Ubuntu Networking :: Configure Manual IP Via Network Manager?

Apr 25, 2010

Networkmanager applet does not allow setting ip address manually. The "Apply" button is grey. Is this a bug?

View 3 Replies


ADVERTISEMENT

Ubuntu Networking :: Configure Internet Access Using KDE Network Manager?

Jul 1, 2010

I'm trying to configure internet access using KDE network manager. Added new VPN pptp connection, set gateway and other options but manager tries to connect for about a minute and breaks then. Here is /var/log/daemon.log

Code:
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started

[Code]....

As I understand the main problem is in "(IP Config Get) timeout exceeded".

Configuration: Kubuntu 10.04 x86, VPN server with MSCHAPV2 auth, no compression, no encrypting.

View 1 Replies View Related

OpenSUSE Network :: Configure A Connection With YAST As Well As With Network Manager?

Feb 1, 2010

Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.

I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).

I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.

View 1 Replies View Related

OpenSUSE Network :: Cannot Start Network Manager - To Configure My Wlan ?

Nov 27, 2010

I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.

View 4 Replies View Related

Fedora Networking :: Set Up Manual Network Connection?

Dec 3, 2009

i have no problem with DHCP Internet conection, when i set up to manual and manually imput an IP ADDRESS-NETMASK-GATEWAY y get local red but not Internet. Im i missing something, i cant find a guide for dummies.

View 3 Replies View Related

Ubuntu :: How To Configure Network Manager In Lxde

Jul 23, 2010

I just installed lxde on an ubuntu lucid box and after logging into it I found that the network manager applet doesnt start automatically and hence no internet connection. Though I could easily setup the net using ifconfig, I want to use network manager as this pc is used by my brother whos a beginner. In the terminal if I give "nm-applet &" the applet starts and the notification daemon states "connection established" but still internet is not available. So how can I configure the network manager in lxde?

View 1 Replies View Related

Ubuntu :: Network Manager To Configure Eth0 Interface - File Does Not Carry The Ip

Mar 31, 2011

I used the network manager to configure my eth0 interface.It is working fine. I have found the nameserver entries in /etc/resolv.conf files. But the /etc/network/interfaces file does not carry the ip, netmask, gateway,network and broadcast entries. It only has a entry for the lo interface. where are the settings for eth0 as done by the network manager, stored in case of ubuntu?

View 7 Replies View Related

Ubuntu Networking :: Network Manager Will Not Auto-connect To New Network After Resume?

Jul 1, 2010

I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:

Code:
#!/bin/sh
case "$1" in

[code]....

View 5 Replies View Related

Ubuntu Networking :: Network Manager Stopped Recognizing Wireless Network

Jan 24, 2011

I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...

Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.

P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?

View 2 Replies View Related

Ubuntu Networking :: Sudo Iwlist Scan Works But Cannot Connect To Network Using Network Manager

Jun 14, 2010

I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.

View 4 Replies View Related

CentOS 5 Networking :: Configure Server1 To Have A Different Hostname On The Standard Network Than On The Virtual Network?

Oct 5, 2010

I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:

/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Network-Manager Tries Always To Autoconnect To Wired Network

Feb 18, 2010

I have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?

View 4 Replies View Related

Ubuntu Networking :: Network-manager And Wicd Can See But Not Connect To Network

Jul 10, 2010

I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".

I've found many, many threads with people who had the same problem, but none of their fixed worked for me.

I also tried to get wifi going manually, using this guide, but that didn't work.

View 3 Replies View Related

Networking :: Configure A Network Route To A Host For Testing Network Interface?

Aug 30, 2010

today I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:

Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.

How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?

View 5 Replies View Related

Ubuntu Networking :: Way To Ban A Wifi Network In Network Manager

Oct 26, 2010

My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?

View 4 Replies View Related

SUSE / Novell :: How To Switch Network Manager From YAST Back To Efault Network Manager?

Mar 2, 2010

I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.

View 7 Replies View Related

Ubuntu Networking :: Networking In 10.04 - In Network Manager There Is Not Way To Select My Modem In The First Step

May 3, 2010

I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?

View 1 Replies View Related

Ubuntu Networking :: Network Manager Applet Enable Networking Unchecked

Apr 2, 2011

Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..

OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?

View 6 Replies View Related

Ubuntu Networking :: Networking Connections Not Listed In Network Manager

Aug 23, 2010

Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.

Code:

/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in

[code]....

View 4 Replies View Related

Ubuntu Networking :: Configure Static IP - Use Of 'network'?

Apr 15, 2011

I'm setting up a home webserver with Ubuntu 10.10 and want to configure the interface to static. I'm using a router, which is setup and working correctly. I have been using linux workstation with dhcp for some time.

I've edited my interfaces file to reflect the parameters for setting static ip, with the exception of 'network'. No matter what I put into this setting, it causes me to loose connectivity to the outside world. I've tried to put my router IP, and my IP set by my provider. What should the 'network' value be?

At this time, my 'interfaces' files only includes the following and has connectivity out to the internet:

Code:

Do I need the 'network' settings as shown in every tutorial (but never explained)?

View 1 Replies View Related

Ubuntu Networking :: Boot Computer And Network Manager Shos "no Network Devices Available"?

May 10, 2010

Loaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.

View 4 Replies View Related

Debian Configuration :: Manual Network Config

Jun 30, 2015

I have just installed Debian Weezy and for some reason it just does not see my router.1) is there a good network config script I can use?if not then what files must be edited to setup the network?When I attempt to ping the router, it does not see it. I have checked the cables etc.

View 6 Replies View Related

General :: Manual RHEL 6 Network Configuration?

Oct 12, 2010

I installed RHEL 6 Beta 2 on ESX box and found that network is to be manually started through ifup command.

View 6 Replies View Related

Ubuntu Networking :: Network Manager Keeps Asking For WEP Key?

Feb 27, 2010

Since the last update the 'wireless network authentication required' box keeps asking me for my wep key. Everything was working fine previously, I've even re-installed ubuntu just in case it was something I did....again everything was working OK until I installed the latest Nvidia drivers and updated ubuntu.I can see my wireless connection when I click on the network manager icon I just wont connect.Wired connection works fine.

05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)

View 3 Replies View Related

Ubuntu Networking :: How To Get Network Manager Log

Jul 24, 2010

I'm using NM applet to connect to the Internet.I just need to know my Internet usage details such as Connection Duration,Data sent and received.

View 2 Replies View Related

Ubuntu Networking :: How To Use Network Manager

Sep 22, 2010

I'm trying to change my network settings under Gnome and 9.10.

System->Preferences->Network Connection brings up "Network Connections". Under the "wired" tab, I see "ifupdown (eth1)". The edit button on the right side is grayed out.

Is this where an IP address can be config'ed, or is it somewhere else?v

View 3 Replies View Related

Ubuntu Networking :: Configure My Network Card Using The B43 Driver

Jun 24, 2011

I'm trying to configure my network card using the b43 driver. I'm running 10.04.2 on the kernel version 2.6.35-25-generic-pae.

Surprisingly, I was able to connect to my home wireless network using the b43 driver without a problem. The only issue is that it doesn't automatically connect. I have to use the following command in order to get it to work:

Code:

After typing my password, I wait for 10 seconds and am automatically connected. My question is, how do I configure my system to do this for me permanently (or at least automatically) so I don't have to type it every time I log on?

View 8 Replies View Related

Networking :: Configure AD-hoc Network Between Two Systems?

Mar 9, 2011

I am doing a project based on the AD-HOC network. i have to do this on the two linux systems currently i am using fedora 13 and opensuse 10.3 beacuse the two laptops supports only these. the exact problem is how to configure the adhoc network to connect these two systems urgent reply needed please

View 1 Replies View Related

Networking :: Configure Network In OEL On VMware

Aug 5, 2010

I installed OEL4 on both of my Laptops using VMware with Windows 7 as HOST.

I want to configure RMAN. So I need individual IP addresses.

Now how can I ping these both Linux (OELs) from VMwares.?

How to configure the network b/w these two? I have a Ethernet cable. (No router)

In simple:

How to ping two Guest OSs (which are installed on two diff Laptops) which are in VMware with windows 7 as Host.?

View 3 Replies View Related

Ubuntu Networking :: How To Add A Script To Network Manager

Jan 2, 2010

I've installed Karmic after using Jaunty for a year. In Jaunty, my wireless Belkin USB adapter would get it's best signal if I set the rate at 11M...sudo iwconfig wlan0 rate 11MTo avoid having to enter that in terminal after a reboot, I followed the advice of Raven on another thread that suggested using WICD instead of Network Manager, as there were options for scripts in WICD that would allow a startup script...sh -c "/sbin/iwconfig wlan0 rate 11M"This doesn't seem to be working for me in Karmic (my connection constantly drops). Plus, the new icons for WICD are distracting (it changes color from green to yellow when the signal goes from good to low) With Network Manager and setting the rate @ 11M via terminal, everything seems rock solid (I left Last FM on last night and it was still playing when I woke up).

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved