Ubuntu Networking :: Activate Wireless Network Interface In Terminal?

Feb 26, 2010

running 9.10 server, have SSH access through LAN, but I'd like to move box out of my neighbor's (shared internet & the router's in his place) and into my own space. Would have done so already, but I can't get the wireless working. Details below:lshw -C network gives:

Code:
*-network:0 DISABLED
description: Wireless interface

[code]....

View 2 Replies


ADVERTISEMENT

Debian :: Activate Wireless Interface - Copy All Files For Wireless From Ubuntu

May 17, 2010

I installed Debian 5.04. The Debian installer picked the Ethernet card but not the wireless (Atheros 9285). I followed these instructions to install it (found at [URL]...

[code]...

But there was no wireless interface shown in the network interfaces entry of hardinfo, even though I wrote modprobe ath_pci in terminal window. My questions are: 1. I followed the instructions regarding updating the madwifi sources, installing them etc. Does this guarantee that apt downloaded and installed the right madwifi driver? 2. Will I be better off if I try to install the driver downloaded from the Atheros website? 3. How can I activate the wireless interface (since the driver is running should not the wireless interface somehow show up automatically)? 4. When I am running Ubuntu 9.10 it picks up the wireless. Can I somehow copy all the files for the wireless from Ubuntu and paste them in the Debian filesystem?

View 2 Replies View Related

Fedora Networking :: Wireless Network Card Being Detected But Not Being Allowed To Activate?

Mar 7, 2009

I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found

View 2 Replies View Related

Ubuntu Networking :: Unable To Activate Ethernet - No MII Interface Found

Mar 12, 2010

I have tried the command on ubantu workstation but it giving error : # mii-tools SIOCGMIIPHY on 'eth1' failed: operationsnot support. no MII interface found.

Internet not working. tell me anonymous of kudzu command in fedora.

View 4 Replies View Related

OpenSUSE Network :: Start Network Interface At Virtual Terminal

Mar 1, 2010

I would like to use zypper to update openSUSE 11.2 through the Virtual Terminals (tty1 thro' tty6).

Network Interface is wlan0 (Wireless LAN, home network through a Router) that requires a password using WPA2.

My question is how to start wlan0 through the command-line ?

View 9 Replies View Related

Ubuntu Networking :: Connect To Wireless Network Via Terminal?

Dec 28, 2010

I wonder how we can to connect a wireless network via terminal if we use a minimal *buntu in command line, without network manager. I've found some old threads in ubuntuforums but I still can't figure out.

View 6 Replies View Related

Networking :: Cannot Establish A Wireless Network Connection From The Terminal In Ubuntu 10.10

Jan 27, 2011

I'm trying to connect to a hidden wireless network in ubuntu through the terminal but i am unable to do so.

I first tried using ifconfig,iwconfig and dhclient initially but i am only able to get an ip address without the default gateway and dns server addresses which i normally get through the network manager applet.

Then i tried using cnetworkmanager but failed miserably again i keep getting this error

Code:

Another applet is running: Bus name already exists: org.freedesktop.NetworkManagerUserSettings (pid 1851)

Then i used nmcli available with the network manager package. i was able to establish a connection only with the connections showed in the list. i use a hidden wireless network. i am unable to connect to the hidden wireless network using nmcli without actually creating a connection from the network manager applet.

View 2 Replies View Related

CentOS 5 Networking :: How To Activate Eth0 On Terminal

Mar 4, 2009

how can i activate eth0 on terminal ?

View 1 Replies View Related

Networking :: Prevent Auto Up An Interface At /etc/network/interface File ?

Jul 18, 2011

I have a ppp0 entry with post-up options like this

mapping ppp0
map none photon-plus motorola
map timeout: 12

[code]...

View 8 Replies View Related

Ubuntu Networking :: How To Activate The Wireless In 10.4

Sep 3, 2010

when I start Ubuntu with the test CD my wireless works fine/good/explended... but... when I Install ubuntu the wireless does not work? I only need to know how to activate the wireless in ubuntu? In LinuxLime it works fine..

View 3 Replies View Related

Ubuntu Networking :: Wireless Card Will Not Activate

Mar 31, 2010

Broadcom sta driver is installed and listed in Hardware Drivers but will no activate.It did activate and run perfectly when booting from USB FLASH DRIVE running UNR on HP MINI it has a external networkcard power off switch on the front of it if that matters.

View 7 Replies View Related

Ubuntu Networking :: Cannot Activate Detect Wireless Driver

Sep 28, 2010

I installed ubuntu 10.04 alternate version recently. I am able to install broadcom STA wireless driver for model 4321. Even if it is listed under System>Hardware Driver, it gives me an error when I try to activate it. It asks me to read the file var/log/jockey.log.

I read the file and i found this:

/sys/module/wl/drivers does not exist, cannot rebind wl drivers.

BroadcomWLHandler Enabled(). knod disabled, bcm43xx: blacklisted, b43: blacklisted, b43: blacklisted.

View 5 Replies View Related

Ubuntu Networking :: How To Activate/install Wireless On LIVE

Jun 1, 2011

I'm working on an Ubuntu Live 10.10 (Maverick) and I'm trying to make my wireless Broadcom card to work. Installing Ubuntu on the hard disk there's no problem activating it, but unfortunately in the lately I'm working ONLY on the Live version (from a USB Flash drive).

Under Ubuntu Live I tried to Activate the "Broadcom STA wireless driver" but, after downloading, it returns an error saying a very few detailed error:

"SystemError: installArchives() failed"

... and I cannot understand where is the problem or what to do to solve it. I already tried to run "jockey-gtk" with "sudo" but it is not a permission issue. The error came out anyway.

View 2 Replies View Related

Ubuntu Networking :: 9.10 - How To Activate Network Connection

Aug 10, 2010

How ubuntu 9.10 netbook is36 activate its network connection?

View 4 Replies View Related

Ubuntu Networking :: Re-activate Network Icon

Nov 22, 2010

i'm try to find what i can do to reactivate the network icon (where i can select the wifi network i want to connect), which are usualy on the 'tableau de bord'

View 2 Replies View Related

Fedora Networking :: Can't Activate Wireless AR5212?

Aug 31, 2009

Have an AR5212 802.11 abg. When I try to activate it, the activate button is greyed ou

View 2 Replies View Related

Networking :: Unable To Activate Wireless In Kubuntu 11.04

Jul 5, 2011

i installed kubuntu 11.04 on my hp-g62 laptop and i'm using a wireless router to connect to the internet.. but i'm unable to use the wireless network. So i would like to know as to how to enable the wireless settings in kubuntu?

View 1 Replies View Related

Ubuntu Networking :: Unable To Activate Broadcom STA Wireless Driver?

Feb 4, 2010

I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :

Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log

[code]....

View 9 Replies View Related

Ubuntu Networking :: Activate Wireless Drivers With No Ethernet Connection?

Sep 26, 2010

I'm been wanting to try Ubuntu for a while now, and when my mom's netbook started to get insanely slow with WinXP, I tried the Netbook Remix on a USB stick. I LOVE it, except I am unable to get the wireless working, which is the only thing stopping me right now from a full install.

I believe my problem is that I need to activate the two drivers "Broadcom B43 wireless driver" and "Broadcom STA wireless driver" which appear as unactivated when I go into the hardware drivers admin tools. Unfortunately this netbook (HP Mini Netbook FW376UA) does not have an Ethernet port, so I can't just temporarily hard wire it to activate these drivers.

So my main questions are: 1) How can I activate those drivers without an internet connection?, and 2) Do you think that activating these drivers is indeed the answer to getting the wireless working?

The details:
Machine: HP Mini Netbook FW376UA
Network Controller: Broadcom Corporation BCM4312 802.11b/g
Ubuntu version: Ubuntu 10.04 Netbook

View 4 Replies View Related

Ubuntu Networking :: 11.04 Broadcom STA Wireless Drivers Won't Activate Or Uninstall?

May 3, 2011

I have a fresh install of 11.04. I am trying to install the "additional drivers" Broadcom STA wireless on my dell laptop. The drivers worked correctly pre-install on the boot up test run, but now they won't activate or uninstall.

On activation attempt, it says : installation of this driver failed. Please have a look at the log.

The log reads: Quote:

2011-05-03 11:49:06,603 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,637 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,679 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted

[Code]...

View 9 Replies View Related

Ubuntu Networking :: Unable To Activate Wireless ( Sta Driver Broken )?

Jul 29, 2011

for over at week i have been trying to get my wireless card to work now. If i open Additional drivers, the non proprietary driver seems to be working and active. If i deactivate that and use the STA driver instead, it says active, but currently not in use. When i use the non proprietary driver, i can check mark on 'activate wireless', but nothing happens. When i use the STA driver there are no wireless options. I'm not sure if its important, but when i do "sudo lshw -C network" when the STA driver is active but not in use, the network status changes from 'disabled' to 'unclaimed'. When i came here, i tried to install "firmware-b43-lpphy-installer" as the sticky said i should, but the installation fails. It says my card is not supported: "Not supported card here (PCI id 14e4:4727)!"

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Network Connection - Need To Activate B43 Drivers

Sep 29, 2010

New to ubuntu. I love the OS. Everything works great except for the network connection. It tells me I need to activate the b43 drivers with fwcutter, but here are the following problems:
1) I can't download and install the drivers b/c I can't connect to the internet wired or wireless.
2) I can't find the website to download the appropriate drivers (I've looked for hours)
3)I'm not too sure how to install them since I don't have a background in coding.
I really like ubuntu, I just need network working.

View 9 Replies View Related

Ubuntu Networking :: Network Manager Is Missing - Activate?

Mar 10, 2011

My Network manager is missing (it is usually has a short-cut on the desktop-bar, which are monitor pictures, next to the sound short-cut). Does anybody know how to activate it again (terminal-based command or etc)? See my attachment, i made a circle sign on the missing network-manager.

View 3 Replies View Related

Networking :: Cannot Activate Network Device Etho

May 21, 2010

Cannot activate network device eth0!" device eth0 does not seem to be present, delaying initialization". i cannot find my network card while i set up network configuration

View 8 Replies View Related

Ubuntu Networking :: Can't Get Wireless Connectivity Because The STA Driver For Bcm4312 Fails To Activate

Nov 13, 2010

I have just upgraded to 10.04 and can't get wireless connectivity because the STA driver for bcm4312 fails to activate. Does this sound familiar to anyone? I had had similar problems in 9.10 and tried to install bcmwl-kernel-source which apparently caused errors in the upgrade process. Not sure if this is part of the problem.

View 5 Replies View Related

Ubuntu Networking :: Configuring The Network Interface Via Dhcp - Network Messages - Code: 00 55 89 E5 0f 1f 44 00 00 Fa 5d C3 90 8d 74 26

Apr 7, 2011

I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.

[87.186415] Stack:

Why I am getting this messages and more importantly how do I get rid of them.

The installation is on a VM on Hyper-V.

View 1 Replies View Related

OpenSUSE Wireless :: Wireless Not Working \ When Click On Networking Panel, It Says WLAN Interface Is Unavailable?

Jul 8, 2011

I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:

root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.

[code]....

View 9 Replies View Related

Fedora Networking :: Cannot Activate Via System-config-network?

May 28, 2009

I've been running F10 since it first came out, and I was happy to see it was the first Fedora release that automatically recognized my Atheros wireless card. I have to run system-config-network and press the "activate" button when I start the machine, but that's ok and no big deal. But today, for whatever reason,in system-config-network, the "activate" and "deactivate" buttons are grayed out and I cannot start the device so I have no network access. When I boot the machine into Windows, it works fine.

View 2 Replies View Related

Fedora Networking :: Can't Activate Network Device Wlan0

Jul 22, 2009

Having trouble with wireless and FC11, eth0 is ok. When I try to activate wlan0 through system-config-network 1.5.97, I get msg: Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0... failed. This is a compaq laptop.

<uname -r>
2.6.29.6-213.fc11.i686.PAE #1 SMP Tue Jul 7 20:59:29 EDT 2009 i686 athlon i386 GNU/Linux
<lspci>
The wireless card is Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter
(rev 01)

View 7 Replies View Related

Ubuntu Networking :: Use The Hardware Drivers Program To Activate Broadcom STA Wireless Driver

Aug 27, 2010

So I just recently migrated from Vista to Linux, I'm running Ubuntu Studio 10.04 on a HP Pavilion DV6700 with a Broadcom BCM 4312 b/g frequencies wifi adapter. I followed one guide telling me to use the hardware drivers program to activate Broadcom STA wireless driver, but whenever i attempt to do so it says "SystemError: InstallArchives() failed". Can anyone help?? (BTW i am not that adept with the Linux operating as of yet)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved