I am trying to install VSFTPD on my Fedora instance of Linux. I have a Wordpress blog that I want to access through FTP. I did an install on VSFTPD and am kind of stuck. I try to FTP into my IP through [URL]
My apologies if this is the wrong board for this thread, but seeing how the issue appears to be related to where I'm connecting from, I thought this would be the place to look.To start off, I've been running VSFTPD on the box for a good year or so now. Until recently, everything seemed to be working fine, but during the past few days I've run into issues with it and have been having trouble pin-pointing the problem. I've gone as far as reinstalling VSFTPD and rechecking every line in the conf file to no avail.The issue presents itself when I try to login to the FTP server remotely. The moment I put my user name in, I get disconnected without any error message, simply connection closed. That isn't the case when I'm connecting locally from the server.If I try to connect remotely using eth0 (internal network), it works fine again... but if I try eth1 (external network)... it fails. I'm thinking it might be related to PAM, but so far have been unable to figure out what I need to change in the configuration there. Additionally, the PAM log file doesn't show any activity if I'm connecting through eth1, but displays it if connecting through eth0.
Ive managed to install samba, I've shared a folder. I can access from a Windows 7 machine via \ubuntupublic. I can put files in the folder form the ubuntu machine and edit them on the windows box. I can put files in the folder/share from the Windows box but then I cannot edit them on the Ubuntu machine (they are read only and have a "Lock" over them). I can fix this by going to the properties of the file/folder in Windows and manually assigning "Everybody" full control (then the lock disappears and all is well.) I want read/write access to all the folders contents from both machines all the time (security is NOT a concern I WANT the permissions wide open) what am I doing wrong?
obviously it's at least difficult but I'm interested in knowing if it's theoretically possible to allow anonymous users of vsftpd to upload to the same directory that anon_root is set to. If it's not then it's no big deal, I'm just trying to get a sense of the range of possibilities.
I just want to configure Vsftpd to allow users to have total access to the FTP server. The server and users are all on a private LAN behind a router with no access from the Net, so I don't need any security. The following basic configuration doesn't allow uploading files after I log on as anonymous/whatever:
Here's what happens when I log on as anonymous/whatever and try to upload a file: > ftp server Connected to server. 220 (vsFTPd 2.0.5) Name (server:root): anonymous 331 Please specify the password. Password:<whatever> 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files.
ftp> ls -al 200 PORT command successful. Consider using PASV. 150 Here comes the directory listing. drwxr-xr-x 3 0 0 4096 Mar 13 11:19 . drwxr-xr-x 3 0 0 4096 Mar 13 11:19 .. drwxr-xr-x 2 0 0 4096 May 25 2010 pub 226 Directory send OK.
ftp> put /var/tmp/ftp local: /var/tmp/ftp remote: /var/tmp/ftp 200 PORT command successful. Consider using PASV. 553 Could not create file.
I have been having problems with Samba sharing from my Ubuntu-Server to all of my Windows 7 machines. All of the machines are able to access the samba shares however when i try to write to these shares i get a "Access Denied" error. This only happens under windows 7, my Ubuntu laptop easily writes to these shares. PS My permissions are read/write to all
I'm setting up Ubuntu Karmic on my sister's old computer for my nephew, he's quite young so my sister asked to install some content filtering. I'll first setup an OpenDNS account and I've installed and managed to get dansguardian and squid working on a virtual machine to try it out. so far it's working pretty well, but I need to secure it form the inside out.
I was thinking of blocking specific outbound ports so he could not bypass the proxy. because by default the firefox configuration can be easily changed. so I have a couple of questions.
1. is it possible to block outgoing ports on Ubuntu? 2. is that the best method? 3. is there anything else I should be aware of to prevent subversion?
lastly, this question is probably unrelated to this board but I've set up a cron job to update a dynamic ip with OpenDNS, the problem is that the password is in clear text in the user's crontab, can I play with permissions? is it possible to run the job under a root account and deny read/write access to a normal user?
I'm running ubuntu 9.10, and created a softraid5 with no problems. Now i need it to automount with user read/write access, and i need to make some network share folders. My fstab has the following line for the raid:
Code: /dev/md0 /media/raid auto rw,user,auto,exec 0 0 After i mounted it, i changed the permission with:
Code: sudo chmod 777 /media/raid/ So now i can create folders and files on it. Then i created some shares, one with guest access and other with no guest access.
Now the questions:
1) If i access the guest shared folder via WinXP, i create files and folders, but they appear locked on ubuntu, so i cant access them until i change the permissions. If i go to proprieties/Permissions, the owner is "nobody".
2) What password do i need to use on WinXP, and i try to access the non-guest shared folded? Do i need to create a user just for that?
1- I've set up 3 virtual users,one of them is a system one (with a different password) and writes on his own home folder. With this one I haven't found any problems yet, but with the other 2 users I can't access files/folders created by them. It's a permissions problem for sure, but I'm not sure how to correct it.With these users I can upload files, create files and create folders. The problem is I can't access what I create (I can't enter a folder I created but it is there and I can upload files into it).
2- Whenever I turn on ssl_enable=YES I can't access the server (even from the server itself when I connect to localhost, It's a regular Ubuntu installation).Here's the config file for the users:
vsftpd is working fine in my network with anonymous user but i need to access that from out-side all the setting is done on the router. I am getting page to access ftp form out-side but only for ftp users not anonymous user how i will give permeation to access ftp to anonymous user ?
I've only recently encountered this problem with vsftpd when I was creating new ftp accounts. I keep on getting:
550 Access Denied.
on every action I try to do on ftp, no matter what. I've been trying to solve this myself however my attempts have been futile.
The permissions, and ownership have been checked and rechecked tens of times now, so thats not the issue. I've reinstalled the OS of my server twice now, and the problem is still persisting. Heres my config file, this isnt for anon by the way.
Code: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. #
Trying to set up VSFTPD on the CentOS 5 box at work, which is an internal web development server. I'm leaving soon, and all knowledge of or desire to learn SSH is going with me so the other employees will need to be able to access the web root using FTP clients.
Essentially there is no need for special user accounts or privileges, it's an internal server in a tiny company. I've got the LocalRoot set to /var/www/ which I can log in to and read all files via FTP, however despite setting everything to 777 in /var/www/ and below, I still can't get any write privileges on the FTP server.
I am dual booting OpenSuse 11.2 and Windows 7 both 64bit on my PC. I've got VMware workstation installed on both. I've got few virtual machines which were all created in Windows VMware and they're all stored on a separate partition. I can access this partition and all other NTFS partition from Suse but with read-only permissions. That means I can't run any of these virtual machines from Suse VMware. Is there any possible way to make all these drives writeable from Suse? I'm really hoping someone would be able to help me. I've got a lot of googling and have even searched this forum but without any luck.
I have CentOS 5.5 distribution with Dom0 and DomU installed. I try to access Dom0 files during vsftpd server from DomU during ftp client. I successfully login with root and simple user, but when I try to list (or cd to some directory) in user home the SELinux prevent it from me. I get this in audit.log:
Seismicmike here. My first post. I'll try to be as clear and concise as possible. For the sake of this post, I'm going to use 184.108.40.206 as a place holder for my public IP. On my web server, I would like to be able to access the /var/ftp directory through a web browser. I have successfully done so with Google Chrome, but I cannot access the directory in Firefox or IE. Both FF and IE ask me for authentication but then time out attempting to load the directory.
I suspect that there may be something up with switching to passive mode and/or that this issue may be more with my configuration of Firefox and not with the server (seeing as how Chrome works). Another possibility may be related to SSL. When I connect with FileZilla, I have to use the FTP over Explicit SSL/TLS option in order to connect. In any case I still would like to fix it. I would also like to avoid having to install FireFTP if at all possible.
Steps to reproduce (not that you can without my actual IP =J):
* Open Chrome * Go to ftp://220.127.116.11 * Enter username * Enter password
I receive the message "SELinux is preventing /usr/sbin/vsftpd "net_raw" access" many times. Found this bug at redhat but really do not understand what i should do about it ((( Kindly let me know how to change this to normal. Shut down Selinux is not the way out.
I recently installed Ubuntu 10.04 using Wubi on an ACER Aspire 5000 XP laptop. Everything runs ok and I can access my Windows folders from Ubuntu through the host directory but only as Read Only. I have checked to make sure that the Windows folder I want to access (My Documents) is not designated as Read Only in Windows.
kernal 2.6.38-8 After updating Kubuntu-the log in screen will not progess to the desktop. It freezes and then shows the message "no write access to the home directory.." Goggling the problem - references to an .ICEauthority in my home directory are mentioned as linked to this problem. However "ls -la /home/charles" reveals that there is no .ICEauthority file present.
On opening nautilus,it shows the XP ad Fedora partitions.Clicking on them mounts the partition.However,XP partitions are mounted in Read/write mode,whereas Fedora partition is mounted only in Read mode.What changes should i need to make in /etc/fstab to enable Read/Write access to Fedora partition as well?
I have installed vsftpd by "yum -y install vsftpd",disabled anonymous login and set .When I use a linux client's file browser to login using a user account "ftpacc" by ftp://ip_address, its location is "/" instead of /home/ftpacc".When I use a window client to login, its location is "/home/ftpacc"