Ubuntu Networking :: Using Eth0 And Wlan0 At The Same Time?

Jul 15, 2010

I have a wired connection going to my router, which is encrypted with WPA2-PSK. That works fine. I hooked up a WUSB54G v4 (Linksys USB Wireless Adapter), and used ndiswrapper to install the drivers from Vista to make it compatible with WPA2. Also configured the /etc/network/interfaces with the wpasupplicant lingo to make it all work. So if I do that, my eth0 will not work anymore. Also on a side note my network manager stops with displaying in the top panel. Not a problem I can run /etc/init.d/networking (re)start and dhclient eth0 (wlan0) and all the other commands that are necessary to make it work.

Back to the problem, so I hook up wlan0 with the settings and eth0 stops working. I want to use the wlan0 solely for the purpose of my media server. The eth0 is there for my internet and that is it .

How can I keep 'em separated?

View 6 Replies


ADVERTISEMENT

Ubuntu Networking :: Can Same IP Assigned To Eth0 And Wlan0

Mar 23, 2011

I'm running Ubuntu Server 10.10 on a 64 bit laptop (also have GNOME installed just for convenience), and have a website up using apache2. I am wondering if it is possible to configure both eth0 and wlan0 to the same local static IP address? I would like to walk around my house and do stuff when I want and still have the website accessible, but also be able to jack my laptop back into the router when I am away, just for peace of mind.

Is this possible? If it is, do I need to do some configuring in apache2 to tell it to use another device? Is this even a smart way to get what I want done?

View 2 Replies View Related

Networking :: No Networks At All - Eth0 - Wlan0 ?

Sep 11, 2010

I just switched from Fedora 13 to openSUSE 11.3 on my laptop and so far love it...well...not quite. I'm having some major network issues. As in...no networks.

I installed everything and booted up for the first time. Everything worked great, I had wireless through wlan0 and could connect directly to my home router via eth0 with no problems. Installed a few applications and ran into some problems with hibernating/suspend modes. I rebooted and like magic, NetworkManager said networking was diabled. My WiFi light was off. Network switch on the computer didn't do anything.

I thought alright, I'll connect my ethernet cord and can go from there....problem is that won't work either. I tried searching for drivers online on my desktop, found some and transferred them via USB with no luck. They won't install. I have no idea why, or whats going on but I really need my laptop for school on Monday so it would be AWESOME to have it working by then.

Here is what I have:
Intel 5150 WiFi card
Dell Studio XPS M1640 laptop
OpenSUSE 11.3

View 1 Replies View Related

Ubuntu Networking :: Route Traffic From Wlan0 Through Eth0?

Dec 10, 2010

I'm running Linux Mint 10 . I have a wireless PCMCIA card (Linksys WPC 11 ver.3) that I've put into master mode, and I'm trying to set up my laptop as a wireless hotspot. I am very confident that I want to do this and have no interest in using a wireless router....I say that because that topic inevitably comes up with posts like this. The problem I'm having is I don't understand how to get wlan0 and eth0 to "talk" to each other...That is, I don't know how to set it up so that traffic from wlan0 goes through eth0, so that devices that connect to my hotspot can access the internet.I've seen a few guides about this, but they were either much broader in scope (i.e. much more complex), or for other distributions, etc, and it's too much for me to follow as a linux .

View 6 Replies View Related

Networking :: Bridge Eth0 And Wlan0 Connection On Ubuntu 11.04?

Jul 23, 2011

just wondering if I could get a hand with bridging my eth0 and wlan0 connection. I'm using Ubuntu 11.04 if that helps at all.

View 1 Replies View Related

Networking :: Ubuntu 10.04 Packet Forwarding Between Eth0 And Wlan0

Aug 15, 2010

I would like to pose is very specific to a system I'm assembling. I have ask for assistance from other forums and people, however the answers receive were too vague to implement.

As for my background, I am a network user able to write TCP Linux client/server applications quite easily. At a Linux system level I do not understand the necessary combination of applications and services to affect the following;

Network components;

- WiFi access point/router with four ethernet ports

- Laptop (user computer) cabled directly into the access point via a physical cable

- Second computer running Ubuntu 10.04, with one WiFi (wlan0) and one ethernet (eth0) interface. Eth0 is configured as a DHCP server with the following;

IPaddress 192.168.252.1
broadcast 255.255.255.0

Eth0 is physically connected to an IP camera via a Cross-over cable. The camera is configured as a DHCP client. This connection works perfectly from the Linux box with a KVM attached.

