Ubuntu Networking :: No Internet On 10.4 With Wireless Card TP-Link
Sep 12, 2010
Ubuntu 10.4 with wireless card TP-Link TL-WN321G the driver installed and it connect to the wireless network but no internet access. I checked everything about the wireless information and everything is fine nothing wrong and the ip address is fine, am new to ubuntu and I don't know how to uninstall or reinstall the driver so I bought another wireless adapter Xtech this one the ubuntu didn't recognize it and I have the cd it came with but the driver is like make file and configure and .a or .c I really want to use ubuntu but without an internet connection no use of it!
I have a D-Link Air DWL-520 wireless card on my desktop computer. It runs well with Windows, but doesn't seem to work with Ubuntu. I am using Lucid Beta 2. I have tried googling, but have not come across any clear solutions on how to make it work.
Could anybody confirm that the D-LINK DWA-556 wireless N PCI-E network card works with Lucid Lynx 64 bit? Im looking for a reliable wireless network card that if possible works out of the box on Lucid 64 bit, so far my search has lead me to the above card, If anyone has hands on experience of this card on lucid 64
I had Ubuntu 8.04 and the D-Link Wireless WNA-1330 PCMCIA card worked just fine. I upgraded to 10.04 and it fails. I can see the network of wireless routers in my neighborhood, but when I try to connect on WEP 40/128bit with my hex key of my router, it tries to connect but can't get a DHCP address. I cannot ping the router in that state, of course. I have two other 10.04 laptops (with built-in wireless) and they connect just fine, as does a Windows Vista laptop. I also tried the pci=noapi item in /boot/grub/menu.lst, but that failed to show any results either. The card lights up like it should, and acts just like it did with 8.04 on the lights, but it doesn't connect. I end up seeing the "Enter your WEP password" dialog again and again unless I hit Cancel.
I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-22.214.171.124, but it still doesn't seem to work. I ran these terminal commands from another thread:
cd Desktop/wlwifi-6050-ucode-126.96.36.199 sudo cp iwlwifi-6050-4.ucode /lib/firmware sudo chmod 644 /lib/firmware/iwlwifi*
After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.
*-network DISABLED description: Wireless interface product: WiMAX/WiFi Link 6050 Series vendor: Intel Corporation
In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.
I have a telephone connection of 1 mega internet modem huawei mt 880 SmartAX my desktop computer is connected via an ADSL PPPoE.I use Ubuntu 10.04 in Spanish and want to know how to connect a WiFi router TP-LINK TL- wr942nd to provide wireless Internet to other 2 PC, a desktop with a plaquet wireles G CNet CWP-854 and 500 series notebook olivetti olibook. The issue is that when I connect the router I can not even go online and do not know how to operate the network, I can not even connect the desktop to my internet provider
I have installed a wireless card in my Ubuntu 9.04 System. When I start Firefox, it keep searching for a while and it cannot connect to the internet. I have attached screen shots of network connections. When I type the address of the router in the browser address window, it cannot access the router.
I am building a CarPC which I'd like to have wireless internet access on. I have Verizon phone service so if there is a Verizon air card (not wireless card, an air card so I can have constant access without having to search for hot spots) that would work with Fedora 10 I would be very happy. I don't really know where to start and I can't find too much on Google, so I'm just looking for what options are available.
I have a Dell Inspiron 1545 computer. I boot into Ubuntu with a flash drive. When I boot, I cannot connect to a wireless network. No available networks are displayed (and I know my router is on) and the Network Manager icon displays no bars. I suspect that the Dell Wireless card (having a Broadcom BCM-4312 chipset) needs a driver. I have tried to intstall both of the restricted drivers (BCM STA and 43xx drivers), but with no success. I have run lspci in Terminal, and got many lines of text. Here are the lines that look relevant to me:
Code: 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) In Windows 7, everything is just fine. In Ubuntu, my wired connection works like a charm, but is not really accessible. Basically, I have to connect to wireless in Ubuntu or I have no reason for having it.
I've decided I want to cross over to Ubuntu from Win vista but there's one thing i cant get working. My wireless card. My wireless card is a Xterasys xn 2523g I can't make this switch until i have the internet working.
I am not really that good with linux, yet, I have a smc 2602W v3 wireless pci card, and I want to install it on linux, so I could access the internet, but I haven't found any solutions yet. Btw latest ubuntu desktop version. Info about the card: [URL]
I'm using Kubuntu 10.04.2 LTS on a Bangho laptop. Kernel 2.6.32-28-generic i686. My card is: Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter iwconfig wlan0 gives me:
Code: wlan0 IEEE 802.11bg ESSID:"Default_WLAN" Mode:Managed Frequency:2.442 GHz Access Point: 00:06:4F:8D:B9:AF Bit Rate=1 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr: off Fragment thr: off
Usually when this happens, for 10 or 20 seconds it appears to be connected (i.e. the heart symbol is there) but I can't ping google or my router, then it "realizes" it's disconnected. It takes one or two attempts to reconnect successfully by pressing the "active" button. Meanwhile throughout the disconnections and re-connections the signal is very strong (98%).
I had the same problem with my old access point, at first I thought it was the cheap/old hardware, so now I bought an "ENCORE ENDSL-A2+WIGX2 | ADSL 2+ Modem with 4 Port Wireless Router". The problem persists only with a stronger signal.
I'm a Linux newbie. Used to use Ubuntu, but I switched to Slackware because I want to learn how Linux works better.
On my Samsung qx410 laptop, I can't connect to the internet. I went to the System Settings -> Network Settings and all the tabs there, but it wouldn't detect any connection, wireless nor wired.
I noticed that the kernel of Slackware 13.1 is out of date, so I tried compiling a newer one, but I couldn't get that to work.
I tried downloading this file: iwlwifi-6050-ucode-188.8.131.52.tgz but even after reading the readme, I had no clue how to go about installing it or even whether it was the right thing to install in the first place.
what I need is : 1/ make run the wifi USB card D-Link DWA-110
2/ I saw I had problems with yum: when I launch the "add/remove programs" button in the menu, if the "c5-media" item is checked (and only this one) and the DVD of centOS is in the drive, then I have this message : "cannot retrieve repository metadata (repomd.xml) for repository: c5-media. Please verify its path and try again" I specify I modified the /var/run/yum.pid file (removed the only number which was here)
the main issue for me is the yum failure, because it could be needed for the wifi problem. one thing after the other! the installation is totally new (except that I modified the yum.pid file).
What would work better with my att internet i have a Option Wireless ICON 322 Unlocked Wireless 3G Internet Card - GPRS/EDGE, USB, Lanyard (AT&T Branded)Or Zoom 4596 3G USB Tri-band Modem for AT&T - Wireless cellular modem - external - Hi-Speed USB - GSM, GPRS, UMTS, EDGE, HSDPA, HSUPA - How would i set tis up with ubuntu 9.10 or 10.04?
Heres the set up I have: one eeepc running ubuntu netbook. with a usb wifi dongle, this is connected to a parabolic antenna i made out of pizza boxes and tin foil. One fujitsu laptop running ubuntu 10.10. the eee connects to the internet via the dongle. then the laptop connects to the eee. I set this up by using network manager. I created a new wirless connection and called it "UbuntuAdhoc". The on-board card connected to this without issue and the laptop was able to connect to the new wireless broadcast by the eees on-board card.
This worked perfectly untill I rebooted the eee. Now the eee is unable to conect to the internet if the on-board caard is conected to "ubuntuadhoc". also the dongle now wants to conect to "ubuntuadhock" too.
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
Just re-installed Bodhi. Ran update, dist-update, set up connection and connection still slow or timing out and reporting errors in 'iwconfig'. This is 3rd re-install of this version. Have also tried 3.0 kernel and pae versions of Bodhi. Cannot get this connection up to speed and without errors. Atheros chipset ar9271.
Sorry for weird subject line and opening paragraph. Trying to make it easy to find and browse in case this gets solved and can help someone else. Not being a Linux guru, I can only hope to help others through my mistakes and ignorance.
I followed instructions to update driver listed at Linux Wireless.
In addition to following the directions at Linux Wireless, I also downloaded the GUI Program to install ath9k_htc.
No luck. My connection reports 1M/s and is reporting "invalid misc:" errors in iwconfig.
I'm running Midori browser but apt-get and wget are also downloading slowly.
I'm connecting to a Zyxel 660 series router using WPA/WPA2.
I've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 184.108.40.206
bash-4.1# ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory
I have a dual boot on my computer - with ubuntu 9.04 jaunty jackalope on one side of the partition, and windows 2000 on the other. I recently bought - and had installed - a new ethernet card: TP-LINK network adapter TF-3239DL. It works perfectly on windows, but not on linux. I understand that the problem is that I need to install the linux driver, which I have available (comes in the CD), but I don't really understand how I am supposed to proceed. The instructions are very unclear to me, and I have relatively little experience.
I am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.
But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?
I've just got a TP-Link wn-851n PCI WLAN card, and the problem is that ubuntu can search for the network, but I can't join into the network after typing the password. I'm sure that it is correct as m Windows notebook is also using that network.
Taking a look in dmesg, and it start to loop this message after I joined the network.
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
my card is not recognized in any way by ifconfig or iwconfig as shown below, but is visible via lsusb. It is 54Mb usb, and has a detachable antenna with the Atheros chipset shown below. I have removed (by #) the ath_pci from the blacklist under /etc/modprobe.d but cannot seem to start this still. I used compat-wireless-2010-06-01 (06-12 appeared to have errors I could not easily overcome). The lspci -nn command only shows my internal broadcom which I am not currently using. My goal is to do wireless research so I need the atheros (among others)...
my hw: Dell series n, TP-Link's TL-WN422G USB wireless stick
$ lsusb | grep Ath Bus 001 Device 004: ID 0cf3:1006 Atheros Communications, Inc. $ lsmod | grep ath ath9k 71145 0
Seems to me that their should only be one ath9k driver, but several are loaded. Are all required for functionality perhaps?