connection to it and be able to access the Internet?

View 4 Replies View Related

Ubuntu Networking :: Bluetooth HSP Not Working On Laptop Running 10.10?

Oct 30, 2010

I bought a DELL Bluetooth Headset and paired with my laptop running Ubuntu 10.10. I can connect to Audio Sink service on my bluetooth headset and it works but I couldn't connect to Headset service on my bluetooth headset. Bluez daemon quits when I try to connect to Headset service. The same bluetooth headset works fine with my XP. I can connect to Audio Sink and HSP service in my XP.

View 2 Replies View Related

Ubuntu :: Running Dual Boot 10.10 And Winxp On A MSI P4M900 Motherboard

Dec 6, 2010

Was running dual boot 10.10 and winxp on a MSI P4M900 motherboard. Have two HDs - one with OSs and some storage and the other purely backup for storage and Ubuntu home. Motherboard died and going to be replaced by Gigabyte G31 board. I will be using the same video, audio PCI cards and memory from old board. Should I look to a clean install of 10.10 and then bring back to life from my backup files (bookmarks, email etc) or could I plug in hard drives and boot normally? There is conflicting advice when I google - some say its OK just to boot, the kernel will sort out the new mboard drivers, others say you need a clean install.

View 2 Replies View Related

Networking :: Connecting Mybook 2 (external HDD) With Laptop Running Ubuntu 10.04?

Jun 3, 2010

im having problems connecting mybook 2 with my laptop. Everything was ok and running perfectly and there was no changes in my laptop or upgrades and it stop working. I was not able to see the computers in my network then I fixed it I can see them but when I try to browse the files the OS tells me that is unable to mount location and failed to retrieve share list from server. The funny part is that if I go to Places>Connect to server and type my mybook ip address, my laptop can connect and I can browse the files. I really dont know what is the problem. My firewall is down so I dont think that is the problem. If anyone can help me with these because I know im able to connect to my mybook but i am unable to connect to any other laptop or my WD-Tv live.

View 1 Replies View Related

Networking :: Use SOCKS Proxy Running On A Remote Machine?

Jun 21, 2010

How can I use socks proxy which is on a remote machine?

Machine A: Running a socks5 proxy on port 1080..

Machine B: Wants to use socks proxy of Machine A..

How can I do that? I have access to both the machines..

View 2 Replies View Related

OpenSUSE Install :: 11.4 As VM Running On VMWare Server 1.0.10 Under WinXP

Aug 15, 2011

I am trying to install openSUSE 11.4 as a virtual machine running on VMWare Server V1.0. VMWare Server is running under WinXP 32bit.

I configured the VM with the following settings:

10GB disk
512 MB Ram

The installation starts from the DVD after inserting the disk. OpenSUSE setup appears, i do not touch the default resolution 800x600. Every thing is looking good. After setting the language, the installation process continues. Then a problem with the screen/resolution/graphical adapter appears. After a while I cannot read anything from the setup screen, everything is unreadable. I remember I had those problems already with 11.3 but I did not follow this issue an took openSUSE 11.1 instead. With 11.1 I could follow the installation instruction till the end and I got a running system.

View 7 Replies View Related

Ubuntu Networking :: Cannot See Network Icon - Nm-applet Running - Notification Area Running

Dec 25, 2010

Hi. I have Ubuntu 10.04, nm-applet is running in the background, my battery icon and sound icon are showing but my network icon has been missing for the past 2 days. It was working fine before but now it's not. How can I fix this issue if I don't have an ethernet cord? Is there a way to roll back the recent updates or do I need to reinstall my network manager?

I've tried restarting the system and I've tried killing nm-applet and reloading it using Alt F2. I get some Debug error.

When I try to run nm-applet --sm-disable

It says an instance is already running and then gives me a warning.

I tried removing "iface eth0 inet dhcp" from /etc/network/interfaces and then tried restarting by "sudo /etc/initi.d/networking restart"

It says:

What can I do to connect to the internet? I have a flash stick if its possible to download a .deb package on this mac and transfer it over to my other laptop to fix the problem. If its possible.

View 7 Replies View Related

Ubuntu Networking :: Internet Running Very Slow

Jun 16, 2010

my computer ran on windows now is duel boot runs fine with vista internet wise (wireless) but ubuntu is very slow just like a lo of people are saying but just now i thought i will hook it up wired to modem and it is not any faster at all very confused and dont know where to go or what to do

View 9 Replies View Related

Ubuntu Networking :: Slow File Sharing \ Copy Some Files From Laptop(also Running 10.04) And Getting Around 300-500 Kb/s?

Aug 9, 2010

I recently got my D-Link DWA-556 pci card working with my new desktop with Ubuntu 10.04 64-bit. Connection speed is good, but local network file transfer speeds are pitiful. I'm trying to copy some files from my laptop(also running 10.04) and I'm getting around 300-500 kb/s, which is actually lower than my typical download speeds. Anyone know what the problem might be? output of iwconfig is this:

Code:
wlan0 IEEE 802.11bgn ESSID:"linksys"
Mode:Managed Frequency:2.412 GHz Access Point: 00:1D:7E:59:04:0E

[code]....

View 3 Replies View Related

Fedora :: Root User And Got Magicjack Working Under A Winxp Running On A Vbox

May 22, 2011

I finally got magicjack working under a winxp running on a vbox. But somehow I have to login as root and run the vbox as root. otherwise if I run the vbox as a normal user, I cannot mount the magicjack usb device, it appears as a grey disabled box. I am sure this is some kind of permission issue, but not sure how to grant the permission.

View 3 Replies View Related

Networking :: Internet Connected But Not Running?

May 2, 2011

i have tata docomo 3g device i have connected my device using sakis3g in my fedora 14
i have recently change my 32-bit fedora to 64 bit...internet was working in 32 bit
but when i connect me device to my 64 bit fedora 14 ....it shows your device isconnected.but when i used to ping google.comit shows unknown host google.comno web page is running in firefox too.i dont think it is 32 or 64 bit problem

View 5 Replies View Related

Ubuntu Networking :: Can't Access Https Pages - Running Firefox In 10.10

Nov 19, 2010

HTTPS doesn't work. Im running firefox in ubuntu 10.10.

View 1 Replies View Related

Networking :: Allow Access To The Internet Through Laptop?

Apr 23, 2010

I have my desktop and laptop connected using an "Cross Over Cable" to transfer files. Each PC also has a wireless card which is used to connect to the internet. Today, the card in the desktop went bad, so I want to access the internet from my desktop through my laptop. Here is the specs running Ubuntu 9.10

****DESKTOP****
eth0 (Wired NIC)
IP 10.1.1.10
Bcast 10.1.1.255
Subnet 255.255.255.0
Route 10.1.1.0

[Code].....

View 15 Replies View Related

Networking :: Internet In Virtual Machine Not Running

Oct 22, 2010

I have removed Network Manager Gnome from my Ubuntu which is a virtual machine(Guest OS),I see the internet is no more running inside this Virtual Machine.While in other Virtual Machines (Other Linux) I had not removed Network Manager Gnomeand I see internet is running fine in them.

View 3 Replies View Related

Fedora Networking :: Setup A LAN With An FC14 Laptop - FC15 PC And A Windows Machine Running XP?

Jun 27, 2011

Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.

When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.

Firewalls and SELinux on both machines are disabled. Here are some configuration details:

rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64

[Code]...

View 3 Replies View Related

Networking :: Cannot Access The Web Server From The Computer Running Apache?

Aug 3, 2010

I set up my first web server and it works flawlessly -when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.

I have two network interfaces on my server, eth0 (public static IP connected to internet directly) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1. It is connected directly to the internet and serves as a SNAT for other comps on the lan.I added "192.168.1.1 www_server_com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.HOwever, the server itself only opens website if the address islhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www_server_com ( I cant use dots as I do not have more than 15 posts on the forum )Here is the firewall script I am using.

#!/bin/sh
#
# Example Firewall Script

[code]...

View 2 Replies View Related

Networking :: Running Tools After Changing The Internet Service Provider?

Dec 5, 2009

I am facing some problem while running my tools (electronics tools).Actually my company has changed the internet connection (internet provider). Everything is working fine but it changed my IP address (which is ok) but it also changed my HOSTNAME (which is really starnge for me).And the problem with my tools is that with old connection it's working fine but with new connection GUI mode is not working, only batch mode is working.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved