Ubuntu Networking :: Connecting Wirelessly With TP-Link TL-WN727N USB Adapter?

Dec 15, 2010

I'm having some issues getting connected with a TP-Link TL-Wn727N wireless USB adapter. I have no way to connect hard wired with the computer, but I have another working notebook to possibly download files. However, the second notebook is a Mac, so most of the posts I've found are not filling in all of the answers. Also forgot to note, I am using Ubuntu 10.10. I followed along with this and managed to get the card to find the wireless connection. However, the connection would never connect. After entering the security password the wireless icon would do it's thing and then pop up asking to ok the password again. I double, triple checked the password and it is correct. I found elsewhere that I should probably install wicd. This is where I've run into problems with finding the way to get files that I can download on the Mac and then installed on the Ubuntu computer. I managed to find this forum thread and downloaded this file I transferred the file from the Mac to the Ubuntu with a flash drive and tried to install. First the install said that Network Manager needed to be removed, so I removed it. Next it says "Dependency is not satisfiable: python-urwid." I'm not sure how to go about getting this dependency as it is not showing up in the package manager.

View 6 Replies


ADVERTISEMENT

Ubuntu Networking :: TP-Link Wireless Adapter (USB) On 11.04 - Not Connecting To Network?

May 19, 2011

i just installed Ubuntu 11.04 64bit on my desktop. i have a TP Link TL-WN321G (Ver 4.0) wireless usb adapter to connect to my wireless network (i used to use it with Windows XP).As expected (i'd read up a bit before installing Ubuntu), the adapter was autodetected - i could see my wireless network listed in the networks list dropdown, and lsusb showed it too.lsusb identifies "Bus 002 Device 002: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter"But i cannot connect to the network. When i select my network, it keeps trying to connect, but never succeeds in connecting.

i tried going through the forums for possible solutions, but most of them deal with how to get it working when the adapter is not detected, or when networks are not shown. Or they are for older Ubuntu versions.i use the same wireless network on my laptop (Ubuntu 9.04), and it has a WPA & WPA2 Personal security, with a password, which i've configured in the desktop as well.

View 1 Replies View Related

Fedora Hardware :: TP-Link TL-WN727N Not Detected?

Apr 30, 2011

I've installed F14 in dual boot with Windows XP. And while in XP my usb wi-fi adapter works in XP, i can't use it in linux, because it's not installed (i think). I need to install the adapter so i can have internet in F14. i've read some posts and threads in the forum but it's all very confusing and i've tried to download some rpm from the rpmfusion but i can't seem to install them, because it's always asking for some other version of the file.Heres some info, i've obtained based in what i've read:

Kernel Linux 2.6.35.6-45.fc14.i686
Gnome 2.32.0
[1.770483] usb 1-3: New USB device found, idVendor=148f, idProduct=3070

[code]....

View 3 Replies View Related

Ubuntu Networking :: Connecting Wirelessly Via Command Line?

May 11, 2010

For reasons that are not terribly interesting I decided it would be a great idea to remove and re-install the xserver-xorg package. Which proved to be a much larger mistake than I imagined it would be. I purged the package, and then restarted.Naturally I need to have an internet connection to use apt-get to reinstall xserver-xorg, which is where my idea falls apart.I followed the directions in the How To: Manual Network Configuration. However, after I enter the command "sudo dhclient wlan1" I get the line "wmaster0: unknown hardware address type 801" twice prior to the output that the above link shows. Then I just get DHCPDISCOVER messages until I get a "No DHCPOFFERS received. No working leases in persistent database - sleeping."

I'm connecting with WEP to a router that I know works (because I'm using it to type this on my laptop right now) and I know that the wireless adapter(RTL8187) is installed properly because it automatically connected to my network when I had xserver-xorg still installed.I'm running ubuntu 9.04.I've searched for a few hours and I'm no closer to resolving the issue.

View 9 Replies View Related

Ubuntu Networking :: 11.04 Not Connecting Wirelessly To Wpa Psk Aes Enabled Router?

May 3, 2011

I am using an HP dm3 1030us laptop. The wireless adapter is and Atheros 5009. I have a fresh and clean install of Ubuntu Natty in it. I am trying to connect to a Linksys WRT54G2 that is in G mode using WPA2 Personal with AES. Router info:

Router Information
Firmware Version: 1.0.01 build 003, Mar. 26, 2008
Current Time: Mon, May 02 2011 20:34:37
MAC Address: 00:22:6B:4A:44:DF
Router Name: WRT54G2
Host Name:

[Code]...

