Ubuntu Networking :: Chipset In HQRP 11N PCI Mini Cards?

Feb 8, 2010

Does anyone know what chipset is used in the HQRP 802.11n PCI mini cards (not express)?

[URL]

I'm looking for a 2 antenna card that does 11N for an older Dell laptop that use mini pci. This is the only one I found, but the chipset is a mystery, and I need to know it before buying it.

View 1 Replies


ADVERTISEMENT

Ubuntu Servers :: Dns Server Started With 2 NIC Cards - Bios Sees Both Cards But - Both Dont Show In Ifconfig

Dec 1, 2010

I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?

View 1 Replies View Related

Ubuntu Networking :: Wireless Chipset Dead ?

Jun 21, 2010

It looks like my laptop's wireless chipset (Broadcom) has/is dying. It won't work anymore on my Lucid install whereas it was working perfectly. The warrenty is long expired.

lspci brings up nothing about it anymore, it once did.

I booted my laptop into Win7 and it no longer finds it either. The manual slider switch on my HP Pavillion dv6000 is in the on position but the light is yellow.

It will very rarely work on Win7 now.

I can't afford a new laptop just now so it looks like I need an external wireless adaptor. I have (open busses) USB, cardbus/54, and a small firewire port. It does not pcmcia or other busses.

Any particular chipsets to look for or avoid?

View 4 Replies View Related

Ubuntu Networking :: RNX-ESYN1 Rt3070 Chipset (install) On 9.10?

Mar 7, 2010

I'm running ubuntu 9.10 and I'm trying to get my RNX-ESYN1 with rt3070 chipset to work. I've tried to download and install the newest drivers from ralink's page and when I type "lsusb" in a terminal I get this "Bus 001 Device 002: ID 148f:3070 Ralink Technology, Corp." so that means if it's plugged in and should work. In the network manager it shows only my PCI broadcom card, but not my USB stick. When I type in the "iwconfig" command I get the "ra0" but not in the network manager.

ra0 RT2870 Wireless ESSID:"" Nickname:""
Mode:Auto Frequency=2.412 GHz
Link Quality=10/100 Signal level:0 dBm Noise level:-143 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

[Code]...

and still nothing changed, I got it to work once, but I reinstalled my system and can't get it to work again. I don't know if I'm doing something wrong. Last time I did it, both of my wifi adapters were showing up in the network manager at once and were working great. I need my Ralink to use with the aircrack which doesn't work with my broadcom.

View 9 Replies View Related

Ubuntu Networking :: 10.10 - Atheros AR5007G WiFi Chipset

Oct 13, 2010

Just moved from Mandriva 2010.1 to Ubuntu 10.10 and am having problems with the wifi. It connects fine, but tends to grind to a halt every now and then. I always have this problem with Ubuntu... hence me migrating to Mandriva in the past. My card uses the Atheros AR5007G Wifi chipset. So, using ndiswrapper, I installed the windows drivers. Everything seemed to go okay. Yet, after a restart, I'm having the same problem. Which makes me think I'm still using the same old driver. So I added blacklist ath_hal and blacklist ath_pci to /etc/modprobe.d/blacklist.conf. Restarted. And I'm still having drop-out problems.

ndiswrapper -l
net5211 : driver installed
device (168C:001D) present (alternate driver: ath5k)

View 1 Replies View Related

Ubuntu Networking :: Broadcom 4318 Chipset Not Supported

Dec 22, 2010

Here is what I have as far as hardware goes:
Compaq Presario V2000
- PROCESSOR: Intel Pentium M 710 -- 1.4 GHz
- RAM 2 GB
- HD 80 GIG
- Duel booting XP Pro with Ultimate Edition 2.8 (I understand this is built from Ubuntu 10.10)
- lspci -vnn | grep 14e4 yields the following:

Code:
03:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)

I have followed to the tee this guidance: [URL]
I tried the installing b43 drivers with internet (using ethernet)
I tried installing off the DVD using the no internet option
I even tried installing the STA drivers even though I know the 4318 chipset is not mentioned as a supported chipset.

All of these were loaded/extracted with no errors via terminal following the guidance to the letter. Now here is a problem I have not read that anyone else has run into. (maybe I just missed it). When I go: System > Administration > Additional Drivers the only additional driver that shows up is "Software Modem". I can't for the life of me figure out why the b43 and STA drivers are not showing up to activate. I can install drivers all day long, if I can't activate them, it really does become a moot point.

View 5 Replies View Related

Ubuntu Networking :: 4309 Chipset Running 10.10 (or Any Derivitive, Really.)?

Feb 27, 2011

I have a Dell Inspiron 9100 that I've been running 10.04 on forever. It has the BCM4309 wireless chipset in it, which worked great. BUT ONLY ON THAT PARTICULAR COPY OF 10.04. When I tried 10.10, Pinguy, Mint, and Fedora I couldn't get the wireless to work again. Finally, that got frustrating, so I reinstalled 10.04 LTS. I don't know if the kernal or the driver changed, but I can no longer get the wireless to work anymore.There's a lot of posts about this particular chipset, and they all seem incomplete. Basically, I am certain that I can get this to work. I just installed Pinguy again, which is 10.10.With the current set-up, my wifi card can see all the networks, but it can't connect. It constantly asks or my password and then connects for a brief second before losing the network again

View 2 Replies View Related

Networking :: Ubuntu 8.10 With Broadcom Chipset Pcmcia Card

Dec 18, 2010

some time ago I installed 8.10 on my x20 thinkpad. I at the time was trying to get it going on a Netgear WG511 v2 card. I was eventually successful in getting it going with ndiswrapper and all has been happy until...

I decided to give my laptop to an elderly friend for his first computer. He is living in a location where (for a variety of reasons) he is sharing a network connection to the internet with a few people. The protocol there WPA2 TKIP (IIRC) and no matter what the bloody thing won't connect. Here at home I run a different setup so its not a big deal

So, I thought I'd try another card to get it going there. I chose a "Aironet" card (badged a Dell 4800 LT) and tried to install this on 8.10

I expected it would install out of the box, but did not "seem to".

I followed the steps on this page, but still it won't connect to my WiFi at home (which I am using to connect to with this x31 thinkpad)

I am using Network Management Applet 0.70 and this works fine with the Netgear card, even showing all the local networks it finds.

When I plug in the Dell card it blinks the activity light and the status light in seemingly meaningful ways, but nothing seems to connect and I find nothing listed in the Network Applet.

I suspect that the OS is discovering the card as when doing an iwconfig I find two entries that would be that card:

eth1 and wifi0

iwlist scan returns:

which makes me think two interfaces are taking the same hardware...

iwconfig returns idential results for eth1 and wifi0

View 2 Replies View Related

Ubuntu Networking :: No Wireless Networks Detected With AR5001 Chipset?

Jun 29, 2010

No wireless networks detected with AR5001 chipset

View 1 Replies View Related

Ubuntu Networking :: Can't Connect Wireless / Ralink 3070 Chipset?

Aug 18, 2010

this is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?

View 2 Replies View Related

Ubuntu Networking :: AR5001 Chipset - Wireless Networking Randomly Loses Connectivity And Can Not Regain Connectivity

Jun 25, 2011

Wife's laptop has AR5001 Wireless Adapter laptop model is Toshiba Satellite A215

Problem : Wireless networking randomly loses connectivity and can not regain connectivity, the only apparent solution is a full power down , this is not even certain to work. The card works under Windows, she hates Windows. (I love her for this) I know it's not faulty hardware , because it will work for days on end under Windows without problems.

Things I've tried : madwifi drivers (any and all versions available) : These increase stability of the signal and seem to delay the inevitable however it still happens. When using these drivers the only option is to unload them modprobe -r then reboot then remove them again and re add them. It makes no sense why this works, and if I don't remove them prior to rebooting it will not work.

ATH5K drivers : These are pretty much junk, results are unpredictable at best, sometimes it will work perfectly for a few hours, sometimes it will not work at all. Nothing is repeatable, I can't seem to force whatever condition is causing this. rfkill does not show the wifi being blocked (hard or soft), unblocking it anyway does nothing, only way to make this work and it's iffy is to fully power down wait 5-10 minutes turn it back on and it MAY decide to work.

Firmware update : Updated the Toshiba BIOS to the latest version of the firmware 2.0 no joy here either. Same issue both sets of drivers.

Tried different distros and kernels : I've tried Mint 9, 10 ,11 ; Ubuntu 10.10, 10.04 , 9.10 and 11.04 (which is currently installed) , Fedora and OpenSUSE. All are giving the same problems. I have also tried a slew of different kernels no joy from any of them (I'm not at the computer with the issue now I will post exactly what kernel versions I've used when I have access to the machine).

Another useful bit of information, the hard switch to disable/enable wifi WILL disable it but turning it back on does absolutely nothing. The hotkey does nothing at all. The bios does not have an option to disable or enable the wireless card.

I will also post the typical lsmod , lspci , iwconfig all that good stuff when I get back to the computer in question. I'm probably just going to buy a PC card for it and give up on that one, but this is driving me insane and I would really like to see it resolved even if I do replace the hardware.

View 3 Replies View Related

Ubuntu Networking :: Unable To Connect To Sitecom Wl-181, Chipset Ralink Rt2800 802.11n Pci

Aug 20, 2010

Unable to connect to wireless network at home. The wireless network is visible. Password is requested. But no connection established.

hardware:
desktop, ubuntu 10.04
PCI card: sitecom wireless nework cardbus card 300N
chipset: ralink RT2800 802.11n PCI
iwconfig wlan0: RT2860 wireless, nickname: rt2860sta

I tried using ndiswrapper. Conclusion: 'driver already installed'.

The wireless network does connect on my laptop with ubuntu 10.04 installed. Distance to modem: 3 feet.

View 2 Replies View Related

Ubuntu Networking :: AR5523 Chipset TP Link TL-WN620G Driver On 11.04 Desktop 32 Bit?

Aug 17, 2011

Ubuntu users and developers. I am newbie in here. I need help. I was trying to install driver for TP Link TL-WN620G wireless adapter. On my pc installed ubuntu 11.04 32 bit desktop edition. I tried this steps But it doesnt work

1) I tried all in this page but it doesn't work. The adapter is not flashing.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: DGE-530T With Marvell Yukon 88E8001 Chipset Driver Patch?

Jan 23, 2010

I was wondering if anybody can help me telling me where i could get a driver to patch my DGE-530T with a Marvell Yukon 88E8001 chipset so that i can use aircrack-ng. My OS is Ubuntu 9.10 and I am running it on an HP Pavilion dv7 1020us

View 2 Replies View Related

Ubuntu Networking :: Intel Mobile Chipset 4 Series / 10.04 / HP DV6-1030us (Wireless Connection)?

May 3, 2010

Noob to Ubuntu here and I cannot access my wireless connection. It is working fine right now (wired) but I am using the TV stand as my computer desk right now so... not very practical. I tried following the "howto post a wireless issue (ticket)" but there was too much information for me to be able to put on here.

I have my SSID and my WEP. I am on Verizon DSL (only provider in my area). I tried using the wireless setting in network connections and I tried using DSL. I assumed that SSID+Password=Yay the internet works! but apparently not.

View 2 Replies View Related

Ubuntu Networking :: Not Working: Zonet ZEW1642D (Ralink Rt3062 Chipset) In Studio

Oct 29, 2010

other forums to get my Zonet ZEW1642D to work on my new install of Ubuntu Studio 10.10. None of the how-tos I've found APPEAR to have worked although I guess I'm not entirely sure how I would know. There is a pair of computers at the top right of my screen by the date/time. When I right click there the following are all checked:

Enable Networking
Enable Wireless
Enable Notifications

but when I click Connection Information Auto eth0 is the only connection that comes up (which must be the wired connection I'm using to submit this) Here are the things I've tried:

1) README_STA included in the driver files downloaded from the Ralink website although I must admit this was a bit over my head
2) http://ubuntuforums.org/showthread.php?t=1045703
3) http://www.hyperborea.org/journal/20...i-ralink-3062/

[Code]....

View 9 Replies View Related

Ubuntu Networking :: Edimax EW-7128g Wireless PCI Not Working With Ralink RT2561/RT61 Chipset

Sep 5, 2010

Just installed Ubuntu Studio 10.04 and everything seems to be working nicely except I have no networking.

The card does not appear in the Network Settings GUI. The only 3 tabs I have are General, DNS, and Hosts.

A screen grab is attached.

I'm a long time Windows user trying out some of the best Linux creative apps I can find. So, Ubuntu Studio was a no brainer. I checked the manufacturer's site for linux drivers and they are available, but I don't know how current. (Edimax site, not RaLink's site.) I opened the file and it looks like it needs to be compiled and installed to work. Something I know almost nothing about. The card is listed as supported in this forum for Ubuntu 9x but I can't find information about it for 10.04

PS. I have no networking on the system but I can transfer files via USB flash drives if needed.

Some System info:

Code:

1 ) Machine Brand and Model (PC/Laptop): Dell Precision 650

2 ) Wireless Brand, Model and Wireless Chipset: 03:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI

3 ) check interface: robert@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1

[Code].....

View 1 Replies View Related

Ubuntu Networking :: Alfa Network AWUS036H USB Adapter Chipset Realtek 8187L Disconnects

Sep 13, 2010

I have Ubuntu 10.04 (32 bits) and a wireless usb adaptor Alfa Network AWUS036H with Chipset Realtek 8187L. After a few minutes connected, the adaptor disconnects and I can't reconnect again. I search this forum but I'm not sure about what to do. Do I need to get and install another driver? I need to use the windows driver?

View 5 Replies View Related

Ubuntu Networking :: Using 4 NIC Cards?

Jul 13, 2011

I am setting up a class using a vmWare ESX server. Because of security proceedures, the students are not allowed to connect directly to the internet. Because of file space, the are severated on 3 servers. I am trying to set up a server that connects to the internet and all 3 subnets that the students are on.

I have configure 4 virtual NICs 1 with DHCP connected to the internet. The other 3 goes to each student network. I can get 2 working at a time. 1 using the DHCP and 1 of the other networks. It seems to be order dependent. On the main server I can ping the local address. When I ping the students systems, I can reach 1 but not the other 2. I get a host unreachable message.

Is there a limitation to 2 NICS. If not, is there any magic incantation to run the 4 nics?

View 4 Replies View Related

Fedora Networking :: Broadcom 4321 Chipset Not Working - Wlan0 Never Shows Up

Jul 3, 2010

I am still encountering problems getting the Broadcom 4321 chipset to work on my Fedora 13, even after using this guide, this guide and another guide on ndiswrapper.

To answer the standard questions:

Code:

Code:

Code:

Code:

and finally

Code:

But no wlan device or anything else.

View 2 Replies View Related

Ubuntu Networking :: Wireless Not Working On Hp Mini?

Feb 27, 2010

I loaded Ubuntu on my mini and everything worked fine except it didn't recognize my wireless card in my HP 210 mini.

View 2 Replies View Related

Ubuntu Networking :: Eth0 On Mini 10 Not Functioning?

Apr 29, 2010

I installed the netbook remix of 9.10 on a Dell mini10. (Dual boot with XP) I knew that I would have to install the broadcom drivers to get the wireless up and running. What I didn't anticipate is that the eth0 interface would not work. ifconfig shows the device and lists the ip as a 192.xxx number. I am wired directly into our network, and expect an IP in the 10.10.etc range. Pings either return a host unreachable message or say network unreachable. This problem persists even if I set the card to a known good IP. ifdown eth0 returns a message that the interface is not configured. ifup returns a message that it is ignoring the interface.After fighting that problem for a while, I re-installed, thinking that perhaps something had gotten fouled up in the installation process. The problem persists. Nothing has changed.

View 9 Replies View Related

Ubuntu Networking :: Wireless On HP Mini 1030NR

May 25, 2010

I've read about all of the problems with the HP Mini's wireless and the Broadcom drivers. Running 10.04 LTS.
Code:
lspci -vnn | grep 14e4
01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)

I have 2 drivers available to me under restricted hardware:
Broadcom B43 wireless driver
Broadcom STA wireless driver

I can get the B43 to connect and work, but not for more than a minute or so at a time. I see the following in the kernel log after the wifi adapter is activated:
Code:
May 25 09:16:18 jon-netbook kernel: [ 121.825109] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
May 25 09:16:18 jon-netbook kernel: [ 121.825125] b43-phy0: Controller RESET (DMA error) ...
May 25 09:16:18 jon-netbook kernel: [ 122.044148] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 25 09:16:24 jon-netbook kernel: [ 127.566143] b43-phy0: Controller restarted
May 25 09:16:24 jon-netbook kernel: [ 127.577378] b43-phy0: Controller RESET (DMA error) ...
May 25 09:16:24 jon-netbook kernel: [ 127.796682] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 25 09:16:30 jon-netbook kernel: [ 133.333043] b43-phy0: Controller restarted
May 25 09:16:30 jon-netbook kernel: [ 133.333093] b43-phy0: Controller RESET (DMA error) ...
May 25 09:16:30 jon-netbook kernel: [ 133.552336] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
May 25 09:16:35 jon-netbook kernel: [ 139.069058] b43-phy0: Controller restarted
May 25 09:16:35 jon-netbook kernel: [ 139.069078] Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000

View 3 Replies View Related

Ubuntu Networking :: Connecting To Wireless - UNR 10.4 On HP Mini 210

Jun 1, 2010

just installed Ubuntu Netbook Remix on my new HP Mini 210 (info). Everything is working fine -- webcam, shortcut keys etc, but I'm having some difficulties connecting to our wireless network. When I click on the network panel item, there are no networks visible. Now, I also have Windows 7 Starter on the netbook (what I'm using right now) and that's able to connect to the network fine.

View 2 Replies View Related

Ubuntu Networking :: HP Mini 110 Broadcom Wireless?

Oct 23, 2010

I installed Ubuntu Netbook on my windows xp machine, a HP Mini 110 with a broadcom wireless card, I installed using Wubi. The wireless on the ubuntu side isn't working and I can't plug into a physical line, how do I fix this?

View 3 Replies View Related

Ubuntu Networking :: Can't Use Wireless (HP Mini 1151nr)

Nov 29, 2010

I want to start off with this: I installed Ubuntu on my HP Mini 1151nr, and it went well. But after installation, the only way I can connect to internet is by directly hooking up to my modem. My wireless is disabled, and I do not think that I have the drivers for it.

The "Additional Drivers" found two Broadcom 802.11b/g drivers, but when I downloaded it came up with errors and didn't work.

View 4 Replies View Related

Ubuntu Networking :: Connecting To Wifi With A HP Mini?

Dec 30, 2010

I'm using a HP mini netbook, and I recently installed Ubuntu on it. I updated and did the whole proprietary drivers activation and it now scans and sees networks but I am having trouble actually using them now. It says that it is connected to a wireless network but it never loads any pages.

View 7 Replies View Related

Networking :: Ubuntu 10.04 Wireless For Dell Mini - Gets IP But No Dns?

Jul 20, 2010

I wiped and loaded my mini. ran the ubuntu 10.04.. had to run hardware drivers twice to finally get reference to broadcom and then wireless came on!! Hurray! however (yes, dhcp).. no dns on wireless but on eth0 no problem everything shows up ip, dns.. works fine.. go to wireless it connects, gets ip but in connection information no dns servers listed

View 4 Replies View Related

Fedora Networking :: Get A Second Computer Up Using The WUSB54G Network Adapter Chipset 1915:2234?

Sep 26, 2009

I have only been using Fedora for a month. I am trying to get a second computer up using the WUSB54G network adapter chipset 1915:2234. But the NetworkManager does not recognize it and it does not come up in the list of adapters when I try to add it.

View 8 Replies View Related

Fedora Networking :: F15 - Configuring Wifi Card - Edimax EW-7612PIn With RTL8192SE Chipset

Aug 15, 2011

I have just installed an Edimax EW-7612PIn PCI-E Wifi card which has an RTL8192SE chipset. This chipset is not supported under current F15 kernels so I have installed the driver and firmware from source and have that working fine. The driver can see the card and I can issue 'iwconfig' commands successfully enough to see my Wifi network.

The problem I have is that I don't understand the relationship between iwconfig and wpa_supplicatant and as I'm running a headless F15 server I cannot use the NetworkManager GUI to help me. I should also note that the Wifi network is using WPA2-Personal encryption.

This is what I have done:

Configured /etc/sysconfig/network-scripts/ifcfg-wlan0 with what I think are reasonable values (based on google searches), including the ESSID, TYPE as Wireless, etc.

Configured /etc/wpa_supplicant/wpa_supplicant.conf, including using the key value returned from wpa_passphrase.

Arranged for wpa_supplicant to run from boot, using chkconfig.

However when I run 'ifconfig wlan0 up' I get the error message 'link is not ready' and indeed looking at the output from 'iwconfig wlan0' there are no configured values. I also understand that some values are configured by iwconfig and others by wpa_supplicant, however it's not clear what.

How do I permanently set iwconfig values?

How do I configure wpa_supplicant?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved