Ubuntu Networking :: Unable To Get ASUS USB Wireless To Connect For Network?
Jan 4, 2011
Running Ubuntu 10.04 Unable to get Ubuntu to find the ASUS USB Wireless to connect for network. I got the Broadcom to work using ndiswrapper but the range on it is unbearable meaning I have to be in the same room as the router. Hoping this has a much better range.
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci 00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
This is baffling me but I am easily baffled/baffeld? I carefully followed these instructions to install a a working driver http://ubuntuforums.org/showthread.php?t=760568. It all went fine, my wireless light came on and it detected my wireless network. I know my WPA2 code (I can connect on the same computer in windows 7) and my keyring code. but I still can't connect it whirs away for quite a while before giving up and saying not connected.[Code]....
I installed 11.04 ubuntu 2 days ago. I have had thousands issues trying to connect to my wireless network router dlink di524. My wireless card is a dlink dwl g122 ver c1. I can't connect to the network no matter what configuration I try.
- first time i tried to connect i had static ip settled on my router so I tried to configure Network manager from GUI. I couldn't connect; it kept trying to connect forever. so I completely removed from terminal NM (using guides on internet) e installed wicd: same problem. Tried to configure manually network/interfaces file. Didn't work. Reset router and set dhcp . Tried everything again first with NM and then wicd. Didn't solve. Reinstalled ubuntu, fearing I messed up with some configuration files and reset again router. No solution
Tried pinguy os, zorin e linux mint . Nope Borrowed a network card from a friend after reading dlink dwl g122 could have some issues with linux. Tried this realtek card : same problems as above. Finally I tried again after the fifth reinstallation of ubuntu. Both NM and wicd keep saying wrong password. Changed different password. Password is fine of course (i'm using it now with win) So I Reset router password to none. Now it says: "acquiring ip address" and keep saying that forever. So i tried the last attempt: I tried to connect from zorin5 live to the same wifi network.. Ok so I happily reinstalled everything again (zorin5). first access after installation: same problems as above
Now I'm using win7 on the same wifi network, router, and same card (cards) and everything works fine at first attempt.
I have a Dell Inspiron 1525. I am unable to connect to wireless networks. I have a fresh installation of Ubuntu 8.04. I have installed Ndiswrapper (ndiswrapper-utils_1.8-0ubuntu2_i386.deb) and the GUI for ndiswrapper. The ndiwrapper GUI reports that the hardware was not found. Yet I am able to connect to the wlan using Windows.
I am unable to connect to any network, wired or wireless. Network-manager and wicd are both gone, as in no longer installed. Please don't tell me to apt-get anything. I have no network connection. I have tried downloading packages for nm onto a usb stick only to find myself in dependency hell which ended with the impassible error "Requires installation of untrusted packages".
Currently I'm having trouble connecting to the guest wireless network at my work. I've read through a couple threads that seem similar to my problem. I tried going through the terminal window and following the instructions that was offered to others. I'm just wondering if my hardware is different, if I need drivers, if my permissions aren't correct.
1. I recently received a Sony Vaio laptop model # VGN-FE770G from a friend, and I'm enjoying running Ubuntu.
2. I followed another thread that suggested to change some lines in /etc/network/interfaces, but I don't have permission to edit this file. I don't really have the need to set up multiple users on my laptop, so how can I change my permissions to root? (Or is it a good idea even?) Should I log in as root?
3. How can I set my laptop up to be flexible with network selections, using hardware: (built-in camera and microphone for example), and useful applications?
I haven't been able to find anything really useful on google either. Was hoping you guys could point me somewhere or explain a process that might work. What I've tried so far is downloading the driver from ralink and trying to follow their procedure for getting it setup. Following the readme I get lost at step 3 and attempting to make it, I get:
[boardbox@niflheim ~]$ cd Desktop/2010_07_16_RT2860_Linux_STA_v184.108.40.206 [boardbox@niflheim 2010_07_16_RT2860_Linux_STA_v220.127.116.11]$ make make -C tools
but this hasn't fixed my problem either. I can see networks but I can't connect to anything, so kinda still stuck at square one.
EDIT: Turns out in frustration and absent-mindedness I didn't reboot and that fixed it.
I just got a new Asus Eee 1001P, and the wireless isn't working at all. I had an Asus EEE 1005HA before that and since both use the AR8132 network card I hoped it would be the same problem as with that, where installing the backports fixed the problem. However, that doesn't do anything. With the 1005HA the connection was only flaky and disconnected a lot, but the 1001P doesn't find any networks to connect to at all. Also, the mobile wireless will connect only once and after disconnecting every attempt to reconnect ends in that connection symbol spinning wildly until I tell the network manager to disconnect. On Kubuntu it doesn't even connect once.I never had that problem with the 1005.
I have just purchased an Asus EeePC 1001HA netbook and I would like to install Ubuntu Netbook Edition 9.10 (love the look and the brilliant interface), but I can't get the wireless network to work. I am currently running from a 4Gb USB stick that has the LiveCD on it with a 1Gb persistence. The network notification area only shows wired and VPN connections. I have tried installing the Ralink 3090 driver but I have had no luck in getting the wireless to work.
I am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
I have just installed Ubuntu 10.04 on my HP Pavilion dv5. My laptop has a Broadcom 4312 wireless adapter. The driver for the adapter was installed by Ubuntu as a proprietary driver. The wireless light is on and I can see the available networks, but I am unable to connect to my network. The correct authorization is set(WPA/WPA2) and I have entered the passphrase correctly.
I am able to connect to the wireless network successfully from my Windows login(that is how I confirmed that the passphrase is accurate). The network shows that it is trying to connect, but the wireless authentication dialog(asking for the passphrase) keeps popping up. Incidentally, the same thing happened when I tried openSuSe and Fedora on a spare laptop. The windows systems can connect, but not the Linux systems.
I've just installed 11.04 Natty on an old Laptop (Dell Lattitude C400) and am unable to connect to my home network (wired LAN connection, no wireless). The laptop previously had WinXP installed and was able to connect (I have also double checked the cables and ports and they're all functioning ok).
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
I was told by an experienced Linux user/IT professional that older Broadcom wireless cards had embedded code preventing access through non-Windows OS's. I was told that there were drivers that were basically "hacks" for skirting this issue. I've tried two different drivers and neither seems to be doing the trick. My current driver is the "Broadcom STA wireless driver".
Recognizes my network and others Says it's connected Won't load any web pages Frequently asks for authentication I've authenticated using my network password and my router's security key
Here's what the terminal says about my wireless card:
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. code....
I'm unable to connect to a particular home wireless network under Fedora 9, although I can connect to it using WinXP on the same machine. My Fedora installation is able to connect to my college's unsecured wireless network, so it's not a driver issue I think.It seems to be an authorisation issue, as I'll describe below, but there's one other thing that's bothering me. The SSID for the network I have problems with is for some reason not listed in Network Manager's drop-down list, nor is it in the output of iwlist wlan0 scan. But I'm pretty sure it's not a "hidden" network - I don't know exactly how those work, but I helped the owner of the wifi network in setting it up, and don't remember doing anything that would make it hidden. As far as I can remember, Windows found the network automatically without having to be told the SSID. What's the best way to confirm whether it's a hidden network or not?
Anyway, I try to connect by selecting connect to other wireless network in Network Manager, and entering the SSID. As far as I can tell from the error messages below, the machine does contact the network and attempt to connect, but I'm not authorising myself properly. That may be a completely wrong diagnosis, but hopefully someone can see from the below info whether it's correct or not.I'm not sure which option to use for "Wireless Security": at the time we set up the network, it gave us a Hex WEP key of 26 characters, which is 104 bits. But none of the options in Network Manager's list match that. Here are the options it has, and the error message I get with each one:None - if I select this, it fails to connect, with no error message. WEP 128-bit passphrase - if I select this and attempt to use my 26-character WEP key, it brings up a new dialog, saying "Passwords or encryption keys are required to access the wireless network [SSID]." It has a drop-down box labelled "Wireless Security", but this time the only option is "None", and the connect button is disabled, I can only click cancel. WEP 40/128-bit hex - as above. WEP 40/128-bit ASCII - The connect button is disabled when I try to use the WEP key, as the string is too long. Despite the fact that it says 40/128-bit, it actually accepts 5 and 13-character strings (40 or 104-bit). Since I've got a 104-bit hex key, I tried converting it to ASCII, but it consists of mostly unprintable characters, so I'm not sure there's any way to actually enter it into the textfield. I might have done something wrong here, so I've put my code below to see if anyone can point out a mistake. LEAP - requires a username, not applicable here I think. Windows doesn't need one, and we don't have one from when we set the network up.Dynamic WEP (802.1x) - requires username, private key and various other things, all N/A WPA & WPA2 Personal - Brings up a dialog with the same text as for "128-bit passphrase", but this time "WPA & WPA2 Personal" is the only option in the drop-down list, instead of "None". It asks for a password, so I just enter the hex key again - now it asks for the password for the Gnome Default Keyring, which I don't think I've ever set up. Don't know if I can go any further with that, but my understanding is that since we were given a WEP key when we set up the network, WPA will be N/A.WPA & WPA2 Enterprise - as Dynamic WEP. N/A.Hopefully that's enough info that someone can help diagnose the problem. Some of the behaviour of Network Manager described above doesn't make sense to me, and I'm wondering if it's buggy.
I just dual-booted my Acer Aspire 3810TZ laptop with Ubuntu 10.04. When I first tried to connect to my home wireless network, it connected fine. However, now whenever I start the laptop, it will not connect. The network appears in the available networks list, but it fails to connect. I know the network is ok, because I can still connect to it fine from Windows.
My network adapter is Intel Wifi 1000 BGN. Apparently (from [URL]) the drivers for this card should be part of the distribution.
I can't understand why it connected once, but (without any changes to the system at all) it won't work now.
Under OpenSuse 11.2 i cannot connect to my wireless network. Sometimes computer doesn't see network, sometimes computer cannot connect to it. Encryption: WPA & WPA2 Personal Kernel driver: ath5k Also I am embarrassed that in lspci and yast written various models of my wifi adapter.
I have had a router die on me and have bought another (maybe a bad buy!) The new router is Linksys WAG120n. Ethernet is fine. Laptop wireless adapter is Atheros AR5009 802 11a/g/n. I have setup a wireless connection but it is not connecting to it. I have checked the router settings and these seem to be OK! I'll try to give any details required.