Ubuntu Networking :: PPPoE Through Router EDIMAX In U 9.10?

Feb 21, 2010

I have 2 PC's : a desktop and an notebook(IBM).On my desktop i have Windows 7 and Ubuntu 9.10,and on my notebook(IBM) is Windows XP SP3. Both of the PC's are conected to internet over an PPPoE conection in Windows thorugh my router(EDIMAX).

My desktop has the following :
IP adress : 192.168.2.100
Subnet mask : 255.255.255.0
Default gateway : 192.168.2.1
Preferred DNS server : 192.168.2.1

[Code]...

When i boot to Ubuntu 9.10 i dont have internet...but if i restart the PC and enter in Windows 7 there is internet,and is the same connection,the same adresess. How can i make the connection in Ubuntu 9.10 with the same adress,i mean like is in Windows 7?

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: Edimax Router Keeps Crashing?

Dec 27, 2010

The issue is that after a while the lan side doesn't work any more (I don't know whether the wan side still works, but I assume it doesn't)

First we had BR6214K for which the transformator turned out to be broken (at least after a few years it gave 7 instead of 12 volt), only have it's replacement die shortly after. But the issue since the beginning was the network disconnecting every two to three days. Restarting the router solved the problem almost every time.

Now we have the same issue with a brand new BR6226n. This time the disconnection occurs almost every day. Restarting the router has so far worked every time.

Is this more likely to be a router or a computer issue (maybe a broken network card in one of the computers)?

View 1 Replies View Related

Slackware :: Setting Up Pppoe Over Router ?

Feb 9, 2010

How can I setup pppoe over the router on Slackware current? I have setup a WAP network on the other computer through the easy setup tool that linksys provides, but it can't find the internet connection. I am using a linksys WRT54G router.

View 2 Replies View Related

Ubuntu Networking :: Edimax 7811 No Driver?

Oct 8, 2010

I'm going round in circles with this as I'm just not very good at using the command line in Ubuntu. I've bought an Edimax EW-7811Un nano USB wifi adapter, and I'm really cheesed off at the moment because I can't get it to work on my laptop. I've got Ubuntu 10.04 on it. I really want this tiny dongle to work with my computer. Ubuntu is much fats than Windows, and I use it all the time, but my current wifi donlge is an old big monstrosity!

View 9 Replies View Related

Ubuntu Networking :: Edimax 7717un - Connects But No Web Browsing

Mar 2, 2010

Got an Edimax 7717un USB dongle for my Acer aspire 6930 (built-in WiFi is broken). It finds access point OK, but fails to setup with DHCP. If I put in manual IP config, I can ping OK, but I cannot browse web (or even my router's setup page). I get same behaviour on a home brew desktop.

With manual IP config, ping to my router works fine (and very fast, as does ping to 2 or 3 internet web sites. I can traceroute to internet web sites OK as well. With web browsing, if I wait a few minutes some bits of the page may arrive. With connection set to DHCP, Wicd shows WiFi connecting OK, but DHCP setup times out.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Edimax 7727in Wireless PCI Card In 10.10

Oct 22, 2010

I have Maverick Meerkat running perfectly on my laptop and have loaded as dual boot onto my old XP pc as well, I'm quite a newbie and working my way through Ubuntu for Non Geeks.

Problem - apparently this PCI card - Edimax wireless N PCI 7727in card is supposed to work out of the box, it came with the Ralink drivers for Ubuntu RT2860.

the network manager finds the homehub and tries to connect but just continually tries and never actually does it, the card works fine with XP so i know it's not faulty.

if it was a driver fault would the card be working at all? would it try to find the network manager?

I bought this card as previously i was using a Dlink DWA-140 and gave up trying to make it work, this card is advertised as Linux compatible in the Ubuntu forums list and on the card.

View 3 Replies View Related

Ubuntu Networking :: Edimax EW-7711ln Recognized But Cannot Connect?

Jan 25, 2011

I have two PCI network cards: Wired - Successfully connects to the internet and removed from the outputs describes below. Wireless - A new and works well in WinXP - Edimax EW-7711ln: problematic - can't connect. Manufacture says it's supported in Linux. Although in it's site it doesn't have any linux driver to download. The XP driver contain 2 .cab files that cannot be accessed using unshield/cabextract so I guess "ndiswrapper" is not an option. Other Linux disrtos also didn't recognize the wireless as well. Below I added as much information as I could get.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Cannot Load Edimax Wireless Driver

Aug 3, 2011

I have just bought an Edimax EW-7711UTn wireless adaptor with CD. I have the Linux folder on the CD. Folder name 2009_0525_RT3070_Linux_STA_v2.1.1.0. How do I install from this folder

View 5 Replies View Related

Ubuntu Networking :: Edimax WiFi Card Not Working With Karmic

Jan 7, 2010

Finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. I seem to be experiencing a problem many have, being that my wifi card (edimax) which worked on my previous distro is now not working at all. I've done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.

My problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers nothing appears at all. I have no drivers present, where most people are talking of 3. i have not found anyone else with this problem. My problem is compounded in addition by not being about to use a wire connection at all.

View 3 Replies View Related

Ubuntu Networking :: 10.04lts And Edimax Ewg7318 Usb Dongle Won't Work

Jun 17, 2010

I have a elonex web book with UB 10.04lts installed. Now when i installed aircrack package and tried to scan using airodump-ng mon0 (card in monitor mode) it worked fine and picked up my test APs but wouldn't inject. So i downloaded the drive below and now i cant even use airodump it just sits there?

rt73-k2wrlz - 3.0.3-2~ppa0~karmic

[URL]

View 2 Replies View Related

Ubuntu Networking :: 10.10 64bit Driver For Edimax EW-7711 In PCI Card

Mar 15, 2011

I can't find a working driver for this card. Notice that I use 64bit ubuntu.

1. desktop

2. lspci -nn

03:07.0 Network controller [0280]: RaLink Device [1814:3060]

3. iwconfig wlan0
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm

[code]....

View 1 Replies View Related

Ubuntu Networking :: Device Driver Installation For Wifi Edimax?

May 27, 2011

i am trying to install device driver for my usb wireless adapter "Edimax" . i have figured it out that it recognized by device but when i submit command lshw it doesnt show configuration driver for wireless usb. i have drivers for it in the vendor cd as "driver for linux" but i dont know how to install it

View 1 Replies View Related

Ubuntu Networking :: T22 With Edimax PCMCIA Disconnects On Switch To Battery?

Jun 18, 2011

I have just upgraded to 11.04 from an earlier version and most things are working better, if a little slower. Had to remove pulse audio to get any sound. Wifi with Edimax 54G Pcmcia card used to work fully, but now only works on mains, not on battery.Suspected power management but iwconfig shows it is off.Dmesg revealed that the driver had crashed in rt61pci.

Code:
[ 452.171536] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 452.171559] IP: [<e0a441df>] rt61pci_config+0x1f/0x180 [rt61pci]

[code]....

View 3 Replies View Related

Ubuntu Networking :: Repeating Disconnect With Edimax Ew-7318 - Every Few Minutes Or Seconds ?

Aug 6, 2010

I have a usb wireless card called "edimax ew-7318" i used it for a year and it was great- worked out of the box. recently i've been having repeating disconnect problems every few minutes or seconds it will disconnect and then reconnect again

In system log i get:

Code:

It seams like a physical hardware problem but i cant find any physical fault on the card itself.

View 4 Replies View Related

Fedora Networking :: Edimax RT73 USB Recognized But Not Working?

Feb 17, 2009

I have just installed Fedora 10 on a Dell Inspiron 530. I was delighted to see on the very first boot into the system that my Edimax RT73 USB stick was recognised by the system as it was offering a selection of wireless networks to connect to. But oddly, my own network wasn't listed there. I created a new network and entered the network id manually. Once it was in the list, I checked the radio button and saw a message that I am connected to my network. But after a few seconds the network icon disappeared.

I rebooted the system and again went through the same process with the icon disappearing.

I have an Edimax wireless access point with DHCP enabled. The security is WPA2 Personal with AES.

Vista is also dual booting on the same machine and working fine.

View 6 Replies View Related

Ubuntu Networking :: Consulting Regarding Edimax Wifi-usb Supported Modes At Jaunty (master And Ad-hoc)?

Jan 25, 2010

After purchasing few wifi-usb-dongles for my jaunty and lost many hours, i had no success in bringing them to operate as master or ad-hoc.The devices were Belkin, Level1, and a TP-Link 620 Though the Belkin could work as ad-hoc, but very often disconnects due to buffers issue (though I couldn't build the zd1211b driver for jaunty and it seems that no one can really help with that).

Now I would like to consult with you ahead regarding new potential devices, whether you know it operates as master mode or ad-hoc mode under jaunty (9.04)?

My concerns are regarding:
1. Edimax EW-7318UG
2. Edimax EW-7318USg
3. Edimax EW-7711UMN
4. Edimax EW-7711UTN
5. Edimax EW-7311USN
6. Edimax EW-7717 nMax
7. Edimax EW-7718 nMax
[URL]..

View 1 Replies View Related

Ubuntu Networking :: Edimax EW-7128g Wireless PCI Not Working With Ralink RT2561/RT61 Chipset

Sep 5, 2010

Just installed Ubuntu Studio 10.04 and everything seems to be working nicely except I have no networking.

The card does not appear in the Network Settings GUI. The only 3 tabs I have are General, DNS, and Hosts.

A screen grab is attached.

I'm a long time Windows user trying out some of the best Linux creative apps I can find. So, Ubuntu Studio was a no brainer. I checked the manufacturer's site for linux drivers and they are available, but I don't know how current. (Edimax site, not RaLink's site.) I opened the file and it looks like it needs to be compiled and installed to work. Something I know almost nothing about. The card is listed as supported in this forum for Ubuntu 9x but I can't find information about it for 10.04

PS. I have no networking on the system but I can transfer files via USB flash drives if needed.

Some System info:

Code:

1 ) Machine Brand and Model (PC/Laptop): Dell Precision 650

2 ) Wireless Brand, Model and Wireless Chipset: 03:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI

3 ) check interface: robert@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1

[Code].....

View 1 Replies View Related

Fedora Networking :: Edimax Ew-7711utn Wireless Cards Doesn't Work

Nov 15, 2009

I've currently got the beta of fedora 12 installed, hope to upgrade that once the final release comes out. I'm having so many problems getting wireless to work. I've got a edimax ew-7711utn wireless adaptor. It doesn't work. Really what I want is to take it back and get a wireless card that will work.

View 6 Replies View Related

Fedora Networking :: Wireless Card Edimax EW-7711In Doesn't Work

Sep 7, 2011

I installed Fedora 15 64 bits version on my desktop, and I'm having hardtime activating my wireless card.

I tried following the instructions from this thread without success [url]

Here are the logs of some of the commands I used

lspci output

Code:

iwcconfig

Code:

Code:

View 1 Replies View Related

CentOS 5 Networking :: Install Ralink RT61 Driver (Edimax EW-7128g)

Mar 23, 2009

I have just purchased an Edimax EW-7128g with Ralink RT61 chip and physically installed it in a system running CentOS 5.2. Trying to follow the installation instructions, I get the following:

[root@webtest Module]# make all
make -C /lib/modules/2.6.18-92.el5/build SUBDIRS=/root/drivers/2007_1210_RT61_Linux_STA_v1.1.2.0/Module modules
make: *** /lib/modules/2.6.18-92.el5/build: No such file or directory. Stop.
make: *** [all] Error 2

The problem is that although /lib/modules/2.6.18-92.el5/build exists, it appears to be a link:

[root@webtest Module]# ls -l /lib/modules/2.6.18-92.el5/build
lrwxrwxrwx 1 root root 43 Mar 23 15:34 /lib/modules/2.6.18-92.el5/build -> ../../../usr/src/kernels/2.6.18-92.el5-i686

View 7 Replies View Related

Ubuntu Networking :: DLink ADSL Router As Main Router And The Belkin N1 As Repeater?

Apr 13, 2010

Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.

View 9 Replies View Related

Fedora Networking :: F15 - Configuring Wifi Card - Edimax EW-7612PIn With RTL8192SE Chipset

Aug 15, 2011

I have just installed an Edimax EW-7612PIn PCI-E Wifi card which has an RTL8192SE chipset. This chipset is not supported under current F15 kernels so I have installed the driver and firmware from source and have that working fine. The driver can see the card and I can issue 'iwconfig' commands successfully enough to see my Wifi network.

The problem I have is that I don't understand the relationship between iwconfig and wpa_supplicatant and as I'm running a headless F15 server I cannot use the NetworkManager GUI to help me. I should also note that the Wifi network is using WPA2-Personal encryption.

This is what I have done:

Configured /etc/sysconfig/network-scripts/ifcfg-wlan0 with what I think are reasonable values (based on google searches), including the ESSID, TYPE as Wireless, etc.

Configured /etc/wpa_supplicant/wpa_supplicant.conf, including using the key value returned from wpa_passphrase.

Arranged for wpa_supplicant to run from boot, using chkconfig.

However when I run 'ifconfig wlan0 up' I get the error message 'link is not ready' and indeed looking at the output from 'iwconfig wlan0' there are no configured values. I also understand that some values are configured by iwconfig and others by wpa_supplicant, however it's not clear what.

How do I permanently set iwconfig values?

How do I configure wpa_supplicant?

View 3 Replies View Related

Ubuntu Networking :: PPPOE Cant Run?

Jul 16, 2011

I use win7 bit and input the ISP username and password, it runs well,but after I swap system to Ubuntu 11.04 64bit, I cant use the username and password to run DSL successfully.I use the

PHP Code:
sudo pppoeconf 

A text-based menu program will guide you through the next steps, which are:

Confirm that your Ethernet card is detected.
Enter your username (provided by your ISP).
Enter your password (provided by your ISP).

If you already have a PPPoE Connection configured, you will be asked if it may be modified.Popular options: you are asked if you want the 'noauth' and 'defaultroute' options and to remove 'nodetach' - choose "Yes".[code]................

View 1 Replies View Related

Ubuntu Networking :: PPPoe Not Working In 9.10 / What To Do?

Jan 10, 2010

I am a newbie to Linux just installed Ubuntu 9.10 using WUBI. I am not able to connect to Internet using PPPoe. I went thru some of the threads and tried PPPoeconf and it works. So how to configure Network Manager so that it works.

View 1 Replies View Related

Ubuntu Networking :: Lan And Net Not Working Together Using Pppoe?

Jun 5, 2011

i configured net and LAN setting for it but i cannot make them work together using pppoe....how do i dailup both together and work properly..!!

in windows xp i use to untick use default gateway to make them work simultaneuosly but there is no option like that in ubuntu..!!

View 3 Replies View Related

Networking :: Setting Up Linux Box As IPv6 Router To Replace Netgear WNR1000 Wireless Router?

Jun 18, 2011

I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.

As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?

My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?

View 1 Replies View Related

Networking :: Set Up A Laptop As A Router To Connect Wirelessly To ADSL Router?

Nov 6, 2009

I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).

I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.

I have added this to /etc/sysctl.conf on the laptop:

net.ipv4.ip_forward=1

Then I tried this on the laptop:

sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT

This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.

But this doesn't work. The connection doesn't even establish between the laptop and the desktop.

View 12 Replies View Related

Networking :: Network Setup - Router - Wireless Router Card ?

Apr 24, 2010

I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.

Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.

Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).

The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.

Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).

Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.

Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).

My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?

Here is a link to (picture) my network diagram. Network Diagram

View 2 Replies View Related

Ubuntu Networking :: Loading Pppoe After All Processes

Apr 22, 2010

I just got lost. I have set up a server with two nics. eth0 for the lan and eth1 for the Internet. I have dhcp running on the server. I am using adsl and have run pppoeconf to set up my connection. I have turned off dhcp and nat on the router so the device works as a modem using bridge mode.The problem I have is that the server keeps hanging when loading pppoe or at least when pppoe has completed getting the public DNS addresses.What happens is that the Internet connection can be opened from the /network/interfaces file. This seems to work but it does not return control to the server - the process runs, the DNS addresses obtained but the rest of the processes following at start up never load (i.e. power on the server and the processes that load then).

So I thought that this must be in the wrong place. I commented out the items in the interface file and added a couple of entries to end of rc.local, my logic being that this will load after everything has finished. Nearly right but not. What happens is that all processes run and then the pppoe program runs and the DNS addresses obtained (seen from a screen connected to the server). But the system then stops. What should happen is that it continues to load and at the end return the login prompt.From a client I can see that dhcp has loaded since a private IP has been allocated but I cannot login from that client since the server has not finished loading.I am not sure what I have not done here since reading round I can see that what I have followed is the same as everyone else but I get a different result.

View 1 Replies View Related

Ubuntu Networking :: Setup A PPPOE Connection On 10.04?

Apr 29, 2010

I've just done a fresh install of Ubuntu 10.04 lucid lynx and how to setup a pppoe connection in ubuntu. ( thats after 2 hours of googling and trial and error)

system info: its a laptop : Dell Studio XPS 16 connected to a Ethernet hub thats connected to a dsl modem..

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved