Ubuntu Networking :: T22 With Edimax PCMCIA Disconnects On Switch To Battery?

Jun 18, 2011

I have just upgraded to 11.04 from an earlier version and most things are working better, if a little slower. Had to remove pulse audio to get any sound. Wifi with Edimax 54G Pcmcia card used to work fully, but now only works on mains, not on battery.Suspected power management but iwconfig shows it is off.Dmesg revealed that the driver had crashed in rt61pci.

Code:
[ 452.171536] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 452.171559] IP: [<e0a441df>] rt61pci_config+0x1f/0x180 [rt61pci]

[code]....

View 3 Replies


ADVERTISEMENT

Ubuntu Networking :: Rtl8188ce Disconnects Using Battery Power

Mar 31, 2011

I've got a Toshiba Satellite with the Realtek rtl8188ce network card. I've successfully downloaded, compiled and installed the driver and it works great except when running the machine on battery power when it constantly disconnects, like every minute or two.

View 7 Replies View Related

Ubuntu :: Panel Gets Broken Many Times - Switch Button Vanishes - Battery Indicator Shows Up Twice

Jul 6, 2010

The Panel gets broken many times. Sometimes the Switch Button vanishes, battery indicator shows up twice.

View 1 Replies View Related

Ubuntu Networking :: PPPoE Through Router EDIMAX In U 9.10?

Feb 21, 2010

I have 2 PC's : a desktop and an notebook(IBM).On my desktop i have Windows 7 and Ubuntu 9.10,and on my notebook(IBM) is Windows XP SP3. Both of the PC's are conected to internet over an PPPoE conection in Windows thorugh my router(EDIMAX).

My desktop has the following :
IP adress : 192.168.2.100
Subnet mask : 255.255.255.0
Default gateway : 192.168.2.1
Preferred DNS server : 192.168.2.1

[Code]...

When i boot to Ubuntu 9.10 i dont have internet...but if i restart the PC and enter in Windows 7 there is internet,and is the same connection,the same adresess. How can i make the connection in Ubuntu 9.10 with the same adress,i mean like is in Windows 7?

View 2 Replies View Related

Ubuntu Networking :: Edimax 7811 No Driver?

Oct 8, 2010

I'm going round in circles with this as I'm just not very good at using the command line in Ubuntu. I've bought an Edimax EW-7811Un nano USB wifi adapter, and I'm really cheesed off at the moment because I can't get it to work on my laptop. I've got Ubuntu 10.04 on it. I really want this tiny dongle to work with my computer. Ubuntu is much fats than Windows, and I use it all the time, but my current wifi donlge is an old big monstrosity!

View 9 Replies View Related

Ubuntu Networking :: Edimax Router Keeps Crashing?

Dec 27, 2010

The issue is that after a while the lan side doesn't work any more (I don't know whether the wan side still works, but I assume it doesn't)

First we had BR6214K for which the transformator turned out to be broken (at least after a few years it gave 7 instead of 12 volt), only have it's replacement die shortly after. But the issue since the beginning was the network disconnecting every two to three days. Restarting the router solved the problem almost every time.

Now we have the same issue with a brand new BR6226n. This time the disconnection occurs almost every day. Restarting the router has so far worked every time.

Is this more likely to be a router or a computer issue (maybe a broken network card in one of the computers)?

View 1 Replies View Related

Ubuntu Networking :: Edimax 7717un - Connects But No Web Browsing

Mar 2, 2010

Got an Edimax 7717un USB dongle for my Acer aspire 6930 (built-in WiFi is broken). It finds access point OK, but fails to setup with DHCP. If I put in manual IP config, I can ping OK, but I cannot browse web (or even my router's setup page). I get same behaviour on a home brew desktop.

With manual IP config, ping to my router works fine (and very fast, as does ping to 2 or 3 internet web sites. I can traceroute to internet web sites OK as well. With web browsing, if I wait a few minutes some bits of the page may arrive. With connection set to DHCP, Wicd shows WiFi connecting OK, but DHCP setup times out.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Edimax 7727in Wireless PCI Card In 10.10

Oct 22, 2010

I have Maverick Meerkat running perfectly on my laptop and have loaded as dual boot onto my old XP pc as well, I'm quite a newbie and working my way through Ubuntu for Non Geeks.

Problem - apparently this PCI card - Edimax wireless N PCI 7727in card is supposed to work out of the box, it came with the Ralink drivers for Ubuntu RT2860.

the network manager finds the homehub and tries to connect but just continually tries and never actually does it, the card works fine with XP so i know it's not faulty.

if it was a driver fault would the card be working at all? would it try to find the network manager?

I bought this card as previously i was using a Dlink DWA-140 and gave up trying to make it work, this card is advertised as Linux compatible in the Ubuntu forums list and on the card.

View 3 Replies View Related

Ubuntu Networking :: Edimax EW-7711ln Recognized But Cannot Connect?

Jan 25, 2011

I have two PCI network cards: Wired - Successfully connects to the internet and removed from the outputs describes below. Wireless - A new and works well in WinXP - Edimax EW-7711ln: problematic - can't connect. Manufacture says it's supported in Linux. Although in it's site it doesn't have any linux driver to download. The XP driver contain 2 .cab files that cannot be accessed using unshield/cabextract so I guess "ndiswrapper" is not an option. Other Linux disrtos also didn't recognize the wireless as well. Below I added as much information as I could get.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Cannot Load Edimax Wireless Driver

Aug 3, 2011

I have just bought an Edimax EW-7711UTn wireless adaptor with CD. I have the Linux folder on the CD. Folder name 2009_0525_RT3070_Linux_STA_v2.1.1.0. How do I install from this folder

View 5 Replies View Related

Ubuntu Networking :: Edimax WiFi Card Not Working With Karmic

Jan 7, 2010

Finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. I seem to be experiencing a problem many have, being that my wifi card (edimax) which worked on my previous distro is now not working at all. I've done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.

My problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers nothing appears at all. I have no drivers present, where most people are talking of 3. i have not found anyone else with this problem. My problem is compounded in addition by not being about to use a wire connection at all.

View 3 Replies View Related

Ubuntu Networking :: 10.04lts And Edimax Ewg7318 Usb Dongle Won't Work

Jun 17, 2010

I have a elonex web book with UB 10.04lts installed. Now when i installed aircrack package and tried to scan using airodump-ng mon0 (card in monitor mode) it worked fine and picked up my test APs but wouldn't inject. So i downloaded the drive below and now i cant even use airodump it just sits there?

rt73-k2wrlz - 3.0.3-2~ppa0~karmic

[URL]

View 2 Replies View Related

Ubuntu Networking :: 10.10 64bit Driver For Edimax EW-7711 In PCI Card

Mar 15, 2011

I can't find a working driver for this card. Notice that I use 64bit ubuntu.

1. desktop

2. lspci -nn

03:07.0 Network controller [0280]: RaLink Device [1814:3060]

3. iwconfig wlan0
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm

[code]....

View 1 Replies View Related

Ubuntu Networking :: Device Driver Installation For Wifi Edimax?

May 27, 2011

i am trying to install device driver for my usb wireless adapter "Edimax" . i have figured it out that it recognized by device but when i submit command lshw it doesnt show configuration driver for wireless usb. i have drivers for it in the vendor cd as "driver for linux" but i dont know how to install it

View 1 Replies View Related

Ubuntu Networking :: Repeating Disconnect With Edimax Ew-7318 - Every Few Minutes Or Seconds ?

Aug 6, 2010

I have a usb wireless card called "edimax ew-7318" i used it for a year and it was great- worked out of the box. recently i've been having repeating disconnect problems every few minutes or seconds it will disconnect and then reconnect again

In system log i get:

Code:

It seams like a physical hardware problem but i cant find any physical fault on the card itself.

View 4 Replies View Related

Fedora Networking :: Edimax RT73 USB Recognized But Not Working?

Feb 17, 2009

I have just installed Fedora 10 on a Dell Inspiron 530. I was delighted to see on the very first boot into the system that my Edimax RT73 USB stick was recognised by the system as it was offering a selection of wireless networks to connect to. But oddly, my own network wasn't listed there. I created a new network and entered the network id manually. Once it was in the list, I checked the radio button and saw a message that I am connected to my network. But after a few seconds the network icon disappeared.

I rebooted the system and again went through the same process with the icon disappearing.

I have an Edimax wireless access point with DHCP enabled. The security is WPA2 Personal with AES.

Vista is also dual booting on the same machine and working fine.

View 6 Replies View Related

Ubuntu Networking :: Difference Between PCMCIA And USB Adapters?

Jan 9, 2010

I am planning to buy a wireless device that supports both monitor mode and packet injection options for my project work..I came across this site while browsing

http://airodump.net/wifi-hardware-monitor-applications/

Is there any advantage of using USB Wifi Adapters over PCMCIA cards??your suggestion/experience in choosing a device in that link or recommend any other device?

View 1 Replies View Related

Ubuntu Networking :: Consulting Regarding Edimax Wifi-usb Supported Modes At Jaunty (master And Ad-hoc)?

Jan 25, 2010

After purchasing few wifi-usb-dongles for my jaunty and lost many hours, i had no success in bringing them to operate as master or ad-hoc.The devices were Belkin, Level1, and a TP-Link 620 Though the Belkin could work as ad-hoc, but very often disconnects due to buffers issue (though I couldn't build the zd1211b driver for jaunty and it seems that no one can really help with that).

Now I would like to consult with you ahead regarding new potential devices, whether you know it operates as master mode or ad-hoc mode under jaunty (9.04)?

My concerns are regarding:
1. Edimax EW-7318UG
2. Edimax EW-7318USg
3. Edimax EW-7711UMN
4. Edimax EW-7711UTN
5. Edimax EW-7311USN
6. Edimax EW-7717 nMax
7. Edimax EW-7718 nMax
[URL]..

View 1 Replies View Related

Ubuntu Networking :: Wireless Pcmcia Card Will Not Power On?

Sep 27, 2010

I am using a Linksys wpc600n wireless card that works fine in windows xp, but will not even power on in ubuntu. I tried to use the pccardctl command to get the card to turn on but it still does not turn on.

View 1 Replies View Related

Ubuntu Networking :: PCMCIA Card Not Working In Lucid?

Dec 6, 2010

Here's the dealy-o. Card is a Netgear, computer says it's a BCM43XG REV01.Card is functional but not working on my fresh Lucid install.Here's what it says:

p { margin-bottom: 0.08in; } derek@derek-laptop:~$ lspcmcia -v
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:0a.0)
Configuration:state: onready: unknown

[code]...

View 8 Replies View Related

Ubuntu Networking :: 11.04 PCMCIA Linksys WPC100 Not Working?

Jun 24, 2011

I have a WPC100 linksys network card. I have ubuntu 11.04 installed. My laptop is a D610.

I have done a LOT of google searching and not seeing any solutions on how to successfully get it working.

I have tried the ndiswrapper and it does install the driver but then says "no hardware present".

I have also blacklisted the broadcom drivers.

I am coming to the conclusion that it will never be possible to get the WPC100 to work. (note I also have been to the support page and do not see it there. )

View 9 Replies View Related

Networking :: Ubuntu 8.10 With Broadcom Chipset Pcmcia Card

Dec 18, 2010

some time ago I installed 8.10 on my x20 thinkpad. I at the time was trying to get it going on a Netgear WG511 v2 card. I was eventually successful in getting it going with ndiswrapper and all has been happy until...

I decided to give my laptop to an elderly friend for his first computer. He is living in a location where (for a variety of reasons) he is sharing a network connection to the internet with a few people. The protocol there WPA2 TKIP (IIRC) and no matter what the bloody thing won't connect. Here at home I run a different setup so its not a big deal

So, I thought I'd try another card to get it going there. I chose a "Aironet" card (badged a Dell 4800 LT) and tried to install this on 8.10

I expected it would install out of the box, but did not "seem to".

I followed the steps on this page, but still it won't connect to my WiFi at home (which I am using to connect to with this x31 thinkpad)

I am using Network Management Applet 0.70 and this works fine with the Netgear card, even showing all the local networks it finds.

When I plug in the Dell card it blinks the activity light and the status light in seemingly meaningful ways, but nothing seems to connect and I find nothing listed in the Network Applet.

I suspect that the OS is discovering the card as when doing an iwconfig I find two entries that would be that card:

eth1 and wifi0

iwlist scan returns:

which makes me think two interfaces are taking the same hardware...

iwconfig returns idential results for eth1 and wifi0

View 2 Replies View Related

Ubuntu Networking :: Edimax EW-7128g Wireless PCI Not Working With Ralink RT2561/RT61 Chipset

Sep 5, 2010

Just installed Ubuntu Studio 10.04 and everything seems to be working nicely except I have no networking.

The card does not appear in the Network Settings GUI. The only 3 tabs I have are General, DNS, and Hosts.

A screen grab is attached.

I'm a long time Windows user trying out some of the best Linux creative apps I can find. So, Ubuntu Studio was a no brainer. I checked the manufacturer's site for linux drivers and they are available, but I don't know how current. (Edimax site, not RaLink's site.) I opened the file and it looks like it needs to be compiled and installed to work. Something I know almost nothing about. The card is listed as supported in this forum for Ubuntu 9x but I can't find information about it for 10.04

PS. I have no networking on the system but I can transfer files via USB flash drives if needed.

Some System info:

Code:

1 ) Machine Brand and Model (PC/Laptop): Dell Precision 650

2 ) Wireless Brand, Model and Wireless Chipset: 03:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI

3 ) check interface: robert@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1

[Code].....

View 1 Replies View Related

Networking :: Assigning Eth0 To PCMCIA Nic?

Apr 26, 2010

Just completed installing Xubuntu 9.04 to my old Dell Latitude CPi and it seems to be working quite well. However I need to assign interface eth0 to my pcmcia network card (as opposed to eth1 or eth2). I have two cards to try out. One of them comes up as eth1 and the other as eth2. There is no eth0 listed when I run ifconfig -a. There is no built-in network cards on the laptop, so I don't know why it won't assign eth0 to either of the cards.

how to assign eth0 to either of the two PCMCIA network cards.

View 4 Replies View Related

Fedora Networking :: Edimax Ew-7711utn Wireless Cards Doesn't Work

Nov 15, 2009

I've currently got the beta of fedora 12 installed, hope to upgrade that once the final release comes out. I'm having so many problems getting wireless to work. I've got a edimax ew-7711utn wireless adaptor. It doesn't work. Really what I want is to take it back and get a wireless card that will work.

View 6 Replies View Related

Fedora Networking :: Wireless Card Edimax EW-7711In Doesn't Work

Sep 7, 2011

I installed Fedora 15 64 bits version on my desktop, and I'm having hardtime activating my wireless card.

I tried following the instructions from this thread without success [url]

Here are the logs of some of the commands I used

lspci output

Code:

iwcconfig

Code:

Code:

View 1 Replies View Related

CentOS 5 Networking :: Install Ralink RT61 Driver (Edimax EW-7128g)

Mar 23, 2009

I have just purchased an Edimax EW-7128g with Ralink RT61 chip and physically installed it in a system running CentOS 5.2. Trying to follow the installation instructions, I get the following:

[root@webtest Module]# make all
make -C /lib/modules/2.6.18-92.el5/build SUBDIRS=/root/drivers/2007_1210_RT61_Linux_STA_v1.1.2.0/Module modules
make: *** /lib/modules/2.6.18-92.el5/build: No such file or directory. Stop.
make: *** [all] Error 2

The problem is that although /lib/modules/2.6.18-92.el5/build exists, it appears to be a link:

[root@webtest Module]# ls -l /lib/modules/2.6.18-92.el5/build
lrwxrwxrwx 1 root root 43 Mar 23 15:34 /lib/modules/2.6.18-92.el5/build -> ../../../usr/src/kernels/2.6.18-92.el5-i686

View 7 Replies View Related

Ubuntu Networking :: Won't Recognize New Pcmcia Wifi Card / Resolve This?

Jan 1, 2010

I got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...

View 1 Replies View Related

Ubuntu Networking :: Ralink Wireless G Pcmcia Wifi Card

Mar 11, 2010

I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU)‏.
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.

I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.

Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?

View 1 Replies View Related

Ubuntu Networking :: Ralink Wireless G Pcmcia Wifi Card?

Mar 11, 2010

Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved