Ubuntu Networking :: Consulting Regarding Edimax Wifi-usb Supported Modes At Jaunty (master And Ad-hoc)?

Jan 25, 2010

After purchasing few wifi-usb-dongles for my jaunty and lost many hours, i had no success in bringing them to operate as master or ad-hoc.The devices were Belkin, Level1, and a TP-Link 620 Though the Belkin could work as ad-hoc, but very often disconnects due to buffers issue (though I couldn't build the zd1211b driver for jaunty and it seems that no one can really help with that).

Now I would like to consult with you ahead regarding new potential devices, whether you know it operates as master mode or ad-hoc mode under jaunty (9.04)?

My concerns are regarding:
1. Edimax EW-7318UG
2. Edimax EW-7318USg
3. Edimax EW-7711UMN
4. Edimax EW-7711UTN
5. Edimax EW-7311USN
6. Edimax EW-7717 nMax
7. Edimax EW-7718 nMax
[URL]..

View 1 Replies


ADVERTISEMENT

OpenSUSE Wireless :: Edimax WiFi Cards Is Supported?

Mar 14, 2011

which chipsets are on the PCi and PCie cards, EW7722in and EW-7612PIn, and whether they can be made to run on a linux system. My system is recent (Linux home 2.6.37.2-0.6-default kernel) Do they have the same chipset as EW-7711In, which I notice has explicit linux support? Now this was on the 3/03/2011, and I had given up getting any kind of useful support, but I got a reply today. I hope they wont mind if I quote them:

[Code]...

View 4 Replies View Related

OpenSUSE Network :: Wifi Master Mode Not Supported Using Yast?

Jun 2, 2010

after trying several pci and usb network cards none were able to have their ssid broadcasted. The question that i have is: Can a suse box be converted to act as an acces point without the use of atheros based hardware, without switching over to ubuntu and or debian, without the use of openwrt?

View 4 Replies View Related

Ubuntu Networking :: Edimax WiFi Card Not Working With Karmic

Jan 7, 2010

Finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. I seem to be experiencing a problem many have, being that my wifi card (edimax) which worked on my previous distro is now not working at all. I've done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.

My problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers nothing appears at all. I have no drivers present, where most people are talking of 3. i have not found anyone else with this problem. My problem is compounded in addition by not being about to use a wire connection at all.

View 3 Replies View Related

Ubuntu Networking :: Device Driver Installation For Wifi Edimax?

May 27, 2011

i am trying to install device driver for my usb wireless adapter "Edimax" . i have figured it out that it recognized by device but when i submit command lshw it doesnt show configuration driver for wireless usb. i have drivers for it in the vendor cd as "driver for linux" but i dont know how to install it

View 1 Replies View Related

Fedora Networking :: F15 - Configuring Wifi Card - Edimax EW-7612PIn With RTL8192SE Chipset

Aug 15, 2011

I have just installed an Edimax EW-7612PIn PCI-E Wifi card which has an RTL8192SE chipset. This chipset is not supported under current F15 kernels so I have installed the driver and firmware from source and have that working fine. The driver can see the card and I can issue 'iwconfig' commands successfully enough to see my Wifi network.

The problem I have is that I don't understand the relationship between iwconfig and wpa_supplicatant and as I'm running a headless F15 server I cannot use the NetworkManager GUI to help me. I should also note that the Wifi network is using WPA2-Personal encryption.

This is what I have done:

Configured /etc/sysconfig/network-scripts/ifcfg-wlan0 with what I think are reasonable values (based on google searches), including the ESSID, TYPE as Wireless, etc.

Configured /etc/wpa_supplicant/wpa_supplicant.conf, including using the key value returned from wpa_passphrase.

Arranged for wpa_supplicant to run from boot, using chkconfig.

However when I run 'ifconfig wlan0 up' I get the error message 'link is not ready' and indeed looking at the output from 'iwconfig wlan0' there are no configured values. I also understand that some values are configured by iwconfig and others by wpa_supplicant, however it's not clear what.

How do I permanently set iwconfig values?

How do I configure wpa_supplicant?

View 3 Replies View Related

Ubuntu Networking :: Jaunty Wifi Very Slow - 327W Router

Jun 14, 2010

I was introduced to Ubuntu about a year ago and recently decided to come back to using the OS. I now dual boot it with Windows XP Home. My former setup was with Wubi but now I have it installed on an actual partition. (The Wubi install, for whatever reason, had little internet problems.) I use wireless internet, and though my network card was recognized out of the box and can connect to my network, the Internet is very slow. It takes almost a minute to look up Google. Also, Firefox will often report that it cannot find the server for whatever website I try to look up, after trying to connect to it/look it up. I also cannot access the web configuration page for my router. (192.168.1.1). The network app reports that I often have a signal strength of 40% or lower. The following is my hardware/internet:

Ubuntu 9.04 Jaunty
TrendNet TEW-424UB adapter (54mbps)
Westell VersaLink 327W router
ISP: CenturyTel/CenturyLink High speed internet (512kbps)

I am the only Linux computer on my network. (There is no encryption on my network. I know there should be. but my parents are not very computer literate and they are the ones who have access to the network. It is easier just to go without.)

