Ubuntu Networking :: Installing The Ipw2200 And Ieee80211?

Feb 17, 2010

I recently switched to Linux ubuntu 9.10 the olny problem i have now is my wireless. i have IBM THINKPAD t43 looked online, the best thing is to install ipw2200. Which needs ieee80211 I downloaded ieee80211-1.2.18 but when i run "make" it gives me this:

Code:

Checking in /lib/modules/2.6.31-19-generic for ieee80211 components...
make -C /lib/modules/2.6.31-19-generic/build M=/home/mohammad/Desktop/ieee80211-1.2.18 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-19-generic'
CC [M] /home/mohammad/Desktop/ieee80211-1.2.18/ieee80211_module.o

[code]....

I'm a root when i run the command from my understanding the problem is that there is a compiling error in ieee80211_module.c but i might be wrong!

View 9 Replies


ADVERTISEMENT

Ubuntu Networking :: Wireless Does Not Work - Ipw2200

Mar 3, 2010

I have been trying for months to get my wireless working on my acer laptop and I am now beyond despair. I using an Acer Extensa 67000 and here is what is at issue:

ubuntu@ubuntu:~$ lspci -nn | grep 'Wireless'
06:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
ubuntu@ubuntu:~$ lspci -vn On this one I posted just what I thought would be relevant:

[Code].....

View 3 Replies View Related

Ubuntu Networking :: IPW2200 Un-associated / Cannot Make A Connection

Nov 13, 2010

I just removed Windows XP from my Dell Latitude D510 and installed Kubuntu 10.04 LTS lucid lynx. Obviously upgraded with apt.It seems to try to connect to the local AP (no encryption), but the connection fails.

View 8 Replies View Related

Ubuntu Networking :: Patch Ipw2200 For Aircrack Injection?

Apr 29, 2011

how to patch it. but the problem is, I can't find a working download link.

View 1 Replies View Related

Ubuntu Networking :: Ipw2200: Failed To Send CARD_DISABLE: Command Timed Out

Jan 23, 2010

I cannot connect my Sony Viao laptop to wireless. It just will not seem to connect. I am a bit of a n00b i am afraid so go easy on me
I have been through /sys/bus/pci/drivers/ipw2200 does exist. The Wireless has connected before but it has just seemed to have stopped. I have tried a few suggestions made in the forums and edited my interfaces config.

[code]...

View 9 Replies View Related

Ubuntu Networking :: Ipw2200 Driver Disconnects Frequently On 9.10 Karmic Koala

Jan 24, 2010

my ipw2200 w-lan driver's been disconnecting frequently and I've done some research on it, while seeing that it's been a frequent problem, in the past.

View 9 Replies View Related

Fedora Networking :: IPW2200 - Failed To Send System Config

Jun 8, 2009

I'm using Fedora 9 and I recently transferred my hard drive to a new laptop. Everything went smoothly except the wireless, which promptly broke. I played around with the network service and the NetworkManager service and chkconfig stuff and system-config-network, until I finally got it to work. Now I have wireless, but every time I shut down, I get some error-like messages:

"ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command." repeating every second for about 3 or 4 seconds before it finally does shut down.

These also appear in dmesg, usually about 20 in a row, thus my concern. My wireless device's interface is eth3. How to get rid of this message while still keeping wireless connectivity.

View 1 Replies View Related

Ubuntu Networking :: Ubuntu 10.04 Ipw2200 1.2.2 And Jamx Patch?

Jun 21, 2010

So I've been looking around and some people say that the IPW2200 driver doesn't need Ieee80211 to work properly. What I'm trying to do is compile my own driver with the Jamx patch for version 1.2.2 but then it says that I do in fact need Ieee80211 to be installed. Even though I don't have it installed, my wireless works great. I just need the patch to work with the driver. I've also tried configuring some of the files in the Ieee80211 folder but it doesn't seem to help at all. When I try to use the make command for Ieee80211 I get this:

Quote:

gooch@gooch-laptop:~/Downloads/ieee80211-1.2.18$ make
Makefile:17:
Makefile:18: WARNING: $SHELL not set to bash.[code]..

As you can see, It looks like it got rid of the proc_net errors but I still can't get it to install properly. Also, if I try to do the make SHELL=/bin/bash, it ends up being the exact same thing. This is really starting to get frustrating. Is there any way I can bypass this or do I need to install Ieee80211? If so, how can I do it without all these errors in Ubuntu 10.04.

View 1 Replies View Related

OpenSUSE Network :: IPW2200 Interrupted - NM Fails To Reconnect

Jan 6, 2009

Just having updated from SuSE 10.3 to 11.1 I'm struggling with some network issues. WLAN connection setup with Network manager worked, the connection comes up on login to KDE 3 and works for some time. All of a sudden, the wlan connection fails and reconnection via NM is not possible. The normal wired ethernet stays fully operational and connection is established at plug in of the cable. I tried to track the issue down by browsing through /var/log/NetworkManager but I did not find the answer. A rcnetwork restart brings back a fully operational network including wlan connectionvia NM.

Working connection fails, NM fails to reconnect:
Code:
Jan 6 13:04:30 mars NetworkManager: <info> (eth1): supplicant connection state: scanning -> associating
Jan 6 13:04:30 mars NetworkManager: <info> (eth1): supplicant connection state: associating -> associated
Jan 6 13:04:31 mars NetworkManager: <info> (eth1): supplicant connection state: associated -> 4-way handshake
Jan 6 13:04:31 mars NetworkManager: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake .....

View 3 Replies View Related

Ubuntu Networking :: Installing On A Windows Networking Environment

Feb 8, 2010

What I did to configure the network:

1) remove network manager

2) make ip address entries in /etc/network/interfaces and /etc/resolve.conf files.

when I do networking restart it is showing

"reconfiguring network" [OK].

However Google.com is an unknown host. I am getting the feeling I am missing something. The network adapter is showing green led . Does it have something to do with the microsoft networking that's running in my office?

View 2 Replies View Related

Ubuntu Networking :: No Internet After Installing RAM?

Apr 24, 2010

Today I put in two brand new RAM sticks, same brand as the two I already have in there only difference is the new ones don't have the giant heatsinks that cover the stick. I have 4 slots for RAM, and I had 2 gigs in there, 1 gig in the first, and 1 in the 3rd. I put the two new ones in the empty slots. Everything worked fine, so it seemed. I was able to boot up, log into Ubuntu. It looked like everything worked, said I had internet access by the icon up on the top panel. The only thing that was curious was my weather app wasn't updating. So I went into a web browser, and the home page showed up fine. Which was the default, the ubuntu google search engine. I tried to go to another site though, and it kept looking for the site, for a while but never found it. I tried multiple sites, same thing. I tried to ping www.ubuntu.com, and www.yahoo.com and it just hung for a while, after a while it couldn't find it. I tried ifconfig eth0, and even just ifconfig. It showed that eth0 was connected, it had the ip address, the DNS address, the MAC, everythting. Only problem I could see was at the end it said something like Interupts: 18, I don't know if that's normal or not.

So I tried then to reset the router, no difference. I tried resetting the hub (at least I think it's a hub, could be a switch or something), which is connected to the router, and the hub connects to my computer. Now that, made it worse. Now the icon for my internet has disappeared, well it tried to reconnect but can't. ifconfig eth0 brings up no ip address anymore, no DNS, no nothing. I tried rebooting, didn't help.

So here I am, and I'm definatly in need of some help. I find it very hard to believe that adding new RAM would kill my ability to get online, that doesn't make any sense to me. I am using Ubuntu 9.10 64 bit, had 2 gigs in there, and now have 4. Edit: I tried rebooting once again, and this time when logging on Ubuntu it for some reason checked my filesystem for errors, found none as far as I can tell, then logged on. Once I logged in, it connected again to the internet, but it's doing the same thing it was before I restarted the hub. Says I'm connected, but can't visit any webpage, weather isn't updating, but homepage is showing up, etc.[URL].. Which is the same RAM I had in there, minus the one in there had a giant grey incasing/heatsink on them.

View 6 Replies View Related

Ubuntu Networking :: Installing USB Wireless On 10.04?

May 23, 2010

Just installed 10.04 but can't seem to get wireless working. Fry's brand USB device (FR-54USB). Device works when booted to Windows but light never comes on in Ubuntu so I'm guessing it's a driver issue.

It looks like this is a D-Link chipset but I can't tell which one. lsusb shows the following:

Bus 001 Device 005: ID 07d1:3305 D-Link System
Device Descriptor:
bLength 18
bDescriptorType 1

[Code].....

View 9 Replies View Related

Ubuntu Networking :: Disabled After Using / Installing VPN?

Aug 7, 2011

Everything was working fine today and for many days before today. (this is a pretty fresh install of 10.10 Maverick).

I installed a VPN connection (PPTP) to connect to work.

That worked fine. i connected, remoted into the machine I wanted and did what I had to do.

I was ABOUT to disconnect from the VPN and when I clicked on the network manager icon BAM it said DISCONNECTED. saved me another click or 2. But now I have no networking at all.

The network manager icon says "Networking disabled"

I tried: warm booting a couple times cold booting a couple times

I also tried:

Code:
service restart networking
and
Code:
sudo /etc/init.d/networking restart

[Code].....

I would really just like to delete/uninstall anything that has to do with VPN's and see if that works. Or maybe reinstall network manager. Are those reasonable places to start?

View 3 Replies View Related

Ubuntu Networking :: Installing 3G USB Key With The Console?

Aug 10, 2011

I wanted to replace Gnome by KDE, I made a fatal fault: I deleted Gnome without installing KDE previously, thus i'm in console mode. Some friends proposed me this apt-get install kde command but that does not work because I have no internet connection, how to install my key 3G Orange by using the console?

View 9 Replies View Related

Ubuntu Networking :: Installing The Server On Qnap?

Feb 10, 2010

Qnaps run on Atom: is it possible to install Ubuntu server at all? I like them being small and easy on the power drain, but I'd rather have my OS of choice.

View 3 Replies View Related

Ubuntu Networking :: Verifying (and Installing) Mac80211 In 8.04?

Mar 1, 2010

I am reasonably technical but new to Linux. I almost guarantee there will be simple things that I don't understand. I am trying to get a USB wireless adaptor working with aircrack-ng and have managed to find that I should have the mac80211 drivers installed and active to support the rtl8187L and B chips. (I also need to patch them apparently, but first things first).

I am working with Ubuntu 8.04LT (I am fairly sure) and do not seem at the moment to be able to update to a more recent version on the target machine. The kernel is 2.6.24-27. I followed instructions to blacklist the r8187 and ieee80211 modules, which seemed to go quite smoothly.

I now need to get the mac80211 module loaded, but can't find out how. The information at Aircrack-ng and related sites seems to indicate that I expect the drivers to be already in my build of Ubuntu but they do not seem to be loading. The suggestion seems to be that they will load automatically. I have found some stuff in /lib/modules/2.6.22-14 and /lib/modules/2.6.22-27, and also in /usr/src/linux-headers-2.6.24-27 which is probably relevant but I don't know what if anything to do with it. If anyone needs more detailed information, just tell me what you need to know, and how to get it.

View 1 Replies View Related

Ubuntu Networking :: Installing EVDO Card In 9.10?

Apr 5, 2010

i have loaded ubuntu 9.10 few days back. I am having problem in configuring my BSNL EVDO CDMA2000 modem(Micromax MMX 300c). Guided by some of the threads, i have followed the below mentioned steps..

xxxxxxx@xxxxxxx:~$ sudo modprobe usbserial vendor=0x05c6 product=0x2001
[sudo] password for xxxxxxx:

Then connected the modem and gave the comment

xxxxxxx@xxxxxxx:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 05c6:2001 Qualcomm, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

then i edited the wvdial.conf(i dont understand the details provided in the threads in configuring .conf file)

xxxxxxx@xxxxxxx:~$ sudo gedit /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

[code]....

View 9 Replies View Related

Ubuntu Networking :: Installing And Activating B43 Driver

Apr 18, 2010

Need to install b43 driver to use monitor mode on my card - versions are compatible, I ran
Code:
sudo apt-get install b43-fwcutter
As told, but instructions end there. Pressed yes to download and extract firmware. Do I need to activate this driver somehow?

Info on wireless card:
Code:
tnt@Artemis:~$ lspci -vnn | grep 14e4
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Broadcom STA driver is activated in the hardware drivers manager.

View 2 Replies View Related

Ubuntu Networking :: Installing Wicd Without Internet

Jul 5, 2010

I have a Dell Mini with Unbuntu Hardy 8.04 with a Broadcom STA wireless card BCM4312 802.11b/g. In April the Network Manager stopped working.After trying various fixes, based on advice and instructions posted for others who had the same issue, today I decided to completely uninstall the Network Manager and install wicd- which seems like a working alternative. I uninstalled the Network Manager and used the installation instructions for wicd (URL...). While connected to the internet with a wired connection, in my Synaptic Package Manager I entered the new address deb URL... hardy extras. Then I opened a terminal and entered.It looks like an argument is needed, but I have no idea how to add that to the command. I've found the key file (I think) here URL...but I don't know what to do next.

View 7 Replies View Related

Ubuntu Networking :: Installing Lucent Modem On 10.04?

Jan 14, 2011

I have a lucent modem! I instal this modem with this help:[URL]..but my modem is not detect!

Code:
ali@ali-desktop:~$ sudo agrsm-test
Found drivers for boot kernel 2.6.32-21-generic at:
/lib/modules/2.6.32-21-generic/updates/dkms/agrmodem.ko
/lib/modules/2.6.32-21-generic/updates/dkms/agrserial.ko
Loading drivers:
FATAL: Error inserting agrmodem (/lib/modules/2.6.32-21-generic/updates/dkms/agrmodem.ko): Unknown symbol in module, or unknown parameter (see dmesg)

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Installing DWA-130 USB Wireless Adapter?

Feb 13, 2011

I'm trying to use a D-Link DWA-130 wireless adapter with my desktop running Ubuntu 10.10. I've been scouring the forums (and google of course) and really can't understand why it's not working.The output from "iwconfig wlan0 is:Code:wlan0 no such deviceSo here is where I ask the stupid question: must you have a wireless card in the computer to use a wireless usb adapter? I built the computer myself you see and was looking to save some money.

View 9 Replies View Related

Ubuntu Networking :: Compat-wireless Not Installing?

Feb 23, 2011

i cant seem to install compat-wireless on my netbook i have done it previously but it is not working this timeQuote:

make: gcc: Command not found
make: Entering directory `/usr/src/linux-headers-2.6.35-22-generic'
./scripts/gen-compat-autoconf.sh config.mk > include/linux/compat_autoconf.h

[code]....

View 1 Replies View Related

Ubuntu Networking :: Installing Wireless Card TI ACX 111?

Mar 17, 2011

I recently installed the latest version of Ubuntu because I want to switch to Linux. The installation went well and now I want to connect to the Internet.However, it is necessary that I install the drivers for my wireless card, but I do not know how.I started reading the documentation, but I soon was dropped, I began.My wireless card: Texas Instruments - ACX 111.I said that I use a WEP key, I understood that was important in the documentation.I also want to say I have no wired network near my computer so I am forced to log into Wifi connection.

View 9 Replies View Related

Ubuntu Networking :: Installing The USB Wireless Antenna?

May 4, 2011

I installed Ubuntu alongside Windows 7 in a Dell Laptop. Installation went smoothly, everything works. I have to admit that its better than Mac. However, I later found out that my internal wireless card was not supported by wireless monitoring applications (aircrack, kismet, etc) that I wanted to learn to use. So I brought a compatible USB wireless card, Netgear WNDA3100 V.2, but then I run into some problems. First, how can I install new hardware in linux? Second, I know I have to install the madwifi driver but do I have install the original driver before I install madwifi? Can I have both antenna running at the same time?

View 2 Replies View Related

Ubuntu Networking :: Installing Cisco VPN Client On 11.04

May 7, 2011

I'm trying to install the Cisco VPN client on Ubuntu 11.04, kernel version 2.6.38-8 generic-pae. I need a step by step process since I am an absolute beginner with Ubuntu and this is my first install on the operating system. I have already tried the network manager but connection always fails. I have also tried the website [URL] but this always fails, seems this was made for earlier versions of Ubuntu and earlier kernel versions.

View 9 Replies View Related

Ubuntu Networking :: Lost Eth0 After Installing VPN

Jun 15, 2011

I wanted to try to install one of those public VPN services in order to try a software program. I setup a VPN for a service that is located in the UK. I successfully installed the VPN that just required me to use their gateway address and they also supplied the username/password. All I did was edit the connections from the Ubuntu Network Manager to add the VPN. After rebooting I no longer have my wired "eth0" connection listed and the Network Manager shows a red X.

I use a DSL service and my computer is directly connected to the router. I am using Ubuntu Natty 11.04. I read where you may have to edit the /etc/udev/rules.d/70-persistent-net.rules because it may cause an entry of eth1 instead of eth0. My file still shows eth0. I have also deleted the contents of that file and rebooted, as suggested in other posts, and eth0 is in the file, but still does not show in my Network Manager.

If I type in terminal: sudo ifconfig | grep eth, I get an output of:
eth0 Link encap:Ethernet HWaddr [my mac address]
Going to Whois shows my IP address as that from my local ISP. Clicking on Network Manager > Connection Information, I receive a window that states : "No valid active connections found". Obviously, I am connected to the Internet. Is there a way to restore my eth0 connection?

View 1 Replies View Related

Ubuntu Networking :: Installing RT2860 Driver?

Jul 2, 2011

I've been snooping around on the forums for a couple of hours now looking for a straightforward guide to installing custom wireless drivers. I have a new Airlink101 AWLH6075 wireless card (and no ethernet connectivity.) The Linux drivers are the RT2860 Ralink drivers in a .tar, which I have on a different computer.

So -- I'm on Server (command-line only), 64-bit, no working internet. Btw, the wifi card works fine on my alternate boot of Windows. wlan0 (wlan1?) is not detected during installation.

So, I know I need to:
1. mount the usb drive I'm storing the file(s) on
2. put those files in my local Linux directory
3. somehow install them
4. (disable my old ethernet connection?)
5. enable my new wlan0 and set up dhcp and the WEP login.

[Code]...

I would greatly appreciate any help I can get with any of these things. I don't even know how to mount a USB stick in command-line... but obviously the internet connectivity (and thus driver installation) is the major issue here and I can find out most of the other stuff on my own.

View 9 Replies View Related

Ubuntu Networking :: Absolutely No Internet Capabilities After Installing 9.1

Mar 27, 2010

I recently installed Ubuntu 9.10 onto an older laptop for my boss. However, after installation I lost all internet capabilities... both through wireless and ethernet connections. There is zero indication that Ubuntu is picking up any wireless connections at all and when I plugged into an ethernet connection Ubuntu acts as if it is trying to connect, however unsuccessfully. I have eliminated the internet connection as my problem because I was able to connect with my laptop running 9.10 with no problem. I have searched and searched everywhere for fixes to this problem however 99% of them need an internet connection to install the required firmware and drivers... is there any OFFLINE solution out there?The computer is a Compaq Presario 2200 with a Boradcom Corp BCM4306 802.11b/g Wireless LAN Controller

View 4 Replies View Related

Ubuntu Networking :: Installing SMC USB Ez Connect G Wireless Adapter?

Apr 19, 2010

I have Ubuntu 9.10, which I just now installed on my Dell Dimension 3000. The computer has all of its USB ports working perfectly; tested in Windows. I plugged in my SMC USB Ez Connect g wireless adapter, and it isn't even recognized by the system. I used lsusb, and nothing except the USB keyboard and mouse shows up. Every time I boot or shut down, I get tons of errors saying that it's "unable to enumerate USB device on Port...," then the port number of whichever port I plug the wireless adapter into. I've tried using ndiswrapper, and have completely installed the Windows drivers using that (which were the same ones that worked perfectly in Windows XP Pro). I've tried looking into compat-wireless and Linux Wireless, and have successfully installed the zd1211rw drivers and everything. The drivers install completely and work, there is just no hardware present, or so it says. This is what the terminal says when I type dmesg, and also part of what shows up on booting and shutdown:

[code]....

I hope I've given enough information. Oh, and I downloaded Ubuntu a few days ago from their website, burned to a CD-R, installed, and downloaded all updates that it asked me to. Other than that and the ndiswrapper and driver installation, I've done nothing on the system.

View 1 Replies View Related

Ubuntu Networking :: Installing PPTP VPN Server Via Webmin

May 9, 2010

Tried to install pptp vpn server via webmin, and I tried connecting remotely from my laptop, but it keeps failing on the verify username and password - I get a error 778 it was not possible to verify the identity of the server. Not sure what could be wrong with the config..

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved