Ubuntu Networking :: Can't Connect To My Wireless Connection?
Nov 27, 2010
I upgraded to 10.10 and have everything setup, installed my wifi card fine with ndiswrapper so I can connect to my neighbors which isn't protected but mine is. Everytime I try to connect it will ask for the WEP so I put it in, it tries connecting then ask for the WEP again then repeats over and over....does 10.10 not like WEP connections? I don't know what to do.
I've been using this network forever With windows and I can't figure out how to connect to it now with ubuntu...I have a build-in wireless card and I know the name/password of the connection, but my computer cannot seem to locate it. I've looked through guides and none of them work..
Using an old (5 year) laptop with XP loaded I installed wubi to save altering partitions etc. It all downloaded fine and connected to the internet by wire. I set up the wireless connection using WPA but could not connect. The wirelsss card does see my network and others. After lurking around the forum and trying various things I found that I could connect without encryption. The more I read the more I became confused. Anyway what I could glean about my Wireless Card it is a Intersil Prism2 mini usb adapter - but also shows up as an Acer ?? Warplink 802.11.
Using lshw I found this reference to wireless
I became even more confused and got a bit lost using the various codes in the terminal and looking up things about drivers etc but would like to persist.
i just installed the 10.0.4 version. My problem is that I cant connect to the internet. When I add a new wireless connection, it says that its connected but i cant ping the router or connect to any websites. It keeps auto assigning me with a 10.42.43.1 ip which doesn't make any since because my router's is nowhere close to that.
I ve just install ubuntu 10.10 and am unable to connect to wireless connect. I was able to connect on the try ubuntu before install option. I have dual booted Windows 7 and Ubuntu 10.10. I have tried connecting without the WEP key and still no luck. Just found it strange that connect on try it but not after full install.
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
I have installed the driver of my Broadcom Wireless card BCM4312 ( Acer extenza 5620 laptop) and when i try to connect to my wireless connection it just try to connect for a while and then go offline i tested another usb wireless card and still no success
I have been running Meerkat in its various forms for the last few weeks. Wireless connection has not been a problem at all. I rebooted about 15 mins ago and on restarting the wireless connection will not connect. I checked to see what the problem was and clicked on Edit Connections and on the wireless tab.
My wireless is set to auto and its name is SKY 24550. I now have 2 entries in the same name and the one that is trying to connect is asking for wep 128 bit security details to be entered. My connection used WPA&WPA2 personal.
Ok, I thought I'll delete the new one (with the different security setting) and try again.
No good, it still asks for the same security details.
So I go back into edit connections and the new one is back again! I can't get rid of it, and while it's there the one that should connect isn't getting the chance.
Fortunately ethernet is working ok and I also have a Natty install which also connects ok through the old wireless connection, but not in Maverick.
10.04 in a couple of identical lenovo laptops (of friends) suddenly have stopped connecting successfully to wireless, coinciding approximately with a mains power socket fail at the modem router, now fixed. presumably the machines were trying to connect to the access point, which may or may not have been working, but themodem router was not. Now, internet connection and wireless access point is fixed ok and is back up, and i can connect wirelessly to the access point ok using an eeepc with 10.04.2 with no problem so the access point is working ok
the target laptop/s are still ok via wired ethernet, and can *also* connect to a neighbours open wireless (a british telecom so called fon network, it asks for an account password), and all local wireless networks can be seen normally, and the home access point ssid can also be seen ok. so the aptop wireless is connecting ok, but not to this particular access point now. maybe someting has got screwed up? it is wpa2 and when clicked, after a long-ish time, the authentication is requested, then given, correctly, and still not connecting, asks for authentication again etc etc. no local secure wallet is being used.
when upgrading these laptops for my friend some time ago from 9.04 i have a small recall that 10.04 had a odd thing with wireless authentication (?) bug? i have deleted the network connections gui listing for this ssid and restarted the laptop, still no joy.
I've been at this the last 3 hours now or so. I am not a very good with Linux, I am fine with all other areas. I have this laptop, with a Intel Pro 2200BG card. The idea was to install a lxde lightwieght on it and use PCLINUXOS, because its "easy". This computer is for internet browsing and thats it. Under the Network Center -- I can see all networks, including neighbours. When I try to connect to my router via Wireless, I get connection failed over and over.
I then tried doing all the following: Changing the router from WEP to, WPA, WPA2 personal, WPA2 Enterprise Changing the SSID, broadcasting to ON, changing the SSID name I've used various different passwords, and reset the router now about 50 times. I am connecting to my Router (as Ive changed the SSID and noticed it picks up the new name). (Yes I can see the correct MAC addreess). Yes I am on the right channel, all good here.
My Nintendo DS is connecting fine with all the changed settings now. The wireless card worked fine under Windows XP (However I just removed the operating system since I really had no need for it). I've tried every other mode, it works wired. Like I had explained above, I downloaded a what I thought was an easy verison (distro), I was really hoping to get away from the crazy windows life with crazy errors and instability.
I did try enabling display log, and doing it manually by adding a connection, etc. The log tells me about as less would a windows event log: it says Problems occurred during the network connectivity test This can be caused by invalid network config or problems w/ your momde / router Reluanch, etc.
I can connect to the internet fine with wvdial and wvdialconf; heck I am even posting from my PCLinuxOS FM Distro. I want to setup an ethernet connection between two PC's, one running PCLOS 2010.11 FullMonty and the other Knoppix 6.2.0. Knoppix is fine and setting up a connection is simple but with PCLOS I have been having many problems trying to set it up. I tried using the drakconnect tool but it did not work. I tried assigning it a static IP Address but the other PC would still not pick it up and to to it all I keep getting the same error message about problems during the network connectivity test!
I have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.
I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"
I'm using Ubuntu 10.10 (Maverick Meerkat) on my HP laptop. My office desktop uses Windows 7 Home Edition. I created an adhoc connection on my desktop pc because I also want have an internet connection on my laptop. But Ubuntu seems do not detected the adhoc I created on my pc. I also tried to connect using the hidden wireless network and entering all the necessary access (wep key, etc...) but still didn't work. Is there any way that I could connect my Ubuntu on a adhoc? Is that possible?
My laptop has been working fine with ubuntu 10.04, and earlier today it shut down after running out of battery. I came to use itr and discovered that the wifi icon had disappeared from the panel bar, and it won't connect to the wireless networkor via a wired connection.I have had a play around with this, tried ping -c5 google.comresult was:ping: unknown host google.comand ping -c5 220.127.116.11result: onnect:etwork is unreachable.I have other computers connecting to this network and know that it is working fine.
I'm having some problems with my wireless connection. I'm on Ubuntu 10.04, on a HP ProBook 4520s, with a RaLink RT3090 wireless network card. I installed the drivers (hopefully correctly), the wireless seems to work correctly, it scans and finds networks, but when I try to connect to one, it times out after some time, while still attempting to connect. I also have a wired connection that works correctly and without problems. Other computers that try to connect to said wireless network manage to do so without any problems, so this has left me a bit baffled, since, like I said, everything seems to be in order.
I'm a new Ubuntu user, so please tell me what other information I need to provide in order to easily and successfully facilitate troubleshooting this, because it is, as you can imagine, quite aggravating, having a laptop that needs to be connected to the internet through a cable.
My computer takes a while to connect to my Linksys N router.
It used to connect in a snap of your finger automatically.
Now it does not.
Yes I have tried manual configuration, and double checking the password, ssid, protocols, and security type.
WPA2 personal is the security type.
There are maybe 4 different ways I know how to connect. The most annoying thing is when this box pops up saying to type in a password for the network connection.. and keeps popping up even when everything is right.
All I need is a reliable, easy, and automatic program to connect me to the internet, maybe even before I log into my system.
Linux Ubuntu 8.04 LTS Desktop Edition is my system. Brilliant system.
I have been having trouble with Ubuntu 11.04 when connecting to the Internet via Wireless Networking. It will connect, and has good speed once it connects, however it takes upward of 10 minutes and over 20 times of me clicking 'Connect'.
Is there a way to connect to a wireless network quicker? My network is unsecured and without a keyring. It is not only slow connecting to my network, but the network of other's.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
how to edit the wireless connection setup? i know how to do it in the wired network but don't know in this case..can anybody please tell me the step by step procedure...i have searched for this.seen some videos on ..... but nothing goes well...
I have been fiddling around with getting my printer (HP Officejet 6500 Wireless All-in-one Printer - e709n) connected to laptop (Toshiba Satellite L455D) for nearly a month. I am running Ubuntu 10.04. I have never been able to successfully connect it using the ad hoc but the printer always worked using a USB connection. It is a shame because this may be the only thing preventing me from going all Linux.
I have just installed Ubuntu 10.04 on my HP Pavilion dv5. My laptop has a Broadcom 4312 wireless adapter. The driver for the adapter was installed by Ubuntu as a proprietary driver. The wireless light is on and I can see the available networks, but I am unable to connect to my network. The correct authorization is set(WPA/WPA2) and I have entered the passphrase correctly.
I am able to connect to the wireless network successfully from my Windows login(that is how I confirmed that the passphrase is accurate). The network shows that it is trying to connect, but the wireless authentication dialog(asking for the passphrase) keeps popping up. Incidentally, the same thing happened when I tried openSuSe and Fedora on a spare laptop. The windows systems can connect, but not the Linux systems.
I would like some help setting up using a wireless connection. I can connect using wired connection, and I have no trouble browsing. I have a strong wireless connection as well; however, when I try to browse I get a server not found error. I did download the necessary drivers. Before that, I didn't have a wireless connection. I was able to connect on this pc before the install, and all other devices still connect using wireless. I have a linksys router.
The one thing that stands out at me is the ip address that it says the wireless connection is using. It says it is 10.42.43.1 I feel like that might be problematic because I'm pretty sure my router only accepts connections with values that are between 192.168.1.100 and 192.168.1.200.
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
I'm able to configure my Wireless network to connect with an AP with WEP key but...
Now I'm at home, I've a WPA2 key (my router now is supporting both, WPA and WPA2). I used WICD to connect but no success at all! It just stops with "Connection failed: Could not contact the wireless access point"
if I type IWLIST key:
Code: ra0 2 key sizes: 40, 104bits 4 keys available : off : off : off : off code....
My laptop receives all the wireless networks but when I am trying to connect to some protected connection (with right password) it just doesn't connect. How to fix that?I using OpenSuse 11.3 gnome 32bit. Dell Wireless 1397 WLAN Min-Card.
Tried to connect to my wireless connection (COMCAST wireless router) and while my card was detected, I couldn't use it ('Network' didn't look for any wireless connections). Manually set up a connection with SSID etc. didn't work. My card's a 3COM with NIC (or w/e) of 3C59x.
I downloaded the driver in patch form, but could not patch (command not found). Well, no internet, so I was wondering how I might get the metapackage base-devel, which should enable this command? Icidentally, I can't use gcc or anything either, so I'm not sure if I can build anything from source..
I have just setup Ubuntu on my Dell Laptop a Lattitude C640 with a 3Com 3c905C Tornado Wifi Card. Well the wired and wireless do not work. They try to connect then bang no connection. I would be able to make some headway I think but I have no basic skills with Ubuntu. I have mastered how to get info from the terminal but how the heck to you edit a file? How do you get to that stage?