I have tried disabling ipv6, setting custom DNS server names under ipv4, and setting the wlan rate (or something similar) to 1492. Nothing works. This does not seem to be a network problem because my internet works fine in Windows, and I can access the configuration page for my router to change channels, PPP, etc..

View 1 Replies View Related

Ubuntu Networking :: TP-Link Wifi USB Adapter: Cannot Setup It In Master Mode To Use PC As A Router

Jun 10, 2010

I got two issues with my wifi usb adapter:

1) it cannot see any networks around
2) i cannot setup it in master mode to use my PC as a router

As far as i can see, the device is recognized and the correct driver (rt73usb) is loaded. I was able to connect to a laptop somehow (the laptop could see other networks and the adapter's PC-to-PC network). I'd like to make it work as a router, i.e. share my internet connection (eth0) via wlan0. Here is what i have:

Code:
Ubuntu 10.04
Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
TP-Link TL-WN321G wifi usb adapter as seen as
Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
$ iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:off/any
[Code]....

View 4 Replies View Related

Ubuntu Networking :: Get The Above Wifi Card Working As It Is Not Supported?

Jan 17, 2010

i was wondering how to get the above wifi card working as it is not supported.

View 1 Replies View Related

General :: Edimax EW-7128G WIFI In Ubuntu 9.10?

Feb 23, 2010

i had an old Dell collecting dust and i've wanted to dive into Linux so i bought a wireless card for it. It's an Edimax EW-7128G, the reason i bought it is because there were multiple positive reviews on how well it works in linux. Ok, so i don't know linux at all. I installed Ubuntu to learn. I installed the card and as far i can see it's not working. It came with a disc with linux drivers yet i don't know how to go about using them.

View 7 Replies View Related

Hardware :: Wifi NIC Edimax EW-7711In Compatibility - Aircrack-ng

Feb 23, 2011

I am planning to buy wifi NIC, and I would like to have it very compatible with Linux systems and also aircrack-ng apps.

Seemingly best choice for me is Edimax EW-7711In, which should have Ralink RT3062 chipset (source - WikiDevi.com), which has official drivers for Linux (source - Ralinktech.com). Also, Edimax website provides drivers for Linux (name of file contains RT3062, so I consider chipset verified).

My question is, does anybody have this card? Can you confirm it's functionality under Linux? Are you satisfied with your choice? Anyone with same chipset?

Note: Not meant to be advertisement. I haven't ever bought any card from them, neither bought any PCI wifi NIC.

View 6 Replies View Related

Hardware :: USB Wifi With Master Mode?

Jan 6, 2010

I'm looking for a USB wifi which supports master mode, 11n modulation, 5GHz band (with master and ad-hoc support for this band) and has detachable antenna connector.

View 1 Replies View Related

Ubuntu Multimedia :: Jaunty ATI Xserver No Backfill After Jaunty-proposed Update

Jan 9, 2010

Been using since summer 2009 the xserver no backfill from PPA: [URL] and it was working fine with my ATI video card. No heavy CPU usage when restoring from minimized and a general performance boost were the results of that use.But recently made an upgrade and realized that xserver-xorg-core package (check it from synaptic manager) has been upgraded to a jaunty-proposed version and the problems started to appear again!So using Synaptic I selected this package and hit CTRL-E key in order to choose the nobackfill version. This way things got back to normal!

View 2 Replies View Related

Networking :: ASCII / Binary FTP Transfer Modes

Sep 14, 2009

I had a problem with the old good ascii/binary FTP transfer modes. I transferred some files (SQL scripting files, in which carriage returns DO matter) using FTP from a windows system to a linux system using filezilla "auto" mode, that should have resulted in ASCII mode for my sql files. These files are well formed and identical to the originals.

Then, someone else picked these files and moved them to another ftp server. I finally found that all <CR><LF> couples have been transformed in <CR><CR><LF>. I guessed that the problem was in the ASCII transfer mode - but, how comes that <CR><LF> => <CR><CR><LF>? I would have rather expected <CR><LF> to become <CR>.

View 2 Replies View Related

CentOS 5 Networking :: 2 Bond Interfaces 2 Different Modes

Dec 7, 2010

I have 4 NICs and am trying to create 2 bonds. The first bond is mode 1, the second is mode 4. What happens though is makes both bonds mode 1. Here's my modeprobe.conf:

alias bond0 bonding
options bond0 miimon=80 mode=1
alias bond1 bonding
options bond1 miimon=100 mode=4 lacp_rate=1

View 4 Replies View Related

Networking :: Change Between 2G/3G Modes On A USB Stick Modem. (Alcatel X220)?

Mar 30, 2011

I have just bought a new netbook and now it runs ARCH linux.To connect to the internet I am using an Alcatel x220 USB 3G modem dongle and wvdial (with pywvdial) and here is wvdial.conf

Code:
[Dialer Defaults]
Init1 = ATZ

[code]...

View 5 Replies View Related

Ubuntu Networking :: PPPoE Through Router EDIMAX In U 9.10?

Feb 21, 2010

I have 2 PC's : a desktop and an notebook(IBM).On my desktop i have Windows 7 and Ubuntu 9.10,and on my notebook(IBM) is Windows XP SP3. Both of the PC's are conected to internet over an PPPoE conection in Windows thorugh my router(EDIMAX).

My desktop has the following :
IP adress : 192.168.2.100
Subnet mask : 255.255.255.0
Default gateway : 192.168.2.1
Preferred DNS server : 192.168.2.1

[Code]...

When i boot to Ubuntu 9.10 i dont have internet...but if i restart the PC and enter in Windows 7 there is internet,and is the same connection,the same adresess. How can i make the connection in Ubuntu 9.10 with the same adress,i mean like is in Windows 7?

View 2 Replies View Related

Ubuntu Networking :: Edimax 7811 No Driver?

Oct 8, 2010

I'm going round in circles with this as I'm just not very good at using the command line in Ubuntu. I've bought an Edimax EW-7811Un nano USB wifi adapter, and I'm really cheesed off at the moment because I can't get it to work on my laptop. I've got Ubuntu 10.04 on it. I really want this tiny dongle to work with my computer. Ubuntu is much fats than Windows, and I use it all the time, but my current wifi donlge is an old big monstrosity!

View 9 Replies View Related

Ubuntu Networking :: Edimax Router Keeps Crashing?

Dec 27, 2010

The issue is that after a while the lan side doesn't work any more (I don't know whether the wan side still works, but I assume it doesn't)

First we had BR6214K for which the transformator turned out to be broken (at least after a few years it gave 7 instead of 12 volt), only have it's replacement die shortly after. But the issue since the beginning was the network disconnecting every two to three days. Restarting the router solved the problem almost every time.

Now we have the same issue with a brand new BR6226n. This time the disconnection occurs almost every day. Restarting the router has so far worked every time.

Is this more likely to be a router or a computer issue (maybe a broken network card in one of the computers)?

View 1 Replies View Related

Debian Configuration :: GUI Didn't Install And WiFi Card Is Not Supported

Nov 28, 2015

I've been using Ubuntu and Mint for a few years now, and I want to try Linux on my HP Stream7 Tablet. I was very excited to learn that Debian 8.0 and later has support for 32 bit UEFI on 64 bit Processors and went ahead and installed the multiarch version of 8.2. It works, but I have no GUI (Just a command line) and no WIFI connection. It seems the GUI didn't install and the WiFi card is not supported. I have found a driver for the wifi card but don't know how to install this driver. URL....

View 4 Replies View Related

Server :: Local Master Browser Do Not Sync Their List With The Domain Master

Nov 13, 2009

I'm managing a residential network. Each flat is its own subnet, and can only communicate with the other flats through a router (i.e. no broadcast). 95% of these 300 subnets only contains windows computers (from lambda users).

My final goal is to be able to browse the entire network from any computer.

I set up a samba server acting as a wins server, and every computer is aware of it because it is registered in the dhcp. So name resolution is working fine for everyone.

The same samba server is set to be the "Domain master browser":

workgroup = WORKGROUP
wins support = yes
prefered master = yes
local master = yes
domain master = yes
os level = 65

When I browse the network (using "net view" or "browstat view"), I can only see the servers which are in the same subnet as the domain master browser.

Now, when in a subnet the computers arrange themselves to find a "local master browser", the only visible computers are the one in that subnet.

What I don't understand is why all the local masters don't synchronize their lists with the domain master.

So, to sum up, every subnet get the following behaviour:

-if a local master is elected, the only visible computers are the one in the same subnet.

-if no local master is elected, the only visible computers are the one in the subnet of the domain master.

-if I add another samba, configured as a local master winning all elections, then the magic is working and the lists are synchronized.

What is expected:
-every computer can see all the computer from all the subnets.

View 1 Replies View Related

Ubuntu Networking :: Edimax 7717un - Connects But No Web Browsing

Mar 2, 2010

Got an Edimax 7717un USB dongle for my Acer aspire 6930 (built-in WiFi is broken). It finds access point OK, but fails to setup with DHCP. If I put in manual IP config, I can ping OK, but I cannot browse web (or even my router's setup page). I get same behaviour on a home brew desktop.

With manual IP config, ping to my router works fine (and very fast, as does ping to 2 or 3 internet web sites. I can traceroute to internet web sites OK as well. With web browsing, if I wait a few minutes some bits of the page may arrive. With connection set to DHCP, Wicd shows WiFi connecting OK, but DHCP setup times out.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Edimax 7727in Wireless PCI Card In 10.10

Oct 22, 2010

I have Maverick Meerkat running perfectly on my laptop and have loaded as dual boot onto my old XP pc as well, I'm quite a newbie and working my way through Ubuntu for Non Geeks.

Problem - apparently this PCI card - Edimax wireless N PCI 7727in card is supposed to work out of the box, it came with the Ralink drivers for Ubuntu RT2860.

the network manager finds the homehub and tries to connect but just continually tries and never actually does it, the card works fine with XP so i know it's not faulty.

if it was a driver fault would the card be working at all? would it try to find the network manager?

I bought this card as previously i was using a Dlink DWA-140 and gave up trying to make it work, this card is advertised as Linux compatible in the Ubuntu forums list and on the card.

View 3 Replies View Related

Ubuntu Networking :: Edimax EW-7711ln Recognized But Cannot Connect?

Jan 25, 2011

I have two PCI network cards: Wired - Successfully connects to the internet and removed from the outputs describes below. Wireless - A new and works well in WinXP - Edimax EW-7711ln: problematic - can't connect. Manufacture says it's supported in Linux. Although in it's site it doesn't have any linux driver to download. The XP driver contain 2 .cab files that cannot be accessed using unshield/cabextract so I guess "ndiswrapper" is not an option. Other Linux disrtos also didn't recognize the wireless as well. Below I added as much information as I could get.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Cannot Load Edimax Wireless Driver

Aug 3, 2011

I have just bought an Edimax EW-7711UTn wireless adaptor with CD. I have the Linux folder on the CD. Folder name 2009_0525_RT3070_Linux_STA_v2.1.1.0. How do I install from this folder

View 5 Replies View Related

Ubuntu Networking :: 10.04lts And Edimax Ewg7318 Usb Dongle Won't Work

Jun 17, 2010

I have a elonex web book with UB 10.04lts installed. Now when i installed aircrack package and tried to scan using airodump-ng mon0 (card in monitor mode) it worked fine and picked up my test APs but wouldn't inject. So i downloaded the drive below and now i cant even use airodump it just sits there?

rt73-k2wrlz - 3.0.3-2~ppa0~karmic

[URL]

View 2 Replies View Related

Ubuntu Networking :: 10.10 64bit Driver For Edimax EW-7711 In PCI Card

Mar 15, 2011

I can't find a working driver for this card. Notice that I use 64bit ubuntu.

1. desktop

2. lspci -nn

03:07.0 Network controller [0280]: RaLink Device [1814:3060]

3. iwconfig wlan0
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm

[code]....

View 1 Replies View Related

Ubuntu Networking :: T22 With Edimax PCMCIA Disconnects On Switch To Battery?

Jun 18, 2011

I have just upgraded to 11.04 from an earlier version and most things are working better, if a little slower. Had to remove pulse audio to get any sound. Wifi with Edimax 54G Pcmcia card used to work fully, but now only works on mains, not on battery.Suspected power management but iwconfig shows it is off.Dmesg revealed that the driver had crashed in rt61pci.

Code:
[ 452.171536] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 452.171559] IP: [<e0a441df>] rt61pci_config+0x1f/0x180 [rt61pci]

[code]....

View 3 Replies View Related

Ubuntu Networking :: Repeating Disconnect With Edimax Ew-7318 - Every Few Minutes Or Seconds ?

Aug 6, 2010

I have a usb wireless card called "edimax ew-7318" i used it for a year and it was great- worked out of the box. recently i've been having repeating disconnect problems every few minutes or seconds it will disconnect and then reconnect again

In system log i get:

Code:

It seams like a physical hardware problem but i cant find any physical fault on the card itself.

View 4 Replies View Related

Fedora Networking :: Edimax RT73 USB Recognized But Not Working?

Feb 17, 2009

I have just installed Fedora 10 on a Dell Inspiron 530. I was delighted to see on the very first boot into the system that my Edimax RT73 USB stick was recognised by the system as it was offering a selection of wireless networks to connect to. But oddly, my own network wasn't listed there. I created a new network and entered the network id manually. Once it was in the list, I checked the radio button and saw a message that I am connected to my network. But after a few seconds the network icon disappeared.

I rebooted the system and again went through the same process with the icon disappearing.

I have an Edimax wireless access point with DHCP enabled. The security is WPA2 Personal with AES.

Vista is also dual booting on the same machine and working fine.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved