Ubuntu Networking :: Broadcom Wireless Doesn't Work

May 20, 2010

I'm working on Lucid, in HP Pavilion 9730us laptop.

My wireless broadcom card was working just fine until now as i installed it with the Hardware Devices manager, Today i put a new ALFA AWUS036H usb card to work with aircrack. both cards were working together for a while, but as i started playing around with aircrack the broadcom card of the HP has stopped working.

I made a mistake and followed the aircrack tutorial for R8187 / ieee80211 stacks driver, while i'm using RTL 8187 / mac80211 stack drivers, and blacklisted the RTL8187 , rebooted and then both card didn't work. I un-blacklisted it, and the ALFA is working but the broadcom not!

iwconfig shows me only one wireless card on wlan0 the blue light showing activity in the HP card doesn't go on.

Tried to uninstall and reinstall broadcom drivers, still no change.

View 2 Replies


ADVERTISEMENT

Fedora Networking :: Wireless Network Doesn't Work After Kernel Update (Broadcom) / Sort It?

Aug 23, 2009

I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.

Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux

View 2 Replies View Related

OpenSUSE Wireless :: Wifi Doesn't Work On 11.4 KDE X86-64 With Broadcom 4312 / Get It?

Mar 10, 2011

Wifi works on 11.3 with installed the broadcom-wi & broadcom-wl-kmp-desktop,but this trick doesn't work on this new 11.4.

View 9 Replies View Related

Debian Hardware :: Installing Driver For Broadcom Wireless Card Doesn't Work

Aug 29, 2010

I'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...

View 2 Replies View Related

Ubuntu Networking :: Wireless Does Not Work (Broadcom BCM4312)

Jul 28, 2010

I've just installed Ubuntu on 2 computers, and I'm new to it. However I'm not new to computers. The problem I'm currently running into on one of the computers is that the wireless will not detect any connections, despite there being many. The computer is a HP Compaq v6203AU using the wireless card Broadcom BCM4312 [14e4:4312]. I've went through dozens of walkthroughs, encountering errors in every single one of them, I've spent 8 hours on this one problem and extremely frustrated. It seem to be a problem with the driver that comes as default, and I'm lost at what to do.

The terminal command "lspci -nn | grep 14e4" returns the following:
03:00.0 Network Controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312]

ifconfig returns the following:
eth0 Link encap:Ethernet HWaddr 00:23:8b:b2:ab:d3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:20 Base address:0x8000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:96 errors:0 dropped:0 overruns:0 frame:0
TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7072 (7.0 KB) TX bytes:7072 (7.0 KB)

The computer has no internet access as there is nowhere to connect except through wireless.

View 9 Replies View Related

Ubuntu Networking :: Belkin Enhanced Wireless USB Network Adapter - Windows Wireless Drivers App Doesn't Work

Feb 3, 2010

I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:

[code]...

View 1 Replies View Related

OpenSUSE Wireless :: Broadcom 4311 Doesn't Seem To Recognize Wireless Card

May 3, 2011

when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).

View 7 Replies View Related

Fedora Networking :: Doesn't Work After Turned Off Wireless By Pressing A Wireless Button On Laptop?

May 19, 2011

Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.

View 2 Replies View Related

Ubuntu Networking :: Wireless Doesn't Always Work

Nov 15, 2010

I'm running Ubuntu 10.04 on my laptop. Up until about a week ago, my wireless worked fine, but now it rarely connects. Sometimes the connection indicator shows that I am connected, but when I click on it it doesn't show any active networks. Even when I use a wired connection it doesn't always work.

View 3 Replies View Related

Ubuntu Networking :: Kmail Doesn't Work With Wireless?

Aug 11, 2010

I use kmail in kubuntu 8.04. Whenever I have a wired connection, kmail checks email and sends messages just fine. However, any time I switch to wireless, kmail just says "No new messages," without even checking. I am also unable to send email over wireless.

View 5 Replies View Related

Ubuntu Networking :: Wireless Doesn't Work After Updates?

Dec 12, 2010

I got Ubuntu 10.10 installed. Unfortunately, my wireless doesnt work. I'm connected to my router, but web pages wont load.

I thought to myself, maybe Ubuntu needs to update. So I lugged my computer out to the router itself and okugged my computer in. I went into update manager and let it do its thing. It was PAINFULLY slow. I had a less than 100 b/s. But I let it do its thing. After all 200 Mb's were done, which took a couple hours, I rebooted my system. Now, I cant even connect to my wireless and the internet symbol (the wireless bars thing in the top right) is gone.

1) How can I get my wireless to work?

2) How do I get the wireless button back?

View 1 Replies View Related

Ubuntu Networking :: Wireless Wpa/wpe Doesn't Work On KDE But Works On Gnome

Mar 22, 2010

I've recently installed KDE 4.4.1 just to try on a Dell 1545 laptop with Ubuntu 9.10 previously installed.

My problem is that the wireless connection works just perfectly with nm-applet under Gnome, but when I login on KDE and ask KNetworkManager to connect to the same network as before, it can't finish the connection.

When I choose the connection the program asks for my passphrase, I type it and then it just sticks on "activating network" and nothing happens.

My experience with KDE is zero, so I don't even know where to start looking. I'd even tried to kill KNetworkManager and try to replace it with nm-applet, but I think there's a daemon that restarts it immediately.

View 1 Replies View Related

Ubuntu Networking :: Wireless Doesn't Work In 9.10 (lenovo T400)

Apr 12, 2010

I am having trouble with my laptop's wireless. It doesnt work after a normal shut down. The version is 9.10 and my computer is lenovo T400.

Below are some outputs of commonds.

Code:

op@power:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback

[code]....

View 2 Replies View Related

Ubuntu Networking :: Wireless Shows Connection But Doesn't Work

Jun 7, 2010

I just installed Ubuntu on my windows pc with no problems....except for wireless that is. I have a USB Linksys WUSB54G adapter to access my 2WIRE, WEP network. The thing is, it shows up in the top right hand corner. It even gives me the signal strength. But when it comes to using Mozilla, it is never able to access a page. If I try to Ping something, it's unable to. So I thought maybe I need to use ndiswrapper with my .inf and .sys files from the driver for my windows. I installed it, and added the driver to it...everything went O.K. I check it and it says it's installed and working. Again, I can see the wireless networks, and "connect" but when I try to use the connection there is nothing. I have also tried my neighbours non-WEP connection, but it still doesn't work. So I'm sort of at a loss with what I should do now. I see the networks, can "connect" but can't browse. I installed the drivers from my windows, and it still doesn't work. I used a LIVE CD of Knoppix and I can connect to the Network within 30 seconds and start browsing the net.

View 2 Replies View Related

Ubuntu Networking :: D-Link DWA-125 Wireless Adapter Doesn't Work W 10.04?

Sep 7, 2010

Have tried methods from every thread I could find for past 10 hrs. Have tried installing rt3070sta etc.Monitored message log; appears that the driver isn't recognized, though the USB port sees that something is plugged in (when I plug in the adapter, and unplug it).All of the threads miss something; I can't get a wireless port listed under ifconfig no matter what I try. Seems that every method leaves out something (I guess because everyone's box is different in some way). Network manager doesn't help much. Downloaded Wicd, which does even less.I guess I could try ndiswrapper, but I'm scared away by the hundreds of pages I see on going that route; I'm almost certain it wouldn't work (1000 possible points of failure).Does anyone have a strategy to recommend?AM64 box, newly installed Edubuntu 10.04, ran update manager.

View 3 Replies View Related

Ubuntu Networking :: Realtek Wireless Card Doesn't Work

Sep 12, 2010

I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:

[Code]....

View 4 Replies View Related

Ubuntu Networking :: Wireless Doesn't Work - But Recognizes Network?

Sep 20, 2010

I installed Ubuntu on a machine after erasing everything else and the wireless has never worked. It says that the wireless has already shut down even though it recognizes the wireless network and my other non-linux machines see the network and work fine.

View 1 Replies View Related

Ubuntu Networking :: Wireless Doesn't Work Although Card Detected

Oct 20, 2010

I have an issue with wireless connectivity on my laptop. Its a HP dm3 and the intel network adapter is supported as I can scan and detect wireless access points.However, when I attempt to connect to my home network, it fails and this is probably a result of two things: The BSSID is missing and/or the DHCP client ID is missing.I am running Kubuntu 10.10 32 bit

View 2 Replies View Related

Ubuntu Networking :: Wireless Card Doesn't Work Upgrading To 10

Oct 22, 2010

Yes, that's correct, it's a Celeron 400 running Xubuntu. And the card was working on 9.10, but not working anymore in 10.04 neither in 10.10.I've no other idea and I'm really considering moving back to 9.10Is there anything else I can check.

View 6 Replies View Related

Ubuntu Networking :: Ralink Wireless Adaptor Doesn't Work 10.04

Jul 30, 2011

I've ubuntu 10.04 and I can't connect to router wi-fi with my new wireless adaptor usb (ralink 2870). I've tried various guides but nothing. The adaptor work fine with Windows and other linux distributions.

View 5 Replies View Related

Networking :: Intel Wireless Doesn't Work Anymore

Aug 2, 2009

My intel pro wireless 2200 NIC doesn't work anymore. Yesterday it did, but not today (I didn't do anything special, so that it could go wrong).What is ucode and -62? Any ideas? I already checked the forums and found that ipw doesn't work when ndiswrapper is loaded. Well, I don't have it loaded. What happend?

View 8 Replies View Related

Ubuntu Networking :: Wireless Ad Hoc Windows XP ICS - Ping The Desktop Doesn't Work

Feb 8, 2010

how to go about getting Ubuntu to receive an ad-hoc wireless ICS enabled connection. The internet connection is shared through a virtual machine running XP (with the USB wireless dongle under XP's control), on my desktop PC, in order to escape my ISP's no NAT policy. Ubuntu is on both the desktop PC (the sender), and the laptop (the receiver). The desktop and laptop also run windows 7. I managed to get my laptop Ubuntu to connect to my virtual machine XP, by setting the IP, subnet and gateway of all wireless devices, as was suggested in [URL] - I did use the Network Manager GUI, but pinging the desktop doesn't work.

Even with the IP configuration, Windows 7 on the laptop receives the internet fine. The next step is getting Ubuntu to receive. I can do any kind of configuration in a virtual machine, such as install Ubuntu. In virtual machine XP I used 192.168.0.1 with subnet 255.255.255.0 and gateway 1.1.1.1. On the laptop Ubuntu 192.168.0.2 same everything else. I understand nothing about networks. I know there is stuff I can do in the console, but how will Network Manager cope with me doing that?

View 1 Replies View Related

Ubuntu Networking :: Compaq Mini 700EL Wireless Doesn't Work?

Jun 13, 2010

I just installer Ubuntu 10.04 Netbook Remix on my Compaq Mini 700EL, the ubuntu website says that everything works very well including the wireless. But for some reason the list of connection doesn't appear at all. It just says "device not ready" This is driving me a little nuts. It appears that the Broadcom drivers are installed. I typed lspci on the terminal and it says that the computer loads a Broadcom Corporation BCM4312 802.11b/g (rev 01)

I also downloaded the drivers even though they should be already in it. But I'm not sure.

View 1 Replies View Related

Ubuntu Networking :: Wireless Network Doesn't Work With A TPLink PCI Card?

Jun 26, 2010

I'm trying to activate a wireless network on an ubuntu server 10.04. The machine has a TPLink PCI wireless card. Card is well recognized, and scanning for wireless connection it finds correctly the essid of the access point in the room. But when I try:

Code:
$ sudo iwconfig wlan0 essid "apoint" key s:my_key_8
this error is returned:
Code:
Error for wireless request "Set Encode" (8B2A) :

SET failed on device wlan0 ; Invalid argument.I looked for similar situations over many forums, and I found that it could be the card doesn't support the encryption type (My AP uses WPA with TKIP). However if I use an ubuntu desktop live CD on the same machine, I can connect witouth any problem with NetworkManager 0.8.

View 2 Replies View Related

Ubuntu Networking :: Sony Vaio VPCM12M1E Wireless 11.04 Doesn't Work

May 19, 2011

I've been searching all around information, how can I enable wifi, bluetooth and lan on this laptop. However, nothing works for me... rfkill unblock all command doesn't work.

how to do it in short time that would be just great, because I offered to my friend to repair her computer and install 'better' working Linux, but so far I even cannot enable wireless.

View 3 Replies View Related

Networking :: Wireless Doesn't Work At Locations With A Sign-in Page?

Nov 17, 2010

Dell Mini 9, 2GB RAM, 32 GB SSD, Ubuntu 10.04 UNR . At Panera, and other places that have free Internet access but require signing in on a page they load, I cannot get on to the Internet. Their sign-in page comes up on my iPod Touch but does not come up on my DM9. This happens no matter which browser I have running on my DM9 (I have Firefox and Chromium). And since I can't sign in, I don't get onto the Internet. Initially I am connected to their router and the signal is strong but because I don't sign in (I'm assuming here), I am disconnected. What do I need to do to see their sign-in page so I can get connected. At locations that have no sign-in pages I have no problems whether or not a password is required.

View 3 Replies View Related

Ubuntu :: Cannot Get The Broadcom Wireless Chipset To Work More Than 10 Seconds?

May 3, 2011

I regret updating to 11.04. It broke everything during the update. I cannot get the broadcom wireless chipset to work more than 10 seconds, No matter how much research I do here. I have not been able to work within my GDocs for the last three days. Can I restore back to my 10.10 settings? I have an acer laptop.

View 3 Replies View Related

Ubuntu Networking :: LSUSB Command Doesn't Work As Well As Windows Wireless Drivers?

Sep 1, 2011

I can get the command program to work, but not the desktop program to work. Windows Wireless Driver was working, but now every time I try to start it, it won't load, and will just be an empty window. This happened after I tried to installed a driver (which was the wrong one), and I restarted the computer. After this happened, I tried to reinstall the program, but to no avail.

The command program works, but I can't use the command lsusb, because it just pauses and doesn't do anything. Do I have to wait for it to kick in. I'm pretty sure that this is not it, because when I try the lspci, this works fine (but it's not the one I need). Please help, and don't make any stupid replies.

View 3 Replies View Related

Debian :: Can't Get Broadcom Wireless Card To Work

Dec 18, 2015

I decided to start of with Debian. I'm having trouble getting my wireless connection to work. I think i need drivers or something, i can't make a wireless connection. And it is a bit difficult for me, as i am new to Linux, and I'm not sure what I'm doing when i am writing these commands.

My wireless card is a Broadcom Corporation BCM43142 802.11b/g/n

I have been using Raspberry PI a little, so i am familiar with the terminal.

View 3 Replies View Related

OpenSUSE Wireless :: Cannot Get Broadcom WiFi To Work At All

Oct 5, 2010

I've been reading up on how to get the Broadcom BCM4312 802.11b/g on my Dell Inspiron 1525 to work with OpenSUSE and I've tried everything, I've even re-installed the OS 3 times as I seemed to keep screwing something up. I've tried doing what it says in this thread
Install Broadcom Drivers from Packman
I thought I'd installed the write drivers with this code:
Code:
zypper in broadcom-wl broadcom-wl-kmp-default

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved