Ubuntu Networking :: Connect To The Internet Through Broadband Connection Dialer
Mar 9, 2010
I am using WINDOWS 7, in which i connect to the internet through broadband connection dialer wich requires username and password,aslo i have another connection wich is used to connect to LAN. I hav recently installed ubuntu 9.10.. Now my WIRED connection is showing established..with eth1 and following are the outputs of some coomands which might help u to identify the problem..
How to connect Ubuntu to the Internet through a broadband connection? I decided to give Linux a try, and I picked the Ubuntu variant. I have some problems with the Internet connection though. I have a broadband (modem-less) PPoE connection, and all the info needed in order for me to connect are the username and password (which I have).
I just installed Ubuntu in my PC and I tried to connect to internet using broadband connection. I use a ADSL router with WiFi access point to connect with network and dial my username and password using my computer to connect to internet.I could so it easily on windows 7 from Network and Sharing center and Setting up new connection or network and connect to internet using broadband internet.How can i do it with ubuntu 11.04 ?
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I have a multiboot system running several versions of linux which do not all use the same software for handling wifi connections or have the same kernel. They have all stopped being able to connect to the internet in the last few days. My Windows 7 set up still connects though it seems to be a slow to establish a connection.Could BT have changed something and if so what?
I'm using RedHat Linux. In my friend system have Winxp. I have 2 LAN Cards. I'm using wired Broadband internet. So i want to share my internet connection to my friend system through another one LAN card. How can i do this
I newly installed ubuntu 9, but I am not able to setup the internet dialer. I am not using cable modem. Lan cable from my isp's switch is directly connected to my Pc's ethernet card. In windows XP one dialer is created using Rasppoe. In ubuntu I tried it using pppoeconf command but itis notable to setup the connection.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
I'm using redhat linux 9 n unable to connect to the internet.my isp is log2space..they have given me a username n passwd which works in windows OS..have no clue how to setup a dialer or how to config in redhat 9
I've been using this network forever With windows and I can't figure out how to connect to it now with ubuntu...I have a build-in wireless card and I know the name/password of the connection, but my computer cannot seem to locate it. I've looked through guides and none of them work..
i just installed the 10.0.4 version. My problem is that I cant connect to the internet. When I add a new wireless connection, it says that its connected but i cant ping the router or connect to any websites. It keeps auto assigning me with a 10.42.43.1 ip which doesn't make any since because my router's is nowhere close to that.
I bought my new Dell inspiron N1401 64bit laptop. It has windows 7 installed in it, I am begineer to linux. I have installed Ubuntu 11.04 64 bit version. I have a wired internet connection which works fine with my windows 7. When I switch to Ubuntu, when internet cable is plugged, the top right corner, network manager shows connection is established, but when I open firefox I cannot access internet. I tried searching on forums, but I could not make it work. If I type ifconfig command in terminal attached is the output I get, I dont know what is the problem. I want to use Ubuntu than Windows
I want to connect to the internet on my fedora core 6 OS, i am using an adsl modem(Model no. : SmartAX MT841) which requires setting up a username and password. I am a newbie to linux, so i am clueless and just cant stop wondering what to do!
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
My friend is trying to share his clearwire connection with me using Windows ICS. Using network-manager or wicd, I am unable to connect to his share. I am able to connect unencrypted with iwconfig, to the ad-hoc network, and then use dhclient to gain ip address.
I am not able to connect to WPA encrypted share using network-manager or wicd. nm-applet crashes when trying to connect. I am attempting to setup wpa_supplicant, but haven't got it working yet.As usual, the wireless networking out of the box experience in Ubuntu doesn't work. This is extremely frustrating. If Ubunut's goals are to be the default desktop, then these guys need to get wifi that "Just Works"...
I have an ASUS G50Vt laptop with Ubuntu 10.04 installed on it. I have a WiFi Link 5100 wireless device. I use these settings to connect to it:URL...My problem is, once I connect, within 30 seconds I lose my Internet connection. It goes on and off seemingly whenever it wants. Is there something I'm missing? Some kind of driver issue or something else I need to change?I can connect to the non-secure connections fine, just when I try to use the secure one it craps out. Halp?
I use ubuntu 9.10 karmic koala as my desktop OS. My internet connection is creating problems these days, ever since I started downloading torrents for iso files. Whenever the downloads in transmission client is running, the internet gets disconnected abruptly, and even my other downloads in d4x stops. On using the plog command in the terminal, it shows the following:
I dont understand much of it, as am a new user using linux systems from only a few months ago, can't find out. Also on closing the transmission client the other downloads in d4x run perfectly well and so does my internet connection.
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
I have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.
I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"
I installed Ubuntu (10.04) today and it has gone smoothly except for the fact that I can't connect to the Internet when in Ubuntu (connection works fine in Windows XP). I am using a wireless USB card (Linksys WUSB600N) to connect.
The weird thing is that the card detects all the local networks, asks me for a password to my network, and it even says it is connected to my network after I put the password in -- but when I open Firefox no pages will load.
There is another weird quirk as well: Ubuntu will not restart or shut down properly (it hangs around indefinitely with the little white / orange dots going across the screen) unless I first remove the wireless card from the USB slot. But that doesn't bother me as badly as the lack of Internet.
Recently I had installed Ubuntu 10.04 in which I had connected to the internet by way of terminal (pppoeconf) and I could access any site with ease.But one fine day suddenly I could not access the net, I try to locate the notification icon (network manager),but could not find it.I did this and that,googled it trying to find the solution but alas to my disappointment I had to format it.
After reinstallation of Ubuntu I connect the internet by way of editing connection on panel and i could access the net. The problem is that I could not access some site especially org site e.g Home - Desiring God so can anybody guide me in how to connect in most better way.