View 4 Replies View Related

OpenSUSE Wireless :: TP WN727N Not Connecting To Network

Feb 26, 2011

I just bought a new USB wireless adapter for my openSUSE 11.3 laptop, a TP-Link TP-WN727N. I can't get the new card to connect to my home wireless network, which is named WRT320N in the screenshot. KDE prompts for the key repeatedly but never connects successfully. Part of the problem might stem from the fact that this laptop now has 2 wireless cards: one build into chipset (PRO/Wireless 3945ABG) and the new USB card. Both show up in knetworkmanager but no clear distinction is made between them visually. Strangely my wireless network shows up twice in knetworkmanager as in the screenshot. Once per wireless card? As my wireless network is N-only I don't see why it would do this.

View 9 Replies View Related

Ubuntu Networking :: Connecting To WPA / WPA2 Network Wirelessly ( BCM 4315 )?

Nov 10, 2010

I've recently installed Lucid Lynx 10.04 on my Dell Studio which uses an internal BCM4315 wi-fi card to connect to the internet. I was hoping it would work upon the install, but deep down I knew I'd have to tweak it a little bit to get it up and running the way I wanted. The card was instantly recognized but, at first, wasn't detecting wireless networks. This was quickly and painlessly fixed using System > Administration > Hardware Drivers, which I used to install Broadcom B43 wireless driver (b43-fwcutter). I rebooted and could not detect the local wireless networks.

I entered my password to my home network (correctly, I quadruple checked) but, unfortunately, it continuously tries to connect to the network with no successful. Occasionally I'm prompted to re-entered the password and the process repeats. The network I'm trying to connect to is a WPA/WPA2 network which I've heard to be troublesome. I haven't yet tried connecting to a WEP network but I'm fairly certain it will work and I will get back to this post when I test it in a few hours.

I'm curious if this question has been answered or if the problem has been solved and I just simply don't have the google skills to find it.

[Code]...

View 3 Replies View Related

Networking :: Connecting Wirelessly With Newly Installed Fedora 14?

Jan 6, 2011

I finally got the driver to be installed and to be associated with the network adapter. Now the issue is the wireless network adapter won't connect to my wireless network. I am new to Linux, and am trying to get my Fedora 14 to work online, without needing to constantly be wired in (what's the point of having a laptop if you have to be stationary). Anyways my network has WPA2 personal security with a TKIP + AES encryption (I switched it from solely AES because I thought that might have been the issue).I've heard a lot of good things about Linux, but so far its been frustrating trying to get this wireless connection working. I am currently taking a course on Linux, and I am using the opportunity to learn about and maybe switch over to a Linux OS which I have heard so much good stuff about in my previous courses.

View 2 Replies View Related

Ubuntu Networking :: Wirelessly Connecting Desktop With A Linksys Wireless Range Expander?

Sep 30, 2010

After spending several months coming up with ideas (and ultimately failing), I have found the easiest and simplest way to connect your Ubuntu desktop (or laptop w/o a wireless adapter/card) to the Internet using only a Linksys Wireless Range Expander and an Ethernet cord.

YOU WILL NEED:
Linksys Wireless Range Expander (WRE54G)
Ethernet cable

Linksys wireless router (that is providing your home/office with wireless Internet) The WRE54G can be purchased online through various websites, including eBay. They run anywhere between $10 and $40, but it's going to be cheaper than a USB Wireless Adapter (and no software needs to be installed, making it universal for most Linux distros).

[Code]...

View 1 Replies View Related

Ubuntu Networking :: D-Link USB WLAN Adapter Not Working

Jan 12, 2010

I have just installed Ubuntu 9.10 on an Acer TravelMate 290E. I've got internet connection through the Ehternet Cable, but when I plug in the D-Link WLAN USB device, although the system recognises it, it is disconnected. How can I connect the WLAN USB device adn get it to work?

View 5 Replies View Related

Ubuntu Networking :: How To Install D-Link Wireless N 150 USB Adapter DWA-125

Oct 13, 2010

I want to install the DLink N150 (DWA-125) Wireless USB adapter in Ubuntu 9.04 if if go to

system-> administrator->log file viewer->dmesg
[ 8.840794] type=1505 audit(1286918554.305:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2041

[code].....

i don't know how to enable wireless.

View 2 Replies View Related

Ubuntu Networking :: D-Link DBT-122 Bluetooth Adapter Not Working In 11.04?

May 5, 2011

It worked with 10.10, but in 11.04 only partially. It would show up in Bluetooth Manager, and I was able to pair with my phone. But after that it always failed to connect. Tried lots of things before I spent $10 on another nameless Chinese one and that worked fine immediately.

View 1 Replies View Related

Fedora Networking :: D-Link DWA-125 Wireless 150 USB Adapter?

May 29, 2010

I have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,

i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.

View 14 Replies View Related

Ubuntu Networking :: TP-Link USB Wireless Adapter Freeze When Downloading?

Jun 8, 2010

I've a damn TP-LINK WG422G UBS Adapter that i love i installed latest compat-wireless driver package and used latest ar9271 firmware after that it was worked properly. There is no problem when surfing the net, the problem is occurring usually download something via torrent sometimes form websites. I'm starting to download and then usb adapter suddenly freeze. If i remove and plug in the usb adapter it is working again.

View 1 Replies View Related

Ubuntu Networking :: Install D-link Dwm-152 (3G/HSDPA) Usb Adapter On Lucid?

Jun 12, 2010

how to install D-link dwm-152 (3G/HSDPA) usb adapter on Lucid Lynx?

i've run lsusb and the result are:

Bus 005 Device 002: ID 0a5c:2162 Broadcom Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[Code]......

View 1 Replies View Related

Ubuntu Networking :: D-Link DWA-125 Wireless Adapter Doesn't Work W 10.04?

Sep 7, 2010

Have tried methods from every thread I could find for past 10 hrs. Have tried installing rt3070sta etc.Monitored message log; appears that the driver isn't recognized, though the USB port sees that something is plugged in (when I plug in the adapter, and unplug it).All of the threads miss something; I can't get a wireless port listed under ifconfig no matter what I try. Seems that every method leaves out something (I guess because everyone's box is different in some way). Network manager doesn't help much. Downloaded Wicd, which does even less.I guess I could try ndiswrapper, but I'm scared away by the hundreds of pages I see on going that route; I'm almost certain it wouldn't work (1000 possible points of failure).Does anyone have a strategy to recommend?AM64 box, newly installed Edubuntu 10.04, ran update manager.

View 3 Replies View Related

Ubuntu Networking :: WiFi Adapter TP LINK WN821N Is Not Working In 10.10

Apr 17, 2011

WiFi adapter TP LINK WN821N is not working in 10.10, WN821N is notworking.

[Code]....

View 3 Replies View Related

Ubuntu Networking :: D-Link WDA-2320 + 10.04 - Connecting

Feb 2, 2011

I am trying to get my wireless card to work in my desktop, which I recently upgraded from 8.04 to 10.04. It worked right out of the box in 8.04, but I'm finding it impossible to kick start in the newer LTS version. My wirless card is: D-link WDA2320 The Ubuntu wireless card Wiki sticky note at the top of this section supports my problems, stating: "Worked out of the box in 7.04, 7.10 and 8.04. WPA worked automatically in 7.10 and 8.04. In 9.04, works out of the box, but system hangs periodically with the ath5k driver; you must instead enable the madwifi driver in the Hardware Drivers dialog to get a stable system. In 9.10, does not work out of the box."

Obviously, it does not give me any information on 10.04, so I'm not sure it is even possible to get working. Assuming it would even work, I tried looking for madwifi in the Hardware drivers dialog (assuming they are referring to the option through System/Administration?), but cannot find it, or figure out how to search for it. Following the rules suggested for resolving wireless problems, here is my info:

2 ) Wireless Brand, Model and Wireless Chipset (via lspci):

[Code]...

View 3 Replies View Related

Ubuntu :: 10.04 On Laptop Not Finding Connecting Wirelessly?

May 5, 2010

just upgraded my laptop to 10.04, but I can't get the laptop's internal wireless to connect to my netgear router.the laptop doesn't even show all of the neighbor's routers.

View 2 Replies View Related

Ubuntu Networking :: Can't Load The Drivers For Tp-link Tf3200 Network Adapter

Feb 26, 2011

I have tried to install tp link tf3200 network adapter without success . the os is 8.04 hardy loading drivers is new to me. the driver is sundance (i think) and the output from the make command is shown below.

pag@paghomelinux:~$ cd /media/cdrom0/TF-3200/LinuxDriver
pag@paghomelinux:/media/cdrom0/TF-3200/LinuxDriver$ sudo make all
sudo: unable to resolve host paghomelinux

[code]....

View 9 Replies View Related

Ubuntu Networking :: Support Of TP-LINK 150Mbps Mini Wireless N USB Adapter

May 17, 2011

may i ask if TP-LINK 150Mbps Mini Wireless N USB Adapter support by Ubuntu? (TL-WN723N) I plan to replaced IBM x60s default wireless adapter, coz it's suffered overheat issued.

View 1 Replies View Related

Ubuntu Networking :: Ethernet Adapter - Connecting To The Internet

Dec 26, 2010

just recently I made the move back to Ubuntu from Windows. Upon re-installing I noticed a problem with me connecting to the internet. Previously on Windows I had updated my Ethernet Adapter driver, upon installing I would have to disable and re-enable the device to let my computer have access to the internet. My problem here is how would I go about fixing this on Ubuntu so I can have internet access on Ubuntu

View 1 Replies View Related

Ubuntu Networking :: HP Mini 210 Ethernet Adapter Not Connecting?

Jan 17, 2011

The Wired Internet adapter isn't working with Ubuntu 10.10, and without this working, I can't get my updates for the Broadcom WLAN adapter. I have a Realtek RTL8101E/8102E PCI-Expredd Fast Ethernet controller. I have looked for solutions, but haven't found any relating to my problem.

To be specific: Ubuntu 10.10 is recognizing the Ethernet adapter as eth0. When I try to manually connect after inserting an Ethernet cable connected to the Internet, it tries for a couple of minutes before telling me the adapter's been disconnected. The connector lights remain the same on the port as they always were.

View 1 Replies View Related

Ubuntu Networking :: TP-Link Wifi USB Adapter: Cannot Setup It In Master Mode To Use PC As A Router

Jun 10, 2010

I got two issues with my wifi usb adapter:

1) it cannot see any networks around
2) i cannot setup it in master mode to use my PC as a router

As far as i can see, the device is recognized and the correct driver (rt73usb) is loaded. I was able to connect to a laptop somehow (the laptop could see other networks and the adapter's PC-to-PC network). I'd like to make it work as a router, i.e. share my internet connection (eth0) via wlan0. Here is what i have:

Code:
Ubuntu 10.04
Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
TP-Link TL-WN321G wifi usb adapter as seen as
Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
$ iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:off/any
[Code]....

View 4 Replies View Related

Fedora Networking :: Wireless USB Adapter Not Connecting: F10

Nov 12, 2009

I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.

View 6 Replies View Related

Ubuntu Networking :: EDUP Wireless Adapter Not Connecting To Router?

Jan 3, 2010

For several months I was using EDUP adapter with both my laptop that operated on Ubuntu 9.04 exclusively and a desktop that could also boot with XP. Soon after 9.10 was released I updated my laptop and was able to use the adapter to connect to the Net.Recently, I also updated the desktop but also made it exclusively a Linux machine. Unfortunately, I have been unable to get the wireless adapter to work again on the desktop.The OS recognizes the device as wlan0, and lsusb shows:Bus 003 Device 005: 0cde:0008 Z-Com Sitecom Wireless Network Adapter 100G+ WL -125The network manager recognises the availability of the wireless network and attempts to connect. After trying for a while it comes up with a dialog box "Wireless Network Authentication Required" and in response I enter the WPA password but with no success.The behaviour would indicate that I am entering the wrong password but I am not.I have checked it several times and compared with the password that works with the laptop.

View 3 Replies View Related

Ubuntu Networking :: D-Link DWA-643 Xtreme N Express Card Adapter Not Working After Lucid Upgrade

Dec 3, 2010

1. D-Link DWA-643 Xtreme N Express Card Adapter The onboard wireless for my HP tx1000z stopped working a long time ago. This wireless adapter is in my express card slot.

2.

Code:
$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)

[Code]....

View 2 Replies View Related

General :: Connecting To The Internet Both Wirelessly And With An Ethernet Cord Into The Router

Oct 11, 2010

I just installed Fedora Core on my Dell Inpsiron B130 laptop and I am having trouble connecting to the internet both wirelessly and with an ethernet cord into the router. When trying to configure my network, I dont recognize any of the ethernet adapters in the drop down list. I have been told that my wireless card is Linux compatible (dell y8029 dell wireless 1370 802.11/a/b/g mini pci). My ethernet card is a B130 Broadcom Ethernet Driver which isnt in the drop down menu either.

I read that I need to download an ndiswrapper but I dont know where to find this download AND even if I could download it to a zipdribe, I have trouble opening a USB flash in Linux becuase its not a "valid block device". This is after the command "mount /dev/sda1 /mnt/usbflash"

View 4 Replies View Related

Fedora Networking :: Long Awaited WUA-1340 D-Link Wifi Adapter Has Arrived, And...unfortunately Won't Work?

Nov 2, 2009

my long awaited WUA-1340 D-Link wifi adapter has arrived, and...unfortunately won't work it didn't work "out of the box", so I tried the following (found on the aircrack website)Here's what I did....1. Edit /etc/modprobe.d/blacklist and add blacklist rt73usb as a new line.2. RebootThen,

Code:
wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt73-k2wrlz-3.0.3.tar.bz2
tar -xjf rt73-k2wrlz-3.0.3.tar.bz2

[code]....

View 3 Replies View Related

Ubuntu Networking :: TPLink TL-WN727N No Networks?

Feb 9, 2011

I just purchased this card, but when I run iwlist scan it shows 'No scan results'. I'm using the rt2800 drivers - I saw a couple of posts about using the rt2870sta driver but when I did this it didn't even show up under iwconfig. I'm sat next to my router and I've tried it with XP and it seems fine.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved