Ubuntu Networking :: Alfa AWUS036NH Card Not Working With Aircrack-ng

Jun 5, 2011

Im running Ubuntu 11.04 with alfa awus036nh. I first tried to install drivers from alfa disc for RT3070. Everything seemed to be working but i got the imfamous mon0 channel -1 problem with aireplay-ng. Did some research-downloaded and tried different drivers rt2800 rtl 8170. Bottom line is i dont know what THE F*** im doing. I think i installed three different drivers. Now airodump doesnt show any output. Im going crazy. Is linux designed to make ppl go crazy. Windows is calling me to go back to it. THings shouldnt be this complicated. BTW im on a asus laptop with atheros ar 9285 card in it. a breif explanation of how drivers work in linux . Once again maybe im just putting the cart b4 the horse as im only about 2 weeks fresh into ubuntu.

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Alfa AWUS036NH Can't Driver Compile?

Jun 5, 2011

I have a Alfa AWUS036NH that I have downloaded the lastest drivers from Alfa. I have read for 3 days straight and tryed so many fixes I cant remember them all. My problem is that it connects then after about 15 minutes the connection degrades and i have to unplug and replug in and then it goes down sooner each time. I have edited the black list and blacklisted all the 2870 chipsets as mine has 3070 chipset. once i edited the blacklist I can no longer boot into linux unless I unplug my Alfa (usb) and then once I am into the UI I can plug it back in but the wirless management client up by the top right of my screen that came with ubuntu no longer sees the card and when I do the show devices command from a terminal it doesn't show the adapter either. I also have a wired eth0 that works and a wireless wlan0 thats an internal Aethros that works. After blacklisting though it no longer shows it's name in the wireless manager but does show the connections. I am getting errors when trying to compile the manufactors drivers. I have renamed the 2 files as per several posts and still errors. I have read it works if you load the intel 2200 drivers. I got the compiler and everything but am missing the ieee80211 wireless what evers to compile and make it work. I am at wits end at what to do now to fix it.

View 2 Replies View Related

Ubuntu Networking :: Wireless Card Compatible With Aircrack?

May 4, 2010

if i can find out whether my wireless card is compatible with aircrack, after running the lshw -C network command i received these results

*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.

[Code].....

if my wireless card is compatible with aircrack.

View 5 Replies View Related

Ubuntu Networking :: Aircrack Won't Find Wireless Card

Jul 15, 2010

ive just installed the aircrack package in my dell vostro 1310 which i bought with its ordinary wireless card ( hell knows what it is. couldn't find..).At the very first time while trying to reach my wireless internet i was using backtrack 4 and i was not sucesfull.. that would be good normally, but it was not. because i couldnt do it cuz my wireless card wasnt being recognized by airmon..so i tought..i can use my wireless with ubuntu... then i got ubuntu again.. and intalled the aircrack.. as i run it i found ou t that still it wont find my wireless card...do i need any further config. to make it work with aircrack ??i can only find eth0, which is my wired network device....

View 1 Replies View Related

Ubuntu Networking :: Stop Wireless Card Channel Scrolling (aircrack)?

Dec 5, 2010

seems to be working but the card is scrolling through channels while trying to attack a certain channel! how do i stop it?

View 1 Replies View Related

Ubuntu Networking :: Aircrack-ng Is Not Working

Feb 19, 2010

I have an laptop HP6735s (BCM4322 wireless adapter). I have installed drivers for wireless adapter. The problem is aircrack. When I type in: aireplay-ng -9 eth2 .An error appears as:sure RFMON is enabled: run 'airmon-ng start eth2 <#>'sysfs injection support was not found either.

View 1 Replies View Related

Ubuntu Networking :: Get Broadcom Card To Enter Monitor Mode With Aircrack-ng Suite

Jul 20, 2010

I am running Lucid Lynx, kernel 2.6.32.23 generic, I have a card with the Broadcom BCM4311, with the STA Linux Wireless driver. I have no idea how to get monitor mode to work with the Aircrack-ng suite's Airmon-ng command. I use the command: sudo airmon-ng start eth1

And I get this output: Found 5 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to kill (some of) them!

PID Name
883 NetworkManager
893 avahi-daemon
896 avahi-daemon
931 wpa_supplicant

[Code].....

View 4 Replies View Related

Ubuntu Networking :: Bcm43225 And Doesnt Working Aircrack?

Mar 25, 2011

i have Broadcom Corporation BCM43225 and aircrack doesnt working, i think problem is in drivers but i dont know what can i do ... i was looking for but i diddnt find any working ;/

View 8 Replies View Related

Ubuntu Networking :: Trying To Install Aircrack-ng Through Package Manager Not Working

Jan 29, 2010

I just installed ubuntu 9 and I went to package manager to install aircrack-ng version 1:1.0-1 and it says that it has installed but then when i go to applications/internet/aircrack is not shown.

View 1 Replies View Related

Ubuntu Networking :: Getting AWUS036NH To Work With 9.10?

Jan 21, 2010

I bought an Alfa Network AWUS036NH adapter that I want to use with Ubuntu 9.10 Desktop.it looks like it won't connect automatically and the install instructions don't make any sense to me. I've installed from source before, but this is different. See here:

Quote:

Build Instructions:
====================
1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.

2> In Makefile set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX" define the linux kernel source include file path LINUX_SRC modify to meet your need.

[code]....

View 7 Replies View Related

Ubuntu Networking :: ALFA AWUS036H Not Loading Webpages

Feb 12, 2010

I have Ubuntu 9.10 and I am trying to get my ALFA network adapter to work. It shows a few wireless locations including my brother who lives beside me. He is going to let me use his internet on my laptop. His connection is opened and I can connect to it fine... but no sites load... I've tried about 4 other open networks that I picked up and the same thing... it sometimes loads the first page but then thats it... This is suppose to be the best network adapter on the market for under $100. I have a 5dBi ant and a 2.4ghz 6dBi ant.

Oh yea, I've tired this on two other ubuntu 9.10 desktops and 1 laptop and get the same thing... I am however able to connect to my wireless router and browser the internet... but I will not have internet much longer

View 1 Replies View Related

Ubuntu Networking :: ALFA UQ2AWUSO36H. Terminal Not Exceptiing Codes?

Sep 23, 2010

Allright so I installed Ubuntu a week ago, I realized by net is much slower on Ubuntu than on Windows. So I did some Googling and found out I have the wrong drivers.I'm trying to fix it from this link :[URL]When I try to write in Sudo codes into terminal they don't work. They ask for a password, I put mine in and press enter I get the following message :shayan@ubuntu:~$ sudo modprobe rtl8187shayan@ubuntu:~$

View 1 Replies View Related

Ubuntu Networking :: ALFA AWUS036H - Adapter Not Running On Any Channel At All

Dec 8, 2010

I work for a firm of solicitors as the IT guy and I have been asked to assess the security of our network. I have recently bought an ALFA AWUS036H USB wireless adapter to help test the wireless networks. We have a few old devices that only run WEP, which I know from the start is bad. I'm trying to use the adapter with aircack. I issue the command:

[code]...

Now I set the adapter to channel 11 using airmon but running iwlist mon0 channel says the adapter is not running on any channel at all. Has anyone else experienced simular issues, and if so how was this resolved?

View 2 Replies View Related

Ubuntu Networking :: RTL8187L Updated Driver For Kernel 2.6.32/2.6.31 For ALFA AWUS036H

Jan 5, 2010

i have ALFA AWUS036H 500mw wireless card which uses RTL8187L chipset. Ubuntu 9.04 and 9.10 come with preloaded rtl8187 driver but they DO NOT work for internet surfing. However they do work with aircrack suit for injecting etc. Specific problem is: They only work with really close ranged AP, anything far and you will have random disconnects or inability to connect. So basically its unstable compared to patched driver.

To get this alfa card working for internet access, the only way currently is to use any LInux distro with Kernel 2.6.30 and lower. Starting from Kernel 2.6.31 they have made some changes to net api structure which wont let you patch the driver with the patch available at aircrack website which is normally used to make this driver suitable for internet browsing. Refer to this thread for more info: [URL]... I am currently using backtrack 4 pre final but i was going to install kubuntu 9.04 till i recieved an email from realtek with a new driver that compiles in kernel 2.6.31. I tested it on Kubuntu 9.10 and it compiled fine but i could not make it run. Under NetworkManagement for Kubutnu, the problem is that it keeps asking for WEP key and gives me the message 'wlan4 failed to connect' instantly after i enter the key, so its possible that its not compatible with NetworkManagement. I havent tried it with wicd yet, it may work........

View 5 Replies View Related

Ubuntu Networking :: Network Card Working On 10.04 32bit But Not Working On 10.04 64bit!

Jul 25, 2011

I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"

lspci output:

Quote:

02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)

How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?

View 3 Replies View Related

Networking :: Rtl 8187 - Get The Drivers And Patches For Alfa AWUS036EW On BackTrack 5

Jul 28, 2011

I am trying to get the drivers and patches for my alfa AWUS036EW on BackTrack 5 with these instructions: [URL] Everything works until I type make I get this message:

[Code]....

View 12 Replies View Related

Ubuntu Networking :: Alfa Network AWUS036H USB Adapter Chipset Realtek 8187L Disconnects

Sep 13, 2010

I have Ubuntu 10.04 (32 bits) and a wireless usb adaptor Alfa Network AWUS036H with Chipset Realtek 8187L. After a few minutes connected, the adaptor disconnects and I can't reconnect again. I search this forum but I'm not sure about what to do. Do I need to get and install another driver? I need to use the windows driver?

View 5 Replies View Related

Slackware :: Alfa AWUS036h Rtl8187 Adapter Not Working On Slackware 13.1

Oct 13, 2010

I recently bought the Alfa AWUS036h which uses the Realtek rtl8187 chipset. I am able to load the module and connect to any network, but its almost as soon as I try to load a page the connection drops. It never stays connected for more than 30 seconds. My other computers using the same adapter in the same spot work fine, unfortunately there not running slackware. I've tried compiling the newest stable kernel and checked the rd.inet1.conf settings.

View 6 Replies View Related

Ubuntu Networking :: Aircrack Not Showing WEP Key

Aug 15, 2010

I don't know why this happen a lot of time. But my first trial I successful to crack my neighbor WEP key and it write down the password beside that. But now, it doesn't show the decrypted password even the process was successful. Here the url of image [URL].

View 4 Replies View Related

Ubuntu Networking :: Can't Seem To Install Aircrack-ng?

Sep 29, 2010

fertech@fertech-laptop:~$ sudo apt-get install aircrack-ng

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Couldn't find package aircrack-ng
fertech@fertech-laptop:~$

View 1 Replies View Related

Ubuntu Networking :: No ACKs With Aireplay-ng - Aircrack-ng

Mar 12, 2010

I'm having an issue with aircrack-ng, when I use an aireplay-ng I don't get any ACKs from my network.

I'm using a RNX-EASYN1 with a rt3070 chipset on ubuntu 9.10

That's my command:

HTML Code:

And that's what comes up after:

HTML Code:

This one is for my network, but I tried it for some other networks just to check if there's something wrong with my network. But I didn't get any ACKs anyway.

I'm not very familiar with aircrack-ng, because I just started to play with it, please if there's somebody who's good with using an aircrack-ng.

View 8 Replies View Related

Ubuntu Networking :: Aircrack-ng Does Not Find Any APs While Scanning

Dec 31, 2010

I've just bought a GEETEK Hercules USB Wlan adapter, which has the Ralink rt3072 chipset. The Connection manager can find wireless APs, but it won't connect to any of those. Also, aircrack-ng does not find any APs while scanning.After some tinkering and a lot of restarting, I can now connect t wireless networks, although slowly. However, I still can't use it with aircrack-ng.

View 6 Replies View Related

Ubuntu Networking :: Way To Manually Patch Aircrack -ng

Aug 13, 2011

I was wondering if there is a way to manually patch Aircrack -ng with 'airodump-ng-channel-handling-broken-fix.patch' without installing compact wireless package, because I end up with nonfunctional network when I compile compact wireless package. If possible where to paste that patch?

View 3 Replies View Related

Ubuntu Networking :: B43 Error 11.04 - Not Compatible With Aircrack

Sep 1, 2011

I have install the broadcom sta wireless driver on my laptop it works fine but i guess it's not compatible with aircrack cause i cant scan using the wepcrackgui. So I try install b43 driver but I always have the same error when I type on the termial

[code]...

what is going on? Im using Ubuntu natty 11.04

View 5 Replies View Related

Ubuntu Networking :: Crack Wep Network At Home With Aircrack-ng?

Oct 19, 2010

I have an Acer Aspire One -532h and i just installed ubuntu 10. I am trying to crack my own Wep network at home with Aircrack-ng. So after i installed Ubuntu and installed everything in "updatemanager", i installed Aircrack,Macchanger. And as i look in "iwconfig" and ifconfig i see the Atheros driver Ath9k and Wlan0. Now my 1st question. Do i have to install madwifi or such for the aircrack to inject?

2:nd I have tried to install madwifi also but when aireplay-ng want to inject ,the whole computer freezes. How do i fix this?....have looked aound google and found that many have the same trouble...

View 1 Replies View Related

Ubuntu Networking :: Using Aircrack-ng [fixed Channel Mon1?

Feb 2, 2011

I am trying to audit my wireless router due to someone in the neighbourhood hacking it, and have run into a few problems. When I run airodump-ng, everything works fine. However, when I try to get the .csv file and run "airodump-ng -w test --channel 6 --bssid ---------- mon1" (obviously with my the mac address of my AP instead of x's) I get this:

CH 6 ][ Elapsed: 4 s ][ 2011-02-02 17:48 ][ fixed channel mon1: -1 ] The problem is the [ fixed channel mon1: -1 ], because when I go to the next step to try to force a handshake, it says:

18:00:34 Waiting for beacon frame (BSSID:-----------) on channel -1
18:00:34 mon1 is on channel -1, but the AP uses channel 6

I have scoured the Internet for answers, and have seen several people with the same problem, but no solutions that work for me. I think it may have something to do with the driver. I really do apologise if this has been answered properly several times, but none of the solutions seem to be working in my case.

View 2 Replies View Related

Ubuntu Networking :: Setting Up Intel Pro 3945ABG For Aircrack?

Feb 22, 2011

I've always wanted to learn this branch of computing, and I do think it's rather interesting. So, I was following in unison both this and this, which so far just tell me to download ipwraw-ng and extract it, but when I cd into the folder, and say make, I get this:

Code:
ibo@ibo-laptop:~$ cd Desktop/ipwraw-ng/
ibo@ibo-laptop:~/Desktop/ipwraw-ng$ make
WARNING: $SHELL not set to bash.

[Code].....

View 3 Replies View Related

Ubuntu Networking :: Patch Ipw2200 For Aircrack Injection?

Apr 29, 2011

how to patch it. but the problem is, I can't find a working download link.

View 1 Replies View Related

Ubuntu Networking :: Alfa AWUS036H Adjust Power - Unknown Transmit Power Information

Jun 21, 2010

I am using Ubuntu 10.04 64-bit and I purchased a new ALFA AWUS036H wireless card. I would like to know if this "1Watt" wireless card is configured for full power. iwlist wlan0 txpower results:

wlan0 unknown transmit-power information. Current Tx-Power=27 dBm (501 mW). It appears to me that I should be able to increase the power. "iwpriv wlan0 highpower 1" does not work. Do I need to patch the new default driver that comes with Ubuntu 10.04 64-bit with the aircrack one following these directions:[URL]...? Monitor mode and a injection tests seem to work fine with the driver I have installed.

View 2 Replies View Related

Ubuntu Networking :: Can't Get The Wireless Card Working?

May 13, 2010

I've installed 10.04 on a Dell 1200 laptop and cannot get the wireless card working. I've tried getting Ndiswrapper but it doesn't appear to be available on 10.04, and since I don't have an Internet connection, I can't download it. The card is a Broadcom Corp BCM4306 802.11 b/g. How do I get the card connecting to my Linsksys?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved