Ubuntu Networking :: Cable Modem Networking - Can't Connect To Each Other On The Home Network
Feb 14, 2010
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies
ADVERTISEMENT
May 4, 2011
I am using a cable modem wired to my PC via ethernet. My ISP is Road Runner, through Time Warner Cable.
I entered my IP address, Netmask, and DNS Servers into the network, not using DHCP. This was how I was able to achieve a network connection.
I am connected to the modem, but I cannot get internet.
Here are my stats:
View 7 Replies
View Related
Jul 9, 2011
I cannot connect my Dell Inspiron 1300 through the NetworkManager "wired" connection, when I try to go direct to the cable modem. It fails to connect.
If I connect the cable modem to my (linksys WRT54GS) wireless router, and then connect my laptop to a wired port in the router, it connects in seconds, successfully.
This has happened to me 2 other times, when I tried to connect my laptop to a client's cable modem, because my client did not have a wireless router available, in their home.
My wireless works fine. This has me perplexed. I'm using Ubuntu 10.04 LTS and NetworkManager Applet 0.8
I've tried some things to see what is going on, such as "ifconfig" "dhclient" as well as modifying the "Auto eth0" parameters and adding my laptop's MAC address, etc. Results were no fix or solution. I feel like I'm headed down the wrong road. Would someone set me straight? I have a feeling this is simpler than I think.
Do I have to actually reset my own or someone's cable modem to get this to work? I don't want to do that unless there's no other way. Is there? Let me know what commands I can or should run.
View 1 Replies
View Related
Jan 17, 2010
I have fedora 12 installed in my laptop. Can anyone plz tell me how to connect nokia E51's modem ( via. Data Cable) to access GPRS !
View 2 Replies
View Related
Sep 19, 2009
My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies
View Related
Jul 30, 2010
I am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
Here's some info up front code...
View 17 Replies
View Related
Feb 9, 2010
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies
View Related
Apr 26, 2010
Linux box could act as a router? I have one machine running ubuntu, another running windows 7, a cable modem and a switch. Is it posible to share the connection between both computers by making the linux box a "router"?
View 7 Replies
View Related
Jun 23, 2010
I am using ububntu 9.10,and have a cable modem internet connection. All I have is an ethernet cable given to me,and when plugged in a windows machine and fire a browser am redirected to default login page where i can login, but when i plug it into my linux machine,i cant get the same done. In network connections it doesnt shows my autoeth0, i have deleted my existing dsl settings(not autoeth0),made a new wired network,i doubt what should i put into MAC addrs field(i have put my machines mac given by lshw -c network.) What should I put in DHCP client id? Anyways when i click on network connections it says under my wired connections-device not configured properly.
View 6 Replies
View Related
Jan 5, 2010
I am still building my home network, and want it o be able to connect to different computers by:
\pc-name
We have 2 types of computers:
Computers in the workgroup WORKGROUP (2 debian, 1 vista)
Computers in the domain TUE (required by our university) (3 vista, 2 xp)
Within the workgroup, I can call pc's by their name, but this is not possible by the pc's in the domain. I can however always do \ip and the 2 debians have a samba server running, which is available through \ip (and \name, for the computers in the workgroup).
View 5 Replies
View Related
Mar 28, 2011
I am writing a simple script which will transmit files over a serial connection. I have simplified the setup to test the solution, so the final configuration will be a bit more complicated.
Current setup:
1. 2 RS232 com ports connected with a null modem in between.
2. Open minicom on both
3. Put in 19200,8,N,1 as parameters
4. Open text travels both ways
5. Files sent over Zmodem transfer well.
Both serial adapters are USB, but I tried it also with real com ports, and same story. For simplicity, I will call one adapter "receiving" and the other "sending" to signify from which side I want to send the files through zmodem.
Then I close minicom on the "sending" site without reseting the port (I have also tried setting everything up with stty)
On sending site:
Code:
I tried googling but no solution helps. Please do not try to suggest to use minicom on both sides, because this is going to be an unattended process in the end.
How to transfer a file with zmodem using rz and sz without minicom.
View 2 Replies
View Related
Jan 3, 2010
Ubuntu and Xubuntu read my Motorola Surfboard SBV5120 cable modem via USB "out of the box"; Puppy LInux doesn't. The computer I've run them on doesn't support ethernet, so it has to be via USB. what can I do to get Puppy online?
Computer: Systemax
Processor: AMD athlon
Memory: 189 Mb
Hard drive: 40 Gb
View 1 Replies
View Related
Nov 1, 2010
why my VCN will not allow me to connect from my phone outside of my home network... When I do open up remote desktop it changes what it says... one day it says only available through Name.Local and then the other day it shows the IP address and says over the local network. I have tried going into gconf-editor and messing around but it still doesn't seem to work.. I'm not entirely sure how to mess around with my router.. and if that is necessary..
View 5 Replies
View Related
Apr 14, 2010
I have a network that consists of a few desktop machines, laptops, and two Internet connected linux servers. The Linux servers are the gateways, routers, and firewalls for my desktop and laptop machines.Whenever I'm away from home; I can connect to my home machines over the Internet by first ssh'ng (technically I use Webmin; because my firewall on each Linux servers blocks ssh from the Internet.) to one of the linux servers and then ssh'ng to the desired machine on my home network.
This works fine for my home linux machines. But not my Windows machines.I'd like to be able to rdp or rdesktop to my Windows machines.Will OpenVPN allow me to accomplish this ?
View 14 Replies
View Related
Mar 12, 2009
I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
View 10 Replies
View Related
Jan 14, 2010
I have a home network of 4 computers - 3 Windows & 1 Xubuntu I'm able to connect to the Xubuntu machine from all of the Windows computers, but I can't do the opposite - connect to the Windows machines from the Xubuntu. I'm using Gigolo, and I can see the network, but it says no servers found.
View 5 Replies
View Related
Jan 17, 2010
I am trying to connect to my home network which is wpapsk when i click on the networking item in the tool bar at the top it shows my network and when i click on it to join the network it asks my for my security and it only lists wep 40/128-bit key or wep 128 bit phrase or leap?? or dynamic wep(802.1x)
there is no choice for wpa. but when i set up a new network or attempt to edit the network listed under wireless i can see wpa but the system does not connect i have tried looking around for info all with instructions on "enabling" wpa by using wpasupplicant which is there but nothing happens in fact when i try the code sudo gedit /etc/network/interfaces i get command not found which in all the techniques i have tried require this line.
View 9 Replies
View Related
Jan 22, 2011
I got my netbook in the mail yesterday, opened it up, logged in, and Windows 7 was installed. Being a Windows hater my whole life, I followed a friend's advice and downloaded Ubuntu netbook, made a USB drive, changed the BIOS settings, all that. Here's when the stupidity occurs--I decided to go ahead and install Ubuntu without trying it, and to delete Windows to do so. A couple minutes later I realized that was a really, really stupid idea, so in a panic I turned my netbook off. I turned it back on and it was still on install but not really moving, so I powered off and on again and went back to the "Try Ubuntu" or "Install Ubuntu" choice screen. I chose "Try Ubuntu" and found that it did not recognize my home wifi network or ask me to join--or any wifi network, for that matter.
Now, it did recognize my wifi network the few minutes I spent on Windows 7, so I tried to change the BIOS settings back to where I could just use that until I figured out the problem. But no matter which setting I tried (HDD/SDD just gives me a black screen, and FDD and LAN do the same as the USB drive), I can't get back to Windows, so I guess I did delete it. Which leaves me with a netbook that can only connect to the internet via ethernet cable. Which kind of defeats the purpose.
Questions I should answer:
1. How am I trying to get online? My home's wireless network. We have a router. All the other laptops in the house connect fine.
2. Who is my internet service provider (and in which country?) COX, United States.
3. Can you get online with any other method? Yes, the internet works fine with an ethernet cable.
4. How am I getting online to post in this forum? My parent's laptop.
5. What hardware are you using? Toshiba N505 netbook and a router. I can give more information about the router if you need it, but I doubt it's the program since the other laptops are fine.
Give me one moment and I will add some code that it gives me when I put in the commands this website tells me to.My two final questions are:
1. Is there any way to recover Windows without buying it again?
2. How can I get Ubuntu to connect to my home wifi network?
EDIT: Here's some code. I have no idea what it means, but hopefully you do.
To run a command as administrator (user "root"), use "sudo <command>".See "man sudo_root" for details.
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller[code]......
View 1 Replies
View Related
Aug 6, 2010
i'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
View 2 Replies
View Related
Dec 12, 2010
Running 2.6.29-gentoo-r1 on a Sun Ultrasparc 10 with a Sun Happy Meal on eth0 connected directly to my cable modem. Intermittently, with a frequency between a few hours and a few days, I lose internet connectivity. Running ifconfig eth0 indicates all is well and I have a valid IP address but I cannot even ping the cable modem's management address; pings to 127.0.0.1 and eth0's IP address do get a reply but no other address I've tried does. I can 'fix' the problem by issuing
Code:
If I check the CM logs, it appears that it has rebooted itself prior to the loss of connectivity. The strange thing is that the incoming traffic doesn't seem to be affected by this, my PSAD log is full of incoming scans even during the periods when I can't connect to the net. I suspect this is an ISP problem (they own the CM);
View 2 Replies
View Related
Jan 24, 2011
Running Gentoo with kernel 2.6.29 on a Sparc Ultra 10. I'm having problems with my cable modem connection failing, so I've added a static route that enables me to log into the modem's diagnostics page at 192.168.100.1 when the connection drops; my /etc/conf.d/net looks like this (with the comment lines removed).
Code:
dns_domain_lo="MYNETWORK"
config_eth1=("192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255")
config_eth0=("dhcp")
routes_eth0=(
"192.168.100.1/32 via 0.0.0.0"
) dhcpcd_eth0="-N"
This works but after a period of several hours to several days, this static route disappears from the routing table.
View 1 Replies
View Related
Apr 1, 2009
Since I installed fedora on my desktop (there is no other OS on my desktop computer at the moment) I can't connect to my laptop which has Windows XP installed on it, although I can normally connect to internet from both computers. Here is the drawing to illustrate how everything is connected:
On the picture you can see that the phone line goes to the ADSL modem. The ADSL modem is connected to the Wireless modem with LAN cable. Wireless modem is connected to my desktop computer with LAN cable, and trough the wireless connection to the laptop. Internet is working fine for both computers, but desktop can't see laptop and vice versa. What do I need to do in order to see the laptop?
View 1 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Aug 9, 2010
I have one pc on which I have installed slackware and samba (fixed IP, mask 255.255.255.0) I have another PC (also XP) which also has fixed IP running XP, and I can connect that to the slackware server easily My third PC connects to the internet and gets its IP address from the Cisco router(?) that provides the IP and mask on boot up.
I tried changing the IP and Mask on the slackware server to match the internet PC (which uses a mask 255.255.254.0) but the PC mask and IP changed on the internet PC I want the PC that connects to the internet to also be able to connect to the slackware server, but I see no need for the slackware server to also connect to the internet - I will mainly use it as a file server When I worked for another company I think the IT department talked about having 2 network cards in the PC that connects to the internet
View 6 Replies
View Related
Aug 6, 2010
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies
View Related
Apr 3, 2010
I'm trying to setup OpenVPN in order to connect back to my home network while traveling for secure browsing and such. However, before I can even start trying to set that up I tried to see if I could open port check my computer through the net. And I'm having a hard time doing that.
As far as I can tell, here are my roadblocks:
1. Is ISP (Qwest) blocking my ports?
2. Is my modem doing the proper port forwarding and firewall?
3. Is my router doing the same?
4. Is my firewall on the computer allowing the request?
To minimize sources of error, I've turned off my local and router firewall and setup my router to forward ports. I'm not to familiar with my modem, but I'm pretty sure that the firewall is turned off by default and I think I've done port-forwarding correctly. But still no success when doing an open port check. At this point I don't know how to diagnose the problem.
View 2 Replies
View Related
May 1, 2010
I'm having trouble connecting to the internet... I'm using Ubuntu 10.04 on a PC with Windows XP installed. When I click the little network icon at the top there's an option called "auto eth1" but when I click it, it just says
"Wired Connection: Disconnected - you are now offline."
View 8 Replies
View Related
Dec 21, 2010
How can connect two PCs that both of them have ubuntu by cross cable?
View 4 Replies
View Related
Nov 13, 2010
I got a new cable modem so I could get rid of the one I've been leasing from the cable company. It is a Motorola sb6120. Everything is fine with the ISP, it's approved for operation on their network, the only hitch was I had to use my Windows laptop to run their activation software.
At any rate, with the new modem installed, I hop on my Linux box and go to work. I'm seeing some terrible delays in looking up names. When I look with firebug, all the dns lookups for new names are taking 15+ seconds. First I just think maybe the names aren't cached or something is weird for a minute and it will get better, but no. After several restarts and then a couple days persevering with the new cable modem, all DNS queries are still terribly slow (including zypper, mail client, web client).
Suddenly I remember an issue I was having with, I believe version 11.1 when I first installed it. For just the computer on my network with a fixed IP address, DNS resolution was slow like this and if I disabled IPv6 then all was well. I believe there was even a patch issued back then for gethostbyname() that was supposed to fix the issue? So, when I disable IPv6, DNS lookup is back to normal. The two Linux computers on my network had been working fine with IPv6 and the old modem, though, and the Windows box is still working fine even with the new modem.
I can disable IPv6 and make it fast again, but really why should I have to?
View 6 Replies
View Related
Jul 13, 2011
I am using Ubuntu Server version 10.4, and am trying to connect to the internet via an ethernet cable. This may and probably is incredibly simple, however, I could not find anything that pertains to it.
View 9 Replies
View Related
