Ubuntu Networking :: Unable To Connect To Internet With Reliance Netconnect Data Card Using Network Manager
Jan 22, 2010
I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration..
I have installed ubuntu 32 bit version on my HCL netbook. I use reliance netconnect (Huwai EC 1260 or 168c). I have configured it and it works well. But the only problem is that I have to connect the netconnect device before booting. If I connect it when its ON, the networkmanager does not connect automatically. even on the right on the tray icon, enable mobile broadband option is not there.
i have satanic ubuntu 8. i was trying to connect to my reliance netconnect broadband+ via the following method. the process failed. its a usb broadband dongle thing.
Code: theunknowndoor@theunknowndoor:~$ SU bash: SU: command not found theunknowndoor@theunknowndoor:~$ su Password: su: Authentication failure
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration.
Ii am not able to install reliance netconnect broadband + on my fedora 13. the os is not detecting the usbmodem .it is treating it as a usb storage device only. there is a cross p[latform package supplied by the vendor. on using this. the package after installing gives an error message that "not able to mount usb". the same is running fine on windows xp where it got auto installed without any hiccups. do reply fast to help me install and access the internet through this usbmodem through fedora 13. the model no of the usb modem is ZTE - AC2736.
I have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.
I recently purchased a Micromax 3g GSM usb data card(MMX 352G). I am using it in windows 7 but now I want it to connect to the Opensuse 11.3 to use internet.
This modem is not detected by the command "wvdialconf"
the device is detected by command "lsusb" as 1c9e:9605
i recently installed Fedora 14 on my laptop and when im tryin to connect the reliance dongle its not getting detected even as a usb ... when i tried to install it on fed 13 the rpm package inside the usb stick gets installed but when i click on the shortcut for moden it shows "device not connected"
is there anyway that i can install my reliance netconnect lxu800 modem graphically(GUI). i am not well versed with command line interface. i just downloaded ubuntu desktop version and installed it alongside windows vista.
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
I followed (or at least tried to follow) tutorials on doing this. I installed network-manager-pptp and tried to configure network manager to connect to a VPN. In the settings when I select MPPE with 128-bit encryption, after I've selected it and applied it, I check the settings and it's invariably unchecked. I tried using KVpnc after getting frustrated with network manager, and I can't seem to get that working either. I've been trying to search for info on this, and I can't seem to find anything on why I can't select MPPE with 128-bit encryption. That seems like it might be why I'm unable to connect to the VPN?
I have just started using fedora 13 and I am not sure if i am in the right area but here goes...today I was online in my fedora 13 partition on my laptop and I had been online for quite a while then I shut down my machine to recharge the battery then a couple hours later I turned it back on and all of a sudden my network manager applet was missing and I could not connect to the internet, I opened firefox and tried to get to my homepage but it basically just told me that I wasnt connected..
I suspected at first for some strange reason that MAYBE it was my NIC so I booted up into my vista partition and low and behold the internet works fine, so the problem is on the linux side, I have tried every command nm-applet but it just keeps saying an instance of nm-applet is already running, I have no clue how to restore the network manager and get my internet back and the only other piece of information I have is that earlier today I did do a bunch of security updates but the internet was working fine all day even after several reboots through out the day.
The graphical option through the hardware drivers list 2 options, broadcom b43 wireless driver and the broadcom sta wireless driver None can be activated
The b43 displays: Sorry, installation of this driver failed.
Please have a look at the log file for details: /var/log/jockey.log
I have a 5720 Mini PCIE broadband modem card and though it works, it won't connect automatically in a Ubuntu system. Network Manager says it is enabled when I right click on the icon, but when I do a left click it says it is disabled. I have to right click and disable and then enable before my Verizon connection will work.
Just purchased a Dell Inspiron 580 MT tower pc with Windows Professional. However unable to connect to the network or the internet when I load a copy of Ubuntu Karmic on dual boot. Windows networking and internet working fine. Is this an ethernet adaptor hardware issue? Broadcom NetXtreme 10/100/1000 Gigabit Ethernet controller-PCI Express card Will try later connecting through a usb ethernet adaptor to see if this is really the problem.
I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
Heres the set up I have: one eeepc running ubuntu netbook. with a usb wifi dongle, this is connected to a parabolic antenna i made out of pizza boxes and tin foil. One fujitsu laptop running ubuntu 10.10. the eee connects to the internet via the dongle. then the laptop connects to the eee. I set this up by using network manager. I created a new wirless connection and called it "UbuntuAdhoc". The on-board card connected to this without issue and the laptop was able to connect to the new wireless broadcast by the eees on-board card.
This worked perfectly untill I rebooted the eee. Now the eee is unable to conect to the internet if the on-board caard is conected to "ubuntuadhoc". also the dongle now wants to conect to "ubuntuadhock" too.
the thing is that I cant use Network Manager to connect to Internet, because it simply do not connect. The connection, although, awailable throught yast when i choose "traditional method with ifup", so everything is just fine, but if i need to reconnect, i have to reboot. How do I setup a !working! connection through Network Manager, or maybe i do not do something properly.
i am beginner to this field of ubuntu(linux)...last week i have installed ubuntu 11.04...alongside windows xp...but i couldnt configure my net connection...i am using reliance LG LXU800 modem(cdma)intially it was working after using this commansudo modprobe usbserial version=0xeab product=0x9357that time my linux version is 2.6.38.7but now it gives fatal error and it isFATAL: Error inserting usbserial (/lib/modules/2.6.38-8-generic/kernel/drivers/usb/serial/usbserial.ko): Unknown symbol in module, or unknown parameter (see dmesg)
I am a user or consumer of Knoppix 5.1 and Knoppix 6.2, I see in 6.2 version a very usefully tool, an icon in task bar thats help my internet connection in auto, even if I use a mobile modem like Huawei E160, I only select a 'Auto Mobile Broadband (GSM) connection' and, voila, internet is active. Into version 5.1 don't exist this option. I need to find packages like network-manager.... and all relatives and install in 5.1 in correct order to success.
I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
I installed 11.2 on an older HP Laptop which was running XP without any issues. Durring the install, the update processe failed (presumably unble to connect to respository). I am usind a wired connection and the nic is connecting to my router and is recieving an address via DHCP. I am also able to ping the workstion from the router's Web interface. However I am unbale to connect to the internet.I have turned off the Suse firewall via Yast and checked the settings against another computer running ver 11.1 .Everything appears to be correct but no joy.
