Ubuntu Networking :: TP-Link USB Wireless Adapter Freeze When Downloading?
Jun 8, 2010
I've a damn TP-LINK WG422G UBS Adapter that i love i installed latest compat-wireless driver package and used latest ar9271 firmware after that it was worked properly. There is no problem when surfing the net, the problem is occurring usually download something via torrent sometimes form websites. I'm starting to download and then usb adapter suddenly freeze. If i remove and plug in the usb adapter it is working again.
I have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,
i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.
Have tried methods from every thread I could find for past 10 hrs. Have tried installing rt3070sta etc.Monitored message log; appears that the driver isn't recognized, though the USB port sees that something is plugged in (when I plug in the adapter, and unplug it).All of the threads miss something; I can't get a wireless port listed under ifconfig no matter what I try. Seems that every method leaves out something (I guess because everyone's box is different in some way). Network manager doesn't help much. Downloaded Wicd, which does even less.I guess I could try ndiswrapper, but I'm scared away by the hundreds of pages I see on going that route; I'm almost certain it wouldn't work (1000 possible points of failure).Does anyone have a strategy to recommend?AM64 box, newly installed Edubuntu 10.04, ran update manager.
i just installed Ubuntu 11.04 64bit on my desktop. i have a TP Link TL-WN321G (Ver 4.0) wireless usb adapter to connect to my wireless network (i used to use it with Windows XP).As expected (i'd read up a bit before installing Ubuntu), the adapter was autodetected - i could see my wireless network listed in the networks list dropdown, and lsusb showed it too.lsusb identifies "Bus 002 Device 002: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter"But i cannot connect to the network. When i select my network, it keeps trying to connect, but never succeeds in connecting.
i tried going through the forums for possible solutions, but most of them deal with how to get it working when the adapter is not detected, or when networks are not shown. Or they are for older Ubuntu versions.i use the same wireless network on my laptop (Ubuntu 9.04), and it has a WPA & WPA2 Personal security, with a password, which i've configured in the desktop as well.
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
I have a old mac G4 and I just recently installed ubuntu 10.10 on it. It doesn't recognize my wireless adapter at all so I get no wireless on the computer. I've never used any linux distribution in my life so I don't have any idea how to install drivers for it.
I have just installed Ubuntu 9.10 on an Acer TravelMate 290E. I've got internet connection through the Ehternet Cable, but when I plug in the D-Link WLAN USB device, although the system recognises it, it is disconnected. How can I connect the WLAN USB device adn get it to work?
It worked with 10.10, but in 11.04 only partially. It would show up in Bluetooth Manager, and I was able to pair with my phone. But after that it always failed to connect. Tried lots of things before I spent $10 on another nameless Chinese one and that worked fine immediately.
how to install D-link dwm-152 (3G/HSDPA) usb adapter on Lucid Lynx?
i've run lsusb and the result are:
Bus 005 Device 002: ID 0a5c:2162 Broadcom Corp. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I'm having some issues getting connected with a TP-Link TL-Wn727N wireless USB adapter. I have no way to connect hard wired with the computer, but I have another working notebook to possibly download files. However, the second notebook is a Mac, so most of the posts I've found are not filling in all of the answers. Also forgot to note, I am using Ubuntu 10.10. I followed along with this and managed to get the card to find the wireless connection. However, the connection would never connect. After entering the security password the wireless icon would do it's thing and then pop up asking to ok the password again. I double, triple checked the password and it is correct. I found elsewhere that I should probably install wicd. This is where I've run into problems with finding the way to get files that I can download on the Mac and then installed on the Ubuntu computer. I managed to find this forum thread and downloaded this file I transferred the file from the Mac to the Ubuntu with a flash drive and tried to install. First the install said that Network Manager needed to be removed, so I removed it. Next it says "Dependency is not satisfiable: python-urwid." I'm not sure how to go about getting this dependency as it is not showing up in the package manager.
I have tried to install tp link tf3200 network adapter without success . the os is 8.04 hardy loading drivers is new to me. the driver is sundance (i think) and the output from the make command is shown below.
pag@paghomelinux:~$ cd /media/cdrom0/TF-3200/LinuxDriver pag@paghomelinux:/media/cdrom0/TF-3200/LinuxDriver$ sudo make all sudo: unable to resolve host paghomelinux
1) it cannot see any networks around 2) i cannot setup it in master mode to use my PC as a router
As far as i can see, the device is recognized and the correct driver (rt73usb) is loaded. I was able to connect to a laptop somehow (the laptop could see other networks and the adapter's PC-to-PC network). I'd like to make it work as a router, i.e. share my internet connection (eth0) via wlan0. Here is what i have:
Code: Ubuntu 10.04 Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux TP-Link TL-WN321G wifi usb adapter as seen as Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter $ iwconfig wlan0 wlan0 IEEE 802.11bg ESSID:off/any [Code]....
I had my wired internet working ok, but now that's not working for god knows what reason (yes I'm new). I've got my D-Link DWL-G120 usb wireless adapter pluged in but it's not "working". In the Hardare section it shows all the information for it but it shows it as a unclassified device. At this point I'm thinking of buying a bridge and just reinstalling the OS (plus I want to get a bigger Hard drive as I've got it on a 7 GB drive right now).
my long awaited WUA-1340 D-Link wifi adapter has arrived, and...unfortunately won't work it didn't work "out of the box", so I tried the following (found on the aircrack website)Here's what I did....1. Edit /etc/modprobe.d/blacklist and add blacklist rt73usb as a new line.2. RebootThen,
Code: wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt73-k2wrlz-3.0.3.tar.bz2 tar -xjf rt73-k2wrlz-3.0.3.tar.bz2
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly. 2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page. 3) From terminal I typed "cd Desktop" to change the directory to the desktop. 4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb" 5) This installed Windows Wireless Drivers gui successfully and I can access it. 6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed. 7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder. 9) Upon mousing over the network Icon naturally my hardware is still not present. 10) From what I gather after the system finds the hardware I am to write into the terminal
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
I'm experiencing complete system freezes when dowloading torrents with more than 800kb/sec (I think this is the limit, I've capped it at 750, and it seems to be running ok now). I had this same problem in Ubuntu aswell. But not in Win 7. The problem also appeared in ubuntu when streaming video through VLC with more than 800kbps.
As my connection gives me quite alot higher download speeds this kind of annoys me, and me being quite new to this whole Linux thing, don't really know what to do. I had a dialogue with someone at Ubuntuforums regarding this, but we pretty much got nowhere.
Every time I download torrents in Ubuntu 11.04 on my desktop, using Transmission or Deluge clients, the wireless transfer speed abruptly drops off, becomes very choppy, and in general doesn't remain stable. It's not only the torrent download that slows down, but it's everything including web surfing, even though I'm not maxing out my connection speed. It's not that I'm getting disconnected from my router, it's just that the wireless transfer speed drops off, becomes intermittent, and never gets back up to full speed.
At first I thought that my ISP was throttling my connection, but this issue doesn't happen with a direct cable connection to my router, nor did it happen when I was running Ubuntu 10.04 before. It also doesn't happen when I'm downloading the exact same torrents over wireless using my netbook running Ubuntu Netbook Remix. This issue ONLY seems to happen when using a bittorrent client while on wireless on Ubuntu 11.04 on my desktop. I can max out my internet connection speed by streaming videos, downloading from FTP, etc. using wireless just fine, and the transfer speed remains stable. This also seems to happen with a couple of different wireless USB adapters (rt73usb or rtl8187 drivers).
I'm trying to download phpmyadmin from sourceforge => http://sourceforge.net/projects/phpm...r.bz2/download .I'm using the wget command followed by direct link from the page. All I get is some irrelevant file that has nothing common with phpMyAdmin-3.3.9-all-languages.tar.bz2.The direct link is for clients with web browsers that triger automatic download to user desktop, but I need to download the package to a server. What is the wget option to get the file from this kind of links?
I have tried a couple of wireless adapters (USB dongles) but none of them work all that good on Ubuntu. I keep loosing connexion when on Ubuntu while on Windows (dual boot) there never seems to be any problems, so signal strength is probably not the issue. I bet it's a drivers problem so what I want to know is which adapters work really really good/great/fantastic on Ubuntu? The first option, wext, was chosen when I installed Wicd (running side by side with GNOME Network manager).