Mount a Windows share where my user account has admin privileges. All permissions granted to the share on the windows pc side.Mount statement is as follows:sudo mount -t smbfs -o username=johndoe //winname/directoryname /mnt/tmp/Share mounts ok but does not let me create or write to an existing file. When I select Properties on the directory it says that permissions are unknown on the share looking at it from Ubuntu.
I just set up a storage server with NFS sharing. Everything work fine but, when trying to mount the remote partition on my ws, this is the issue: /usr/sbin/start-statd: line 8: /sbin/rpc.statd: Permission denied /usr/sbin/start-statd: line 8: /sbin/rpc.statd: Success mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
I tried so to mount it locally : mount.nfs: access denied by server while mounting localhost:/var/ftp/pub /mnt I don't think it depends because of the permiss of the directory, and anyway it's 1777.
I cant install Ubuntu 11.04 , on my Emachines laptop. On my Windows 7, When I boot up my USB/CD/card, it says: Ubuntu failed to mount dev/loop0 , something like that everytime, no matter what I do. And when I try wubi it says permission denied, .log filed saved. I've also mounted it using clonedrive, nothing works.
When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".
PDC is ClearOS 5.2 named "dc0" Samba file server is CentOS 5.5 x86_64 named "sysimage" dc0 Samba version is samba - 3.5.5-1.1.v5.i386 sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64
dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.
i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
I have my ubuntu comp setup as a media server and works fine with mythtv etc but I also want to access the files from my computers in the other rooms (most have windows 7). I was able to share the file containing the videos easy enough by right clicking the file and checking all of the sharing options the first time. I have been able to access all the files that i originally put in the folder and stream video to my other computers without issue.
However any new files I add to the folders I am now unable to access. The files show up but when I click on them it says I don't have permission. I have tried unsharing the folder and redoing it but I come to the same issue. I am sure I am just forgetting an easy step but I can't think of what that is. Also want to make sure that any new files I add to this folder will work instantly across the network.
I have a written a java code to ftp a file from the windows box to unix box. It keeps giving me the following error : "java.io.FileNotFoundException: PORT 204,63,56,5,16,78: 550 Permission denied." I am able to ftp manually from windows to unix.
I'm trying to install Ubuntu on Windows XP as a dual boot using Wubi, but whenever I try to install it I get an error message that says: An error occurred: Permission denied For more information, please see the log file: c:docume-1lanzarolocals-1 empwubi-10.04.1-rev190.log Does anyone know what this means and if I can fix it?
Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
I'm sure there is a very trivial solution to my problem but I just can't figure it out due to my lack of knowledge.I want to mount an nfs share share on client1. The share is on server1.The server1 /etc/exportfs has entry: /backup client1 rw,all_squash,no_subtree_ check) The client1 sudo mount works just fine: sudo mount server1:/backup /backup..Can anyone let me know how to mount the nfs whare with options to read/write permissions for a regular user. And then put that mount into /etc/fstab? Should I mount first and then change the ownership of that folder?
I wanted to use NFS4 with id mapping. I followed the write up at [URL] and basically have everything working.
The problem is that I cannot write a file unless I have group write permissions. On the server the user has uid = 1000, gid = 1000. On the client the user has uid =1699, gid = 1000. Both have the same user name.
On the client the directory listing properly shows the user name and the group name. If the file on the server is 644, the client cannot write to the file. If it is 664 on the server, then the client can write to the file.
/etc/export on server contains:
Code: /export 172.24.84.0/24(rw,fsid=0,insecure,no_subtree_check,async) /export/myuser 172.24.84.0/24(rw,nohide,insecure,no_subtree_check,async) /etc/fstab on client contains:
I want to access my desktop from my laptop over the internet, after a while I found this [URL] so I followed the instructions "Access your PC over the internet" and "Logging in from another Ubuntu PC". Everything goes well until I try to run the shell script and get this: firstname.lastname@example.org's password:
I tried my luck with the passphrase associated with the rsa key, with the password of the laptopuser@laptop and with the password of the desktopuser@desktop but I keep getting Permission Denied (publickey, password).
I have a shared directory on another machine but I can't get it to mount as a samba share. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too. The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ****** mount error(13): Permission denied Refer to the mount.cifs( manual page (e.g. man mount.cifs)
I run a small home network with a wireless network using Apple airport wireless router. I have two macs and one Linux box (Fedora 13). Everything worked until about a week ago. Now the two macs can communicate with each other, and one of the macs can communicate with the Linux box, but the other can't, which is a bummer because it is a print server.
Pinging from the mac to the linux box gives the error message:
I'm implementing static IPv6 address on two Fedora 13 installed hosts. These two computers are connected using a switch between them and I use D-ITG to generate traffic in the network.I need to send packet from host1 to host2 using this command and I got permission denied
Code: #./ITGSend -a 2001:db8:c003:111e::3 -T UDP -x recv_log_file -t 30000 -c 32 Connect error in createTransportChan(): Permission denied
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
I'm trying to install Ubuntu 9.10 on my Windows Vista Home Premium machine. My specs far exceed the requirements to install, so I know there's no problem there.On installation I receive an error somewhat through that says something like:Quote:An error occured:Permission deniedFor more information, please see the log file:C:UsersUsernameAppDataLocalTempwubi-9.10ubuntu1-rev160.logSo.... I go to that file, and the last line in it is:Quote:OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-9.10-desktop-amd64.iso'I did run Wubi Installer as an Administrator, and unblocked it giving it full privileges.It's really annoying because my download speed is 80kb/s so it takes about 3 hours to download. During that 3 hours I can't use my internet so I have to wait, and wait, and wait, and then boom.error. And wubi can't pick up where it left off, you have to uninstall to reinstall, which sucks tremendously.