Ubuntu Networking :: Unable To Connect (wireless) Since Upgrade To 11.04
Jul 19, 2011
What has changed to the wireless function and possibly the use of the ndiswrapper in 11.04.
I originally install ubuntu 9.10 and immediately upgraded to 10.04. I have just now decided to upgrade to 10.10 and then to 11.04. Everything went ok and all still worked fine up until the upgrade to 11.04.
I've checked my settings and they are fine. The power light is still on my wireless card but no connection?
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I just dual-booted my Acer Aspire 3810TZ laptop with Ubuntu 10.04. When I first tried to connect to my home wireless network, it connected fine. However, now whenever I start the laptop, it will not connect. The network appears in the available networks list, but it fails to connect. I know the network is ok, because I can still connect to it fine from Windows.
My network adapter is Intel Wifi 1000 BGN. Apparently (from [URL]) the drivers for this card should be part of the distribution.
I can't understand why it connected once, but (without any changes to the system at all) it won't work now.
I've been using fedora on my Lenovo R61i since I got it...I believe the first version I used on this laptop was f10. I always try to keep it on the latest distro and I also enjoy a clean install every year or so. One thing I was always impressed with was how quickly I could go from sleep to back up and online. So I decided it was time for a clean install this weekend to fedora 15. Now when I wake it up (open the lid), it takes over a minute for the wifi to connect again. This hasn't been the case for the last 4 distro's so I'm wondering what I can do to speed that process back up, is there a particular package I can downgrade or is this something on their radar already and I should just wait for an upgrade?
I have an out-of-the-box Belkin G wireless router. I also have a Linksys USB adapter on a particular box. When I run the Ubuntu 8.10 live CD on that box I can see the router's SSID, I supply the password, and all is fine. I think that rules out any problems with the router or the ISP.
When I run the Ubuntu 10.04 on that same box I can still see the SSID but when I try to connect to it the DHCP fails. Checking the system logs I see the DHCPDISCOVER entries but no corresponding DHCPOFFER responses. So this seems on the surface to be a DHCP problem. To get around this I tried to edit the connection to use manually supplied settings. On the 8.10 system I supplied:
and again all worked just fine. But when I supply the same values to the 10.04 system it does not work. Even attempts to ping the router (192.168.2.1) fail. So if this fails then perhaps the problem is more fundamental than DHCP? I have tried searching the net for quite a while and found a number of similar problems, but clear solutions seem to be lacking (or I haven't come across them). One common suggestion is to blacklist the ipv6 module. I tried that and it seemed to have no effect. Since this worked so well in 8.10 and doesn't work in 10.04.
This is baffling me but I am easily baffled/baffeld? I carefully followed these instructions to install a a working driver http://ubuntuforums.org/showthread.php?t=760568. It all went fine, my wireless light came on and it detected my wireless network. I know my WPA2 code (I can connect on the same computer in windows 7) and my keyring code. but I still can't connect it whirs away for quite a while before giving up and saying not connected.[Code]....
I have had a router die on me and have bought another (maybe a bad buy!) The new router is Linksys WAG120n. Ethernet is fine. Laptop wireless adapter is Atheros AR5009 802 11a/g/n. I have setup a wireless connection but it is not connecting to it. I have checked the router settings and these seem to be OK! I'll try to give any details required.
I ve just install ubuntu 10.10 and am unable to connect to wireless connect. I was able to connect on the try ubuntu before install option. I have dual booted Windows 7 and Ubuntu 10.10. I have tried connecting without the WEP key and still no luck. Just found it strange that connect on try it but not after full install.
At the very begging of my ubuntu experience (2 days ago) I was able to check the "Enable Wireless" bar up in the top right corner, but I was unable to connect any wireless networks, cause none would show on the list. Using nm-tool i get this info:
I installed 11.04 ubuntu 2 days ago. I have had thousands issues trying to connect to my wireless network router dlink di524. My wireless card is a dlink dwl g122 ver c1. I can't connect to the network no matter what configuration I try.
- first time i tried to connect i had static ip settled on my router so I tried to configure Network manager from GUI. I couldn't connect; it kept trying to connect forever. so I completely removed from terminal NM (using guides on internet) e installed wicd: same problem. Tried to configure manually network/interfaces file. Didn't work. Reset router and set dhcp . Tried everything again first with NM and then wicd. Didn't solve. Reinstalled ubuntu, fearing I messed up with some configuration files and reset again router. No solution
Tried pinguy os, zorin e linux mint . Nope Borrowed a network card from a friend after reading dlink dwl g122 could have some issues with linux. Tried this realtek card : same problems as above. Finally I tried again after the fifth reinstallation of ubuntu. Both NM and wicd keep saying wrong password. Changed different password. Password is fine of course (i'm using it now with win) So I Reset router password to none. Now it says: "acquiring ip address" and keep saying that forever. So i tried the last attempt: I tried to connect from zorin5 live to the same wifi network.. Ok so I happily reinstalled everything again (zorin5). first access after installation: same problems as above
Now I'm using win7 on the same wifi network, router, and same card (cards) and everything works fine at first attempt.
Firstly, the actual problem I'm having is that when I start my computer (netbook) up in the morning and try to connect to the router (wirelessly) it just... doesn't work. I've used it before, at full signal strength, and it was completely fine. It never disconnects me or anything - but if I shut down my computer, like I do overnight, when I start it up again often it's hardly getting a signal at all (or so it says) and when it tries to connect it makes the connecting animation and occasionally flashes to a circular thing like firefox's loading animation. Eventually it just fails.
I try restarting my computer, but it doesn't seem to help. The last time, I had to wait until the signal looked "full" again, then delete the settings in "edit connections" for that router and only then would it let me log in again, even though I was using the same password from the same computer (even in the same place). That only seems to help when the connection looks "full" though, and even then, not always. Normally I'd try resetting the router, but I can't because it's locked in the next room (I rent a room here and the guy with the key is rarely around) but honestly I don't think the router is causing this, for a few reasons:............
When I try to connect to any Wireless Networks in Fedora, the option at the top of the screen is grayed out. I can only connect to VPN, a hidden network, or create a new wireless network. My wireless works fine on the Vista side, so I am a bit confused at this
I have a Dell Inspiron 1525. I am unable to connect to wireless networks. I have a fresh installation of Ubuntu 8.04. I have installed Ndiswrapper (ndiswrapper-utils_1.8-0ubuntu2_i386.deb) and the GUI for ndiswrapper. The ndiwrapper GUI reports that the hardware was not found. Yet I am able to connect to the wlan using Windows.
I am unable to connect to any network, wired or wireless. Network-manager and wicd are both gone, as in no longer installed. Please don't tell me to apt-get anything. I have no network connection. I have tried downloading packages for nm onto a usb stick only to find myself in dependency hell which ended with the impassible error "Requires installation of untrusted packages".
Running Ubuntu 10.04 Unable to get Ubuntu to find the ASUS USB Wireless to connect for network. I got the Broadcom to work using ndiswrapper but the range on it is unbearable meaning I have to be in the same room as the router. Hoping this has a much better range.
Currently I'm having trouble connecting to the guest wireless network at my work. I've read through a couple threads that seem similar to my problem. I tried going through the terminal window and following the instructions that was offered to others. I'm just wondering if my hardware is different, if I need drivers, if my permissions aren't correct.
1. I recently received a Sony Vaio laptop model # VGN-FE770G from a friend, and I'm enjoying running Ubuntu.
2. I followed another thread that suggested to change some lines in /etc/network/interfaces, but I don't have permission to edit this file. I don't really have the need to set up multiple users on my laptop, so how can I change my permissions to root? (Or is it a good idea even?) Should I log in as root?
3. How can I set my laptop up to be flexible with network selections, using hardware: (built-in camera and microphone for example), and useful applications?
New Ubuntu user here, and I'm having difficulties connecting to my router at home. I've searched around the forum for a couple of hours now, to no avail. My router was originally not broadcasting ssid, so I turned broadcasting on. Now I can see the router, but when I enter a password (which I know is correct) nothing gets connected.
Am new, as of today to Fedora. I am unable to connect to my home wireless network. I have checked the security settings WPA PSK Personal TKIS, on the router. I have two windows PCs that are connected in this way.
The error message in Fedora 15 Network is Authentication required by wireless network. The details I have entered are correct, but no joy. Again, I am entirely new to Fedora
I'm trying to install Ubuntu 10.04 on my Toshiba A200-12U laptop (with an Atheros AR5007EG wireless card), but networking is being problematic.I entered Network Configurations and tried to get 'Auto eth0' working -- I went to Edit > IPv4 settings and filled in 'Addresses' with the details of my connection:
Address: 192.168.1.254 (the local IP of my router) Netmask: 255.255.252.0 Gateway: 126.96.36.199
I'm running ubuntu 9.10 on my desktop.Wireless networks appear on the dropdown menu but when I try to connect to my home network the authentication box appears, after typing my password the box disappears and it continues to connect but nothing happens and after a while the authentication box appears again. So.. no internetz connected.