Wlan0 is connected wirelessly to the access point and the Laptop can access the Linux box and vice versa.

My objective is to have the

- Laptop via the access point/router connect directly to the IP camera on the Linux box via the wireless link.

- I would prefer not to make any configuration or routing changes/entries on the access point/router.

The type of response I'm looking for;

- is this possible at a macro level

- what facilities/server are required on the Linux box (I would like all configuration applied to this computer only)

- what commands need to be executed and in what order. If possible a brief explanation of why the command is needed and where it fits in the grand scheme of the solution.

This is probably a gigantic request outside what the forum usual activity.

View 1 Replies View Related

General :: Wireless Networking - Binding Wlan0 To Eth0?

Jul 7, 2010

When I type ifconfig,

I see wlan0 and eth0. I want to somehow bind these two together into one device.

How would I go about doing this?

View 3 Replies View Related

Fedora Networking :: Hostapd - Create A Bridge Between Wlan0 And Eth0

Feb 3, 2011

what i want to do is

client <--> wlan0 <--> computer <--> eth0 <--> internet

i have 2 network connections eth0 wired connected to internet wlan0 wireless (work fine) i have installed hostapd with madwifi and so on oki when i run hostapd the clients see the hot spot oki clients connect with wpa oki network manager run at demand not automatic (keep it for internet help) now i'm a bit lost what do i need is wlan0 give the client an ip (dhcp demand) create a bridge between wlan0 and eth0 steps to create a permanent bridge between wlan0 and eth0

View 2 Replies View Related

General :: Arch Does Not See Wlan0 Or Eth0

Aug 12, 2011

On a new Dell Lattitude e6400, I have installed both arch and Ubuntu. Ubuntu recognized wifi and ethernet right away and connected and is working fine, but in arch, I am having more problems then I usually do when using arch. From the output of lspci the ethernet is a intel device 1502, I have researched this and found it to need the e1000e module as its driver. I modprobed this module sucessfully, but no ethernet. With wlan, i have found that the card is a DW1501 Wireless-N WLAN Half-Mini Card that has a broadcom 4727 chip in it. I downloaded the windows driver for this chip and isntalled it with ndiswrapper but this did not help. What I think is the root of the problem is the error message that restarting networking creates.

Quote:

Dell only supplies drivers for ubuntu, but it should still be possible to get this to work. I have tried booting various live distros that I had drives for and I found that the parted magic boot disk saw the ethernet port and was able to connect to ethernet, and that the ubuntu live disk was able to connect to both wifi and ethernet. Somehow they must be seeing the prescense of the hardware in a way that I have not tried with arch. Please help, I really need to get this computer workign with arch.

View 1 Replies View Related

Fedora :: Way To Get Conky To Show Only Eth0 Or Wlan0?

May 24, 2010

Is there a way to get conky to show only eth0 or wlan0? My configuration only shows the wireless bit when wifi is switched on but shows eth0 all the time.

Temperature: I have nvidia card with drivers from rpm fusion, can conky give me the temperature of the card and the cpu?

View 6 Replies View Related

General :: Eth0 Wlan0 - Net.lo Doesn't Start

Jun 25, 2010

In an attempt to set up wireless so I could connect to the university network, which I think I probably should have just downloaded network manager or something but I didn't, I tried to put things in /etc/conf.d/net and some other places and I am afraid I'm not sure exactly what (and I have learned my lesson! I will pay attention to what I am doing so I can undo it next time I mess around with stuff!)

Anyway, the long and the short of it is now, when the computer is starting up and its doing the init stuff net.lo doesn't start. Later try and start net.lo or net.eth0 you get told "not enough arguments"

View 3 Replies View Related

Ubuntu Networking :: Ignoring Unknown Interface Wlan0=wlan0?

Jun 6, 2010

Also having this problem on Ubuntu 10.04.If I do "iwlist scan" I can pick up networks on wlan0:

Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.

[code]....

View 2 Replies View Related

Ubuntu Networking :: 10.04: Unable To Use Eth0 And Usb0 At The Same Time?

Nov 20, 2010

I have no telephone connection at home, so I use my cellphone to connect to the internet. Network manager reports this interface as a "wired connection", usb0, using the cdc_ether driver.I also have a router at home, so I can connect my netbook to my desktop wirelessly. My desktop computer connects to the router via ethernet connection, and network manager reports it as eth0.

When I had Ubuntu 8.04 installed on my desktop, I could use my phone, via usb0 interface, to connect to the internet at the same time as using the router on eth0. But now I have 10.04 on the computer, and it won't let me use both interfaces at the same time: I have to unconnect the router before I can use usb0.

View 1 Replies View Related

Ubuntu Networking :: Get "wlan0" And "eth0" Interfaces To Start At Startup?

Jul 3, 2010

Quick question guys and gals: How do I get "wlan0" and "eth0" interfaces to start at startup as as well as for "dhclient" to obtain an IP address automatically for "eth0?"

View 7 Replies View Related

Slackware :: Configure System To Start Wlan0 Instead Of Eth0?

Nov 29, 2010

I'm running Slackware-13.1 on my laptop. Connection to my network is via wlan0, a cable in most cases not pluged in.When starting the system the first attempt to configure the network is via eth0, which ends with dhcpcd timing out since there is no cable pluged in. Afterwards wlan0 is set up properly.

I have installed ifplugd, which is a daemon who connects to ethernet only if a cable is connected. With Gentoo this works out of the box. With Slackware ifplugd is started after rc.inet1 (probably). So the the system still tries to connect via ethernet before connecting to the wireless network.

I have also installed wicd.How can I manage that wlan0 is prefered over eth0?I noticed that neither wicd nor ifplugd belong to the default full installation of Slackware and therefore assume, there must be a solution which meets my requirements without even one of both programs.The laptop is only used at home. Wireless connection is normaly used. I need eth0 only in a case of emergency.

View 2 Replies View Related

Fedora Networking :: Bring Up Wi-fi PCI Card (ifup Wlan0 Or Ifconfig Wlan0 Up) Whole PC Just Hangs Until Power It Off

May 20, 2009

When I try to bring up my wi-fi PCI card (ifup wlan0 or ifconfig wlan0 up) my whole PC just hangs until I power it off.

I believe I have the right drivers, but cannot see what I am doing wrong.

I'd really prefer not to go down the ndiswrapper route.

Firstly, I can see the PCI card and the driver it is using :

Code:
[J@gx260-f10 ~]$ lspci -k
...
...
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)

[Code]....

the PC just hangs for ever. No mouse movement, ctrl-alt-del, nothing.

I have downloaded a Linux driver from Realtek but it will not compile. I have the latest kernel-devel, headers, and gcc. I can post compiler errors if anybody would like. They're all apparently to do with missing parameters.

View 6 Replies View Related

Debian Configuration :: Creating A Network Bridge From Eth0 To Wlan0

Jan 18, 2016

I am very new to linux.I have a network camera which only has an Ethernet port but no WiFi. Sadly no Ethernet port is available close to the camera.

Therefore I now bought a raspberry pi and installed raspbian to create a bridge into the wireless network, for connecting the camera to the internet.I now played around with the interface- and bridge configuration but I have problems with it.This is how my interfaces file looks like:

(The WiFi is secured with WPA2 Enterprise)

Code: Select all# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

[code]....

The WiFi is connection works fine and I am in the internet using the WiFi.But I am wondering about eth0. The network parameters I specified are not the same as the parameters ifconfig tells me.Ip, Broadcast, Mask, nothing is as specified.It would be nice to give the camera a static IP that I can access it always with the same IP from the RaspberryPi.The Raspberry Pi itself gets always a new IP from the WiFi network. How do I get the camera into the internet using the existing connection of the Pi?

View 6 Replies View Related

OpenSUSE Network :: 11.2 X64 Webpages Load 5x Slower On Eth0 Than Wlan0?

Jan 8, 2010

currently on an acer aspire 5532, and using mozilla and google chrome. webpages take about 10-12 seconds to load using the ethernet, wifi its about 2-3 seconds. using eth0 loading videos - broadcast yourself. in chrome, will sit at "resolving host" for about 10 seconds before bringing up the page. you would think eth0 is faster than wlan0, but for browsing the web its slower. i tested the speeds at speedtest.net - the global broadband speed test and both wlan0 and eth0 get the max speed my internet provides.i never downloaded drivers for the ethernet card or wifi, they worked so i didn't try to mess with them. but perhaps that is my problem?

code:
# lspci
00:00.0 host bridge: advanced micro devices [amd] rs780 host bridge

[code]....

View 6 Replies View Related

OpenSUSE Network :: Kernel Device Eth0,wlan0 Are Not Present?

Feb 27, 2011

I have installed Open SUSE in my DELL server which has 2 broadcom NIC cards, it showing both the NIC cards in Network configuration in YAST ,but it showing as not configured and not connected . Kernel device eth0,wlan0 are not present. In device manager also 2 Broadcom nic cards are detected.

View 4 Replies View Related

Fedora Networking :: Having Terrible Time Getting IP Address For Eth0

Dec 19, 2009

I am trying to get networking up on an old PII which I have successfully installed with FC4. There is a link and activity on the onboard interface because I see the indicator lights. The controller is a 3Com PCI 3c905 Boomerang 100baseTx @ 0xdc80.The only message returned by dmesg about eth0 is "Dropping NETIF_F_SG since no checksum feature."The driver module, 3c59x, is loaded as well as the mii module that depends on it.There is something about "unknown parameter`irq'" in the dmesg text regarding the driver.I noticed that eth0 is sharing an IRQ with the UHCI Host Controller.That should not be a problem, but it should not be necessary. And I could do away with USB if this is a conflict and that is the easiest way to solve it.When I drop to console at runlevel 3, and call dhclient, which is installed, I get a message telling me there is no reply to the dhcp request.I don't think the problem is on the router/switch side.

View 5 Replies View Related

Fedora :: Missing /etc/sysconfig/network File And Eth0 And Wlan0 Files?

Oct 31, 2010

I just installed Fedora 13 on a new Dell XPS desktop and some of the networking files are not created/missing. The computer has Broadcom Gigabit wired card and Asus PCE-N13 wireless card. When I type lspci, I see that Network conroller: RaLink RT2860 and Ethernet controller: Broadcom BCM57780 Gigabit Ethernet. So, somehow they are being detected by the OS, but I am not sure if the drivers are installed or why some of the network files are missng.

View 1 Replies View Related

Networking :: Multiple Ethernet - LAN - Cant Connect To Both The Eth0 And Eth1 At The Same Time

Dec 12, 2010

I have 2 LAN ports. one from the motherboard (on board) and the other from a lan card i bought a few days back. one is use for browsing the net, the other for a media player.

problem is i cant connect to both the eth0 and eth1 at the same time. i have to disconnect one of them to connect to the other. and this really gets irritating as it doesnt always work as flawlessly as it should. what am i doing wrong?

Output of "ifconfig":

Quote:

I'm on ubuntu desktop 10.10 64 bit.

View 8 Replies View Related

OpenSUSE Network :: Networkmanager (eth0 And Wlan0) And Ifup Wifi Not Working After Monster Update?

Jul 13, 2011

I've had 11.4/KDE working pretty well on dual boot Asus G73SW for a few weeks now. Only issues were the FN-* functions that control keyboard lights and whatnot but no biggie since the essential worked.The last couple of days the update notification was indicating 1,201 updates to be made. Yeah it seemed extreme but I googled around and checked the forums and there was nothing related. I figured I might be missing some packages since I installed from the live KDE CD (still 1202 updates!!!???). So I updated. Big mistake!!!!! Ever since NetworkManager cannot connect to the internet, be it wired or wireless.

Initially it could not even see my home network but it picked it up after I removed the plasmoid from the panel and reinstalled it. However it doesn't respond when I click the network icon and still no connection.I managed to get eth0 working with ifup but not wifi. The last part of network manager log file is quoted below. I can send the whole thing to whoever is interested. I can't make sense of it but maybe someone on the forums can.

Code:
Jul 13 11:09:08 linux-yy10 NetworkManager[1649]: <info> NetworkManager (version 0.8.9997) is starting...

[code]....

View 9 Replies View Related

OpenSUSE Hardware :: Realtek NIC Installation - Unable To Configure The Network Card Because Kernel Device (eth0, Wlan0) Is Not Present

Nov 30, 2010

Installed a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not

The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig

View 9 Replies View Related

OpenSUSE Network :: Network Bridge Betw/ Eth0 And Wlan0?

Dec 24, 2010

I'm new to this forum site and I was wondering how can I bridge a network between the eth0 and wlan0 connections?my eth0 NIC is a RealTek RTL8111B 10/100/1000 Ethernet Card (OnBoard) and my wlan0 NIC is a RealTek RTL8187B 802.11b/g WiFi USB Adapter Card.Are there any utilities, such as bridge-utils that I can use, except for Firestarter since Firestarter states that the eth0 connection is not established, or do I right-click on the network icon and select Edit Connections and go to Auto eth0 and under the IPv4 Address setting and select Shared to other computers and run a live connection there?The main reason is that I need an Internet connection for my Xbox 360, which is connected to my Linksys WRT54G 802.11b/g Wireless Router, that has DD-WRT firmware installed and 4 WiFi hotspots for any wireless device, such as my PSP, DS, DS Lite, Wii, Laptop(s), my brother's PC (needs a WiFi card), and my dad's PC (needs either a WiFi card or an Internet connection from my brother's computer to my dad's PC)

Here are my Computer Specs:
ECS nForce6m-a Motherboard
2GB DDR-800 PC6400 Memory

[code]....

View 6 Replies View Related

Networking :: Eth0 Fixed IP - Eth1 DHCP Gateway - Access To Eth0?

Aug 19, 2009

5.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.

I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.

Code: echo !HH | nc 192.168.1.6 80

I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?

View 17 Replies View Related

Networking :: Production Server With Static IPs On Eth0 And Eth0:1 - Getting Private LAN On Eth1?

Jul 1, 2010

I have two servers on a vlan at my datacentre/colocation and previously both servers had public IPs on their eth0 interfaces. The servers are HP ProLiant DL360s - one is a G4 and one is a G5 The newer G5 is now the LAMP server and the G4 has been retired and I want to repurpose it as an iSCSI target using openfiler freenas or similar.

My G5 has public/static IPs lashed to the eth0 physical interface and the eth1 is not configured to do anything yet. The G4 will have both interfaces available - perhaps one for ssh access from one of my static public IPs and the other to be a private IP on the local vlan. Here is what I am trying to get my head around...

The G5
eth0 - Public IP - full LAMP services on two or three virtual interfaces
eth1 - Private IP 192.168.0.1
The G4
eth0 - Public IP for ssh
eth1 - Private IP 192.168.0.2

Because my traffic between eth1 on these boxes is via private IPs on the local private vlan it doesn't add to my quota for bandwidth. How do I go about configuring the routing and gateways and other aspects of this so that I can run a private IP space network between the eth1s and still serve the outside world from the eth0s...

I am afraid that if I assign the private IPs to the eth1 interfaces the routing may either not work or interfere with the access to the production internet facing interfaces (eth0s).

View 10 Replies View Related

Networking :: Ignoring The Unknown Interface Eth0=eth0?

Dec 18, 2010

I'm running a dual boot Ubuntu 10.04/Backtrack 4 (Ubuntu 8.10) system. I can get internet in the BT4 side but not in the Lucid side. In Lucid I can ping my router, and the network manager says I'm good to go, but I can't get to any web sites. It all started when I tried to put my laptop on another network by mimicking the settings of a computer I had just unplugged from the network. MAC address and all.

ifconfig eth0:

Code:

eth0 Link encap:Ethernet HWaddr 00:1f:16:ba:4c:8c
inet addr:10.136.9.147 Bcast:10.136.9.159 Mask:255.255.255.240
inet6 addr: fe80::21f:16ff:feba:4c8c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[code]....

View 3 Replies View Related

Ubuntu :: Network Eth0 Not Up At Boot Time?

Oct 27, 2010

I have to manually enable the Network interface eth0 at boot time by running:

[code
sudo ifconfig eth0 up
[/code]
Any ideas how to enable it at startup.
Here is my /etc/network/interfaces file

[Code]...

View 3 Replies View Related

Ubuntu Servers :: 10.10 - Setup Eth0 With Subdevice Eth0.0 And Eth0.99 To Come Up At Boot

Apr 22, 2011

im trying to setup eth0 with subdevice eth0.0 and eth0.99 to come up at boot

eth0 is dhcp clint
eth0:0 is static ip
eth0.99 is 802.1q vlan interface
/etc/network/interfaces
Code:
auto lo
[Code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved