Ubuntu Networking :: XMedia It-wl542 Won't Connect, Or Connection Is Slow?

Feb 18, 2010

I just installed karmic from a live cd. When on the live cd, my USB adapter worked perfectly. But once my system was up and running, my device connection was really (and I mean reaaaaaaally) slow.As I mentioned, it's an XMedia IT-WL542.here's the output to lsusb

Code:
Bus 002 Device 002: ID 07b8:6001 D-Link Corp. WL54
when doing iwconfig I get

[code]...

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Wifi Is Fast Then Slow Then Fast Then Slow Connect Disconnect ?

May 7, 2010

My wireless seems to be fast for a good 30secs then bang takes good while to load the next page almost as if it's disconnecting and then reconnecting/scanning reconnecting. Why cant it stay connected. I have WAP PSK security here is my network setting please let me know if I should change any of them:(side not is there a way to fix this problem occuring so frequently it says on the wiki that it should only occur once in a whilce https:[url].....

View 2 Replies View Related

Ubuntu Networking :: Slow Connection Over LAN?

Jan 9, 2010

I'm running Ubuntu Karmic on my desktop machine which is connected to my wireless router (via LAN cable).

I have two laptops on the LAN as well. One is my wife's Windows 7 laptop and the other is my Ubuntu Karmic laptop.

They both connect wirelessly to the LAN and all three computers have static IP addresses assigned.

So here's the issue. The desktop serves the laptops over the LAN with Samba file sharing, SSH, VNC and DAAP.

From the Windows 7 laptop, the connection over the LAN is fine. I generally use it to connect to the Samba shares and occasionally use it for VNCing to my Desktop's....desktop. It is fast and responsive.

From the Ubuntu laptop though, everything seems very slow. Connecting to the samba shares results in a wait of at least 30-60 seconds, even if they have only recently been accessed. Once it has connected (i.e. once the share opens up and you can see files) actually opening the files themselves is delayed too, but not to the same extent.

Also, connecting to the desktop via VNC is intolerably slow, with mouse movements being so delayed that it is almost impossible to click on anything.

SSH takes a long time to connect too (up to 30 secs) but obviously once connected it is fine. In a similar vain, FreeNX connection takes a long time to connect but once the desktop has loaded it is fine too.

I can use FreeNX instead of VNC but actually like using both for different functions. I understand VNC is slower than FreeNX but over a 100Mbps LAN connection I wouldn't expect it to be slow at all.

This laptop used to be a Windows Vista/Win7 laptop prior to being replaced with Ubuntu and it was able to connect to the server with no speed problems.

View 1 Replies View Related

Ubuntu Networking :: 9.10 - WiFi Connection Very Slow

Jan 11, 2010

I've just installed the ubuntu 9.10. I have one problem with it. I have a home net in configuration: Windows XP on a cable, Ubuntu on a cable and Windows on wifi. When I'm surfing on the net on Ubuntu, Wifi isn't work how it should. It's very slow and I don't know what to do with it. Windows XP on a cable is OK, it works good. What happen and how can I repair it?

View 2 Replies View Related

Ubuntu Networking :: Wireless Connection Slow In 10.04

Apr 30, 2010

Since I've updated from 9.10 to 10.04, I'm having some difficulties to use the internet. Even though I can connect to my home wireless network, the connection is really slow. I've got a Dell Inspiron 1545, and here comes the configuration:

Code:
sussa@sussa-laptop:~$ sudo lshw -C network
[sudo] password for sussa:
*-network
description: Wireless interface
product: Wireless WiFi Link 5100
vendor: Intel Corporation
physical id: 0 .....

Apart from that, I must say that Ubuntu 10.04 is fantastic. Easy to use, elegantly designed and working perfectly on my PC

View 9 Replies View Related

Ubuntu Networking :: No More Dropping Connection But Really Slow

May 10, 2010

Lately I have been using my window's partition due to the fact that 10.04 drops my wireless signal every 5-10 minutes, but today I downloaded the new updates and that seems to have fix the issue with the dropping of the wireless connection. Now the only problem is the internet is so slow when trying to go to webpages it times out. I have opened up firefox gone to about:config and changed the necessary lines, but still dreadfully slow.

View 2 Replies View Related

Ubuntu Networking :: Wireless Connection Is Too Slow

May 21, 2010

I am running Kubuntu 10.04 (32-bit) on a Sony VAIO VPCCW23FX, when I connected to my router through Wireless the connection is too slow and random, 3 kB - 50 kB. But when connect to the router through Ethernet cable I get the normal speed 265 kB. I read many posts but can't find solution, and already updated all packages. the Wireless card is:

Code:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
the output of iwconfig:

Code:
wlan0 IEEE 802.11bgn ESSID:"zzzzplw9"
Mode:Managed Frequency:2.437 GHz Access Point: 00:25:68:9B:0D:FE
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off

[Code].....

View 9 Replies View Related

Ubuntu Networking :: Wi-Fi LED Flickers And Has Slow Connection

Oct 8, 2010

It has a button next to the power to show the wireless status, on or off. If I turn the laptop on with the wireless active, it keeps flickering between on and off states, and gives me a really slow connection.It happened in 10.04 if I booted with the wireless activated, but could be fixed by resetting the wireless. Now in 10.10, it happens constantly, and I just wont stop.My laptop is a CompaQ Altec Lansing running 64 bit.

View 9 Replies View Related

Networking :: Does Connection To Box Slow To A Crawl?

May 2, 2011

I have a linux server that has seemingly random network slow downs. This server is mainly my dvr. I'm starting to think it's a hardware problem, but that's just a gut feeling. I don't really know how to determine if it isn't.

Slow summary:SSH, HTTP, VNC incoming traffic are all affected
Outgoing traffic seems ok. I haven't tested this as much.
Rebooting mostly helps.
Stopping/starting network doesn't help
Load average is below 1.0
Updated Kernel with no change

[Code]...

View 6 Replies View Related

Networking :: Internet Connection Really Slow In LAN

Dec 15, 2008

I use Slackware 12.1 and I have a big problem that I can't solve by myself. I'm connecting to a LAN where there are almost 20 PC connected, all with static IP.

my ip: 192.168.1.205
netmask: 255.255.255.0
gateway: 192.168.1.1
DNS server: 80.58.61.250, 80.58.61.254

I configured manually it but it doesn't works well. I set up the DHCP server on Windows 2003 so I tried to configure it with dhcp too. It gives addresses from 192.168.1.200 to 192.168.1.240 there are no PCs connected with DHCP at the moment, so my IP is only mine.

My problem is the following:
bash-3.1# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:3d:1b:ad
inet addr:192.168.1.201 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:68ff:fe3d:1bad/64 Scope:Link
Up Broadcast Running Multicast MTU:1500 Metric:1
RX packets:77 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7041 (6.8 KiB) TX bytes:6282 (6.1 KiB)
Interrupt:17 Base address:0xc000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1810 errors:0 dropped:0 overruns:0 frame:0
TX packets:1810 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90500 (88.3 KiB) TX bytes:90500 (88.3 KiB)

bash-3.1# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
localnet * 255.255.255.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 1 0 0 eth0

bash-3.1# ping www.google.es
PING www.l.google.com (66.102.9.99) 56(84) bytes of data.
64 bytes from 66.102.9.99: icmp_seq=1 ttl=243 time=78.7 ms
64 bytes from 66.102.9.99: icmp_seq=2 ttl=243 time=84.2 ms
64 bytes from 66.102.9.99: icmp_seq=3 ttl=243 time=75.1 ms
64 bytes from 66.102.9.99: icmp_seq=4 ttl=243 time=82.1 ms
64 bytes from 66.102.9.99: icmp_seq=5 ttl=243 time=82.8 ms
64 bytes from 66.102.9.99: icmp_seq=6 ttl=243 time=79.4 ms
64 bytes from 66.102.9.99: icmp_seq=7 ttl=243 time=82.3 ms
64 bytes from 66.102.9.99: icmp_seq=8 ttl=243 time=75.2 ms
64 bytes from 66.102.9.99: icmp_seq=9 ttl=243 time=80.7 ms
64 bytes from 66.102.9.99: icmp_seq=10 ttl=243 time=84.7 ms
64 bytes from 66.102.9.99: icmp_seq=11 ttl=243 time=75.0 ms
64 bytes from 66.102.9.99: icmp_seq=12 ttl=243 time=82.2 ms
64 bytes from 66.102.9.99: icmp_seq=13 ttl=243 time=85.1 ms
64 bytes from 66.102.9.99: icmp_seq=14 ttl=243 time=80.9 ms
64 bytes from 66.102.9.99: icmp_seq=15 ttl=243 time=87.7 ms
64 bytes from 66.102.9.99: icmp_seq=16 ttl=243 time=87.6 ms
64 bytes from 66.102.9.99: icmp_seq=17 ttl=243 time=83.2 ms

(...)
- www.l.google.com ping statistics -
49 packets transmitted, 48 received, 2% packet loss, time 560804ms
rtt min/avg/max/mdev = 73.624/80.945/87.725/3.823 ms

It takes a lot of time connecting to a internet web site! It's really strange because downloading a file the transferring rate is good, it takes some time starting, but it works normally. I wait almost 7 seconds after seeing a web site. All the others PC's (windows xp) can connect perfectly to network using static and DHCP. Trying with another wire in another room I've got the same result. My /etc/resolve.conf is configured with the IPs specified upper in this page.

View 5 Replies View Related

Networking :: Slow Internet Connection

Jan 17, 2010

I set up my linux router as a simple NAT router. I use CentOS 5.4. When I set up ISP proxy IP in the browser of client PC, Internet access is fast. When I remove ISP proxy IP from the browser, Internet access is slow.

ISP use transparent caching but I can use manual caching as well. Clients on my network with transparent caching get slow internet access and using ISP proxy get fast internet access.

ISP announce that we can use transparent caching or manual caching.

So, I set up my linux router with squid. I set up cache_peer TAG point to ISP's proxy IP. But the problem is the same. Using my squid proxy is slow and using ISP proxy directly is fast. All other network settings are correct.

How can I improve my internet connection using transparent caching. I don't want to set up proxy IP address on all clients.

View 5 Replies View Related

Ubuntu Networking :: AR5008X Not Working - Connection Very Slow

Jan 2, 2010

I recently installed ubuntu on my laptop and the wifi is horrible. The connection was very slow and dropped every 5 minutes or so. I have tried enabling the proprietary madwifi drivers - however then it wouldn't connect at all.

View 1 Replies View Related

Ubuntu Networking :: Very Slow Connection Speeds But Okay On Win7

Apr 5, 2010

I am currently staying on a university campus in Taiwan. Internet on Ubuntu Lucid 64bit here is often painfully slow, except for connections to Taiwanese websites. I dual boot with Windows 7, and there is no problem there. For instance, I downloaded the same piece of software (Spideroak) on both Win and Ubuntu, with Ubuntu I had to try repeatedly as the download would not complete, and in the end it took several hours to download. On W7, it took 10 minutes. What is Windows and Ubuntu doing differently?

I tried disabling ipv6 for this session by running sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1, as a number of posts mention improving connection speed that way, but no effect.

I know that websites from Taiwan are working well, because I am getting my Ubuntu updates from a Taiwanese mirror: updates are fast, except for packages in the 'partner' repos (presumably not loaded from the mirror) which take hours to load, if at all. I don't want to depend on Windows for large downloads... (I don't want to depend on Windows for anything).

View 3 Replies View Related

Ubuntu Networking :: Slow/unstable Internet Connection On 10.04

Oct 27, 2010

I have Ubuntu running on my HTPC and for the longest time all this was working fine. Now all of the sudden my Internet connection is all sorts of slow. Chrome browser, transmission bt, apt-get, all have the same speed issue. I tried disabling IPv6, changing my DNS and installing all the latest updates. Nothing works.

View 1 Replies View Related

Ubuntu Networking :: Connection Randomly Seems To Massively Slow Down

Nov 30, 2010

I am running the newest version of Ubuntu on my laptop. The connection randomly seems to massively slow down. After a speed test is run it registers at .05 download and Ubuntu crashes before it gets to upload. I reboot from the crash and it runs fine for a while, then it suddenly does the same thing. The connection is running fine on my Windows 7 desktop, I don't know what is going on. In transmission the upload speeds are running at ~100kbps though. If I try downloading a mere 400kb .torrent file it stops half way through, usually at 200-300kb done, downloading at 1.2kbps the entire time. This is getting very frustrating and I really don't want to go back to Windows.

View 3 Replies View Related

Ubuntu Networking :: Windows 7 Internet Connection Very Slow

Jan 3, 2011

I bought a new Laptop 2 week ago. It works well, but internet connection ist very slow. I use cable internet speed 25Mbit/s, normal with my old Laptop (Window xp) I can DL with speeds ca.1 Mbit/s but with this new ca. 15 kbit/s (same file). too much different!!! If anyone know, how to troubleshoot this problem, please tell me. And i get a advice that i should crate a new connection using the "workgroup" model instead. I've tried to do but failed. Who knows "how to" please explain it for me.

View 3 Replies View Related

Ubuntu Networking :: Slow Internet Connection With WL-138g V2?

May 12, 2011

I've installed recently Ubuntu 11.04 and the first problem that I had was with my wireless lan card Wl-138g V2. The card was not enabled by the system, however after following one of Ubuntu's forum thread I managed to solve it, but... and there is always a but the internet speed is very low.When I had windows installed I faced the same problem and it was solved with an update in the driver, does any one experienced the same in Ubunutu? How did you solve it?

View 4 Replies View Related

Networking :: Wireless Connection Slow And Unreliable?

Sep 19, 2010

I just got a wireless card and I've been having connection issues under Linux. The chipset I have is a Ralink 2860 (the card itself is an Asus PCE-N13) and supports 802.11n speeds up to 300 mbps. I am connecting to a DLink DIR-655 router, which also supports 802.11n at 300 mbps. I get full bars when connecting to my router, and my router's connection information shows my computer connected as 802.11n with the signal at around 80%, but the data rate is usually around 5.5 mbps. (I've rarely seen it go up to 18 mbps) I can confirm this woefully slow speed with anything I try to do over the network. Additionally, my wireless connection will sometime be disconnected and network manager will often fail to connect. When it fails to connect, my router lists my comptuer with the correct IP address, so I know it is successfully connecting to the router and the router is accepting the connection, but network manager seems to not recognize this.

I am running Debian Squeeze (testing), but I have a custom kernel, which is 2.6.35 and is using Debian's kernel configuration. I have the newest firmware from Ralink's website, and I also tried the newest drivers, which made no difference. (I have since removed those drivers, since I'd prefer to use the drivers supplied with the kernel if possible, but I can install them again if necessary) I put this card in my main computer and booted under Windows, and it was able to connect with 100% signal (it's right next to the router) and at 300 mbps. I also tried it under Debian on my main computer (with the stock 2.6.33 kernel), but it only connected as 802.11g, and even at 100% signal it was only connected at 36 mbps. For comparison, my laptop with an 802.11g card and running Mac OS X can achieve the full 54 mbps at 84%.

[Code]...

View 7 Replies View Related

Networking :: Reverse SSH Connection Super Slow?

Dec 3, 2009

I am have setup a temporary ssh server to reverse ssh to remote clients. When a client has an issue I have them reverse ssh to my server and then from my laptop or workststation connect to there workstation. The problem that I am having is when I connect to them from behind my firewall from my laptop the connection is really slow but when I connect to them from the firewall it is fast. I am using Firestarter which is simply a GUI for iptables. I am trying to figure out what iptables rule is causing the connection to slow down behind the firewall.

View 7 Replies View Related

Networking :: Slow Initial Connection To Websites ?

Mar 18, 2011

My internet connection is pretty fast, but the initial connection to websites take about 4-10 seconds. Sometimes I even get a "connection timed out" error. Once and if the connection is made, the website loads up pretty quickly. I have no problems with internet speed otherwise as I get pretty good speeds for downloads and torrents.

Chrome shows "sending request" and Firefox shows "looking up" during this period of apparent inactivity.

It is not a DNS problem as I have switched DNS from my default to the OpenDNS servers. Besides, everything works fine on Windows with either DNS setup.

I have also tried switching off ipv6 by adding "alias net-pf-10 off" in modprobe.conf. I even switched off ipv6 in Firefox in about:config to no avail.

Oddly, wget seems to work fast and normally. And nslookup returns results almost instantly.

I am on Arch linux with a Broadcom wireless card.

View 8 Replies View Related

Ubuntu Networking :: Slow Internet Connection Only With System / Speed It Up?

May 5, 2010

I'm running Kubuntu 10.4, and I'm having a really slow Internet connection, with Windows everything works fine.

When I upload a file to an internal Ubuntu server the speed is ok ~15MB/s.

The problem is only with Internet Firefox / synaptic, any program using Internet. Last download done with synaptic display 18KB/s when normally it should be 500.

View 9 Replies View Related

Ubuntu Networking :: Slow Transfer Speeds And Connection Losing

May 24, 2010

My wireless network is giving me a fit. Slow transfer speeds and then I lose connection and have to reboot.

greg@greg-computer:~$ /sbin/ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:92 errors:0 dropped:0 overruns:0 frame:0
TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:10214 (10.2 KB) TX bytes:10214 (10.2 KB)

wlan0 Link encap:Ethernet HWaddr 00:16:b6:5a:9c:a5
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::216:b6ff:fe5a:9ca5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13085 errors:0 dropped:0 overruns:0 frame:0
TX packets:9600 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15268450 (15.2 MB) TX bytes:2704035 (2.7 MB)

wmaster0 Link encap:UNSPEC HWaddr 00-16-B6-5A-9C-A5-00-00-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets: 0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes: 0 (0.0 B) TX bytes:0 (0.0 B)

greg@greg-computer:~$ netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlan0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0
greg@greg-computer:~$ cat /etc/resolv.conf
# Generated by NetworkManager
nameserver 192.168.1.1
greg@greg-computer:~$

View 1 Replies View Related

Ubuntu Networking :: Slow Wireless Connection With Intel 6300

Dec 30, 2010

I want to connect to a 300mbit network (802.11n). With Windows (the same Computer) I am able to connect with full speed, but with Ubuntu Maverick (64bit), and a lot of other distros I tested, I am only able to connect with 54mbit. The builtin wireless network card is an Intel Corporation Centrino Ultimate-N 6300 (rev 35). Is this a driver Problem? I updated to kernel version 2.6.37-rc2 via ppa sources, but with no luck. I tried to extract the windows driver and started it with ndiswrapper, but i properbly made somethng wrong, because the card did not show up, though ndiswrapper said adapter available... oO?

View 2 Replies View Related

Ubuntu Networking :: Slow Wireless Connection When On Battery Power

Mar 21, 2011

I have a problem with my wireless where when running the laptop from the battery the connection is very slow. When the laptop is connected to the power supply everything is fine, but the moment it's disconnected and run on the battery the speed drops when browsing the Internet or accessing files on other computers on my network.

The laptop is a Samsung SF310
Wireless chipset is BCM4313

Code:
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01)
Subsystem: Wistron NeWeb Corp. Device 051a
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f4c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
Kernel modules: wl

In attempt to fix this I installed the latest drivers from the Broadcom site using this guide. When I enabled these drivers everything worked well. I did speed test and got the same speeds I get when connected via Ethernet:

Ping 51ms
DL 4.31
UL 0.65

So I set the drivers to load at boot using this forum post as a guide as the steps in the Broadcom guide didn't work and rebooted the laptop on battery power. The wireless connected fine, but the slow speed problem had returned. Running a speed test got the following results

Ping 235
DL 0.54
UL 0.30

So I ran iwconfig when running from battery and then from power supply.
Code:
xxxx@xxxx ~ $ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11 Access Point: Not-Associated
Link Quality:5 Signal level:215 Noise level:160
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
As can be seen the signal quality is 5 and signal level 215

Code:
xxxx@xxxx ~ $ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11 Access Point: Not-Associated
Link Quality:5 Signal level:214 Noise level:164
Rx invalid nwid:0 invalid crypt:0 invalid misc:0

And when connected via the power supply the signal level is 5 and signal level 214. There may be some kind of power saving issue, although there are no relevant setting in the BIOS and I can't see anything in the various wireless control pannels. I have other wireless drivers and there are no problem with those.

View 1 Replies View Related

Ubuntu Networking :: 11.04 Slow Wireless Connection Using Ath9k Drivers?

May 1, 2011

Since upgrading to Ubuntu 11.04 my wireless connection has been extremely slow. The same happened with 10.10. Although that was quite different. Back then everything within my network moved slowly, but now it doesn't affect my web browser. It seems to have only slowed the application centre and update manager. I am still waiting for the flash plugin to download and install for testing ....., but I am torrenting Ubuntu 11.04 right now and have actually hit the limit of my bandwidth (1.1 MB/s) whereas the speed in the software centre and update manager was in the region of 45 kb/s.

I'm not sure if this is because I have installed extra drivers found here after I did some research.

Although my web surfing is fast and stable, I would like to get my updates and applications downloading properly. Does anyone know what I can do?

From my 2-hour googling spree I know you may want the results from the command "lspci"

Code:
root@Felicia:/home/silkworm# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

[Code].....

View 9 Replies View Related

Ubuntu Networking :: Wireless Is Slow To Connect At Startup?

Mar 7, 2010

I am running 9.10 on my compaq laptop. I tried linux a couple years ago and was not impressed with it's operation on this machine (wifi didn't work, pain in the butt to make it work) but I just installed 9.10 and to my surprise, everything on this machine seems to work now automatically!

One minor annoyance though, when I boot my machine and the gnome desktop loads, it takes about 1 minute until the wireless finds and connects to my router. Granted, my SSID is set to not broadcast but I set ubuntu to find it as a hidden network and it does in fact work, just takes more time than usual to find and connect. Normally with windows, when it loaded, my wifi was present and connected immediately.

View 4 Replies View Related

Ubuntu Networking :: 11.04 Slow To Connect To Wireless Network?

Apr 29, 2011

When first starting up I am not able to get a wireless connection, network manager says that wireless is disabled. Then some time later (can be up to five minutes after starting up) it will finally start working.I have tried rfkill list all, but it shows:

0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no

[code]....

View 5 Replies View Related

Ubuntu Networking :: RTL8187B + Dlink DI-524 Give Slow Internet Connection

Mar 31, 2010

I've just installed Ubuntu 9.10 in my laptop. Everything works fine except for my wireless. It works, but much, very much slower the through RJ45, which is perfectly ok. When using wireless i can't even connect to any online messaging service and I need to reload pages oftenly. My security setting is WEP 128 bits ASCII and since I'm trying to follow the format suggested on the thread "HOWTO post a Wireless issue" I'll try to provide the infos like requested on it. Laptop brand and model (I'm from Brasil, so it's a brasilian model)

Code:

Semp Toshiba IS 1412
Wireless Card

Code:

ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
Interface

[code]....

View 9 Replies View Related

Ubuntu Networking :: Slow/intermittent Connection On Linksys Wmp600n - Wubi 10.10

Oct 28, 2010

i have just installed 10.10 under wubi, first time trying to use this network card under ubuntu. works fine on XP where it connects with good signal strength to a zyxel p-600 b/g router (my 3 other machines also connect fine to this router)

i am using WPA2, it takes 30secs to 1min to connect in the first place, then runs slowly and with intermittent disconnects, reports good signal strength in network manager.

i have been fortunate enough to have 3 machines that run ubuntu flawlessly out of the box..

View 1 Replies View Related

Ubuntu Networking :: Rsync Transfer From Client To Server - Slow LAN Connection

Dec 7, 2010

This is a recent problem, and I can't pinpoint any change/upgrade that would cause this. Rsync transfer from Client to Server:
sent 11756196 bytes received 1032741 bytes 138258.78 bytes/sec
total size is 144333466390 speedup is 11285.81
Pinging back and forth from each machine is fine. No Ifconfig errors Client, but Server has RX packet errors.

eth0
Link encap:Ethernet HWaddr 00:11:25:37:ee:44
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::211:25ff:fe37:ee44/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:41786 errors:2157 dropped:0 overruns:0 frame:2157
TX packets:34138 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:55615449 (55.6 MB) TX bytes:4737538 (4.7 MB)

What's the next step?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved