Ubuntu Networking :: Connecting To Wifi With 192.168.0.x Addresses
Mar 29, 2010
I've happened across a wireless router that has a gateway address of 192.168.0.1 and allots IPs from 192.168.0.64-255. My laptop wouldn't connect to it automatically, so I was playing around and found that it needed 0.x instead of 1.x. I thought the network manager on ubuntu would have figured that out?! Now its a separate story that the router happens to have no admin password
I just installed ubuntu 9.10 in my freinds laptop and it has a realtek 81878 wireless card...it detects the wireless networks but when i connect it just keeps on asking for the authentication key again and again.
I updated successfully to 10.04 via wireless, then I downloadsynthesizer via wireless. The next day, today that is, can't get wireless to work. It keeps prompting mor the passphrase, I enter everything correctly, all the other computers in the house have no problem.
I am working with ubuntu (gnome) 10.10 maverick 64 bit on a HP pavilion 2713ca. I have installed the Broadcom sta driver for a BCM4328 wifi driver. After setting wpa security with my password, the wifi network worked for many weeks. However, in the last few days it does not connect no more. I have tried to reinstall SSID. And I have checked to see if eth1 was still there:
root@max-HP-Pavilion-dv2700-Notebook-PC:/home/max# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11abgn ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Bit Rate:14 Mb/s Tx-Powerff Retry min limit:7 RTS thrff Fragment thrff Encryption keyff Power Managementff Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I'm using a HP mini netbook, and I recently installed Ubuntu on it. I updated and did the whole proprietary drivers activation and it now scans and sees networks but I am having trouble actually using them now. It says that it is connected to a wireless network but it never loads any pages.
im using minimal ubuntu 10.04 and im having trouble connecting to wifi using the terminal. the wifi worked perfectly on the desktop version. i followed this guide [URL] and looks like then i used '/etc/init.d/networking restart' and get this now it seems ive disabled wlan0 as $ sudo lshw -C shows
i tried to enable it again by using 'sudo ifup wlan0' but i get a few errors i think the 2nd errors may be because i tried to download another driver for the wireless using 'wget [URL] and then 'dpkg -i rt3090-dkms_22.214.171.124-0ubuntu0~ppa1_all.deb'
I am a newbie trying to setup wifi using 9.10 on a compaq nx9010 . The driver is activated for the broadcom 4320 rev 2 chipset. the wifi light is on.I can connect to my neighbors's unsecured network, but not mine which is using personal WPA2 security.
I am using a lynksys Wireless-N Broadband Router WRT160Nv2 I have installed WICD and removed the gnome network manager WICD tries to validate authentication which fails. then it tries to obtain an ip address which fails. finally it says: CONNECTION FAILED: UNABLE TO GET IP ADDRESS". meanwhile it is showing the wireless network at 100% signal.
last nite tried changing wifi channel, changing to WEP, installed and tried WPASUPPLICANT and WPA_GUI. Unfortunately , nothing worked. The wifi controller was able to assosciate with the network but could not authenticate. I'm wondering if the passphrase that I type in on the computer is somehow being turned into a hexidecimal or something so that it does not match what the router has as the pass phrase.
Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
I am connecting from my WinXP laptop to my Ubuntu Server desktop using PUTTY. The laptop is using Wifi and the desktop is on a wire. I have a D-Link DI-524 wireless router. My session works fine for a while, and then freezes, sometimes after only a few seconds, and sometimes after many minutes. The same thing happens when I use VMWare Server Console to connect from the laptop to the desktop's virtual machines. Other connections between these machines under this setup (RDP, samba, SVN) do not experience problems. I usually do not experience problems establishing the SSH and VMWare connections.I have ended up using Windows Remote Desktop to connect to a Windows XP virtual machine on the desktop, and opening a PUTTY session on that machine. That's a nice workaround, but it makes it so that I have to have that VM running in order to have a reliable SSH session to the box
I've noticed that switching to Ubuntu about 6 months ago has made it noticeably more difficult to use the free wifi at my school. When I had Windows 7 on the same laptop, it was much easier to establish and maintain a connection. I know it's not the hardware. My question is: is there some security setting that makes it difficult to use public wifi on Ubuntu? Also, I don't have this problem at home on my WPA2 home wifi network.
I'm a novice using Ubuntu 10.1 on an Asus EeePC. For several days, my computer has refused to connect to the office wifi, though it's had no trouble doing this in the past. It recognizes the signal, and the wifi icon keeps indicating that it's in the process of connecting, but the process never completes. Every few minutes I'll be asked to re-enter the password. Eventually it gives up.
I'm not sure if this problem extends to other wifi networks or just the one at my office.
I am using Ubuntu 11.04 desktop. I a, using my internet through wifi and it was working fine but suddenly it start strange activities... like when I restart ubuntu it work for few clicks but then suddenly stopp even wifi is showing connected but I cant use internet.
I often connects my laptop (Asus EEE) to my HTC desire hd with the wifi hotspot. But this doesn't work since yesterday when I upgraded to 11.04. When I connect the laptop to the phone the screen on the laptop goes black with a lot of scrolling text then it freezes.
This worked out of the box without any problems with 10.10.
moved to Fedora 11 but can't figure out how to get my wireless working. I have the broadcom driver installed and the Network Manager Applet shows the available wireless networks, but when I click on them they just don't connect.I get the following output on lspci regarding the wireless adapter:03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)
I was running 9.10 in LiveCD mode and was unable to get online. Went to System>Administration>Hardware Drives and found "Broadcom STA wireless driver". Cool. So I went ahead and installed 9.10 (dual boot with Vista), repeated above steps but found no "Broadcom STA wireless driver" option, in fact no proprietary drivers. So I still cannot connect to the Internet, and I don't know where to go from here. (Note: I installed 9.10 side by side with Vista: good? bad?)
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
Just upgraded to Natty on both my desktop and netbook. Desktop upgrade was a breeze, and I'm liking the changes.Netbook isn't having such a good time however.First login after upgrade (using default gnome settings) played the login sound and froze. No mouse movement/keyboard response. I tried again with Ubuntu Classic - nothing. Finally Ubuntu Classic No Effects did correctly boot/login. I allowed it to perform a proper shutdown (was doing a power flip beforehand), and it was able to boot into normal Ubuntu Unity.
I enabled the wifi module using the laptop's keyboard shortcut, and Ubuntu searched for nearby networks. After finding my prefered network, it started to connect and threw the system into a command console abyss and froze. Tried again on the Ubuntu Class no effects, and it freezes on connecting to a wifi network. If the laptop crashes and I have to perform a power cycle, I can't boot into normal Ubuntu mode. I have to go back into Classic no effects.
I have seen tons of threads on the internet about Ubuntu 10.04 having wireless issues but none of them have lead to me fixing the problem so I decided to come here. I have been able to connect to access points before but sometimes I have to reboot or reboot twice just to be able to see the wireless points and the enable wireless is always greyed out. And if I am connected to an AP or hardwire the connection drops frequently.
just installed Debian 8.2 on my ThinkPad X230 laptop using netinst. I installed only basic system and then install packages I need manually. Now I stuck with NetworkManager and Wi-Fi. NetworkManager and its applet (package network-manager-gnome) installed, I can connect to my Wi-Fi network, but after reboot a dialog asking for passphrase for keys appeared and even after entering correct passphrase NetworkManager does not connect to the Wi-Fi, so I need to connect it manually.
I have a Skytex SX-E700 netbook with a Linux system and I cannot connect to my Time Warner home wireless system. It will connect but the IP address is invalid. Time Warner has no idea how to fix it. Has anyone had this problem and figured out how to fix it? By the way -- I can't find any system info on this little netbook and can't seen to get into anything that tells me what it contains.
I've recently acquired an old HP Pavilion ZT3000 and have decided to install Slackware, but I'm having trouble with the whole rc.inet1 configuration stuff. I've been able to connect to the internet manually with the following command: Code: iwconfig eth0 essid [access-point-name] key restricted [my-wep-key] (...and then use "dhcpcd" to get an ip address.)
As you can see, eth0 is my wireless interface. Not exactly sure why (the comp has a IR port,wifi and Ethernet.) I'm using a shared WEP key (I know the security implications of WEP). The key being shared is the reason restricted is a parameter in the iwconfig command. I've been trying to get it working through /etc/rc.d/rc.inet1 but I can't seem to setup rc.inet1.config correctly I'm not sure where to set the key to "shared"
I've searched the forums and I could use the working iwconfig command with ./bash_profile as a startup script. This has the problem I need sudo (ie setup /etc/sudoer), which seems like a lot of work, when rc.inet should work. And it also has the problem of having to enter my password THREE times (login, sudo iwconfig and for sudo dhcpcd) which is horrible (and I don't even know how it would work when I set X to begin on startup again). I probably could also install "wicd" but having to ferry across files and trying to setup things without the internet is a pain.
I first booted into Fedora and it connected to the Interneting was working brilliantly. I then booted into windows for a session of TF2. After I booted back into Fedora, it wouldn't connect to my network.I did fix this by doing a hard reset on my router, BT homehub. It's just that I don't want to reset and apply custom settings all the time.
ive installed ubuntu for netbook on my laptop, everything went fine, it installed ok, and it was all good, until i tried clicking on the icon im supposed to click on to get conncected to wifi. where it's supposed to have various wireless networks it says "device not ready (firmware missing)" and ive tried everything i can think of to get it working, but it wont work. the same thing happens with my desktop computer, but with ubuntu desktop 10.10 and linux mint... but with the desktop, its probably just a case of finding drivers for my specific wireless adapter, in which case can anyone tell me where i can find the driver for a belkin F6D4050ea for linux?
i have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port