Ubuntu Networking :: Unable To Access HDD Connected To Belkin Router / Enable This?

Jun 21, 2010

I have an external hard drive connected to my router. From Windows I can access it, but from Ubuntu I can see the hard drive, but when I try to access, I'm asked for a password. However my network does not have a password neither the hard drive.
What must I do?

View 9 Replies


ADVERTISEMENT

Ubuntu Networking :: Cant Access ExtHD Via Belkin Router With USB Port?

Jul 8, 2010

I have a newer Belkin N+ router that has a USB port for accessing an external hard drive.I can access the HD with no problem in Windows.I am new to Linux/Ubuntu and cant seem to connect to the HD. In "Network" I have a folder "Windows Share" and within that folder is where I see the HD "CBHD" (name of my drive). I cant click it because when I do, i get an error message along the lines of (cant remember exactly right now) "Failed to mound"I typically access the drive in Windows via : \192.168.2.1

View 1 Replies View Related

Ubuntu Networking :: DLink ADSL Router As Main Router And The Belkin N1 As Repeater?

Apr 13, 2010

Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.

View 9 Replies View Related

Ubuntu Networking :: (11.04) Ethernet Connected But Unable To Access The Internet

Jun 5, 2011

I am using ubuntu (11.04) here, when i connect Bsnl broadband link(wired connection). Internet is connect automatically But unable to instal, upgrad and access Internet pages ..

View 1 Replies View Related

Ubuntu Networking :: Connected To Network Via Live Cd (10.10) - Unable To Access Internet

Apr 26, 2011

can't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).

View 2 Replies View Related

Ubuntu Networking :: Can't Connect To Belkin N1 Router

Jun 23, 2010

I have a new belkin N1 router which I tested in somebody else's flat. It worked fine. When I got home I reset it by pushing a paperclip in the hole for 10+ seconds to erase this flat's internet connection settings (username and password and stuff). After this I plugged it the computer and tried to connect to it (wired connection) using 192.168.2.1 (this is correct for that router, it is not 192.168.0.1). But the browser says it is offline and cannot connect. The lights of the router cycle, the "modem router" light blinks continuously and the others briefly come on and go off again, every few seconds. I tried resetting it again, several times, leaving it off for a few hours, leaving it on for a few hours, etc.

View 2 Replies View Related

Ubuntu Networking :: Cannot Connect To Belkin Router

Jun 20, 2011

I have just installed 11.04 alongside windows vista. I have been trying to connect my router but it keeps saying disconnected from network. I have ran all of the troubleshooting tips in ubuntu its self and everthing seems in order. is there any settings i need to change on my router or in ubuntu's edit connections programe? I managed to connect to the router once to upgrade from 10.10 to the 11.04 but even before upgrading to 11.04 i had problems connecting to the router.

View 6 Replies View Related

Networking :: Can't Ping Belkin F5D7234-4 Router

Jun 30, 2011

I have a Belkin wireless router model F5D7234-4 version 5. I switched to DHCP long enough to access the router via Firefox browser and look at all the settings. I turned off all encryption and other security related functions in order to just get it going. The IP of the router is 192.168.2.1 which is the default for this router. It is set to channel 6. I can not ping the router from either of two machines using regular ethernet or wireless. I have very limited experience with routers and am in need of help so I can use this for wireless connection to my living room box to my laptop in the bedroom about 50 feet away.

I tried changing the gateway from the living room box IP number to the router IP number with no success. I don't have anything connected to the internet port on the router. The living room box and the laptop are connected to the ethernet ports on the router. Ethernet works fine. Wireless does not. I compiled and installed the drivers for my wireless card on the laptop, a Realtek 8176 which uses the kernel modules rtl8192ce, rtlwifi and mac80211. ifup wlan0 brings up the wlan interface with these modules loaded. Right now I just want to be able to ping the router using regular ethernet. That would tickle me pink at this point. I downloaded the manual but I just can't seem to make headway.

View 2 Replies View Related

Ubuntu Networking :: Belkin Surf N300 Wireless Router?

May 10, 2011

You'll need to reply like I'm an absolute idiot. I cannot get the stupid thing to work. WINE won't install, and I'm really confused on how to make it work. If anyone could please give me a step-by-step, that would be great.

View 1 Replies View Related

Ubuntu Networking :: Belkin F5Z0142uk Enhanced Wireless ADSL Router Kit

May 13, 2010

Does anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]

View 2 Replies View Related

Ubuntu Networking :: Time Outs Belkin Wireless Router F5D7234-4

Dec 28, 2010

I recently purchased a TPlink 5 port switch, which for some reason didnt work with windows, only my ubuntu computer, I found a cheap wireless belkin router which also has 4 wired ports. It now works well except that it is slow searching for new servers eg, going to facebook creates a long wait and can even time out but once on the website everything works fast, The connection is 2.89 Mbps which is good for this area and ping is 45ms. What could I do to fix this problem. This affect my ubuntu computer and the windows xp pc as well

View 2 Replies View Related

OpenSUSE Wireless :: Access Files From When Connected To The Router With The Shareport Utility?

Apr 18, 2010

Is there a way to make the (router's) USB port to work in OpenSUSE? I have a external HD were I would access files from when connected to the router with the shareport utility but it only works on windows. I was wondering if it could work in wine? And how could I do it?

And how can I make a network? I have never made a shared connection between computers. I don't know the correct term but I would like to share files with my brother and sister which I just converted from Ubuntu

View 3 Replies View Related

General :: Find Out What Computers Are Connected To An Access Point/router Using Terminal?

Feb 10, 2011

I would like to determine what computers are currently connected to my access point/router via the command line in Linux.

View 2 Replies View Related

Debian Configuration :: Unable To Get Intel Pro/wireless 3945abg Connected To Router

Mar 2, 2010

I am unable to get my intel pro/wireless 3945abg connected to my router. The firmware has been installed and at first was even able to connect, but now the access point doesn't even show up in network manager. I am currently able to connect using a USB wireless adapter, but for certain reasons, would prefer to use the former. I've looked over this page with no results.

View 7 Replies View Related

Ubuntu Networking :: Connected To Router But No Web?

Jun 4, 2010

i'm connected to my 2wire 2701hg-b, but have no internet. when i plug in directly there's no prob, but wireless is a no-go.

View 1 Replies View Related

Ubuntu Networking :: Connected To Router But No Internet?

Feb 21, 2010

just installed Ubuntu Netbook remix on my acer aspire one, and come across a problem Ive never faced before. Im able to Connect to my router (and access it through the internal ip address) but as soon as i try access anything outside of my network there is nothing!

This i found odd as first i thought it might have just been my Routers problem, but seeing as all my other computers were connected to it with no problems (wired and wireless) I quickly traced the problem back to the laptop.

After this i decided to see if after a simple update would fix the problem. so i connected it up through the Ethernet port once again it connects to the router but no internet! I have tried everything in my knowledge, but with no success!

View 9 Replies View Related

Ubuntu Networking :: Connected To Router But Not Internet?

Sep 26, 2010

I am connected to my wireless network but can't connect to the internet. I have searched the ubuntu forums for solutions but none seem to work for me. I can post terminal outputs if required (I know that much).

View 8 Replies View Related

Ubuntu Networking :: Connected To Router But No Internet

Sep 1, 2011

I'm running a Natty machine wired to a TP-Link router (TL-WR841N) with additional Ubuntu and Windows machine on WiFi. Recently I've had some problems with connectivity on the Natty machine. Connectivity is fine as far as the router, but not beyond it. This applies to all browsers, Software Center, Aptitude and anything else you can think of. Now, normally at this point I would call my ISP, but the thing is, all other machines have connectivity. I've checked the cables twice and anyway, if it were them, I wouldn't be able to ping the router. Router has ping functionality to outside and it's working, have tried ubuntu.com and google.com. Also, connectivity between the wired and wireless machines is fine, pings are flying across the network beautifully.

View 5 Replies View Related

Ubuntu Networking :: Router Can Ping - Connected Machines Can't

Feb 16, 2011

I'm running into a curious networking hiccup with my router setup. I have a D-Link DIR-628 wireless router connected to our modem, and a wire running from that to a Linksys WRT-54G (v1.1) in our basement. This setup worked great for a few days, but then suddenly the Linksys stopped routing us to the internet. I can connect to the router page on the Linksys and using the diagnostic tools I can ping the web from there, but none of the computers connected to it can. Everything is fine when connected to the D-Link.

After fiddling around with just about every setting on the Linksys I finally gave up and tried resetting it to factory defaults--and it worked! Everyone could access the internet again. But then, every day or two it locks up again and I have to reset factory defaults again.

View 2 Replies View Related

Ubuntu Networking :: Configure Scanner Connected On A Router?

Mar 24, 2011

I have a router Asus RT-n16 where i've connected my EPSON DX5000. I've configured the printer function, adding the printer as AppSocket, adding router IP and port 9100 (socket://Router_IP:9100), but now i can't get the scanner function.

I've installed packages from here[URL].do (iscan) and adding on /etc/sane.d/epkowa.conf the line

Code:
net 192.168.1.1 #my router ip
but it's not working. When i run scanimage -L i get this message:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). The scanner option worked fine when my printer is directly connected at my computer.

View 2 Replies View Related

Server :: Access Ubuntu File Server If It's Connected To A Router?

Feb 13, 2011

I want to access files on my ubuntu server wireless. Is there a way I can do that? I'm sorry if this is a stupid question, but I'm kind of new at this whole server thing.

View 5 Replies View Related

Networking :: How To Scan For Other Devices Connected To That Router

Apr 7, 2011

To use my home broadband, I am connected to a wireless router. How can I scan for other devices connected to that router? I am using Ubuntu 10.10.Is there both a GUI and CLI method?The IP of my router is URL... Please rename this thread title from 'How can I scan for other devices connected to that router?' to 'How can I scan for other devices connected to my router?

View 4 Replies View Related

Ubuntu Networking :: Wireless Router Connected - Can Ping But No Internet

Mar 1, 2011

This morning my Ubuntu 10.10 Meerkat desktop suddenly lost internet connection, but stayed connected to my netgear router. After the usual "tried turning it off and on again" methods didn't work, I booted into my Win Vista partition to find that connected no problem. I have another Ubuntu netbook and a Windows 7 laptop in the house as well as an Android. These all connect fine. It appears to be just the desktop Ubuntu.

I can ping my router 192.168.0.1 and log into it's UI via browser. I can also ssh to the box. My router does not do any filtering or blocking. I've tried disabling the firewall and changing the nameservers in /etc/network/interfaces and dhclient.conf as well as the network manager. The network card is a Belkin 54g but I can't remember the exact model no. it was bought years ago.

Code:
$ping www.google.com
PING www.l.google.com (74.125.230.115) 56(84) bytes of data.
^C
--- www.l.google.com ping statistics ---
30 packets transmitted, 0 received, 100% packet loss, time 29004ms

Code:
$traceroute 74.125.45.100
traceroute to 74.125.45.100 (74.125.45.100), 30 hops max, 60 byte packets
1 * * *
...continues to...
30 * * *

When I do a restart of the networking service it spits out the error:
Code:
Ignoring unknown interface wlan0=wlan0
However, as I said the wireless itself works.
/etc/network/interfaces:

Code:
auto lo
iface lo inet loopback
iwconfig:

Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"haters gonna hate" .....

View 1 Replies View Related

Ubuntu Networking :: Connected To Wireless Router, But Can't Connect To Internet?

Aug 2, 2011

I think something weird is going on. On a fresh installation of 11.04, I seem to be connected to my router just fine, but I can't reach the internet or anywhere else on my network. Anybody see my problem from what I've posted? The computer is only connected via wireless (so I don't know why eth0 would be connected as well). I can't think of what I'm missing...My system seems to be connected to my router on two interfaces. "ip addr" gives:

Code:
1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

[code]....

View 9 Replies View Related

CentOS 5 Networking :: Belkin As Wireless Access Point With Existing Setup?

Jul 2, 2011

I have a Centos 5.6 Linux Server configured as Router with NAT for my LAN. There are currently 2 NIC's on my server. One is connected to WAN , a PPOE connection (eth0) and eth1 is connected to a switch which supports my LAN. I have enabled NAT and configured iptables on my server and I am able to access internet from LAN and everything is working fine.I have a Belkin F5D8233-4v3 Wireless router and I need to configure wireless on my network so that I can access internet from my Laptop. The issue is that I have only 2 NIC's on my server, one Gigabit NIC integrated with my motherboard and another NIC which I am currently using for WAN access and LAN. I need to setup the Belkin as an wireless Access Point.

Can I connect my Belkin to my switch and set it up as a Wireless Access Point?? I have read about setup using 3 Nic's.Any ideas on how to configure my Belkin as Wireless Access Point with my existing setup? Is Belkin F5D8233-4v3 supported on Linux.

View 1 Replies View Related

Ubuntu Networking :: Automatic Backup Using USB-HD Connected To Router (Siemens SE551)

Aug 6, 2010

Currently, I would like to setup an automatic backup system, where the data on my computer is copied to an external harddisk which is connected to the router (Siemens SE551). This device theoretically allows setting up a file server, but unfortunately I can't access the share from Linux. I have not yet tried to access this share from Windows.

The rough plan is to use rsync and ssh, issued by a cronjob on both, my Ubuntu- and on my WinXP-notebook. But before considering this, I have to get my system connected with this drive.

BTW: I am using Ubuntu 10.4.

According to the SE551 manual [URL], NAS is not provided.

I followed this manual and set security OFF. According to the router's web interface, the device was recognized correctly.

I installed samba:

Code:
gedit /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the

[Code]....

View 5 Replies View Related

Ubuntu Networking :: Wireless Shows Connected, But No Internet/Can't Ping Router?

Sep 14, 2010

So I installed 10.4 on a new Toshiba Satellite L645DWhen I connect to my wireless at home, the Network Manager shows that I am connected but I can't reach any websites via ping or firefox. I also can't ping my router. I also don't have wired access working at all.iwconfig shows connected to correct ESSIDI can ping localhostcan't ping google:

Code:
ping: unknown host www.google.com
can't ping my router (192.168.2.1):

[code]....

View 8 Replies View Related

Ubuntu Networking :: Getting My Wireless Printer To Work - Unknown Device Connected To Router

Apr 27, 2010

I had previously been having loads of problems getting my wireless printer to work with Linux [http://ubuntuforums.org/showthread.php?t=1453697]. Everything is working fine now. However, something that confused me is that whenever I tried to ping the printer _before_ I got it working, it would fail with a _different_ IP address. That is, the command 'ping x.y.z.3' would fail with a message saying it was unable to contact 'x.y.z.2'

Now I am looking at my router - for something unrelated - and I've noticed that rogue IP address shows up in the list of connected devices. It has a MAC address but for the device name it lists "<unknown>". Should I be concerned about this? how to figure out what this device is?

View 6 Replies View Related

Ubuntu Networking :: Insert Another Wired Network Card Into The Router-connected Computer

Sep 25, 2010

Would it be possible to insert another wired network card into the router-connected computer, share the internet connection and be able to transfer files between the two?

View 1 Replies View Related

Ubuntu :: Crappy Belkin N150 Router?

Jun 18, 2011

I joined this forum so I can say my experience with the crappy belkin N150 router. It appears you need to run the setup cd under windows to make the router 'see' the modem. Under linux as someone pointed out you can easily enter the router setup from a browser ( enter 192.168.2.1 ) and connect to the router only (wired or wireless connection) but not the internet. Does anyone have any idea what the windows setup is doing to connect the router to the modem and how to do it under linux in the browser?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved