Ubuntu Networking :: Enabling Auto-connect For Reliance Netconnect?

Oct 11, 2010

I have installed ubuntu 32 bit version on my HCL netbook. I use reliance netconnect (Huwai EC 1260 or 168c). I have configured it and it works well. But the only problem is that I have to connect the netconnect device before booting. If I connect it when its ON, the networkmanager does not connect automatically. even on the right on the tray icon, enable mobile broadband option is not there.

View 2 Replies


Ubuntu Networking :: How To Connect Reliance Netconnect (ZTE CDMA 1X) With 9.10 Karmic

Mar 3, 2010

I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration..

View 4 Replies View Related

Ubuntu Networking :: Unable To Connect To Internet With Reliance Netconnect Data Card Using Network Manager

Jan 22, 2010

I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.

View 6 Replies View Related

Ubuntu :: Connect To Reliance Netconnect Broadband?

Jan 15, 2010

i have satanic ubuntu 8. i was trying to connect to my reliance netconnect broadband+ via the following method. the process failed. its a usb broadband dongle thing.

theunknowndoor@theunknowndoor:~$ SU
bash: SU: command not found
theunknowndoor@theunknowndoor:~$ su
su: Authentication failure


View 1 Replies View Related

Ubuntu :: Connect Reliance Netconnect (ZTE CDMA 1X) With 9.10 Karmic?

Mar 3, 2010

I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration.

View 9 Replies View Related

General :: Connect Reliance Netconnect ZTE AC 8710 In Ubuntu 8.04?

Jan 20, 2010

Since few days I am trying to install my Reliance Netconnect Boradband ZTE AC8710 in ubuntu 8.04.i did similar things.in lsusb it showing usb device

root@rspatani-desktop:/dev# lsusb
Bus 004 Device 002: ID 03f0:4917 Hewlett-Packard
Bus 004 Device 001: ID 0000:0000


View 1 Replies View Related

Fedora Networking :: Connect Reliance Netconnect On Fedora?

Jan 23, 2010

I am using Reliance Netconnect Broadband+ (HUAWEI EC 1260) on my Fedora 10 and Fedora 12.

View 1 Replies View Related

Fedora Hardware :: Unable To Install Reliance Netconnect In 13?

Nov 12, 2010

Ii am not able to install reliance netconnect broadband + on my fedora 13. the os is not detecting the usbmodem .it is treating it as a usb storage device only. there is a cross p[latform package supplied by the vendor. on using this. the package after installing gives an error message that "not able to mount usb". the same is running fine on windows xp where it got auto installed without any hiccups. do reply fast to help me install and access the internet through this usbmodem through fedora 13. the model no of the usb modem is ZTE - AC2736.

View 1 Replies View Related

General :: Reliance Netconnect Broadband + ZTE Installation On Fedora 14?

Nov 15, 2010

i recently installed Fedora 14 on my laptop and when im tryin to connect the reliance dongle its not getting detected even as a usb ... when i tried to install it on fed 13 the rpm package inside the usb stick gets installed but when i click on the shortcut for moden it shows "device not connected"

View 1 Replies View Related

Ubuntu :: Reliance Netconnect Broadband Usb Modem With 11.04 - Unable To Access Any Websites

Jul 7, 2011

I have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.

View 9 Replies View Related

General :: Install Reliance Netconnect Lxu800 Modem Graphically (GUI)

Jan 12, 2011

is there anyway that i can install my reliance netconnect lxu800 modem graphically(GUI). i am not well versed with command line interface. i just downloaded ubuntu desktop version and installed it alongside windows vista.

View 2 Replies View Related

Ubuntu Networking :: Cannot Connect Reliance LG LXU Modem800?

Jul 10, 2011

i am beginner to this field of ubuntu(linux)...last week i have installed ubuntu 11.04...alongside windows xp...but i couldnt configure my net connection...i am using reliance LG LXU800 modem(cdma)intially it was working after using this commansudo modprobe usbserial version=0xeab product=0x9357that time my linux version is now it gives fatal error and it isFATAL: Error inserting usbserial (/lib/modules/2.6.38-8-generic/kernel/drivers/usb/serial/usbserial.ko): Unknown symbol in module, or unknown parameter (see dmesg)

View 5 Replies View Related

Networking :: Ethernet Auto-connect / Auto-sense Doesn't Work

Feb 3, 2011

I have noticed that a common issue to several distros is the fact that the networking subsystem doesn't automatically detect the link if an ethernet connection is disconnected and then re-connected to the NIC after boot. If the ethernet cable is connected after the system is up and running, nothing happens - ethtool eth0 shows link detected: no, and you have to restart the network service to let the NIC know that there is in fact a link, and actually connect. I have a Fedora14 (KDE) box with a brand new Asus motherboard with embedded NIC. Everything works great except the auto-detect of a freshly connected ethernet connection if the link is down to begin with.

Am I missing a ethernet link sentinel utility or something, or is this just the way linux works? I have done plenty of research on plenty of posts, and it seems this is a common problem, with no solution other than manually or programatically restarting the network service in a script to detect the link after a disconnect.

View 3 Replies View Related

Ubuntu :: Share Reliance Net Connect With Another Pc Through Lan?

Jun 29, 2011

I use ubuntu on my laptop..and i use reliance net connect data card for accessing the internet..

is there any way by which i can share the reliance netconnect internet connection to another pc to which i am connected through lan?

that pc uses microsoft windows xp..

so that whenever i use my reliance netconnect..that pc connects to me through lan..and is able to use the internet connection as well..

View 8 Replies View Related

General :: Connect Reliance ZTE CDMA Modem In Ubuntu?

Sep 17, 2009

I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command

sudo lshw -C network
lspci -nn


View 6 Replies View Related

General :: Connect Tata And Reliance Boradband Modem

Mar 23, 2010

Here is a method for connect usb modem in linux system.

I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link

I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+

Huwaie/ZTE Modem
Command Mode:

1) Check your NetworkManager rpm for Correct Installation

2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..

3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial

4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf

If this command can't detect your modem then try below commands

i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.

ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command

iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem

Now run the command given in step 4.

5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.

vim /etc/wvdial.conf

Change your username and password with internet/internet. Save and exit.

6) Now try below command..


7) Open /etc/resolv.conf or execute below command

You can also add some global DNS echo "nameserver" >> /etc/resolv.conf

8) try to ping any site

If you get the response then you are all set for the modem, ENJOY SURFING with high Speed

GUI Mode:

Right Click on the Netowk icon on your status bar

NetowkManager > Mobile Brodband > Add

Simply follow the instructions given in GUI and setup your modem

Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,

If you face any problem then set SELinux ini permissive mode and then try.

I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..

View 1 Replies View Related

Ubuntu Networking :: Auto Connect VPN Only On Certain WLANs?

Apr 13, 2010

I have searched for an advanced network mangager, like the one available for Nokia's Maemo with no luck.

I want to automatic connect my x200 laptop to a VPN connection When I am home on my LAN (eth0) and when I am using certain Wireless networks.

I don't want to use my VNC connection everytime I connect to the internet, just on these networks, so I wont mark the checkbox in the vpn settings.

View 1 Replies View Related

Ubuntu Networking :: Cannot Connect To Auto Etho1

Sep 7, 2010

I just downloaded the lastest version of ubuntu to my compaq laptop. I then proceeded to plug in my ethernet cable to establish an internect connection. Under wired connection, it says auto etho1 but, the computer will not connect to it and I have no internet connection.

View 9 Replies View Related

Ubuntu Networking :: Auto-connect To Wifi

Nov 30, 2010

I just installed the XBMC from the XBMC live CD. I want to configure it in a way to auto-connect to internet. (my router is wpa-password protected.)

i know how to save the password and auto connect to internet from gnome GUI but not how to do it from command line. what should i install, change or configure in order to auto connect to internet? (using command line)

View 1 Replies View Related

Ubuntu Networking :: Auto-connect At Boot?

Jun 23, 2011

I am running 11.04 and have a netgear USB wireless NIC. When I am logged in I can connect to the wireless network through the USB adapter without any problems.I wish to use the machine as a part time home server and so have installed samba, LAMP etc however when I start the machine the NIC is not activated until I have logged in.

In the past I have done this but only ever over a wired ethernet connection, never wireless? Can some one please point me in the right direction?

View 4 Replies View Related

Networking :: How To Auto-disconnect And Connect

Jan 19, 2010

I am checking something out in my connection and i just wanted to ask, is there a way to auto-disconnect and connect from the internet, for example say I want to disconnect now and reconnect to the internet in 0.05 seconds, is there any program that does that?

View 1 Replies View Related

Ubuntu Networking :: Wifi Auto-connect On Start-up?

Jan 27, 2010

How does one get the wifi to auto connect upon start up, instead of having to manually select it every time i log on? I think the following script is what i need but im not sure where i would even need to install it.Automatic WLAN Picker Script

View 4 Replies View Related

Ubuntu Networking :: Auto Eth0 - Network - Won't Connect ?

May 2, 2010

Upgraded To Ubuntu 10.04 The Other Day. And when I first installed it everything worked great except for my sound card which I fixed. But there was no problem with connecting to my Router via an Ethernet cable. Then I updated the video card drivers, restarted my PC and it wouldn't connect. It would try over around 1-2 mins then tell me its disconnected. No green light activity on the router / network card either.

I've reinstalled fresh copies of Ubuntu a couple of times now, Hoping to get the default settings back. But nothing has worked since.

I looked around the net and found quite a few people had this problem on previous versions of Ubuntu but it would seem most of there fixes were for there Version, so it hasn't helped me.

Heres some info:


I've tried all the various things from dhclient to ifup/ifdown etc etc.

View 9 Replies View Related

Ubuntu Networking :: Wireless Network Won't Auto Connect?

Jan 28, 2011

I've been trying to get and old PCI wireless card to work on Ubuntu 10.04. The card is a Zonet 1602. It was not recognized automatically.

I have been able to get it to work using ndiswrapper except that when the computer is started it does not automatically connect to the network. I can click on the network icon and select my network from a list and it will connect, including properly authenticating the network key.

I have worked through a lot of information on the web but much of it seems to apply to earlier versions of Ubuntu and some if it does not match what I'm seeing in 10.04.

There is a built in Ethernet controller on the mother board but I have disabled it in the BIOS.

View 3 Replies View Related

Ubuntu Networking :: Bluetooth Mouse Does Not Auto-connect

Feb 5, 2011

Im using a Samsung R420/R470 laptop with Broadcom bluetooth and a Prolink PMO624B mouse.My mouse works when I add it as a new device, but if I off the mouse and on it again, the mouse does not auto connect. I have to press and hold the connection button under the mouse and reconnect to the mouse.The mouse says that it is linux compatible, so I guess its a problem with my bluetooth drivers.

View 3 Replies View Related

Networking :: How To Configure VPN To Auto Connect In Fedora?

Dec 13, 2010

I'd like to know how to configure Fedora 14 so my VPN connects and reconnects itself automatically, since the "connect automatically" thing I checked in the network manager doesn't work.Is there a way to make sure that everything uses the VPN, so when for some reason the VPN is disconnected the applications will wait for the VPN to reconnect itself instead of switching to the regular network ?Also since it's pptp VPN I tried to disable Ipv6 but I don't know how to check if I successfully did it, can you guys give me the command line to check that ?

View 2 Replies View Related

Ubuntu Networking :: Network Doesn't Auto-connect At Startup

Jan 5, 2010

I have a Broadcom 4312 wireless chip. I have use the STA drivers that Ubuntu recommends. I can connect quite easily just by clicking on the icon, so this is more than a niggle than a problem.

My network isn't protected as we live in the middle of nowhere (quite literally) and network theft isn't a problem. We also run a self-catering cottage, and let guests have free access to our network anyway, so it is easier for guests to access our network without me having to give them all the key. When I did use wpa, it would start itself up with the laptop, so I kind of know that this might be the cause. Is there any way I can fix it without encrypting the network?

View 2 Replies View Related

Debian Configuration :: Auto-login And Auto-connect To Networks

Jun 3, 2010

I press On-button, Debian boots, logs in and automatically connects to the Wireless network AND! to my local pc via LAN. It runs an ssh server, so I can ssh into debian over internet and communicate with the local pc (send a magic packet).Here are my problems:

1) I don't how to log in automatically. This and this doesn't work.
2) I need a network tool that can manage multiple connections and has a reconnect feature. With the default network manager I cannot even connect to more than one network simultaneously although I have two network devices of course.

And I guess I can run all that in console mode, right?

View 10 Replies View Related

Ubuntu Networking :: Karmic: Make A Bluetooth Device *not* Auto-connect?

Mar 5, 2010

I have a nifty new headset (a JawBone icon�the noise cancellation is incredible) and I've successfully connected it to my Karmic laptop (64 bit, for the off chance it makes a difference). The trouble is, I only occasionally want to connect it to my laptop; I mostly use it with my mobile 'phone.

The two devices fight over my new toy a lot, and invariably the laptop wins, contrary to what I want. It seems a pain to have to rediscover the headset every time I want to use VIOP or whatever, so is there a way to add a device to Karmic's Bluetooth list, but not have it connect whenever it sees it?

View 4 Replies View Related

Fedora Networking :: Can't Auto Connect To Hidden Wireless LAN Via NetworkManager On F13

Jun 23, 2010

have to connect to it manually every time i log in where i'll get prompted for the root password to connect.

things worked fine on F12.

View 3 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved