Ubuntu Networking :: Connect To Internet Using Wired Router?
May 4, 2011
i recently connected this router to mahh modem..http:[url]....before router connection i was able to connect to internet via "pppoeconf command" but now i am not able to connect to internet from ubuntu ..i am still using lan cable coming out or router to connect it with pc..
I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
I wanted to try Ubuntu again but have gone wayback to an old 8.10 disk because I couldn't get 10.10 to work. The install with 8.10 went fine but the internet will not connect. The network manager shows eth0 grayed out and when going in to manage the connection it says 'never'. I'm using Vista with a broadband modem connected to a netgear router.
I have installed Ubuntu for the first time (version 11.04), finally making the step to open source software. Everything seems to be working fine, however I can't connect to my router via a wired connection.I can use the wireless network,hich was detected and I could connect by giving the code. But when I try to connect to this network by wired network, it tries to connect and it says "connection offline" after a while. It never establishes a connection. I used the standard automatic DHCP settings of eth0. I never got this problem with another OS and it's not the cable that's not working
I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
I am a Ubuntu novice who recently shifted completely to Ubuntu 10.04 from Windows 7 on my Dell Inspiron Mini.
1. I am able to connect to the internet ('Wired') at home but when i plug in the internet cable at work it is not connecting. It gives me the message 'Unplugged, you are now disconnected'.
2. I tried installing the Wicd network manager. Even though there are wireless networks in range it doesnt show me the wireless networks (like it used to show in wiindows).
I have read through a long list of commands in the forums of commands to be executed and executed them all but couldnt connect. Is there anything basic that I am overlooking?
I thought that wired network should work once I plug in a network cable irrespective of the place. How come I am unable to connect to the network at work? I used to have a windows 7 partition and the net connected plug and play when i was in the windows side. I dont want to install Windows just for the internet at work again.
I installed ubuntu 9.10 on my laptop a few days ago and love the OS so far. However, initially i could only get internet connection though an ethernet cord. After much internet searching, i finally figured out how to get wireless internet. Unfortunately, in setting up wireless internet, I no longer have wired internet. The system doesn't seem to recognize my wired internet anymore. I'd like a scenario where i can connect to the internet both wired and wireless.
I've been running ubuntu for about 6 months, so i'm still abit of a newbie at linux but heres what im having issues with:I'm having troubles connecting to the internet on ubuntu, i have no problems connecting on xubuntu on the same machine. I can connect to my network but i cant access the internet on firefox or snaptic or any of that, but the weird thing is i can successfully ping address' in the terminal. I can also connect to my router config page in firefox using 192.168.0.1.
My internet worked perfectly about a month ago on this ubuntu install, so i cant figure out what i did to make it stop working. I think it may have something to do with the/etc/resolv.conf file because it only exists as /etc/resolv.conf.tmp and when i run "sudo dhclient wlan0" (or eth0) it says:
ubuntu@ubuntu:~$ sudo dhclient wlan0 Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium.
currently running ubuntu 9.10, the internet connection im hooking up to is a router from a friends personal dish internet (were all deployed to Afghanistan). Here is all the static information that i need to input.now i have all this information input in windows 7 and it works fine since its all broken out exactly how it was given to me in the ipv4 settings page. wicd in ubuntu however wont use these settings.
I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
I just installed ubuntu 9.10 netbook remix (karmic koala) on my eeepc so im pretty new to linux but getting the hang of it. i was running windows before and the wireless and wired connections were perfectly fine. when i installed ubuntu, i chose it as my main system and wiped windows. now i cannot connect to the internet through the ethernet cable or wirelessly. even though i put in the right ip adress etc it doesnt work. the wireless doesnt even pick anything up so i uninstalled network manager. i installed wicd network manager and that doesnt pick anything either. BTW using a Ralink RT2860 network card.
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
i have installed fedora 15(lovelock) on my lenovo z560 ideapad laptop. in fedora 15 lovelock internet is not working by wire or wireless. Network controller: Broadcom Corporation BCM4322 803.11a/b/g/n Wireless LAN Controller (rev 01)
[amit@localhost ~]$ ifconfig em2 Link encap:Ethernet HWaddr 88:AE:1D:274:45 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
I am a beginner to ubuntu. I have installed ubuntu 10.04 on my laptop using wubi.When I am trying to edit the IP address using network editor,apply button is not highlighted.I managed to give IP as well as netmask through command prompt.But I am not able to give gateway and dns IP.Please help me configuring this.
My laptop has been working fine with ubuntu 10.04, and earlier today it shut down after running out of battery. I came to use itr and discovered that the wifi icon had disappeared from the panel bar, and it won't connect to the wireless networkor via a wired connection.I have had a play around with this, tried ping -c5 google.comresult was:ping: unknown host google.comand ping -c5 126.96.36.199result: onnect:etwork is unreachable.I have other computers connecting to this network and know that it is working fine.
I'm a beginner in Ubuntu, I'm using Ubuntu 9.10. Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
- CAN connect to other computers - ssh and vnc over the home network (via D-link 524 router). - CAN get an IP address via DHCP - CANNOT get internet connections - including router at 192.168.0.1 - CANNOT even ping router (but I get an IP address - weird) - Other computers on the network CAN access internet - Live CD could not access internet
results of ifconfig
I am wondering if his ISP could be doing this - he has received a warning letter about bitorrent. Could the isolate a single computer behind a NAT router?
This is the results from dmesg:
I have tried:
- to set proxy settings as "Direct internet connection" - disconnecting power to (including 30 sec wait): modem, router, computer + unplugging ethernet from computer - Live CD (he only had an old one 7.10) which also didn't connect to internet, but as I am remote, I couldn't do any more. We are downloading a 10.04.1 iso for him to burn tomorrow, and will try that again. - Uninstalled Crashplan which was the last software that we installed (and it was working ok).
I am currently ssh'ing into another computer on the network that IS working, and then ssh'ing into my Dad's computer - including a VNC session (tunneled through both machines and router).
I connect my internet using pppoe to may DSL modem with bridging mode, and it goes fine until I try to put a wireless router between my PC and the modem. After I configure both modem and the router, I can run my wireless network fine by connecting it from a laptop, but my PC is unable to reach the modem at this configuration.
PC has address 192.168.2.100 Router has address 192.168.2.2 Modem has address 192.168.2.1 all with netmask 255.255.255.0
With bridging configuration in modem and automatic detect configuration in the wireless router, the wireless network run well, except the PC cannot ping the Modem saying that
root@firefly:~# ping 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. From 192.168.2.100 icmp_seq=2 Destination Host Unreachable
Looks like my PC, which has Slackware 13.0, don't know how to reach the modem even they are physically connected.
1. how can I configure the modem, PC, and router so that the PC can reach the router? Do I need to do add route gateway from the PC?
2. How can I configure internet connection from the PC (before I use PPPoE)?
3. How can I configure the modem, PC, and router so that the wireless network is on?
Useing gnome network manger. I thught that is DNS resolve problem, and wrote in linksys router the same DNS as 3g huaweii modem use. Steel the some result. NO INTERNET. Change for static ip in router and try use the same gatway , but steell can't use connected at the same time to internet with 3g and local router.
Only one devace at the same time, Router have no any acces to internat. SO why 3g internet stoping working after connecting router to LAN ports? Has it some thing to do with subnet or ip range and routing table?
At work, we (like almost everyone) are still full-on windows. I am currently trying to get away from windows because I am not a fan. my current windows machine (different from my Ubuntu machine) is accessing the wireless network fine, and there are no obvious problems there. Also, my Ubuntu machine can access my wireless network at home, so I know there are no driver issues. I set up the connection for the Ubuntu machine, and it seems to be connecting OK. I can ping internal IPs and by all statuses, the connection to the router is functioning. However, when I attempt to load a web page or ping a domain or external IP, it fails. I tried to ping the IP, thinking if that worked, it's probably the DNS, but pinging both domains or IPs fails. I have looked around at forums and posts, but none of them seem to match my issue (that's probably not true, but I am struggling to see the commonality).
Here are the results of "netstat -r":
Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.45.0 * 255.255.255.0 U 2 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 default 192.168.45.5 0.0.0.0 UG 0 0 0 wlan0
And here is "ifconfig":
wlan0 Link encao:Ethernet HWaddr 74:f0:6d:XX:XX:XX inet addr:192.168.45.49 Bcast:192.168.45.255 Mask:255.255.255.0 inet6 addr:fe80::76f0:6dff:XXXX:XXXX/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
After forgetting my wifi router password, I had to reset and reconfigure the router. I enabled WEP, and after I typed the password, the computer now recognises it automatically. But I can't connect to the internet no matter how long I wait. (The wired internet connection works fine.) How can I get the wifi to connect to the internet?
I think something weird is going on. On a fresh installation of 11.04, I seem to be connected to my router just fine, but I can't reach the internet or anywhere else on my network. Anybody see my problem from what I've posted? The computer is only connected via wireless (so I don't know why eth0 would be connected as well). I can't think of what I'm missing...My system seems to be connected to my router on two interfaces. "ip addr" gives:
Code: 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
I cannot connect to internet. I just installed Fedora 12 w/ the Live CD and I have a Linksys WMP54G Wireless Card (v4.1 I believe) and it apparently installed fine upon install of fedora. It will not thought connect to the internet. It reads my connect (NETGEAR-2.4-G), my router is a Netgear WNDR3300. It worked perfectly fine on Windows XP. Like I said, it picks up my wireless connection. But when I go to connect it attempts to connect for like a minute or two then goes back to not connected.
AT&T will not help. I am trying to connect with Cable (CAT5). When I try to configure my network card with YaST here is the message received. "Unable to configure the network card becasue the kernal device (eth0, wlan0) is not present. This is mostly cause by missing firmware (for wlan device) See dmesg output for details"
I have searched and found no answer to this one. I have a Linksys DSL router BEFSR41 (wired) which works great. I recently got a Linksys Wireless-G Broadband router. Which also works great with my Dell mini 10 netbook running 10.04. I have two computers (wired) also running 10.04, what I want to do is use both routers with only one internet DSL connection. I have the wired (Master Router) connected to the wireless (Slave Router) and I fire up the Dell it sees it and connects but I can't connect to the internet. I can connect through my network and share files through all 3 machines. Do I need to reset the wireless, to enjoy the internet? If so the wireless came without instructions or CD.
I have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.
I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"